Move the definition of the transport-specific functions provided by
transports, whether declared in transport.c or transport-helper.c, into
an internal header. This means that transport-using code (as opposed to
transport-declaring code) can no longer access these functions (without
importing the internal header themselves), making it clear that they
should use the transport_*() functions instead, and also allowing the
interface between the transport mechanism and an individual transport to
independently evolve.
This is superficially a reversal of commit 824d5776c3f2 ("Refactor
struct transport_ops inlined into struct transport", 2007-09-19).
However, the scope of the involved variables was neither affected nor
discussed in that commit, and I think that the advantages in making
those functions more private outweigh the advantages described in that
commit's commit message. A minor additional point is that the code has
gotten more complicated since then, in that the function-pointer
variables are potentially mutated twice (once initially and once if
transport_take_over() is invoked), increasing the value of corralling
them into their own struct.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Prior to commit a2d725b7bdf7 ("Use an external program to implement
fetching with curl", 2009-08-05), if Git was compiled with NO_CURL, the
get_refs_list and fetch methods in struct transport might not be
populated, hence the checks in clone and fetch. After that commit, all
transports populate get_refs_list and fetch, making the checks in clone
and fetch redundant. Remove those checks.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t/lib-git-svn.sh: improve svnserve tests with parallel make test
Setting SVNSERVE_PORT enables several tests which require a local
svnserve daemon to be run (in t9113 & t9126). The tests share setup of
the local svnserve via `start_svnserve()`. The function uses svnserve's
`--listen-once` option, which causes svnserve to accept one connection
on the port, serve it, and exit. When running the tests in parallel
this fails if one test tries to start svnserve while the other is still
running.
Use the test number as the svnserve port (similar to httpd tests) to
avoid port conflicts. Developers can set GIT_TEST_SVNSERVE to any value
other than 'false' or 'auto' to enable these tests.
Acked-by: Eric Wong <e@80x24.org> Reviewed-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Todd Zullinger <tmz@pobox.com>
git-svn: convert CRLF to LF in commit message to SVN
Subversion since 1.6 does not accept CR characters in the commit
message, so filter it out on our end before 'git svn dcommit' sets
the svn:log property.
Reported-by: Brian Bennett <Brian.Bennett@Transamerica.com> Signed-off-by: Eric Wong <e@80x24.org>
"git send-email" tries to see if the sendmail program is available
in /usr/lib and /usr/sbin; extend the list of locations to be
checked to also include directories on $PATH.
* fk/sendmail-from-path:
git-send-email: honor $PATH for sendmail binary
The tagnames "git log --decorate" uses to annotate the commits can
now be limited to subset of available refs with the two additional
options, --decorate-refs[-exclude]=<pattern>.
* ra/decorate-limit-refs:
log: add option to choose which refs to decorate
An infrastructure to define what hash function is used in Git is
introduced, and an effort to plumb that throughout various
codepaths has been started.
* bc/hash-algo:
repository: fix a sparse 'using integer as NULL pointer' warning
Switch empty tree and blob lookups to use hash abstraction
Integrate hash algorithm support with repo setup
Add structure representing hash algorithm
setup: expose enumerated repo info
After commit 0d0bac67ce3b ("transport: drop support for git-over-rsync",
2016-02-01), no transport in Git populates the "push" entry in the
transport vtable. Remove this entry.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com> Reviewed-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
install-doc-quick: allow specifying what ref to install
We allow the builders, who want to install the preformatted manpages
and html documents, to specify where in their filesystem these two
repositories are stored. Let them also specify which ref (or even a
revision) to grab the preformatted material from.
Signed-off-by: Randall S. Becker <rsbecker@nexbridge.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Compiled test helpers in t/helper are out of sync with the .gitignore
files quite frequently. This can happen when new test helpers are added,
but the explicit .gitignore file is not updated in the same commit, or
when you forget to 'make clean' before checking out a different version
of git, as the different version may have a different explicit list of
test helpers to ignore.
