git-apply: Fix removal of new trailing blank lines.
The earlier code removed one newline too many from the hunk that
adds new lines at the end of the file. Also the way the code
counted the added blank lines was somewhat roundabout; I think
the way updated code does it is more direct and easier to
follow:
* We keep track of the number of blank lines added;
* While processing each line, we notice if it adds a blank
line, and increment the counter, or reset it to zero
otherwise;
* When actually we apply the data, we remove the empty lines we
counted earlier if we are applying it at the end of the
file.
git-repack --max-pack-size: add option parsing to enable feature
Add --max-pack-size parsing and usage messages.
Upgrade git-repack.sh to handle multiple packfile names,
and build packfiles in GIT_OBJECT_DIRECTORY not GIT_DIR.
Update documentation.
Signed-off-by: Dana L. How <danahow@gmail.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
git-repack --max-pack-size: split packs as asked by write_{object,one}()
Rewrite write_pack_file() to break to a new packfile
whenever write_object/write_one request it, and
correct the header's object count in the previous packfile.
Change write_index_file() to write an index
for just the objects in the most recent packfile.
Signed-off-by: Dana L. How <danahow@gmail.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
With --max-pack-size, generate the appropriate write limit
for each object and check against it before each group of writes.
Update delta usability rules to handle base being in a previously-
written pack. Inline sha1write_compress() so we know the
exact size of the written data when it needs to be compressed.
Detect and return write "failure".
Signed-off-by: Dana L. How <danahow@gmail.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
git-repack --max-pack-size: new file statics and code restructuring
Add "pack_size_limit", the limit specified by --max-pack-size,
"written_list", the list of objects written to the current pack,
and "nr_written", the number of objects in written_list.
Put "base_name" at file scope again and add forward declarations.
Move write_index_file() call from cnd_pack_objects() to
write_pack_file() since only the latter will know how
many times to call write_index_file().
Signed-off-by: Dana L. How <danahow@gmail.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
Alter sha1close() 3rd argument to request flush only
update=0 suppressed writing the final SHA-1 but was not used.
Now final=0 suppresses SHA-1 finalization, SHA-1 writing,
and closing -- in other words, only flush the buffer.
Signed-off-by: Dana L. How <danahow@gmail.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
Add an option to git-ls-tree to display also the size of blob
Add -l/--long option to git-ls-tree command, which displays
object size of a blob entry. Object size is placed after
object id (left-justified with minimum width of 7 characters).
For non-blob entries `-' is used.
Rationale: for non-blob entries size of an object has no much
meaning, and is not very interesting. Moreover, in planned
pack v4 tree objects would be constructed on demand, so tree
size would need to be calculated.
Signed-off-by: Jakub Narebski <jnareb@gmail.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
This also adds a --remote option to send-pack, which specifies the
configured remote being used. It is provided automatically by
git-push, and must match the url (which is still needed, since there
could be multiple urls).
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
Move remote parsing into a library file out of builtin-push.
The new parser is different from the one in builtin-push in two ways:
the default is to use the current branch's remote, if there is one,
before "origin"; and config is used in preference to remotes.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
This patch introduces --extended-regexp and --regexp-ignore-case options to
tune what kind of patterns the pattern-limiting options (--grep, --author,
...) accept.
Signed-off-by: Petr Baudis <pasky@suse.cz> Signed-off-by: Junio C Hamano <junkio@cox.net>
* maint:
annotate: make it work from subdirectories.
git-config: Correct asciidoc documentation for --int/--bool
t1300: Add tests for git-config --bool --get
unpack-trees.c: verify_uptodate: remove dead code
Use PATH_MAX instead of TEMPFILE_PATH_LEN
branch: fix segfault when resolving an invalid HEAD
* maint-1.5.1:
annotate: make it work from subdirectories.
git-config: Correct asciidoc documentation for --int/--bool
t1300: Add tests for git-config --bool --get
unpack-trees.c: verify_uptodate: remove dead code
Use PATH_MAX instead of TEMPFILE_PATH_LEN
branch: fix segfault when resolving an invalid HEAD
Specifying --detect-branches is now only needed for the initial clone/sync.
Afterwards it's turned on implicitly if more p4 branches than remotes/p4/master
are found.
Signed-off-by: Simon Hausmann <shausman@trolltech.com>
Use git format-patch and git apply --apply when extracting patches from git and
applying them to a Perforce checkout. This should make it possible to apply git
commits with binary files that cannot be handled by path.
* np/pack:
deprecate the new loose object header format
make "repack -f" imply "pack-objects --no-reuse-object"
allow for undeltified objects not to be reused
git-svn: don't minimize-url when doing an init that tracks multiple paths
I didn't have a chance to test the off-by-default minimize-url
stuff enough before, but it's quite broken for people passing
the --trunk/-T, --tags/-t, --branches/-b switches to "init" or
"clone" commands.
Additionally, follow-parent functionality seems broken when we're
not connected to the root of the repository.
