Documentation: clarify use of .git{ignore,attributes} versus .git/info/*
gitignore patterns can be read from three different
files, while gitattributes can come from two files. Let's
provide some hints to the user about the differences and how
they are typically used.
Suggested by Toby Corkindale, but gratuitously reworded by Jeff King.
Signed-off-by: Toby Corkindale <toby.corkindale@rea-group.com> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-fetch test: test tracking fetch results, not just FETCH_HEAD
We really should have done this long time ago. Existing t5515 test
was written for the specific purpose of catching regression to the
contents of generated FETCH_HEAD file, but it also is a good place
to make sure various fetch configurations do fetch what they intend
to fetch (and nothing else).
Fetched remote branch from .git/branches/foo should fetch into
refs/heads/foo. Also when partial URL is given, the fetched head should
always be remote HEAD, and the result should not be stored anywhere.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
This changes the pattern matching code to not store the required final
/ before the *, and then to require each side to be a valid ref (or
empty). In particular, any refspec that looks like it should be a
pattern but doesn't quite meet the requirements will be found to be
invalid as a fallback non-pattern.
This was cherry picked from commit ef00d15 (Tighten refspec processing,
2008-03-17), and two fix-up commits 46220ca (remote.c: Fix overtight
refspec validation, 2008-03-20) and 7d19da4 (refspec: allow colon-less
wildcard "refs/category/*", 2008-03-25) squashed in.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix the wrong output of `git-show v1.3.0~155^2~4` in documentation.
Texts between ~ and ~ will be subscripted during the asciidoc translation.
Signed-off-by: Guanqun Lu <Guanqun.Lu@Gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
(cherry picked from commit 0c829391cfcdc57172765322575804a7ad5f3116)
When rebasing changes that contain issues that the pre-commit hook flags
as problematic, the rebase cannot be continued. However, rebase is about
transplanting commits that are already made with as little distortion as
possible, and pre-commit check should not interfere.
Earlier, c5b09fe (Avoid update hook during git-rebase --interactive,
2007-12-19) fixed "rebase -i", but "rebase -m" shared the same issue.
format-patch: generate MIME header as needed even when there is format.header
Earlier, the callchain from pretty_print_commit() down to pp_title_line()
had an unwarranted assumption that the presense of "after_subject"
parameter, means the caller has already output MIME headers for
attachments. The parameter's primary purpose is to give extra header
lines the caller wants to place after pp_title_line() generates the
"Subject: " line.
This assumption does not hold when the user used the format.header
configuration variable to pass extra headers, and caused a message with
non-ASCII character to lack proper MIME headers (e.g. 8-bit CTE header).
The earlier logic also failed to suppress duplicated MIME headers when
"format-patch -s --attach" is asked for and the signer's name demanded
8-bit clean transport.
This patch fixes the logic by introducing a separate need_8bit_cte
parameter passed down the callchain. This can have one of these values:
-1 : we've already done MIME crap and we do not want to add extra header
to say this is 8bit in pp_title_line();
0 : we haven't done MIME and we have not seen anything that is 8bit yet;
1 : we haven't done MIME and we have seen something that is 8bit;
pp_title_line() must add MIME header.
It adds two tests by Jeff King who independently diagnosed this issue.
git-new-workdir: Share SVN meta data between work dirs and the repository
Multiple work dirs with git svn caused each work dir to have its own
stale copy of the SVN meta data in .git/svn
git svn rebase updates commits with git-svn-id: in the repository and
stores the SVN meta data information only in that work dir. Attempting to
git svn rebase in other work dirs for the same branch would fail because
the last revision fetched according to the git-svn-id is greater than the
revision in the SVN meta data for that work directory.
Signed-off-by: Bernt Hansen <bernt@norang.ca> Acked-by: Eric Wong <normalperson@yhbt.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
I think it would make more sense for rev~ to have the same guarantees that
rev^ has, namely to always return a commit. I would also suggest that not
giving a number would have the same effect of defaulting to 1, not 0.
Right now it's a bit illogical, but at least it's an _undocumented_
illogical behaviour.
This patch makes '^' and '~' act the same for the default count (i.e. both
default to 1), and also have the same behaviour for a count of zero.
