Continuing with the idea to programmatically enumerate various
pieces of data required for command line completion, the codebase
has been taught to enumerate options prefixed with "--no-" to
negate them.
* nd/completion-negation:
completion: collapse extra --no-.. options
completion: suppress some -no- options
parse-options: option to let --git-completion-helper show negative form
When user edits the patch in "git add -p" and the user's editor is
set to strip trailing whitespaces indiscriminately, an empty line
that is unchanged in the patch would become completely empty
(instead of a line with a sole SP on it). The code introduced in
Git 2.17 timeframe failed to parse such a patch, but now it learned
to notice the situation and cope with it.
"git fetch-pack --all" used to unnecessarily fail upon seeing an
annotated tag that points at an object other than a commit.
* jk/fetch-all-peeled-fix:
fetch-pack: test explicitly that --all can fetch tag references pointing to non-commits
fetch-pack: don't try to fetch peel values with --all
"git send-pack --signed" (hence "git push --signed" over the http
transport) did not read user ident from the config mechanism to
determine whom to sign the push certificate as, which has been
corrected.
* ms/send-pack-honor-config:
builtin/send-pack: populate the default configs
The recent addition of "partial clone" experimental feature kicked
in when it shouldn't, namely, when there is no partial-clone filter
defined even if extensions.partialclone is set.
* jh/partial-clone:
list-objects: check if filter is NULL before using
* ab/refspec-init-fix:
refspec: initalize `refspec_item` in `valid_fetch_refspec()`
refspec: add back a refspec_item_init() function
refspec: s/refspec_item_init/&_or_die/g
* sb/plug-misc-leaks:
sequencer.c: plug mem leak in git_sequencer_config
sequencer.c: plug leaks in do_pick_commit
submodule--helper: plug mem leak in print_default_remote
refs/packed-backend.c: close fd of empty file
"git fetch --shallow-since=<cutoff>" that specifies the cut-off
point that is newer than the existing history used to end up
grabbing the entire history. Such a request now errors out.
* nd/reject-empty-shallow-request:
upload-pack: reject shallow requests that would return nothing
"git remote update" can take both a single remote nickname and a
nickname for remote groups, and the completion script (in contrib/)
has been taught about it.
* ls/complete-remote-update-names:
completion: complete remote names too
Separate "rebase -p" codepath out of "rebase -i" implementation to
slim down the latter and make it easier to manage.
* ag/rebase-p:
rebase: remove -p code from git-rebase--interactive.sh
rebase: use the new git-rebase--preserve-merges.sh
rebase: strip unused code in git-rebase--preserve-merges.sh
rebase: introduce a dedicated backend for --preserve-merges
Continuing with the idea to programatically enumerate various
pieces of data required for command line completion, teach the
codebase to report the list of configuration variables
subcommands care about to help complete them.
* nd/complete-config-vars:
completion: complete general config vars in two steps
log-tree: allow to customize 'grafted' color
completion: support case-insensitive config vars
completion: keep other config var completion in camelCase
completion: drop the hard coded list of config vars
am: move advice.amWorkDir parsing back to advice.c
advice: keep config name in camelCase in advice_config[]
fsck: produce camelCase config key names
help: add --config to list all available config
fsck: factor out msg_id_info[] lazy initialization code
grep: keep all colors in an array
Add and use generic name->id mapping code for color slot parsing
Clean up tests in t6xxx series about 'merge' command.
* en/merge-recursive-tests:
t6036: prefer test_when_finished to manual cleanup in following test
t6036, t6042: prefer test_cmp to sequences of test
t6036, t6042: prefer test_path_is_file, test_path_is_missing
t6036, t6042: use test_line_count instead of wc -l
t6036, t6042: use test_create_repo to keep tests independent
"git diff" compares the index and the working tree. For paths
added with intent-to-add bit, the command shows the full contents
of them as added, but the paths themselves were not marked as new
files. They are now shown as new by default.
"git apply" learned the "--intent-to-add" option so that an
otherwise working-tree-only application of a patch will add new
paths to the index marked with the "intent-to-add" bit.