Default behavior for "traditional" git-svn users who only track
one directory (without needing follow-parent) should be
reasonable, as those users started using things before
minimize-url functionality existed.
Behavior for users more used to the git-svnimport-like command
line will also benefit from a more-flexible command-line than
svnimport given the assumption they're working with
non-restrictive read permissions on the repository.
I hope to properly fix these bugs when I get a chance to in the
next week or so, but I would like to get this stopgap measure of
reverting to the old behavior as soon as possible.
Signed-off-by: Eric Wong <normalperson@yhbt.net> Signed-off-by: Junio C Hamano <junkio@cox.net>
git-svn: avoid crashing svnserve when creating new directories
When sorting directory names by depth (slash ("/") count) and
closing the deepest directories first (as the protocol
requires), we failed to put the root baton (with an empty string
as its key "") after top-level directories (which did not have
any slashes).
This resulted in svnserve being in a situation it couldn't
handle and caused a segmentation fault on the remote server.
This bug did not affect users of DAV and filesystem repositories.
Signed-off-by: Eric Wong <normalperson@yhbt.net> Confirmed-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <junkio@cox.net>
The todo list at the end of the user manual says that something must be
said about .gitignore. Also, there seems to be a lack of documentation
on how to choose between the various types of ignore files (.gitignore
vs. .git/info/exclude, etc.).
This patch adds a section on ignoring files which try to introduce how
to tell git about ignored files, and how the different strategies
complement eachother.
The syntax of exclude patterns is explained in a simplified manner, with
a reference to git-ls-files(1) which already contains a more thorough
explanation.
I don't really want to look like we're encouraging the shared repository
thing. Take down some of the argument for using purely
single-developer-owned repositories and collaborating using patches and
pulls instead.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
The embarassing history of this tutorial is that I started it without
really understanding the index well, so I avoided mentioning it.
And we all got the idea that "index" was a word to avoid using around
newbies, but it was reluctantly mentioned that *something* had to be
said. The result is a little awkward: the discussion of the index never
actually uses that word, and isn't well-integrated into the surrounding
material.
Let's just go ahead and use the word "index" from the very start, and
try to demonstrate its use with a minimum of lecturing.
Also, remove discussion of using git-commit with explicit filenames.
We're already a bit slow here to get people to their first commit, and
I'm not convinced this is really so important.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Merge branch 'maint' of git://linux-nfs.org/~bfields/git into maint
* 'maint' of git://linux-nfs.org/~bfields/git:
user-manual: reorganize public git repo discussion
user-manual: listing commits reachable from some refs not others
user-manual: introduce git
user-manual: add a "counting commits" example
user-manual: move howto/using-topic-branches into manual
user-manual: move howto/make-dist.txt into user manual
Documentation: remove howto's now incorporated into manual
user-manual: move quick-start to an appendix
glossary: expand and clarify some definitions, prune cross-references
user-manual: revise birdseye-view chapter
Add a birdview-on-the-source-code section to the user manual
git-rev-list(1) talks about patterns as values for the
--grep, --committed etc. parameters, without going into detail.
This patch mentions that these patterns are actually regexps.
Signed-off-by: Petr Baudis <pasky@suse.cz> Signed-off-by: Junio C Hamano <junkio@cox.net>
Fix crlf attribute handling to match documentation
gitattributes.txt says, of the crlf attribute:
Set::
Setting the `crlf` attribute on a path is meant to mark
the path as a "text" file. 'core.autocrlf' conversion
takes place without guessing the content type by
inspection.
That is to say that the crlf attribute does not force the file to have
CRLF line endings, instead it removes the autocrlf guesswork and forces
the file to be treated as text. Then, whatever line ending is defined
by the autocrlf setting is applied.
However, that is not what convert.c was doing. The conversion to CRLF
was being skipped in crlf_to_worktree() when the following condition was
true:
action == CRLF_GUESS && auto_crlf <= 0
That is to say conversion took place when not in guess mode (crlf attribute
not specified) or core.autocrlf set to true. This was wrong. It meant
that the crlf attribute being on for a given file _forced_ CRLF
conversion, when actually it should force the file to be treated as
text, and converted accordingly. The real test should simply be
auto_crlf <= 0
That is to say, if core.autocrlf is falsei (or input), conversion from
LF to CRLF is never done. When core.autocrlf is true, conversion from
LF to CRLF is done only when in CRLF_GUESS (and the guess is "text"), or
CRLF_TEXT mode.
Similarly for crlf_to_worktree(), if core.autocrlf is false, no conversion
should _ever_ take place. In reality it was only not taking place if
core.autocrlf was false _and_ the crlf attribute was unspecified.
Signed-off-by: Andy Parkins <andyparkins@gmail.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
git-archive: convert archive entries like checkouts do
As noted by Johan Herland, git-archive is a kind of checkout and needs
to apply any checkout filters that might be configured.
This patch adds the convenience function convert_sha1_file which returns
a buffer containing the object's contents, after converting, if necessary
(i.e. it's a combination of read_sha1_file and convert_to_working_tree).
