Help developers by making it easier to run most of the tests under
different versions of over-the-wire protocols.
* jt/test-protocol-version:
t5552: compensate for v2 filtering ref adv.
tests: fix protocol version for overspecifications
t5700: only run with protocol version 1
t5512: compensate for v0 only sending HEAD symrefs
t5503: fix overspecification of trace expectation
tests: always test fetch of unreachable with v0
t5601: check ssh command only with protocol v0
tests: define GIT_TEST_PROTOCOL_VERSION
"git worktree add" used to do a "find an available name with stat
and then mkdir", which is race-prone. This has been fixed by using
mkdir and reacting to EEXIST in a loop.
* ra/t3600-test-path-funcs:
t3600: use helpers to replace test -d/f/e/s <path>
t3600: modernize style
test functions: add function `test_file_not_empty`
"git rebase" uses the refs/rewritten/ hierarchy to store its
intermediate states, which inherently makes the hierarchy per
worktree, but it didn't quite work well.
* nd/rewritten-ref-is-per-worktree:
Make sure refs/rewritten/ is per-worktree
files-backend.c: reduce duplication in add_per_worktree_entries_to_dir()
files-backend.c: factor out per-worktree code in loose_fill_ref_dir()
When the "clean" filter can reduce the size of a huge file in the
working tree down to a small "token" (a la Git LFS), there is no
point in allocating a huge scratch area upfront, but the buffer is
sized based on the original file size. The convert mechanism now
allocates very minimum and reallocates as it receives the output
from the clean filter process.
* jh/resize-convert-scratch-buffer:
convert: avoid malloc of original file size
"git config --type=color ..." is meant to replace "git config --get-color"
but there is a slight difference that wasn't documented, which is
now fixed.
* jk/config-type-color-ends-with-lf:
config: document --type=color output is a complete line
A recent update broke "is this object available to us?" check for
well-known objects like an empty tree (which should yield "yes",
even when there is no on-disk object for an empty tree), which has
been corrected.
* jk/virtual-objects-do-exist:
rev-list: allow cached objects in existence check
On platforms where "git fetch" is killed with SIGPIPE (e.g. OSX),
the upload-pack that runs on the other end that hangs up after
detecting an error could cause "git fetch" to die with a signal,
which led to a flakey test. "git fetch" now ignores SIGPIPE during
the network portion of its operation (this is not a problem as we
check the return status from our write(2)s).
"git fsck --connectivity-only" omits computation necessary to sift
the objects that are not reachable from any of the refs into
unreachable and dangling. This is now enabled when dangling
objects are requested (which is done by default, but can be
overridden with the "--no-dangling" option).
* jk/fsck-doc:
fsck: always compute USED flags for unreachable objects
doc/fsck: clarify --connectivity-only behavior
"git rebase" that was reimplemented in C did not set ORIG_HEAD
correctly, which has been corrected.
* js/rebase-orig-head-fix:
built-in rebase: set ORIG_HEAD just once, before the rebase
built-in rebase: demonstrate that ORIG_HEAD is not set correctly
built-in rebase: use the correct reflog when switching branches
built-in rebase: no need to check out `onto` twice
The final report from "git bisect" used to show the suspected
culprit using a raw "diff-tree", with which there is no output for
a merge commit. This has been updated to use a more modern and
human readable output that still is concise enough.
* jk/bisect-final-output:
bisect: make diff-tree output prettier
bisect: fix internal diff-tree config loading
bisect: use string arguments to feed internal diff-tree
CFLAGS now can be tweaked when invoking Make while using
DEVELOPER=YesPlease; this did not work well before.
* ab/makefile-help-devs-more:
Makefile: allow for combining DEVELOPER=1 and CFLAGS="..."
Makefile: move the setting of *FLAGS closer to "include"
Makefile: Move *_LIBS assignment into its own section
Makefile: add/remove comments at top and tweak whitespace
Makefile: move "strip" assignment down from flags
Makefile: remove an out-of-date comment
When cloning with --recurse-submodules a superproject with at least one
submodule with HEAD pointing to an unborn branch, the clone goes
something like this:
Cloning into 'test'...