Fix this by having an overly broad ignore pattern in that directory:
Anything, except C and shell source, will be ignored.
Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
travis-ci: use 'set -x' in 'ci/*' scripts for extra tracing output
While the build logic was embedded in our '.travis.yml', Travis CI
used to produce a nice trace log including all commands executed in
those embedded scriptlets. Since 657343a60 (travis-ci: move Travis CI
code into dedicated scripts, 2017-09-10), however, we only see the
name of the dedicated scripts, but not what those scripts are actually
doing, resulting in a less useful trace log. A patch later in this
series will move setting environment variables from '.travis.yml' to
the 'ci/*' scripts, so not even those will be included in the trace
log.
Use 'set -x' in 'ci/lib-travisci.sh', which is sourced in most other
'ci/*' scripts, so we get trace log about the commands executed in all
of those scripts.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
travis-ci: set GIT_TEST_HTTPD in 'ci/lib-travisci.sh'
Commit 657343a60 (travis-ci: move Travis CI code into dedicated
scripts, 2017-09-10) converted '.travis.yml's default 'before_install'
scriptlet to the 'ci/install-dependencies.sh' script, and while doing
so moved setting GIT_TEST_HTTPD=YesPlease for the 64-bit GCC and Clang
Linux build jobs to that script. This is wrong for two reasons:
- The purpose of that script is, as its name suggests, to install
dependencies, not to set any environment variables influencing
which tests should be run (though, arguably, this was already an
issue with the original 'before_install' scriptlet).
- Setting the variable has no effect anymore, because that script is
run in a separate shell process, and the variable won't be visible
in any of the other scripts, notably in 'ci/run-tests.sh'
responsible for, well, running the tests.
Luckily, this didn't have a negative effect on our Travis CI build
jobs, because GIT_TEST_HTTPD is a tri-state variable defaulting to
"auto" and a functioning web server was installed in those Linux build
jobs, so the httpd tests were run anyway.
Apparently the httpd tests run just fine without GIT_TEST_HTTPD being
set, therefore we could simply remove this environment variable.
However, if a bug were to creep in to change the Travis CI build
environment to run the tests as root or to not install Apache, then
the httpd tests would be skipped and the build job would still
succeed. We would only notice if someone actually were to look
through the build job's trace log; but who would look at the trace log
of a successful build job?!
Since httpd tests are important, we do want to run them and we want to
be loudly reminded if they can't be run. Therefore, move setting
GIT_TEST_HTTPD=YesPlease for the 64-bit GCC and Clang Linux build jobs
to 'ci/lib-travisci.sh' to ensure that the build job fails when the
httpd tests can't be run. (We could set it in 'ci/run-tests.sh' just
as well, but it's better to keep all environment variables in one
place in 'ci/lib-travisci.sh'.)
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
travis-ci: move setting environment variables to 'ci/lib-travisci.sh'
Our '.travis.yml's 'env.global' section sets a bunch of environment
variables for all build jobs, though none of them actually affects all
build jobs. It's convenient for us, and in most cases it works just
fine, because irrelevant environment variables are simply ignored.
However, $GIT_SKIP_TESTS is an exception: it tells the test harness to
skip the two test scripts that are prone to occasional failures on
OSX, but as it's set for all build jobs those tests are not run in any
of the build jobs that are capable to run them reliably, either.
Therefore $GIT_SKIP_TESTS should only be set in the OSX build jobs,
but those build jobs are included in the build matrix implicitly (i.e.
by combining the matrix keys 'os' and 'compiler'), and there is no way
to set an environment variable only for a subset of those implicit
build jobs. (Unless we were to add new scriptlets to '.travis.yml',
which is exactly the opposite direction that we took with commit 657343a60 (travis-ci: move Travis CI code into dedicated scripts,
2017-09-10)).