* nd/diff-apply-ita:
apply: add --intent-to-add
t2203: add a test about "diff HEAD" case
diff: turn --ita-invisible-in-index on by default
diff: ignore --ita-[in]visible-in-index when diffing worktree-to-tree
* ds/commit-graph-lockfile-fix:
commit-graph: fix UX issue when .lock file exists
commit-graph.txt: update design document
merge: check config before loading commits
commit: use generation number in remove_redundant()
commit: add short-circuit to paint_down_to_common()
commit: use generation numbers for in_merge_bases()
ref-filter: use generation number for --contains
commit-graph: always load commit-graph information
commit: use generations in paint_down_to_common()
commit-graph: compute generation numbers
commit: add generation number to struct commit
ref-filter: fix outdated comment on in_commit_list
The in-core "commit" object had an all-purpose "void *util" field,
which was tricky to use especially in library-ish part of the
code. All of the existing uses of the field has been migrated to a
more dedicated "commit-slab" mechanism and the field is eliminated.
* nd/commit-util-to-slab:
commit.h: delete 'util' field in struct commit
merge: use commit-slab in merge remote desc instead of commit->util
log: use commit-slab in prepare_bases() instead of commit->util
show-branch: note about its object flags usage
show-branch: use commit-slab for commit-name instead of commit->util
name-rev: use commit-slab for rev-name instead of commit->util
bisect.c: use commit-slab for commit weight instead of commit->util
revision.c: use commit-slab for show_source
sequencer.c: use commit-slab to associate todo items to commits
sequencer.c: use commit-slab to mark seen commits
shallow.c: use commit-slab for commit depth instead of commit->util
describe: use commit-slab for commit names instead of commit->util
blame: use commit-slab for blame suspects instead of commit->util
commit-slab: support shared commit-slab
commit-slab.h: code split
The bulk of "git submodule foreach" has been rewritten in C.
* pc/submodule-helper-foreach:
submodule: port submodule subcommand 'foreach' from shell to C
submodule foreach: document variable '$displaypath'
submodule foreach: document '$sm_path' instead of '$path'
submodule foreach: correct '$path' in nested submodules from a subdirectory
t7400: encapsulate setup code in test_expect_success
When running t7400 in a shell you observe more output than expected:
...
ok 8 - setup - hide init subdirectory
ok 9 - setup - repository to add submodules to
ok 10 - submodule add
[master (root-commit) d79ce16] one
Author: A U Thor <author@example.com>
1 file changed, 1 insertion(+)
create mode 100644 one.t
ok 11 - redirected submodule add does not show progress
ok 12 - redirected submodule add --progress does show progress
ok 13 - submodule add to .gitignored path fails
...
Fix the output by encapsulating the setup code in test_expect_success
Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
"make NO_ICONV=NoThanks" did not override NEEDS_LIBICONV
(i.e. linkage of -lintl, -liconv, etc. that are platform-specific
tweaks), which has been corrected.
* es/make-no-iconv:
Makefile: make NO_ICONV really mean "no iconv"
* ld/git-p4-updates:
git-p4: auto-size the block
git-p4: narrow the scope of exceptions caught when parsing an int
git-p4: raise exceptions from p4CmdList based on error from p4 server
git-p4: better error reporting when p4 fails
git-p4: add option to disable syncing of p4/master with p4
git-p4: disable-rebase: allow setting this via configuration
git-p4: add options --commit and --disable-rebase
RelNotes 2.18: minor fix to entry about dynamically loading completions
It was not "newer versions of bash" but newer versions of
bash-completion that made commit 085e2ee0e6 (completion: load
completion file for external subcommand, 2018-04-29) both necessary
and possible.
Update the corresponding RelNotes entry accordingly.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code path that triggered that "BUG" really does not want to run
without an explicit commit message. In the case where we want to amend a
commit message, we have an *implicit* commit message, though: the one of
the commit to amend. Therefore, this code path should not even be
entered.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
rebase --root: demonstrate a bug while amending root commit messages
When splitting a repository, running `git rebase -i --root` to reword
the initial commit, Git dies with
BUG: sequencer.c:795: root commit without message.