<messages about cloning of superproject>
Submodule '<name>' (<uri>) registered for path '<submodule path>'
Cloning into '<submodule path>'...
fatal: Couldn't find remote ref HEAD
Unable to fetch in submodule path '<submodule path>'
<messages about fetching with SHA-1>
From <uri>
* branch <hash> -> FETCH_HEAD
Submodule path '<submodule path>': checked out '<hash>'
In other words, first, a fetch is done with no hash arguments (that is,
a fetch of HEAD) resulting in a "Couldn't find remote ref HEAD" error;
then, a fetch is done given a hash, which succeeds.
The fetch given a hash was added in fb43e31f2b ("submodule: try harder
to fetch needed sha1 by direct fetching sha1", 2016-02-24), and the
"Unable to fetch..." message was downgraded from a fatal error to a
notice in e30d833671 ("git-submodule.sh: try harder to fetch a
submodule", 2018-05-16).
This commit improves the notice to be clearer that we are retrying the
fetch, and that the previous messages (in particular, the fatal errors
from fetch) do not necessarily indicate that the whole command fails. In
other words:
- If the HEAD-fetch succeeds and we then have the commit we want,
git-submodule prints no explanation.
- If the HEAD-fetch succeeds and we do not have the commit we want, but
the hash-fetch succeeds, git-submodule prints no explanation.
- If the HEAD-fetch succeeds and we do not have the commit we want, but
the hash-fetch fails, git-submodule prints a fatal error.
- If the HEAD-fetch fails, fetch prints a fatal error, and
git-submodule informs the user that it will retry by fetching
specific commits by hash.
- If the hash-fetch then succeeds, git-submodule prints no
explanation (besides the ones already printed).
- If the HEAD-fetch then fails, git-submodule prints a fatal error.
It could be said that we should just eliminate the HEAD-fetch
altogether, but that changes some behavior (in particular, some refs
that were opportunistically updated would no longer be), so I have left
that alone for now.
There is an analogous situation with the fetching code in fetch_finish()
and surrounding functions. For now, I have added a NEEDSWORK.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Makefile: fix unaligned loads in sha1dc with UBSan
The sha1dc library uses unaligned loads on platforms that support them.
This is normally what you'd want for performance, but it does cause
UBSan to complain when we compile with SANITIZE=undefined. Just like we
set -DNO_UNALIGNED_LOADS for our own code in that case, we should set
-DSHA1DC_FORCE_ALIGNED_ACCESS.
Of course that does nothing without pulling in the patches from sha1dc
to respect that define. So let's do that, too, updating both the
submodule link and our in-tree copy (from the same commit).
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
In commit 735285b403 ("am: fix signoff when other trailers are present",
2017-08-08) tests using variable $signoff were rewritten and it is no
longer used, so just remove it from the test setup.
Signed-off-by: Andrei Rybak <rybak.a.v@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the contributing guide and PR template seen by people who open pull
requests on GitHub, we mention the submitGit tool, which gives an
alternative to figuring out the mailing list. These days we also have
the similar GitGitGadget tool, and we should make it clear that this
is also an option.
We could continue to mention _both_ tools, but it's probably better to
pick one in order to avoid overwhelming the user with choice. After all,
one of the purposes here is to reduce friction for first-time or
infrequent contributors. And there are a few reasons to prefer GGG:
1. submitGit seems to still have a few rough edges. E.g., it doesn't
munge timestamps to help threaded mail readers handled out-of-order
delivery.
2. Subjectively, GGG seems to be more commonly used on the list these
days, especially by list regulars.
3. GGG seems to be under more active development (likely related to
point 2).
So let's actually swap out submitGit for GGG. While we're there, let's
put another link to the GGG page in the PR template, because that's
where users who are learning about it for the first time will want to go
to read more.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
We have something much better now: --rebase-merges (which is a
complete re-design --preserve-merges, with a lot of issues fixed such as
the inability to reorder commits with --preserve-merges).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git runs a stat loop to find a worktree name that's available and
then does mkdir on the found name. Turn it to mkdir loop to avoid
another invocation of worktree add finding the same free name and
creating the directory first.