So move setting $GIT_SKIP_TESTS to 'ci/lib-travisci.sh', where it can
trivially be set only for the OSX build jobs.
Furthermore, move setting all other environment variables from
'.travis.yml' to 'ci/lib-travisci.sh', too, because a couple of
environment variables are already set there, and this way all
environment variables will be set in the same place. All the logic
controlling our builds is already in the 'ci/*' scripts anyway, so
there is really no good reason to keep the environment variables
separately.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
travis-ci: introduce a $jobname variable for 'ci/*' scripts
A couple of 'ci/*' scripts are shared between different build jobs:
'ci/lib-travisci.sh', being a common library, is sourced from almost
every script, while 'ci/install-dependencies.sh', 'ci/run-build.sh'
and 'ci/run-tests.sh' are shared between the "regular" GCC and Clang
Linux and OSX build jobs, and the latter two scripts are used in the
GETTEXT_POISON Linux build job as well.
Our builds could benefit from these shared scripts being able to
easily tell which build job they are taking part in. Now, it's
already quite easy to tell apart Linux vs OSX and GCC vs Clang build
jobs, but it gets trickier with all the additional Linux-based build
jobs included explicitly in the build matrix.
Unfortunately, Travis CI doesn't provide much help in this regard.
The closest we've got is the $TRAVIS_JOB_NUMBER variable, the value of
which is two dot-separated integers, where the second integer
indicates a particular build job. While it would be possible to use
that second number to identify the build job in our shared scripts, it
doesn't seem like a good idea to rely on that:
- Though the build job numbering sequence seems to be stable so far,
Travis CI's documentation doesn't explicitly states that it is
indeed stable and will remain so in the future. And even if it
were stable,
- if we were to remove or insert a build job in the middle, then the
job numbers of all subsequent build jobs would change accordingly.
So roll our own means of simple build job identification and introduce
the $jobname environment variable in our builds, setting it in the
environments of the explicitly included jobs in '.travis.yml', while
constructing one in 'ci/lib-travisci.sh' as the combination of the OS
and compiler name for the GCC and Clang Linux and OSX build jobs. Use
$jobname instead of $TRAVIS_OS_NAME in scripts taking different
actions based on the OS and build job (when installing P4 and Git LFS
dependencies and including them in $PATH). The following two patches
will also rely on $jobname.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
submodule: convert get_next_submodule to not rely on the_index
Instead of implicitly relying on the global 'the_index', convert
'get_next_submodule()' to use the index of the repository stored in the
callback data 'struct submodule_parallel_fetch'.
Since this removes the last user of the index compatibility macros,
define 'NO_THE_INDEX_COMPATIBILITY_MACROS' to prevent future users of
these macros in submodule.c.
Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
submodule: used correct index in is_staging_gitmodules_ok
Commit 883e248b8 (fsmonitor: teach git to optionally utilize a file
system monitor to speed up detecting new or changed files., 2017-09-22)
introduced a call to 'ce_match_stat()' in 'is_staging_gitmodules_ok()'
which implicitly relys on the the global 'the_index' instead of the
passed in 'struct index_state'. Fix this by changing the call to
'ie_match_stat()' and using the passed in index_state struct.
Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add tests for pull --verify-signatures with untrusted, bad and no
signatures. Previously the only test for --verify-signatures was to
make sure that pull --rebase --verify-signatures result in a warning
(t5520-pull.sh).
Signed-off-by: Hans Jerry Illikainen <hji@dyntopia.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git merge --verify-signatures can be used to verify that the tip commit
of the branch being merged in is properly signed, but it's cumbersome to
have to specify that every time.
Add a configuration option that enables this behaviour by default, which
can be overridden by --no-verify-signatures.
Signed-off-by: Hans Jerry Illikainen <hji@dyntopia.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Write some docs for functions in pretty.h.
Take it as a first draft, they would be changed later.
Signed-off-by: Olga Telezhnaia <olyatelezhnaya@gmail.com> Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Create header for pretty.c to make formatting interface more structured.