Thanks to martin f krafft for the bug report:
> My git-svn target configuration is
>
> [svn-remote "svn"]
> url = svn://svn.berlios.de/docutils
> fetch = trunk/docutils:refs/remotes/trunk
> branches = branches/*/docutils:refs/remotes/*
> tags = tags/*/docutils:refs/remotes/tags/*
>
> Unfortunately, when I run
>
> git-svn init -T trunk/docutils -t 'tags/*/docutils'
> -b 'branches/*/docutils'
>
> then I get (note the two asterisks on the left hand side):
>
> branches = branches/*/docutils/*:refs/remotes/*
> tags = tags/*/docutils/*:refs/remotes/tags/*
>
> I took a brief stab at the code but I can't even figure out where
> the /* is appended, so I defer to you.
>
> It should be trivial to keep git-svn from appending /* if the left
> side already contains an asterisk.
Signed-off-by: Eric Wong <normalperson@yhbt.net> Tested-by: martin f krafft <madduck@madduck.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Earlier, it would error out while trying to read and/or writing them.
Now, calling merge-file with empty files is neither interesting nor
useful, but it is a bug that needed fixing.
Noticed by Clemens Buchacher.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
File mode changes should be handled similarly to changes of content.
That is, if the file mode changed in only one branch, keep the changed
version, and if both branch changed to different mode, mark it as a
conflict.
Signed-off-by: Clemens Buchacher <drizzd@aon.at> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Prior to commit 8320199 (Rewrite builtin-fetch option parsing to use
parse_options().), we understood '-n' as a short option to mean "don't
fetch tags from the remote". This patch reinstates behaviour similar,
but not identical to the pre commit 8320199 times.
Back then, -n always overrode --tags, so if both --tags and -n was
given on command-line, no tags were fetched regardless of argument
ordering. Now we use a "last entry wins" strategy, so '-n --tags'
means "fetch tags".
Since it's patently absurd to say both --tags and --no-tags, this
shouldn't matter in practice.
Spotted-by: Artem Zolochevskiy <azol@altlinux.org> Reported-by: Dmitry V. Levin <ldv@altlinux.org> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Tested-by: Andreas Ericsson <ae@op5.se> Signed-off-by: Junio C Hamano <gitster@pobox.com>
gitweb: Fix bug in href(..., -replay=>1) when using 'pathinfo' form
URLs generated by href(..., -replay=>1) (which includes 'next page'
links and alternate view links) didn't set project info correctly
when current page URL is in pathinfo form.
This was caused by the fact that href() always replays params in the
arrayref form, were they multivalued or singlevalued, and the code
dealing with 'pathinfo' feature couldn't deal with $params{'project'}
being arrayref.
Setting $params{'project'} is moved before replaying params; this
ensures that 'project' parameter is processed correctly.
Noticed-by: Peter Oberndorfer <kumbayo84@arcor.de> Noticed-by: Wincent Colaiuta <win@wincent.com> Signed-off-by: Jakub Narebski <jnareb@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-svn: fix find-rev error message when missing arg
Just let the user know that a revision argument is missing instead of
a perl error. This error message mimic the "init" error message, but
could be improved.
Signed-off-by: Marc-Andre Lureau <marcandre.lureau@gmail.com> Acked-by: Eric Wong <normalperson@yhbt.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
does not pick up quotes in <editor>, so you cannot give path to the
editor that has a shell IFS whitespace in it, and also give it initial
set of parameters and flags. Replace $0 with <editor> to fix this issue.
git rebase --abort: always restore the right commit
Previously, --abort would end by git resetting to ORIG_HEAD, but some
commands, such as git reset --hard (which happened in git rebase --skip,
but could just as well be typed by the user), would have already modified
ORIG_HEAD.
Just use the orig-head we store in $dotest instead.
[jc: cherry-picked from 48411d and 4947cf9 on 'master']
Signed-off-by: Mike Hommey <mh@glandium.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
ident.c: reword error message when the user name cannot be determined
The "config --global" suggested in the message is a valid one-shot fix,
and hopefully one-shot across machines that NFS mounts the home directories.
This knowledge can hopefully be reused when you are forced to use git on
Windows, but the fix based on GECOS would not be applicable, so
it is not such a useful hint to mention the exact reason why the
name cannot be determined.
Signed-off-by: Santi Béjar <sbejar@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the rewriteRoot setting is used with git-svn, it causes the svn
IDs added to commit messages to bear a different URL than is actually
used to retrieve Subversion data.