Signed-off-by: Todd Zullinger <tmz@pobox.com> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The return value of ewah_read_mmap() is now an ssize_t,
since we could (in theory) process up to 32GB of data. This
would never happen in practice, but a corrupt or malicious
.bitmap or index file could convince us to do so.
Let's make sure that we don't stuff the value into an int,
which would cause us to incorrectly move our pointer
forward. We'd always move too little, since negative values
are used for reporting errors. So the worst case is just
that we end up reporting a corrupt file, not an
out-of-bounds read.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The on-disk ewah format tells us how big the ewah data is,
and we blindly read that much from the buffer without
considering whether the mmap'd data is long enough, which
can lead to out-of-bound reads.
Let's make sure we have data available before reading it,
both for the ewah header/footer as well as for the bit data
itself. In particular:
- keep our ptr/len pair in sync as we move through the
buffer, and check it before each read
- check the size for integer overflow (this should be
impossible on 64-bit, as the size is given as a 32-bit
count of 8-byte words, but is possible on a 32-bit
system)
- return the number of bytes read as an ssize_t instead of
an int, again to prevent integer overflow
- compute the return value using a pointer difference;
this should yield the same result as the existing code,
but makes it more obvious that we got our computations
right
The included test is far from comprehensive, as it just
picks a static point at which to truncate the generated
bitmap. But in practice this will hit in the middle of an
ewah and make sure we're at least exercising this code.
Reported-by: Luat Nguyen <root@l4w.io> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Support for the --set-upstream option was removed in 52668846ea
(builtin/branch: stop supporting the "--set-upstream" option,
2017-08-17). The change did not completely remove the command
due to an issue noted in the commit's log message.
So, a test was added to ensure that a command which uses the
'--set-upstream' option fails instead of silently acting as an alias
for the '--set-upstream-to' option due to option parsing features.
To avoid confusion, clarify that the option is disabled intentionally
in the corresponding test description.
The test is expected to be around as long as we intentionally fail
on seeing the '--set-upstream' option which in turn we expect to
do for a period of time after which we can be sure that existing
users of '--set-upstream' are aware that the option is no
longer supported.
Signed-off-by: Kaartic Sivaraam <kaartic.sivaraam@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Makefile tweak NO_ICONV is meant to allow Git to be built without
iconv in case iconv is not installed or is otherwise dysfunctional.
However, NO_ICONV's disabling of iconv is incomplete and can incorrectly
allow "-liconv" to slip into the linker flags when NEEDS_LIBICONV is
defined, which breaks the build when iconv is not installed.
On some platforms, iconv lives directly in libc, whereas, on others it
resides in libiconv. For the latter case, NEEDS_LIBICONV instructs the
Makefile to add "-liconv" to the linker flags. config.mak.uname
automatically defines NEEDS_LIBICONV for platforms which require it.
The adding of "-liconv" is done unconditionally, despite NO_ICONV.
Work around this problem by making NO_ICONV take precedence over
NEEDS_LIBICONV.
Reported by: Mahmoud Al-Qudsi <mqudsi@neosmart.net> Signed-off-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some of our tests try to make sure Git behaves sensibly in a
read-only directory, by dropping 'w' permission bit before doing a
test and then restoring it after it is done. The latter is needed
for the test framework to clean after itself without leaving a
leftover directory that cannot be removed.
Ancient parts of tests however arrange the above with
chmod a-w . &&
... do the test ...
status=$?
chmod 775 .
(exit $status)
which obviously would not work if the test somehow dies before it
has the chance to do "chmod 775". Rewrite them by following a more
robust pattern recently written tests use, which is
test_when_finished "chmod 775 ." &&
chmod a-w . &&
... do the test ...
"index-pack --strict" has been taught to make sure that it runs the
final object integrity checks after making the freshly indexed
packfile available to itself.