This is a middle point, this file would be merged further with other
files which contain formatting stuff.
Signed-off-by: Olga Telezhnaia <olyatelezhnaya@gmail.com> Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
diff: add tests for --relative without optional prefix value
We already have tests for --relative, but they currently only test when
a prefix has been provided. This fails to test the case where --relative
by itself should use the current directory as the prefix.
Teach the check_$type functions to take a directory argument to indicate
which subdirectory to run the git commands in. Add a new test which uses
this to test --relative without a prefix value.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
We often accept both a "--key" option and a "--key=<val>" option.
These options currently are parsed using something like:
if (!strcmp(arg, "--key")) {
/* do something */
} else if (skip_prefix(arg, "--key=", &arg)) {
/* do something with arg */
}
which is a bit cumbersome compared to just:
if (skip_to_optional_arg(arg, "--key", &arg)) {
/* do something with arg */
}
This also introduces skip_to_optional_arg_default() for the few
cases where something different should be done when the first
argument is exactly "--key" than when it is exactly "--key=".
In general it is better for UI consistency and simplicity if
"--key" and "--key=" do the same thing though, so that using
skip_to_optional_arg() should be encouraged compared to
skip_to_optional_arg_default().
Note that these functions can be used to parse any "key=value"
string where "key" is also considered as valid, not just
command line options.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
When worktree functionality was originally implemented, the possibility
of 'clone --local' from within a worktree was overlooked, with the
result that the location of the "objects" directory of the source
repository was computed incorrectly, thus the objects could not be
copied or hard-linked by the clone. This shortcoming was addressed by 744e469755 (clone: allow --local from a linked checkout, 2015-09-28).
However, the related case of 'clone --shared' (despite being handled
only a few lines away from the 'clone --local' case) was not fixed by 744e469755, with a similar result of the "objects" directory location
being incorrectly computed for insertion into the 'alternates' file.
Fix this.
Reported-by: Marc-André Lureau <marcandre.lureau@gmail.com> Signed-off-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
transport-helper: plug strbuf and string_list leaks
Transfer ownership of detached strbufs to string_lists of the
duplicating variety by calling string_list_append_nodup() instead of
string_list_append() to avoid duplicating and then leaking the buffer.
While at it make sure to release the string_list when done;
push_refs_with_export() already does that.
Reported-by: Jeff King <peff@peff.net> Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
You may want to run the test suite with a different shell
than you use to build Git. For instance, you may build with
SHELL_PATH=/bin/sh (because it's faster, or it's what you
expect to exist on systems where the build will be used) but
want to run the test suite with bash (e.g., since that
allows using "-x" reliably across the whole test suite).
There's currently no good way to do this.
You might think that doing two separate make invocations,
like:
make &&
make -C t SHELL_PATH=/bin/bash
would work. And it _almost_ does. The second make will see
our bash SHELL_PATH, and we'll use that to run the
individual test scripts (or tell prove to use it to do so).
So far so good.
But this breaks down when "--tee" or "--verbose-log" is
used. Those options cause the test script to actually
re-exec itself using $SHELL_PATH. But wait, wouldn't our
second make invocation have set SHELL_PATH correctly in the
environment?
Yes, but test-lib.sh sources GIT-BUILD-OPTIONS, which we
built during the first "make". And that overrides the
environment, giving us the original SHELL_PATH again.
Let's introduce a new variable that lets you specify a
specific shell to be run for the test scripts. Note that we
have to touch both the main and t/ Makefiles, since we have
to record it in GIT-BUILD-OPTIONS in one, and use it in the
latter.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "-x" tracing option implies "--verbose". This is a
problem when running under a TAP harness like "prove", where
we need to use "--verbose-log" instead. Instead, let's
handle this the same way we do for --valgrind, including the
recent fix from 88c6e9d31c (test-lib: --valgrind should not
override --verbose-log, 2017-09-05). Namely, let's enable
--verbose only when we know there isn't a more specific
verbosity option indicated.