It is common for Subversion repositories to be available multiple
ways: for instance, HTTP to the public, and svn+ssh to people with
commit access. The need to switch URLs for access is fairly common as
well -- perhaps someone was just given commit access. To switch URLs
without having to rewrite history, one can use the old url as a
rewriteRoot, and use the new one in the svn-remote url setting.
This works well for svn fetching and general git commands.
However, git-svn dcommit, rebase, and perhaps other commands do not
work in this scenario. They scan the svn ID lines in commit messages
and attempt to match them up with url lines in [svn-remote] sections
in the git config.
This patch allows them to match rewriteRoot options, if such options
are present.
Signed-off-by: John Goerzen <jgoerzen@complete.org> Acked-by: Eric Wong <normalperson@yhbt.net>
filter-branch: handle "disappearing tree" case correctly in subdir filter
The subdirectory filter had a bug to notice that the commit in question
did not have anything in the path-limited part of the tree. $commit:$path
does not name an empty tree when $path does not appear in $commit.
This should fix it. The additional test in t7003 is originally from Kevin
Ballard but with fixups.
config.txt: refer to --upload-pack and --receive-pack instead of --exec
The options --upload-pack (of git-fetch-pack) and --receive-pack (of
git-push) do the same as --exec (for both commands). But the former options
have the more descriptive name.
Signed-off-by: Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
shortlog: take the first populated line of the description
Way back the perl version of shortlog would take the first populated line
of the commit body. The builtin version mearly takes the first line.
This leads to empty shortlog entries when there is some viable text in
the commit.
Reinstate this behaviour igoring all lines with nothing but whitespace.
This is often useful when dealing with commits imported from foreign SCMs
that do not tidy up the log message of useless blank lines at the beginning.
Signed-off-by: Andy Whitcroft <apw@shadowen.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-gui: Gracefully fall back to po2msg.sh if msgfmt --tcl fails
Mac OS X Tiger may have a msgfmt available but it doesn't understand
how to implement --tcl. Falling back to po2msg.sh on such systems
is a reasonable behavior.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Fix 'git remote show' regression on empty repository in 1.5.4
Back in 18f7c51c we switched git-ls-remote/git-peek-remote to
use the transport backend, rather than do everything itself.
As part of that switch we started to produce a non-zero exit
status if no refs were received from the remote peer, which
happens when the remote peer has no commits pushed to it yet.
(E.g. "git --git-dir=foo.git init; git ls-remote foo.git")
Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
A merge is not necessarily with a remote branch, it can be with any
commit.
Thanks to Paolo Ciarrocchi for pointing out the problem, and to
Nicolas Pitre for pointing out the fact that a merge is not
necessarily with a branch head.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-merge.sh: better handling of combined --squash,--no-ff,--no-commit options
git-merge used to use either the --squash,--no-squash, --no-ff,--ff,
--no-commit,--commit option, whichever came last in the command line.
This lead to some un-intuitive behavior, having
git merge --no-commit --no-ff <branch>
actually commit the merge. Now git-merge respects --no-commit together
with --no-ff, as well as other combinations of the options. However,
this broke a selftest in t/t7600-merge.sh which expected to have --no-ff
completely override the --squash option, so that
git merge --squash --no-ff <branch>
fast-forwards, and makes a merge commit; combining --squash with --no-ff
doesn't really make sense though, and is now refused by git-merge. The
test is adapted to test --no-ff without the preceding --squash, and
another test is added to make sure the --squash --no-ff combination is
refused.
The unexpected behavior was reported by John Goerzen through
http://bing.sdebian.org/468568
Signed-off-by: Gerrit Pape <pape@smarden.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
For some reason, http_cleanup was running all active slots, which could
lead in situations where a freed slot would be accessed in
fill_active_slots. OTOH, we are cleaning up, which means the caller
doesn't care about pending requests. Just forget about them instead
or running them.
Signed-off-by: Mike Hommey <mh@glandium.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous code mistakenly used wt_status_prepare to check whether the
index had anything commitable in it; however, that function is just an
init function, and will never report a dirty index.
The correct way with wt_status_* would be to call wt_status_print with the
output pointing to /dev/null or similar. However, that does extra work by
both examining the working tree and spewing status information to nowhere.