* jk/index-pack-maint:
index-pack: correct install_packed_git() args
index-pack: handle --strict checks of non-repo packs
prepare_commit_graft: treat non-repository as a noop
fetch-pack: test explicitly that --all can fetch tag references pointing to non-commits
Fetch-pack --all became broken with respect to unusual tags in 5f0fc64513 (fetch-pack: eliminate spurious error messages, 2012-09-09),
and was fixed only recently in e9502c0a7f (fetch-pack: don't try to fetch
peel values with --all, 2018-06-11). However the test added in e9502c0a7f does not explicitly cover all funky cases.
In order to be sure fetching funky tags will never break, let's
explicitly test all relevant cases with 4 tag objects pointing to 1) a
blob, 2) a tree, 3) a commit, and 4) another tag objects. The referenced
tag objects themselves are referenced from under regular refs/tags/*
namespace. Before e9502c0a7f `fetch-pack --all` was failing e.g. this way:
.../git/t/trash directory.t5500-fetch-pack/fetchall$ git fetch-pack --all ..
fatal: A git upload-pack: not our ref 038f48ad...
fatal: The remote end hung up unexpectedly
Helped-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Kirill Smelkov <kirr@nexedi.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The buffer being passed to zlib includes a NUL terminator that git
needs to keep in place. unpack_compressed_entry() attempts to detect
the case that the source buffer hasn't been fully consumed by
checking to see if the destination buffer has been over consumed.
This causes a problem, that more recent zlib patches have been
poisoning the unconsumed portions of the buffer which overwrites
the NUL byte, while correctly returning length and status.
Let's place the NUL at the end of the buffer after inflate returns
to assure that it doesn't result in problems for git even if its
been overwritten by zlib.
Signed-off-by: Jeremy Linton <lintonrjeremy@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
RelNotes 2.18: clarify where directory rename detection applies
Mention that this feature works with some commands (merge and cherry-pick,
implying that it also works with commands that build on these like rebase
-m and rebase -i). Explicitly mentioning two commands hopefully implies
that it may not always work with other commands (am, and rebase without
flags that imply either -m or -i).
Also, since the directory rename detection from this cycle was
specifically added in merge-recursive and not diffcore-rename, remove the
'in "diff" family" phrase from the note. (Folks have requested in the
past that `git diff` detect directory renames and somehow simplify its
output, so it may be helpful to avoid implying that diff has any new
capability here.)
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "autodie" module was added in Perl 5.10.1, but our INSTALL
document says "version 5.8 or later is needed".
As discussed in <87efhfvxzu.fsf@evledraar.gmail.com> this script is in
contrib/, so we might not want to apply that policy, however in this
case "autodie" was recently added as a "gratuitous safeguard" in 786ef50a23 ("git-credential-netrc: accept gpg option",
2018-05-12) (see
<CAHqJXRE8OKSKcck1APHAHccLZhox+tZi8nNu2RA74RErX8s3Pg@mail.gmail.com>).
Looking at it more carefully the addition of "autodie" inadvertently
introduced a logic error, since having it is equivalent to this patch:
@@ -245,10 +244,10 @@ sub load_netrc {
if ($gpgmode) {
my @cmd = ($options{'gpg'}, qw(--decrypt), $file);
log_verbose("Using GPG to open $file: [@cmd]");
- open $io, "-|", @cmd;
+ open $io, "-|", @cmd or die "@cmd: $!";
} else {
log_verbose("Opening $file...");
- open $io, '<', $file;
+ open $io, '<', $file or die "$file: $!$!;
}
# nothing to do if the open failed (we log the error later)
As shown in the context the intent of that code is not do die but to
log the error later.
Per my reading of the file this was the only thing autodie was doing
in this file (there was no other code it altered). So let's remove it,
both to fix the logic error and to get rid of the dependency.
git-p4 originally would fetch changes in one query. On large repos this
could fail because of the limits that Perforce imposes on the number of
items returned and the number of queries in the database.
To fix this, git-p4 learned to query changes in blocks of 512 changes,
However, this can be very slow - if you have a few million changes,
with each chunk taking about a second, it can be an hour or so.
Although it's possible to tune this value manually with the
"--changes-block-size" option, it's far from obvious to ordinary users
that this is what needs doing.
This change alters the block size dynamically by looking for the
specific error messages returned from the Perforce server, and reducing
the block size if the error is seen, either to the limit reported by the
server, or to half the current block size.