Note that we also have to tweak `want_trace` to turn it on
(previously we just lumped $verbose_log in with $verbose,
but now we don't necessarily auto-set the latter).
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
File descriptors 3 and 4 are special in our test suite, as
they link back to the test script's original stdout and
stderr. Normally this isn't something tests need to worry
about: they are free to clobber these descriptors for
sub-commands without affecting the overall script.
But there's one very special thing about descriptor 4: since d88785e424 (test-lib: set BASH_XTRACEFD automatically,
2016-05-11), we ask bash to output "set -x" output to it by
number. This goes to _any_ descriptor 4, even if it no
longer points to the place it did when we set BASH_XTRACEFD.
But in t5615, we run a shell loop with descriptor 4
redirected. As a result, t5615 works with non-bash shells
even with "-x". And it works with bash without "-x". But the
combination of "bash t5615-alternate-env.sh -x" gets a test
failure (because our "set -x" output pollutes one of the
files).
We can fix this by using any descriptor _except_ the magical
4. So let's switch arbitrarily to using 5/6 in this loop,
not 3/4.
Another alternative is to use a different descriptor for
BASH_XTRACEFD. But picking an unused one turns out to be
hard. Most shells limit us to 9 numbered descriptors. Bash
can handle more, but:
- while the BASH_XTRACEFD is specific to bash, GIT_TRACE=4
has a similar problem, and would affect all shells
- constructs like "999>/dev/null" are synticatically
invalid to non-bash shells. So we have to actually bury
it inside an eval, which creates more complications.
Of the numbers 1-9, you might think that "9" would be less
used than "4". But it's not; many of our scripts use
descriptors 8 and 9 (probably under the assumption that they
are high and therefore unused). The least-used descriptor is
currently "7". We could switch to that, but we're just
trading one magic number for another.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the test suite's "-x" option is used with bash, we end
up seeing cleanup cruft in the output:
$ bash t0001-init.sh -x
[...]
++ diff -u expected actual
+ test_eval_ret_=0
+ want_trace
+ test t = t
+ test t = t
+ set +x
ok 42 - re-init from a linked worktree
This ranges from mildly annoying (for a successful test) to
downright confusing (when we say "last command exited with
error", but it's really 5 commands back).
We normally are able to suppress this cleanup. As the
in-code comment explains, we can't convince the shell not to
print it, but we can redirect its stderr elsewhere.
But since d88785e424 (test-lib: set BASH_XTRACEFD
automatically, 2016-05-11), that doesn't hold for bash. It
sends the "set -x" output directly to descriptor 4, not to
stderr.
We can fix this by also redirecting descriptor 4, and
paying close attention to which commands redirected and
which are not (see the updated comment).
Two alternatives I considered and rejected:
- unsetting and setting BASH_XTRACEFD; doing so closes the
descriptor, which we must avoid
- we could keep everything in a single block as before,
redirect 4>/dev/null there, but retain 5>&4 as a copy.
And then selectively restore 4>&5 for commands which
should be allowed to trace. This would work, but the
descriptor swapping seems unnecessarily confusing.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 5b4efea666 (cvsimport: shell-quote variable used in
backticks, 2017-09-11) tried to shell-quote a variable, but
forgot to use the "/g" modifier to apply the quoting to the
whole variable. This means we'd miss any embedded
single-quotes after the first one.
Reported-by: <littlelailo@yahoo.com> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
docs/pretty-formats: mention commas in %(trailers) syntax
Commit 84ff053d47 (pretty.c: delimit "%(trailers)" arguments
with ",", 2017-10-01) switched the syntax of the trailers
placeholder, but forgot to update the documentation in
pretty-formats.txt.