Instead, let's just implement the useful subset of wt_status_print as an
"is_index_dirty" function.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we expect a git command to notice and signal errors, we
carelessly wrote in our tests:
test_expect_success 'reject bogus request' '
do something &&
do something else &&
! git command
'
but a non-zero exit could come from the "git command" segfaulting.
A new helper function "tset_must_fail" is introduced and it is
meant to be used to make sure the command gracefully fails (iow,
dying and exiting with non zero status is counted as a failure
to "gracefully fail"). The above example should be written as:
test_expect_success 'reject bogus request' '
do something &&
do something else &&
test_must_fail git command
'
receive-pack: Initialize PATH to include exec-dir.
511707d (use only the $PATH for exec'ing git commands) made it a
requirement to call setup_path() to include the git exec-dir in PATH
before spawning any other git commands. git-receive-pack was not yet
adapted to do this and therefore fails to spawn git-unpack-objects if that
is not in the standard PATH.
Signed-off-by: Björn Steinbrink <B.Steinbrink@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git.el: find the git-status buffer whatever its name is
git-status used the buffer name to find git-status buffers, and that
can fail if the buffer has another name, for example when multiple
working directories is tracked.
Signed-off-by: Rémi Vanicat <vanicat@debian.org> Acked-by: Alexandre Julliard <julliard@winehq.org> Tested-by: Xavier Maillard <xma@gnu.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
templates/Makefile: don't depend on local umask setting
Don't take the local umask setting into account when installing the
templates/* files and directories, running 'make install' with umask set
to 077 resulted in template/* installed with permissions 700 and 600.
The problem was discovered by Florian Zumbiehl, reported through
http://bugs.debian.org/467518
Signed-off-by: Gerrit Pape <pape@smarden.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-gui: Paper bag fix info dialog when no files are staged at commit
If the user tries to commit their changes without actually staging
anything we used to display an informational dialog suggesting they
first stage those changes, then retry the commit feature.
Unfortunately I broke this in aba15f7 ("Ensure error dialogs always
appear over all other windows") and failed to fix it in the paper
bag fix that came one day after it.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
In transport.c, proxy setting (the one from the remote conf) was set through
curl_easy_setopt() call, while http.c already does the same with the
http.proxy setting. We now just use this infrastructure instead, and make
http_init() now take the struct remote as argument so that it can take the
http_proxy setting from there, and any other property that would be added
later.
At the same time, we make get_http_walker() take a struct remote argument
too, and pass it to http_init(), which makes remote defined proxy be used
for more than get_refs_via_curl().
We leave out http-fetch and http-push, which don't use remotes for the
moment, purposefully.
Signed-off-by: Mike Hommey <mh@glandium.org> Acked-by: Daniel Barkalow <barkalow@iabervon.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
There were a number of die() calls before the syslog was opened; hence,
these error messages would have been sent to /dev/null in detached mode.
Now we install the daemon-specific die routine before any error message is
generated so that these messages go to the syslog.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Eliminate confusing "won't bisect on seeked tree" failure
This error message is very confusing---it doesn't tell the user
anything about how to fix the situation. And the actual fix
for the situation ("git bisect reset") does a checkout of a
potentially random branch, (compared to what the user wants to
be on for the bisect she is starting).
The simplest way to eliminate the confusion is to just make
"git bisect start" do the cleanup itself. There's no significant
loss of safety here since we already have a general safety in
the form of the reflog.
Note: We preserve the warning for any cogito users. We do this
by switching from .git/head-name to .git/BISECT_START for the
extra state, (which is a more descriptive name anyway).
Signed-off-by: Carl Worth <cworth@cworth.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
builtin-reflog.c: don't install new reflog on write failure
When expiring reflog entries, a new temporary log is written which contains
only the entries to retain. After it is written, it is renamed to replace
the existing reflog. Currently, we check that writing of the new log is
successful and print a message on failure, but the original reflog is still
replaced with the new reflog even on failure. This patch causes the
original reflog to be retained if we fail when writing the new reflog.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil> Signed-off-by: Junio C Hamano <gitster@pobox.com>
1ca3d6e (send-email: squelch warning due to comparing undefined $_ to "")
where if the user was prompted for an initial In-Reply-To and didn't
provide one, messages would be sent out with an invalid In-Reply-To of
"<>"
Also add test cases for the regression and the fix. A small modification
was needed to allow send-email to take its replies from stdin if the
environment variable GIT_SEND_EMAIL_NOTTY is set.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix 'git cvsexportcommit -w $cvsdir ...' when used with relative $GIT_DIR
When using the '-w $cvsdir' option to cvsexportcommit, it will chdir into
$cvsdir before executing several other git commands. If $GIT_DIR is set to
a relative path (e.g. '.'), the git commands executed by cvsexportcommit
will naturally fail.