Signed-off-by: Michal Suchanek <msuchanek@suse.de> Acked-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
If you use "log -L" with an output format like "--raw" or "--stat",
we'll silently ignore the format and just output the normal patch.
Let's detect and complain about this, which at least tells the user
what's going on.
The tests here aren't exhaustive over the set of all formats, but it
should at least let us know if somebody breaks the format-checking.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Makefile uses 'find' utility to enumerate all the *.h header
files, which is expensive on platforms with slow filesystems; it
now optionally uses "ls-files" if working within a repository,
which is a trick similar to how all sources are enumerated to run
ETAGS on.
* js/find-lib-h-with-ls-files-when-possible:
Makefile: use `git ls-files` to list header files, if possible
The set of header files used by "make hdr-check" unconditionally
included sha256/gcrypt.h, even when it is not used, causing the
make target to fail. We now skip it when GCRYPT_SHA256 is not in
use.
* rj/hdr-check-gcrypt-fix:
Makefile: fix 'hdr-check' when GCRYPT not installed
Recently the Git for Windows project started the upgrade process to
a MSYS2 runtime version based on Cygwin v3.x.
This has the very notable consequence that `$(uname -r)` no longer
reports a version starting with "2", but a version with "3".
That breaks our build, as df5218b4c30b (config.mak.uname: support MSys2,
2016-01-13) simply did not expect the version reported by `uname -r` to
depend on the underlying Cygwin version: it expected the reported
version to match the "2" in "MSYS2".
So let's invert that test case to test for *anything else* than a
version starting with "1" (for MSys). That should safeguard us for the
future, even if Cygwin ends up releasing versionsl like 314.272.65536.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t3600: use helpers to replace test -d/f/e/s <path>
Take advantage of helper functions test_path_is_dir(),
test_path_is_missing(), etc. to replace `test -d|f|e|s` since the
functions make the code more readable and have better error
messages.
Signed-off-by: Rohit Ashiwal <rohit.ashiwal265@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The tests in `t3600-rm.sh` were written long time ago, and has a lot
of style violations, including the mixed use of tabs and spaces, not
having the title and the opening quote of the body on the first line
of the tests, and other shell script style violations. Update it to
match the CodingGuidelines.
Signed-off-by: Rohit Ashiwal <rohit.ashiwal265@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
a9be29c981 (sequencer: make refs generated by the `label` command
worktree-local, 2018-04-25) adds refs/rewritten/ as per-worktree
reference space. Unfortunately (my bad) there are a couple places that
need update to make sure it's really per-worktree.
- add_per_worktree_entries_to_dir() is updated to make sure ref listing
look at per-worktree refs/rewritten/ instead of per-repo one [1]
- common_list[] is updated so that git_path() returns the correct
location. This includes "rev-parse --git-path".
This mess is created by me. I started trying to fix it with the
introduction of refs/worktree, where all refs will be per-worktree
without special treatments. Unfortunate refs/rewritten came before
refs/worktree so this is all we can do.
This also fixes logs/refs/worktree not being per-worktree.
[1] note that ref listing still works sometimes. For example, if you
have .git/worktrees/foo/refs/rewritten/bar AND the directory
.git/worktrees/refs/rewritten, refs/rewritten/bar will show up.
add_per_worktree_entries_to_dir() is only needed when the directory
.git/worktrees/refs/rewritten is missing.
Reported-by: Phillip Wood <phillip.wood123@gmail.com> Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 20d2a30f8ffe (Makefile: replace perl/Makefile.PL with simple make
rules, 2017-12-10), Git stopped using MakeMaker. Therefore, that
definition in the MINGW-specific section became useless.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Reviewed-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rather than parse options manually, which is both difficult to
read and error prone, parse options supplied to commit-tree
using the parse-options api.
It was discovered that the --no-gpg-sign option was documented
but not implemented in commit 70ddbd7767 (commit-tree: add missing
--gpg-sign flag, 2019-01-19), and the existing implementation
would attempt to translate the option as a tree oid. It was also
suggested earlier in commit 55ca3f99ae (commit-tree: add and document
--no-gpg-sign, 2013-12-13) that commit-tree should be migrated to
utilize the parse-options api, which could help prevent mistakes
like this in the future. Hence this change.
