1. check for an unambiguous 'dst' on the remote; if it
exists, then push to that ref
2. otherwise, check if 'dst' begins with 'refs/'; if it
does, create a new ref
3. otherwise, complain because we don't know where in the
refs hierarchy to put 'dst'
However, in some cases, we can guess about the ref type of
'dst' based on the ref type of 'src'. Specifically, before
complaining we now check:
2.5. if 'src' resolves to a ref starting with refs/heads
or refs/tags, then prepend that to 'dst'
So now this creates a new branch on the remote, whereas it
previously failed with an error message:
git push master:newbranch
Note that, by design, we limit this DWIM behavior only to
source refs which resolve exactly (including symrefs which
resolve to existing refs). We still complain on a partial
destination refspec if the source is a raw sha1, or a ref
expression such as 'master~10'.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
It seems to be a FAQ that people try running git-gc, and
then get puzzled about why the size of their .git directory
didn't change. This note mentions the reasons why things
might unexpectedly get kept.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
This test tried to push into a remote with ambiguous refs in
remotes/$x/master and remotes/$y/master. However, the remote
never actually tells us about the refs/remotes hierarchy, so
we don't even see this ambiguity.
The test happened to pass because we were simply looking for
failure, and the test fails for another reason: the dst
refspec does not exist and does not begin with refs/, making
it invalid.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Coming from CVS, I found the git glossary vital to learning git and learning
how terms in git correlate to the cvs terminology with which I am familiar.
This patch links the glossary from the cvs-migration page so cvs users will
be able to fine the glossary as soon as they start looking at git documents.
Signed-off-by: Matt Graham <mdg149@gmail.com> Acked-by: J. Bruce Fields <bfields@fieldses.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
write-tree: properly detect failure to write tree objects
Tomasz Fortuna reported that "git commit" does not error out properly when
it cannot write tree objects out. "git write-tree" shares the same issue,
as the failure to notice the error is deep in the logic to write tree
objects out recursively.
25ee9731c137d0a24b0f4879eb0b0cce9b77d5b0 made the '--prune' option
deprecated and removed its description from the git-gc man page. This
patch removes all references to this option from the rest of the Git
documentation.
svn-git: Use binmode for reading/writing binary rev maps
Otherwise, there is a possible interaction with UTF-8 locales in
combination with PERL_UNICODE, resulting in "inconsistent size: 40" or
"read:"-type errors.
See also:
perldoc -f binmode
<http://perldoc.perl.org/perl581delta.html#UTF-8-no-longer-default-under-UTF-8-locales>
Signed-off-by: Michael Weber <michaelw@foldr.org> Acked-by: Eric Wong <normalperson@yhbt.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
which works wonderfully and doesn't require a username, password or port
setting.
However, git-imap-send currently requires that the imap.host variable be
set in the config even when it was unused. This patch changes imap-send
to only require that the imap.host setting is set if imap.tunnel is not
set. Otherwise, server.host is set to "tunnel" for reporting purposes.
Acked-by: Andy Parkins <andyparkins@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-clone.txt: Adjust note to --shared for new pruning behavior of git-gc
Since git-gc now always calls prune, even with --auto, unreferenced objects
may be removed by more operations than just git-gc. This is important for
clones created using --shared or --reference.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil> Signed-off-by: Dmitry Potapov <dpotapov@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
When trying to import from svn using an author file, git-svn bails out
if it encounters a blank author. The attached patch changes this
behavior and allow using the author file with blanks authors.
I came across this bug while importing from a cvs2svn repo where the
initial revision (1) has a blank author. This doesn't break the behavior
of bailing out when an unknown author is encountered.
Acked-by: Eric Wong <normalperson@yhbt.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
post-receive-email: fix accidental removal of a trailing space in signature line
post-receive-email adds a signature to the end of emails in
generate_email_footer(). The signature was separated from the main email
body using the standard string "-- ". (see RFC 3676)
a6080a0 (War on whitespace, 2007-06-07) removed the trailing whitespace
from "-- ", leaving it as "--", which is not a correct signature
separator.
This patch restores the missing space, but does it in a way that will
not set off the trailing whitespace alarms.
Signed-off-by: Andy Parkins <andyparkins@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Escape project names before creating pathinfo URLs
If a project name contains special URL characters like +, gitweb's links
break in subtle ways. The solution is to pass the project name through
esc_url() and using the return value.
Signed-off-by: martin f. krafft <madduck@madduck.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The project name, when used in a regular expression, needs to be quoted
properly, so that stuff like '++' in the project name does not cause
Perl to barf.