There's no need to mention the old syntax; it was never in a
released version of Git.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
builtin/branch: strip refs/heads/ using skip_prefix
Instead of hard-coding the offset strlen("refs/heads/") to skip
the prefix "refs/heads/" use the skip_prefix() function which
is more communicative and verifies that the string actually
starts with that prefix.
Signed-off-by: Kaartic Sivaraam <kaartic.sivaraam@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
branch: update warning message shown when copying a misnamed branch
When a user tries to rename a branch that has a "bad name" (e.g.,
starts with a '-') then we warn them that the misnamed branch has
been renamed "away". A similar message is shown when trying to create
a copy of a misnamed branch even though it doesn't remove the misnamed
branch. This is not correct and may confuse the user.
So, update the warning message shown to be more precise that only a copy
of the misnamed branch has been created. It's better to show the warning
message than not showing it at all as it makes the user aware of the
presence of a misnamed branch.
Signed-off-by: Kaartic Sivaraam <kaartic.sivaraam@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
branch: group related arguments of create_branch()
39bd6f726 (Allow checkout -B <current-branch> to update the current
branch, 2011-11-26) added 'clobber_head' (now, 'clobber_head_ok')
"before" 'track' as 'track' was closely related 'clobber_head' for
the purpose the commit wanted to achieve. Looking from the perspective
of how the arguments are used it turns out that 'clobber_head' is
more related to 'force' than it is to 'track'.
So, re-order the arguments to keep the related arguments close
to each other.
Signed-off-by: Kaartic Sivaraam <kaartic.sivaraam@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
branch: improve documentation and naming of create_branch() parameters
The documentation for 'create_branch()' was incomplete as it didn't say
what certain parameters were used for. Further a parameter name wasn't
very communicative.
So, add missing documentation for the sake of completeness and easy
reference. Also, rename the concerned parameter to make its name more
communicative.
Signed-off-by: Kaartic Sivaraam <kaartic.sivaraam@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-clone and git-checkout both invoke the post-checkout hook following
a successful checkout, yet git-worktree neglects to do so even though it
too "checks out" the worktree. Fix this oversight.
Implementation note: The newly-created worktree may reference a branch
or be detached. In the latter case, a commit lookup is performed, though
the result is used only in a boolean sense to (a) determine if the
commit actually exists, and (b) assign either the branch name or commit
ID to HEAD. Since the post-commit hook needs to know the ID of the
checked-out commit, the lookup now needs to be done in all cases, rather
than only when detached. Consequently, a new boolean is needed to handle
(b) since the lookup result itself can no longer perform that role.
Reported-by: Matthew K Gumbel <matthew.k.gumbel@intel.com> Signed-off-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
strbuf: release memory on read error in strbuf_read_once()
If other strbuf add functions cause the first allocation and
subsequently encounter an error then they release the memory, restoring
the pristine state of the strbuf. That simplifies error handling for
callers.
Do the same in strbuf_read_once(), and do it also in case no bytes were
read -- which may or may not be an error as well, depending on the
caller.
Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
launch_editor(): indicate that Git waits for user input
When a graphical GIT_EDITOR is spawned by a Git command that opens
and waits for user input (e.g. "git rebase -i"), then the editor window
might be obscured by other windows. The user might be left staring at
the original Git terminal window without even realizing that s/he needs
to interact with another window before Git can proceed. To this user Git
appears hanging.
Print a message that Git is waiting for editor input in the original
terminal and get rid of it when the editor returns, if the terminal
supports erasing the last line. Also, make sure that our message is
terminated with a whitespace so that any message the editor may show
upon starting up will be kept separate from our message.
Power users might not want to see this message or their editor might
already print such a message (e.g. emacsclient). Allow these users to
suppress the message by disabling the "advice.waitingForEditor" config.
The standard advise() function is not used here as it would always add
a newline which would make deleting the message harder.