Also update the documentation to better describe that mixing
`-m` and `-F` options will correctly compose commit log messages in the
order in which the options are given.
In the process, mark various strings for translation.
Signed-off-by: Brandon Richardson <brandon1024.br@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "-L" is in use, we ignore any diff output format that the user
provides to us, and just always print a patch (with extra context lines
covering the whole area of interest). It's not entirely clear what we
should do with all formats (e.g., should "--stat" show just the diffstat
of the touched lines, or the stat for the whole file?).
But "-s" is pretty clear: the user probably wants to see just the
commits that touched those lines, without any diff at all. Let's at
least make that work.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
We write the output of a "clean" filter into a strbuf. Rather than
growing the strbuf dynamically as we read its output, we make the
initial allocation as large as the original input file. This is a good
guess when the filter is just tweaking a few bytes, but it's disastrous
when the point of the filter is to condense a very large file into a
short identifier (e.g., the way git-lfs and git-annex do). We may ask to
allocate many gigabytes, causing the allocation to fail and Git to
die().
Instead, let's just let strbuf do its usual growth.
When the clean filter does output something around the same size as the
worktree file, the buffer will need to be reallocated until it fits,
starting at 8192 and doubling in size. Benchmarking indicates that
reallocation is not a significant overhead for outputs up to a
few MB in size.
Signed-off-by: Joey Hess <id@joeyh.name> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the git-clean documentation, -x and -e documented .gitignore,
$GIT_DIR/info/excludes but neglected to mention the file pointed to by
core.excludesFile.
Remove specific list of files and, instead, reference gitignore(5)
documentation so that information is consolidated and the git-clean
documentation is more precise.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca> Helped-by: Martin Ågren <martin.agren@gmail.com> Helped-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Denton Liu <liu.denton@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
config: document --type=color output is a complete line
Even though the newer "--type=color" option to "git config" is meant
to be upward compatible with the traditional "--get-color" option,
unlike the latter, its output is not an incomplete line that lack
the LF at the end. That makes it consistent with output of other
types like "git config --type=bool".
Document it, as it sometimes surprises unsuspecting users.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t5512: compensate for v0 only sending HEAD symrefs
Protocol v2 supports sending non-HEAD symrefs, but this is not true of
protocol v0. Some tests expect protocol v0 behavior, so fix them to use
protocol v0.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
In order to extract the wants from a trace, a loop in t5503 currently
breaks if "0000" is found. This works for protocol v0 and v1, but not
v2. Instead, teach t5503 to look specifically for the "want" string,
which is compatible with all protocols.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some tests check that fetching an unreachable object fails, but protocol
v2 allows such fetches. Unset GIT_TEST_PROTOCOL_VERSION so that these
tests are always run using protocol v0.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
When running the SSH command as part of a fetch, Git will write "SendEnv
GIT_PROTOCOL" as an option if protocol v1 or v2 is used, but not v0.
Update all tests that check this to run Git with
GIT_TEST_PROTOCOL_VERSION=0.
I chose not to do a more thorough fix (for example, checking the value of
GIT_TEST_PROTOCOL_VERSION to see if the SendEnv check needs to be done)
because a set of patches [1] that unifies the handling of SSH options,
including writing "SendEnv GIT_PROTOCOL" regardless of protocol version,
is in progress. When that is done, this patch should be reverted, since
the functionality in here is no longer needed.
As of this patch, all tests pass if GIT_TEST_PROTOCOL_VERSION is set to
1.
Define a GIT_TEST_PROTOCOL_VERSION environment variable meant to be used
from tests. When set, this ensures protocol.version is at least the
given value, allowing the entire test suite to be run as if this
configuration is in place for all repositories.
As of this patch, all tests pass whether GIT_TEST_PROTOCOL_VERSION is
unset or set to 0. Some tests fail when GIT_TEST_PROTOCOL_VERSION is set
to 1 or 2, but this will be dealt with in subsequent patches.