Direct calls to read_sha1_file in git-archive are then replaced by calls
to convert_sha1_file.
Since convert_sha1_file expects its path argument to be NUL-terminated --
a convention it inherits from convert_to_working_tree -- the patch also
changes the path handling in archive-tar.c to always NUL-terminate the
string. It used to solely rely on the len field of struct strbuf before.
archive-zip.c already NUL-terminates the path and thus needs no such
change.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <junkio@cox.net>
user-manual: reorganize public git repo discussion
Helping a couple people set up public repos recently, I wanted to point
them at this piece of the user manual, but found it wasn't as helpful as
it could be:
- It starts with a big explanation of why you'd want a public
repository, not necessary in their case since they already knew
why they wanted that. So, separate that out.
- It skimps on some of the git-daemon details, and puts the http
export information first. Fix that.
Also group all the public repo subsections into a single section, and do
some miscellaneous related editing.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
user-manual: move howto/using-topic-branches into manual
Move howto/using-topic-branches into the user manual as an example for
the "sharing development" chapter. While we're at it, remove some
discussion that's covered in earlier chapters, modernize somewhat (use
separate-heads setup, remotes, replace "whatchanged" by "log", etc.),
and replace syntax we'd need to explain by syntax we've already covered
(e.g. old..new instead of new ^old).
The result may not really describe what Tony Luck does any more.... Hope
that's not annoying.
Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
user-manual: move howto/make-dist.txt into user manual
There seems to be a perception that the howto's are bit-rotting a
little. The manual might be a more visible location for some of them,
and make-dist.txt seems like a good candidate to include as an example
in the manual.
For now, incorporate much of it verbatim. Later we may want to update
the example a bit.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Documentation: remove howto's now incorporated into manual
These two howto's have both been copied into the manual. I'd rather not
maintain both versions if possible, and I think the user-manual will be
more visible than the howto directory. (Though I wouldn't mind some
duplication if people really like having them here.)
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
The quick start interrupts the flow of the manual a bit. Move it to
"appendix A" but add a reference to it in the preface. Also rename the
todo chapter to "appendix B", and revise the preface a little.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
glossary: expand and clarify some definitions, prune cross-references
Revise and expand some of the definitions in the glossary, based in part
on a recent thread started by a user looking for help with some of the
jargon. I've borrowed some of the language from Linus's email on that
thread. (I'm assuming standing permission to plagiarize Linus's
email....)
Also start making a few changes to mitigate the appearance of
"circularity" mentioned in that thread:
- feel free to use somewhat longer definitions and to explain
some things more than once instead of relying purely on
cross-references
- don't use cross-references when they're redundant: eliminate
self-references and repeated references to the same entry.
Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
gitweb: Allow arbitrary strings to be dug with pickaxe
Currently, there are rather draconian restrictions on the strings accepted
by the pickaxe search, which degrades its usefulness for digging in code
significantly. This patch remedies mentioned limitation.
Signed-off-by: Petr Baudis <pasky@suse.cz> Signed-off-by: Junio C Hamano <junkio@cox.net>
The 'grep' type of search greps the currently selected tree for given
regexp and shows the results in a fancy table with links into blob view.
The number of shown matches is limited to 1000 and the whole feature
can be turned off (grepping linux-2.6.git already makes repo.or.cz a bit
unhappy).
This second revision makes it in documentation explicit that grep accepts
regexps, and makes grep accept extended regexps instead of basic regexps.
Signed-off-by: Petr Baudis <pasky@suse.cz> Signed-off-by: Junio C Hamano <junkio@cox.net>
Currently, searchbar font was as big as the page heading font, because
font-size was made relative - but to the parent element, which was for some
reason indeed page_header. Since that seems to be illogical to me, I just
moved the div.search outside of div.page_header. I'm no CSS/DOM expert but
no adverse effects were observed by me.
Signed-off-by: Petr Baudis <pasky@suse.cz> Signed-off-by: Junio C Hamano <junkio@cox.net>
gitweb: Fix error in git_patchset_body for deletion in merge commit
Checking if $diffinfo->{'status'} is equal 'D' is no longer the way to
check if the file was deleted in result. For merge commits
$diffinfo->{'status'} is reference to array of statuses for each
parent. Use the fact that $diffinfo->{'to_id'} is all zeros as sign
that file was deleted in result.
Signed-off-by: Jakub Narebski <jnareb@gmail.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
git-gui: Gracefully handle bad TCL_PATH at compile time
Petr Baudis pointed out the main git.git repository's Makefile dies
now if git-gui 0.7.0-rc1 or later is being used and TCL_PATH was not
set to a working tclsh program path. This breaks people who may have
a working build configuration today and suddenly upgrade to the latest
git release.
The tclIndex is required for git-gui to load its associated lib files,
but using the Tcl auto_load procedure to source only the files we need
is a performance optimization. We can emulate the auto_load by just
source'ing every file in that directory, assuming we source class.tcl
first to initialize our crude class system.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>