Helped-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Lars Schneider <larsxschneider@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
setup.c: fix comment about order of .git directory discovery
Since gitfiles were introduced in b44ebb19e (Add platform-independent
.git "symlink", 2008-02-20) the order of checks during .git directory
discovery is: gitfile, gitdir, bare repo. However, that commit did
only partially update the in-code comment describing this order,
missing the last line which still puts gitdir before gitfile.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
diff-tree: read the index so attribute checks work in bare repositories
A regression was introduced in 557a5998d (submodule: remove
gitmodules_config, 2017-08-03) to how attribute processing was handled
in bare repositories when running the diff-tree command.
By default the attribute system will first try to read ".gitattribute"
files from the working tree and then falls back to reading them from the
index if there isn't a copy checked out in the worktree. Prior to 557a5998d the index was read as a side effect of the call to
'gitmodules_config()' which ensured that the index was already populated
before entering the attribute subsystem.
Since the call to 'gitmodules_config()' was removed the index is no
longer being read so when the attribute system tries to read from the
in-memory index it doesn't find any ".gitattribute" entries effectively
ignoring any configured attributes.
Fix this by explicitly reading the index during the setup of diff-tree.
Reported-by: Ben Boeckel <ben.boeckel@kitware.com> Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-prompt: fix reading files with windows line endings
If any of the files read by __git_eread have \r\n line endings, read
will only strip \n, leaving \r. This results in an ugly prompt, where
instead of
user@pc MINGW64 /path/to/repo (BARE:master)
the last parenthesis is printed over the beginning of the prompt like
)ser@pc MINGW64 /path/to/repo (BARE:master
This patch fixes the issue by changing the internal field separator
variable IFS to $'\r\n' before using the read builtin command.
Note that ANSI-C Quoting/POSIX Quoting ($'...') is supported by bash
as well as zsh, which are the current targets of git-prompt, cf.
contrib/completion/git-prompt.sh.
Signed-off-by: Robert Abel <rabel@robertabel.eu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-prompt: make __git_eread intended use explicit
__git_eread is used to read a single line of a given file (if it exists)
into a single variable stripping the EOL.
This patch removes the unused capability to split file contents into tokens
by passing multiple variable names. Add a comment and explicitly use $2
instead of misleading $@ as argument to the read builtin command.
Signed-off-by: Robert Abel <rabel@robertabel.eu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some users might want to have the --guess-remote option introduced in
the previous commit on by default, so they don't have to type it out
every time they create a new worktree.
Add a config option worktree.guessRemote that allows users to configure
the default behaviour for themselves.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
worktree: add --guess-remote flag to add subcommand
Currently 'git worktree add <path>' creates a new branch named after the
basename of the <path>, that matches the HEAD of whichever worktree we
were on when calling "git worktree add <path>".
It's sometimes useful to have 'git worktree add <path> behave more like
the dwim machinery in 'git checkout <new-branch>', i.e. check if the new
branch name, derived from the basename of the <path>, uniquely matches
the branch name of a remote-tracking branch, and if so check out that
branch and set the upstream to the remote-tracking branch.
Add a new --guess-remote option that enables exactly that behaviour.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
trace: improve performance while category is disabled
Move just enough code from trace.c into trace.h header so all code
necessary to determine that trace is disabled could be inlined to
calling functions. Then perform the check if the trace key is
enabled sooner in call chain.
Signed-off-by: Gennady Kupava <gkupava@bloomberg.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The ssh-variant 'simple' introduced earlier broke existing
installations by not passing --port/-4/-6 and not diagnosing an
attempt to pass these as an error. Instead, default to
automatically detect how compatible the GIT_SSH/GIT_SSH_COMMAND is
to OpenSSH convention and then error out an invocation to make it
easier to diagnose connection errors.
* jn/ssh-wrappers:
connect: correct style of C-style comment
ssh: 'simple' variant does not support --port
ssh: 'simple' variant does not support -4/-6
ssh: 'auto' variant to select between 'ssh' and 'simple'
connect: split ssh option computation to its own function
connect: split ssh command line options into separate function
connect: split git:// setup into a separate function
connect: move no_fork fallback to git_tcp_connect
ssh test: make copy_ssh_wrapper_as clean up after itself
A new mechanism to upgrade the wire protocol in place is proposed
and demonstrated that it works with the older versions of Git
without harming them.