Related info: http://bugs.debian.org/476076
This is a bug in Perl's CGI.pm, but fixing that exposed a similar bug in
gitweb.perl
Signed-off-by: martin f. krafft <madduck@madduck.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
gitweb: Fix 'history' view for deleted files with history
When asked for history of a file which is not present in given branch
("HEAD", i.e. current branch, or given by transient $hash_hase ('hb')
parameter), but is present deeper in the history (meaning that "git
rev-list --full-history $hash_base -- $file_name" is not empty), and
there is no $hash ('h') parameter set for a file, gitweb would spew
multiple of "Use of uninitialized value" warnings, and some links
would be missing. This commit fixes this bug.
This bug occurs in the rare cases when "git log -- <path>" is empty
and "git log --full-history -- <path>" is not, or to be more exact in
the cases when full-history starts later than given branch. It can
happen if you are using handcrafted gitwb URL, or if you follow
generic 'history' link or bookmark for a file which got deleted.
Gitweb tried to get file type ('tree', or 'blob', or even 'commit')
from the commit we start searching from (where the file was not
present), and not among found commits. This was the cause of "Use of
uninitialized value" warnings.
This commit also add tests for such situation to t9500 test.
While we are it, return HTTP error if there is _no_ history; it means
that file or directory was not found (for given branch). Also error
out if type of item could not be found: it should not happen now, but
better be sure.
Signed-off-by: Jakub Narebski <jnareb@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Document that WebDAV doesn't need git on the server, and works over SSL
I managed to set up a Git repository on a preconfigured WebDAV server,
and using HTTPS, without installing Git on it or changing the server
configuration. This works through a proxy too. This patch reflects
this (it previously stated that Git was _necessary_ on the server,
which isn't true). Also give a few hints to troubleshoting.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-remote: reject adding remotes with invalid names
This can happen if the arguments to git-remote add is switched by the
user, and git would only show an error if fetching was also requested.
Fix it by using the refspec parsing engine to check if the requested
name can be parsed as a remote before add it.
Also cleanup so that the "remote.<name>.url" config name buffer is only
initialized once.
Signed-off-by: Jonas Fonseca <fonseca@diku.dk> Signed-off-by: Junio C Hamano <gitster@pobox.com>
POSIX allows echo without flag to interpret specials such as \n, and we
tried to make things portable by using printf instead where it matters.
Recently added code to "git am" had unprotected "echo", which was caught
by t4014 and Rémi Vanicat.
Traditionally git-rebase was implemented in terms of "format-patch" piped
to "am -3", to strike balance between speed (because it avoids a rather
expensive read-tree/merge-recursive machinery most of the time) and
flexibility (the magic "-3" allows it to fall back to 3-way merge as
necessary). However, this combination has one flaw when dealing with a
nonstandard commit log message format that has more than one lines in the
first paragraph.
This teaches "git am --rebasing" to take advantage of the fact that the
mbox message "git rebase" prepares for it records the original commit
object name, to get the log message from the original commit object
instead.
* maint-1.5.4:
git-bisect: make "start", "good" and "skip" succeed or fail atomically
git-am: cope better with an empty Subject: line
Ignore leading empty lines while summarizing merges
bisect: squelch "fatal: ref HEAD not a symref" misleading message
builtin-apply: Show a more descriptive error on failure when opening a patch
Clarify documentation of git-cvsserver, particularly in relation to git-shell
git-bisect: make "start", "good" and "skip" succeed or fail atomically
Before this patch, when "git bisect start", "git bisect good" or
"git bisect skip" were called with many revisions, they could fail
after having already marked some revisions as "good", "bad" or
"skip".
This could be especilally bad for "git bisect start" because as
the file ".git/BISECT_NAMES" would not have been written, there
would have been no attempt to clear the marked revisions on a
"git bisect reset". That's because if there is no
".git/BISECT_NAMES" file, nothing is done to clean things up, as
the bisect session is not supposed to have started.
While at it, let's also create the ".git/BISECT_START" file, only
after ".git/BISECT_NAMES" as been created.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the Subject: line is empty for whatever reason, git-am was fooled by
it and left an empty line at the beginning of the resulting commit log
message.
This moves the logic around so that we do not keep $SUBJECT in a separate
variable. Instead, $dotest/msg-clean, which used to be the log message
body extracted from the message and then trailing whitespaces cleansed
out, now contains the subject line followed by a blank line at the
beginning for normal messages, and we use the first line from the file as
the summary line throughout the program.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
bisect: squelch "fatal: ref HEAD not a symref" misleading message
To get the current HEAD when we start bisecting using for example
"git bisect start", we first try "git symbolic-ref HEAD" to get a
nice name, and if it fails, we fall back to "git rev-parse
--verify HEAD".