Therefore, ensure that $GIT_DIR is absolute before the chdir to $cvsdir.
Signed-off-by: Johan Herland <johan@herland.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
For some reason, t5505-remote was setting GIT_CONFIG to .git/config
and exporting it. This should have been no-op, as test framework did
the same for a long time anyway.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
filter-branch documentation: non-zero exit status in command abort the filter
Since commit 8c1ce0f46b85d40f215084eed7313896300082df filter-branch fails
when a <command> has a non-zero exit status. This commit makes it clear
in the documentation and also fixes the parent-filter example, that was
incorrectly returning non-zero when the commit being tested wasn't the
one to be rewritten.
Signed-off-by: Caio Marcelo de Oliveira Filho <cmarcelo@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
rev-parse: fix potential bus error with --parseopt option spec handling
A non-empty line containing no spaces should be treated by --parseopt as
an option group header, but was causing a bus error. Also added a test
script for rev-parse --parseopt.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Protect peel_ref fallback case from NULL parse_object result
If the SHA-1 we are requesting the object for does not exist in
the object database we get a NULL back. Accessing the type from
that is not likely to succeed on any system.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ensure 'make dist' compiles git-archive.exe on Cygwin
On Cygwin we have to use git-archive.exe as the target, otherwise
running 'make dist' does not compile git-archive in the current
directory. That may cause 'make dist' to fail on a clean source
tree that has never been built before.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge branch 'maint' of git://repo.or.cz/git-gui into maint
* 'maint' of git://repo.or.cz/git-gui:
git-gui: Focus insertion point at end of strings in repository chooser
git-gui: Avoid hardcoded Windows paths in Cygwin package files
git-gui: Default TCL_PATH to same location as TCLTK_PATH
git-gui: Paper bag fix error dialogs opening over the main window
git-gui: Ensure error dialogs always appear over all other windows
git-gui: relax "dirty" version detection
git-gui: support Git Gui.app under OS X 10.5
We were returning the _address of_ the stored item (or NULL)
instead of the item itself. While this sort of indirection
is useful for insertion (since you can lookup and then
modify), it is unnecessary for read-only lookup. Since the
hash code splits these functions between the internal
lookup_hash_entry function and the public lookup_hash
function, it makes sense for the latter to provide what
users of the library expect.
The result of this was that the index caching returned bogus
results on lookup. We unfortunately didn't catch this
because we were returning a "struct cache_entry **" as a
"void *", and accidentally assigning it to a "struct
cache_entry *".
As it happens, this actually _worked_ most of the time,
because the entries were defined as:
meaning that interpreting a "struct cache_entry **" as a
"struct cache_entry *" would yield an entry where all fields
were totally bogus _except_ for the next pointer, which
pointed to the actual cache entry. When walking the list, we
would look at the bogus "name" field, which was unlikely to
match our lookup, and then proceed to the "real" entry.
The reading of bogus data was silently ignored most of the
time, but could cause a segfault for some data (which seems
to be more common on OS X).
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-gui: Focus insertion point at end of strings in repository chooser
When selecting a local working directory for a new repository or a
location to clone an existing repository into we now set the insert
point at the end of the selected path, allowing the user to type in
any additional parts of the path if they so desire.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
git-gui: Avoid hardcoded Windows paths in Cygwin package files
When we are being built by the Cygwin package maintainers we need to
embed the POSIX path to our library files and not the Windows path.
Embedding the Windows path means all end-users who install our Cygwin
package would be required to install Cygwin at the same Windows path
as the package maintainer had Cygwin installed to. This requirement
is simply not user-friendly and may be infeasible for a large number
of our users.
We now try to auto-detect if the Tcl/Tk binary we will use at runtime
is capable of translating POSIX paths into Windows paths the same way
that cygpath does the translations. If the Tcl/Tk binary gives us the
same results then it understands the Cygwin path translation process
and should be able to read our library files from a POSIX path name.