This is based on work by Ævar Arnfjörð Bjarmason.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Unify RPC code for smart http in protocol v0/v1 and v2, which fixes
a bug in the latter (lack of authentication retry) and generally
improves the code base.
* jt/http-auth-proto-v2-fix:
remote-curl: use post_rpc() for protocol v2 also
remote-curl: refactor reading into rpc_state's buf
remote-curl: reduce scope of rpc_state.result
remote-curl: reduce scope of rpc_state.stdin_preamble
remote-curl: reduce scope of rpc_state.argv
"git diff --no-index" may still want to access Git goodies like
--ext-diff and --textconv, but so far these have been ignored,
which has been corrected.
* jk/diff-no-index-initialize:
diff: reuse diff setup for --no-index case
* jk/unused-params:
ref-filter: drop unused "sz" parameters
ref-filter: drop unused "obj" parameters
ref-filter: drop unused buf/sz pairs
files-backend: drop refs parameter from split_symref_update()
pack-objects: drop unused parameter from oe_map_new_pack()
merge-recursive: drop several unused parameters
diff: drop complete_rewrite parameter from run_external_diff()
diff: drop unused emit data parameter from sane_truncate_line()
diff: drop unused color reset parameters
diff: drop options parameter from diffcore_fix_diff_index()
"git prune" has been taught to take advantage of reachability
bitmap when able.
* jk/prune-optim:
t5304: rename "sha1" variables to "oid"
prune: check SEEN flag for reachability
prune: use bitmaps for reachability traversal
prune: lazily perform reachability traversal
Output from "diff --cc" did not show the original paths when the
merge involved renames. A new option adds the paths in the
original trees to the output.
Update the implementation of pack-redundant for performance in a
repository with many packfiles.
* sc/pack-redundant:
pack-redundant: consistent sort method
pack-redundant: rename pack_list.all_objects
pack-redundant: new algorithm to find min packs
pack-redundant: delete redundant code
pack-redundant: delay creation of unique_objects
t5323: test cases for git-pack-redundant
The %(trailers) formatter in "git log --format=..." now allows to
optionally pick trailers selectively by keyword, show only values,
etc.
* aw/pretty-trailers:
pretty: add support for separator option in %(trailers)
strbuf: separate callback for strbuf_expand:ing literals
pretty: add support for "valueonly" option in %(trailers)
pretty: allow showing specific trailers
pretty: single return path in %(trailers) handling
pretty: allow %(trailers) options with explicit value
doc: group pretty-format.txt placeholders descriptions
The diff machinery, one of the oldest parts of the system, which
long predates the parse-options API, uses fairly long and complex
handcrafted option parser. This is being rewritten to use the
parse-options API.
* nd/diff-parseopt:
diff.c: convert --raw
diff.c: convert -W|--[no-]function-context
diff.c: convert -U|--unified
diff.c: convert -u|-p|--patch
diff.c: prepare to use parse_options() for parsing
diff.h: avoid bit fields in struct diff_flags
diff.h: keep forward struct declarations sorted
parse-options: allow ll_callback with OPTION_CALLBACK
parse-options: avoid magic return codes
parse-options: stop abusing 'callback' for lowlevel callbacks
parse-options: add OPT_BITOP()
parse-options: disable option abbreviation with PARSE_OPT_KEEP_UNKNOWN
parse-options: add one-shot mode
parse-options.h: remove extern on function prototypes
"git checkout --no-overlay" can be used to trigger a new mode of
checking out paths out of the tree-ish, that allows paths that
match the pathspec that are in the current index and working tree
and are not in the tree-ish.
* tg/checkout-no-overlay:
revert "checkout: introduce checkout.overlayMode config"
checkout: introduce checkout.overlayMode config
checkout: introduce --{,no-}overlay option
checkout: factor out mark_cache_entry_for_checkout function
checkout: clarify comment
read-cache: add invalidate parameter to remove_marked_cache_entries
entry: support CE_WT_REMOVE flag in checkout_entry
entry: factor out unlink_entry function
move worktree tests to t24*