That means we can start out with a very large block size, and then let
it automatically drop down to a value that works without error, while
still failing correctly if some other error occurs.
Signed-off-by: Luke Diamand <luke@diamand.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-p4: raise exceptions from p4CmdList based on error from p4 server
This change lays some groundwork for better handling of rowcount errors
from the server, where it fails to send us results because we requested
too many.
It adds an option to p4CmdList() to return errors as a Python exception.
The exceptions are derived from P4Exception (something went wrong),
P4ServerException (the server sent us an error code) and
P4RequestSizeException (we requested too many rows/results from the
server database).
This makes the code that handles the errors a bit easier.
The default behavior is unchanged; the new code is enabled with a flag.
Signed-off-by: Luke Diamand <luke@diamand.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently when p4 fails to run, git-p4 just crashes with an obscure
error message.
For example, if the P4 ticket has expired, you get:
Error: Cannot locate perforce checkout of <path> in client view
This change checks whether git-p4 can talk to the Perforce server when
the first P4 operation is attempted, and tries to print a meaningful
error message if it fails.
Signed-off-by: Luke Diamand <luke@diamand.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-p4: add option to disable syncing of p4/master with p4
Add an option to the git-p4 submit command to disable syncing
with Perforce.
This is useful for the case where a git-p4 mirror has been setup
on a server somewhere, running from (e.g.) cron, and developers
then clone from this. Having the local cloned copy also sync
from Perforce just isn't useful.
Signed-off-by: Luke Diamand <luke@diamand.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-p4: disable-rebase: allow setting this via configuration
This just lets you set the --disable-rebase option with the
git configuration options git-p4.disableRebase. If you're
using this option, you probably want to set it all the time
for a given repo.
Signed-off-by: Luke Diamand <luke@diamand.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
On a daily work with multiple local git branches, the usual way to
submit only a specified commit was to cherry-pick the commit on
master then run git-p4 submit. It can be very annoying to switch
between local branches and master, only to submit one commit. The
proposed new way is to select directly the commit you want to
submit.
Add option --commit to command 'git-p4 submit' in order to submit
only specified commit(s) in p4.
On a daily work developping software with big compilation time, one
may not want to rebase on his local git tree, in order to avoid long
recompilation.
Add option --disable-rebase to command 'git-p4 submit' in order to
disable rebase after submission.
Thanks-to: Cedric Borgese <cedric.borgese@gmail.com> Reviewed-by: Luke Diamand <luke@diamand.org> Signed-off-by: Romain Merland <merlorom@yahoo.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
builtin/send-pack didn't call git_default_config, and because of this
git push --signed didn't respect the username and email in gitconfig in
the HTTP transport.
Signed-off-by: Masaya Suzuki <masayasuzuki@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
completion: correct zsh detection when run from git-completion.zsh
v2.18.0-rc0~90^2 (completion: reduce overhead of clearing cached
--options, 2018-04-18) worked around a bug in bash's "set" builtin on
MacOS by using compgen instead. It was careful to avoid breaking zsh
by guarding this workaround with
if [[ -n ${ZSH_VERSION-}} ]]
Alas, this interacts poorly with git-completion.zsh's bash emulation:
ZSH_VERSION='' . "$script"
Correct it by instead using a new GIT_SOURCING_ZSH_COMPLETION shell
variable to detect whether git-completion.bash is being sourced from
git-completion.zsh. This way, the zsh variant is used both when run
from zsh directly and when run via git-completion.zsh.
Reproduction recipe:
1. cd git/contrib/completion && cp git-completion.zsh _git
2. Put the following in a new ~/.zshrc file:
With this patch:
Triggers nice git-completion.bash based tab completion
Without:
contrib/completion/git-completion.bash:354: read-only variable: QISUFFIX
zsh:12: command not found: ___main
zsh:15: _default: function definition file not found
_dispatch:70: bad math expression: operand expected at `/usr/bin/g...'
Segmentation fault
Reported-by: Rick van Hattem <wolph@wol.ph> Reported-by: Dave Borowitz <dborowitz@google.com> Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>