If it does not give us the same answer as cygpath then the Tcl/Tk
binary might actually be a native Win32 build (one that is not
linked against Cygwin) and thus requires the native Windows path
to our library files. We can assume this is not a Cygwin package
as the Cygwin maintainers do not currently ship a pure Win32 build
of Tcl/Tk.
Reported on the git mailing list by Jurko Gospodnetić.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
git-gui: Default TCL_PATH to same location as TCLTK_PATH
Most users set TCLTK_PATH to tell git-gui where to find wish, but they
fail to set TCL_PATH to the same Tcl installation. We use the non-GUI
tclsh during builds so headless systems are still able to create an
index file and create message files without GNU msgfmt. So it matters
to us that we find a working TCL_PATH at build time.
If TCL_PATH hasn't been set yet we can take a better guess about what
tclsh executable to use by replacing 'wish' in the executable path with
'tclsh'. We only do this replacement on the filename part of the path,
just in case the string "wish" appears in the directory paths. Most of
the time the tclsh will be installed alongside wish so this replacement
is a sensible and safe default.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
git-gui: Paper bag fix error dialogs opening over the main window
If the main window is the only toplevel we have open then we
don't have a valid grab right now, so we need to assume the
best toplevel to use for the parent is ".".
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
git-gui: Ensure error dialogs always appear over all other windows
If we are opening an error dialog we want it to appear above all of
the other windows, even those that we may have opened with a grab
to make the window modal. Failure to do so may allow an error
dialog to open up (and grab focus!) under an existing toplevel,
making the user think git-gui has frozen up and is unresponsive,
as they cannot get to the dialog.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Clarified the meaning of git-add -u in the documentation
The git-add documentation did not state clearly that the -u switch
updates only the tracked files that are in the current directory and
its subdirectories.
Signed-off-by: Pekka Kaitaniemi <kaitanie@cc.helsinki.fi> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-clone.sh: properly configure remote even if remote's head is dangling
When cloning a remote repository which's HEAD refers to a nonexistent
ref, git-clone cloned all existing refs, but failed to write the
configuration for 'remote'. Now it detects the dangling remote HEAD,
refuses to checkout any local branch since HEAD refers to nowhere, but
properly writes the configuration for 'remote', so that subsequent
'git fetch's don't fail.
The problem was reported by Daniel Jacobowitz through
http://bugs.debian.org/466581
Signed-off-by: Gerrit Pape <pape@smarden.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
send-email: squelch warning due to comparing undefined $_ to ""
The check to see if initial_reply_to is defined was also comparing $_ to
"" for a reason I cannot ascertain (looking at the commit which made the
change didn't provide enlightenment), but if $_ is undefined, perl
generates a warning.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
cvsexportcommit: be graceful when "cvs status" reorders the arguments
In my use cases, "cvs status" sometimes reordered the passed filenames,
which often led to a misdetection of a dirty state (when it was in
reality a clean state).
I finally tracked it down to two filenames having the same basename.
So no longer trust the order of the results blindly, but actually check
the file name.
Since "cvs status" only returns the basename (and the complete path on the
server which is useless for our purposes), run "cvs status" several times
with lists consisting of files with unique (chomped) basenames.
Be a bit clever about new files: these are reported as "no file <blabla>",
so in order to discern it from existing files, prepend "no file " to the
basename.
In other words, one call to "cvs status" will not ask for two files
"blabla" (which does not yet exist) and "no file blabla" (which exists).
This patch makes cvsexportcommit slightly slower, when the list of changed
files has non-unique basenames, but at least it is accurate now.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename git-core rpm to just git and rename the meta-pacakge to git-all.
This fixes my favorite annoyance with the git rpm packaging: don't pull
in tla when I say yum install git! You wouldn't expect yum install gcc
to pull in gcc-gfortran, right?
With this change, and blanket 'yum update' will automatically pull in the
new 'git' package and push out the old 'git-core', and if the old 'git'
package was installed 'git-all' will be pulled in instead. A couple of
things do break though: 'yum update git-core', because yum behaves
differently when given a specific package name - it doesn't follow obsoletes.
Instead, 'yum install git' will pull in the new git rpm, which will then
push out the old 'git-core'. Similarly, to get the newest version of
the meta package, 'yum install git-all' will install git-all, which then
pushes out the old 'git' meta package.
Signed-off-by: Kristian Høgsberg <krh@redhat.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>