* bw/protocol-v1:
Documentation: document Extra Parameters
ssh: introduce a 'simple' ssh variant
i5700: add interop test for protocol transition
http: tell server that the client understands v1
connect: tell server that the client understands v1
connect: teach client to recognize v1 server response
upload-pack, receive-pack: introduce protocol version 1
daemon: recognize hidden request arguments
protocol: introduce protocol extension mechanisms
pkt-line: add packet_write function
connect: in ref advertisement, shallows are last
Internaly we use 0{40} as a placeholder object name to signal the
codepath that there is no such object (e.g. the fast-forward check
while "git fetch" stores a new remote-tracking ref says "we know
there is no 'old' thing pointed at by the ref, as we are creating
it anew" by passing 0{40} for the 'old' side), and expect that a
codepath to locate an in-core object to return NULL as a sign that
the object does not exist. A look-up for an object that does not
exist however is quite costly with a repository with large number
of packfiles. This access pattern has been optimized.
* jk/fewer-pack-rescan:
sha1_file: fast-path null sha1 as a missing object
everything_local: use "quick" object existence check
p5551: add a script to test fetch pack-dir rescans
t/perf/lib-pack: use fast-import checkpoint to create packs
p5550: factor out nonsense-pack creation
"git config --expiry-date gc.reflogexpire" can read "2.weeks" from
the configuration and report it as a timestamp, just like "--int"
would read "1k" and report 1024, to help consumption by scripts.
"git branch --set-upstream" has been deprecated and (sort of)
removed, as "--set-upstream-to" is the preferred one these days.
The documentation still had "--set-upstream" listed on its
synopsys section, which has been corrected.
* tz/branch-doc-remove-set-upstream:
branch doc: remove --set-upstream from synopsis
* cc/perf-run-config:
perf: store subsection results in "test-results/$GIT_PERF_SUBSECTION/"
perf/run: show name of rev being built
perf/run: add run_subsection()
perf/run: update get_var_from_env_or_config() for subsections
perf/run: add get_subsections()
perf/run: add calls to get_var_from_env_or_config()
perf/run: add GIT_PERF_DIRS_OR_REVS
perf/run: add get_var_from_env_or_config()
perf/run: add '--config' option to the 'run' script
"git checkout --recursive" may overwrite and rewind the history of
the branch that happens to be checked out in submodule
repositories, which might not be desirable. Detach the HEAD but
still allow the recursive checkout to succeed in such a case.
* sb/submodule-recursive-checkout-detach-head:
Documentation/checkout: clarify submodule HEADs to be detached
recursive submodules: detach HEAD from new state
Merge branch 'sb/test-cherry-pick-submodule-getting-in-a-way' into maint
The three-way merge performed by "git cherry-pick" was confused
when a new submodule was added in the meantime, which has been
fixed (or "papered over").
* sb/test-cherry-pick-submodule-getting-in-a-way:
merge-recursive: handle addition of submodule on our side of history
t/3512: demonstrate unrelated submodule/file conflict as cherry-pick failure
Merge branch 'pw/sequencer-recover-from-unlockable-index' into maint
The sequencer machinery (used by "git cherry-pick A..B", and "git
rebase -i", among other things) would have lost a commit if stopped
due to an unlockable index file, which has been fixed.
* pw/sequencer-recover-from-unlockable-index:
sequencer: reschedule pick if index can't be locked
When "git rebase" prepared an mailbox of changes and fed it to "git
am" to replay them, it was confused when a stray "From " happened
to be in the log message of one of the replayed changes. This has
been corrected.
* ew/rebase-mboxrd:
rebase: use mboxrd format to avoid split errors