The problem is that when "git symbolic-ref HEAD" fails, it
displays "fatal: ref HEAD not a symref", so it looks like "git
bisect start" failed and does not accept detached HEAD, even if
in fact it worked fine.
This patch adds "-q" option to the "git symbolic-ref" call to
get rid of the misleading error message.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
builtin-apply: Show a more descriptive error on failure when opening a patch
When a patch can't be opened (it doesn't exist, there are permission
problems, etc.) we get the usage text, which is not a proper indication of
failure.
Signed-off-by: Alberto Bertogli <albertito@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Clarify documentation of git-cvsserver, particularly in relation to git-shell
For SSH clients restricted to git-shell, CVS_SERVER does not have to be
specified, because git-shell understands the default value of 'cvs' to
mean git-cvsserver'. This makes it totally transparent to CVS users, but
the instruction to set up CVS access for people with real shell access
does not apply.
Previous wording mentioning GIT_AUTHOR, GIT_COMMITTER variables was
unclear that we really meant GIT_AUTHOR_(NAME|EMAIL), etc.
Note that the .ssh/environment file is a good place to set these, and that
the .bashrc is shell-specific. Add a bit of text to differentiate cvs -d
(setting CVSROOT) from cvs co -d (setting the name of the newly checked
out directory). Removed an extra 'Example:' string.
Signed-off-by: Scott Collins <scc@ScottCollins.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git clean: Don't automatically remove directories when run within subdirectory
When git clean is run from a subdirectory it should follow the normal
policy and only remove directories if they are passed in as a pathspec,
or -d is specified.
The fix is to send len which could be shorter than ent->len because we
have stripped the trailing '/' that read_directory adds. Additionaly
match_one() was modified to allow a name[] that is not NUL terminated.
This allows us to check if the name matched the pathspec exactly
instead of recursively.
Signed-off-by: Shawn Bohrer <shawn.bohrer@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-submodule - possibly use branch name to describe a module
This changes the search logic for describing a submodule from:
- annotated tag
- any tag
- tag on a subsequent commit
- commit id
to
- annotated tag
- any tag
- tag on a subsequent commit
- local or remote branch
- commit id
The change is describing with respect to a branch before falling
back to the commit id. By itself, git-submodule will maintain submodules
as headless checkouts without ever making a local branch. In
general, such heads can always be described relative to the remote branch
regardless of existence of tags, and so provides a better fallback
summary than just the commit id.
This requires inserting an extra describe step as --contains is
incompatible with --all, but the latter can be used with --always
to fall back to a commit ID. Also, --contains implies --tags, so the
latter is not needed.
Signed-off-by: Mark Levedahl <mlevedahl@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous one overwrote the variable used to report the bad input
when the input is actually bad, and we did not give a useful enough
information. This corrects it.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint-1.5.4:
bisect: fix bad rev checking in "git bisect good"
revision.c: make --date-order overriddable
Fix section about backdating tags in the git-tag docs
Document option --only of git commit
Documentation/git-request-pull: Fixed a typo ("send" -> "end")
It seems that "git bisect good" and "git bisect skip" have never
properly checked arguments that have been passed to them. As soon
as one of them can be parsed as a SHA1, no error or warning would
be given.
This is because 'git rev-parse --revs-only --no-flags "$@"' always
"exit 0" and outputs all the SHA1 it can found from parsing "$@".
This patch fix this by using, for each "bisect good" argument, the
same logic as for the "bisect bad" argument.
While at it, this patch teaches "bisect bad" to give a meaningfull
error message when it is passed more than one argument.
Note that if "git bisect good" or "git bisect skip" is given some
proper revs and then something that is not a proper rev, then the
first proper revs will still have been marked as "good" or "skip".
Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jan Engelhardt noticed that while --topo-order can be overridden by a
subsequent --date-order, the reverse was not possible. That's because
setup_revisions() failed to set revs->lifo properly.
Signed-off-by: Michele Ballabio <barra_cuda@katamail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "git submodule status" command tries to show the name of the
submodule HEAD revision more descriptively, but the submodule
repository lacked a suitable tag to do so, it leaked "fatal: cannot
describe" message to the UI. Squelch it by using '--always'.
Signed-off-by: Ping Yin <pkufranky@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Its documentation was removed by 6c96753 (Documentation/git-commit: rewrite
to make it more end-user friendly, 2006-12-08), even though it is referenced
from a few places, including builtin-commit.c (as part of the commentary in
the commit message template).
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-fetch: fix status output when not storing tracking ref
There was code in update_local_ref for handling this case,
but it never actually got called. It assumed that storing in
FETCH_HEAD meant a blank peer_ref name, but we actually have
a NULL peer_ref in this case, so we never even made it to
the update_local_ref function.
On top of that, the display formatting was different from
all of the other cases, probably owing to the fact that
nobody had ever actually seen the output.
This patch harmonizes the output with the other cases and
moves the detection of this case into store_updated_refs,
where we can actually trigger it.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint-1.5.4:
core-tutorial.txt: Fix showing the current behaviour.
git-archive: ignore prefix when checking file attribute
Fix documentation syntax of optional arguments in short options.
core-tutorial.txt: Fix showing the current behaviour.
The --root option from "git diff-tree" won't do nothing
when is given to commands like git-whatchanged or git-log,
because those always print the initial commit by default.
This fixes the tutorial explaining the function of the
log.showroot configuration variable.
Signed-off-by: Carlos Rica <jasampler@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-archive: ignore prefix when checking file attribute
Ulrik Sverdrup noticed that git-archive doesn't correctly apply the attribute
export-subst when the option --prefix is given, too.
When it checked if a file has the attribute turned on, git-archive would try
to look up the full path -- including the prefix -- in .gitattributes. That's
wrong, as the prefix doesn't need to have any relation to any existing
directories, tracked or not.
This patch makes git-archive ignore the prefix when looking up if value of the
attribute export-subst for a file.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix documentation syntax of optional arguments in short options.
When an argument for an option is optional, like in -n from git-tag,
puting a space between the option and the argument is interpreted
as a missing argument for the option plus an isolated argument.
Documentation now reflects the need to write the parameter following
the option -n, as in "git tag -nARG", for instance.
Signed-off-by: Carlos Rica <jasampler@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-svn: fix following renamed paths when tracking a single path
When using git-svn to follow only a single (empty) path per
svn-remote (i.e. not using --stdlayout), following the history
of a renamed path was broken in c586879cdfa4f8181a14e953a9152a4639eef333.
This reverts the regression for the single (emtpy) path per
svn-remote case.
To avoid breaking the tests in a committed revision, this is an
addendum to a patch originally submitted by
Santhosh Kumar Mani <santhoshmani@gmail.com>:
> git-svn: add test for renamed directory fetch
>
> This test tries to fetch a directory which had renames in the
> history from a SVN repository.
[ew: unneccesary dependency on the starting an HTTP server
removed from Santhosh's original test.]
Signed-off-by: Eric Wong <normalperson@yhbt.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
test suite: remove useless TERM cruft in "t7005-editor.sh"
In commit 15387e3 (Test suite: reset TERM to its previous value after
testing., 2007-10-26), I added a workaround to reset TERM to its previous
value before the "test_done" at the end of "t7005-editor.sh" because
otherwise "test_done" would have printed the test result with a bad TERM
env variable (this resulted in output with no color on konsole).
But since commit c2116a1 (test-lib: fix TERM to dumb for test
repeatability, 2008-03-06), colored output is printed in a subshell with
TERM reset to its original value so the earlier workaround is not needed
anymore.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix "git apply" to correctly enforce "match at the beginning"
An earlier commit 4be6096 (apply --unidiff-zero: loosen sanity checks for
--unidiff=0 patches, 2006-09-17) made match_beginning and match_end
computed incorrectly. If a hunk inserts at the beginning, old position
recorded at the hunk is line 0, and if a hunk changes at the beginning, it
is line 1. The new test added to t4104 exposes that the old code did not
insist on matching at the beginning for a patch to add a line to an empty
file.
An even older 65aadb9 (apply: force matching at the beginning.,
2006-05-24) was equally wrong in that it tried to take hints from the
number of leading context lines, to decide if the hunk must match at the
beginning, but we can just look at the line number in the hunk to decide.
Add description of OFS_DELTA to the pack format description
Signed-off-by: Peter Eriksen <s022018@student.dtu.dk> Acked-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
gitk: Fix changing colors through Edit->Preferences
With tcl/tk8.5 the lset command seems to behave differently. When
changing the background color through Edit->Preferences, the changes
are applied, but new dialogs, such as View->New view... barf with
Error: unknown color name "{#ffffff}"
Additionally when closing gitk, and starting it up again, a bad value
has been saved to ~/.gitk, preventing gitk from running properly; it
fails with
Error in startup script: unknown color name "{#ffffff}"
...
This commit fixes the problem by changing the color dialogs to pass
the empty string {} as the list index to choosecolor. This causes
the lset and lindex commands used by choosecolor to use and set the
whole variable (bgcolor, fgcolor or selectbgcolor) rather than
treating them as a 1-element list. Tested with tcl/tk8.4 and 8.5.
Dmitry Potapov reported this problem through
http://bugs.debian.org/472615
Signed-off-by: Gerrit Pape <pape@smarden.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
git-fetch: Don't trigger a bus error when given the refspec "tag"
When git-fetch encounters the refspec "tag" it assumes that the next
argument will be a tag name. If there is no next argument, it should
die gracefully instead of erroring.
Signed-off-by: Kevin Ballard <kevin@sb.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* git://repo.or.cz/git-gui:
git-gui: use +/- instead of ]/[ to show more/less context in diff
git-gui: Update french translation
git-gui: Switch keybindings for [ and ] to bracketleft and bracketright
git-gui: use +/- instead of ]/[ to show more/less context in diff
On some systems, brackets cannot be used as event details
(they don't have a keysym), so use +/- instead (both on
keyboard and keypad) and add ctrl-= as a synonym of ctrl-+
for convenience.
[sp: Had to change accelerator to show only "$M1T-="; the
original version included "$M1T-+ $M1T-=" but this is
not drawn at all on Mac OS X.]
Signed-off-by: Michele Ballabio <barra_cuda@katamail.com> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Describe the bug in handling filenames with funny characters in 'git add -i'
The interactive mode does not work with files whose names contain
characters that need C-quoting. `core.quotepath` configuration can be
used to work this limitation around to some degree, but backslash,
double-quote and control characters will still have problems.
* dd/cvsserver:
cvsserver: Use the user part of the email in log and annotate results
cvsserver: Add test for update -p
cvsserver: Implement update -p (print to stdout)
cvsserver: Add a few tests for 'status' command
cvsserver: Do not include status output for subdirectories if -l is passed
cvsserver: Only print the file part of the filename in status header
cvsserver: Respond to the 'editors' and 'watchers' commands
t7004-tag: Skip more tests if gpg is not available.
This test was already careful enough to skip signed tag tests if gpg
is not available, but it must also skip all verify tests, even those
that are about non-signed tags, because they also invoke gpg.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at> Signed-off-by: Junio C Hamano <gitster@pobox.com>
af05d67 (Always set *nongit_ok in setup_git_directory_gently(),
2008-03-25) had a change from the patch originally submitted that resulted
in disabling aliases outside a git repository.
It turns out that some people used "alias.fubar = diff --color-words" in
$HOME/.gitconfig to use non-index diff (or any command that do not need
git repository) outside git repositories, and this change broke them,
so this resurrects the support for such usage.
mktag.c: tweak validation of tagger field and adjust test script
Update the verify_tag() function to remove an unnecessary test, and add
additional check for angle brackets in the name and email field, and
spaces in the email field. The timestamp and timezone sections are made
more straight forward by using strspn().
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil> Signed-off-by: Junio C Hamano <gitster@pobox.com>
filter-branch: Fix renaming a directory in the tree-filter
Commit d89c1df (filter-branch: don't use xargs -0, 2008-03-12) replaced a
'ls-files | xargs rm' pipeline by 'git clean'. 'git clean' however does
not recurse and remove directories by default.
Now, consider a tree-filter that renames a directory.
1. For the first commit everything works as expected
2. Then filter-branch checks out the files for the next commit. This
leaves the new directory behind because there is no real "branch
switching" involved that would notice that the directory can be
removed.
3. Then filter-branch invokes 'git clean' to remove exactly those
left-overs. But here it does not remove the directory.
4. The next tree-filter does not work as expected because there already
exists a directory with the new name.
Just add -d to 'git clean', so that empty directories are removed.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at> Signed-off-by: Junio C Hamano <gitster@pobox.com>
filter-branch: Test renaming directories in a tree-filter
This test currently fails.
If b is a directory then 'mv a b' is not a plain "rename", but really a
"move", so we must also test that the directory does not exist with the
old name in the directory with the new name.
There's also some cleanup in the corresponding "rename file" test to avoid
spurious shell syntax errors and "ambigous ref" error from 'git show' (but
these should show up only if the test would fail anyway). Plus we also
test for the non-existence of the old file.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
mktag.c: improve verification of tagger field and tests
Since nearly its birth, git's tags have included a "tagger" field which
describes the name of tagger, email of tagger, and date and time of tagging.
But, this field was only loosely tested by git-mktag. Provide some thorough
testing for this field and also ensure that the tag header is separated
from the tag body by an empty line to reduce the convenience of creating
a flawed tag.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil> Signed-off-by: Junio C Hamano <gitster@pobox.com>