"git ls-files --exclude=t -i" did not consider anything under t/
as excluded, as it did not pay attention to exclusion of leading
paths while walking the index. Other two users of excluded() are
also updated.
* jc/ls-files-i-dir:
dir.c: make excluded() file scope static
unpack-trees.c: use path_excluded() in check_ok_to_remove()
builtin/add.c: use path_excluded()
path_excluded(): update API to less cache-entry centric
ls-files -i: micro-optimize path_excluded()
ls-files -i: pay attention to exclusion of leading paths
"git request-pull $url dev" when the tip of "dev" branch was tagged
with "ext4-for-linus" used the contents from the tag in the output
but still asked the "dev" branch to be pulled, not the tag.
* jc/request-pull-match-tagname:
request-pull: really favor a matching tag
"git clone --local $path" started its life as an experiment to
optionally use link/copy when cloning a repository on the disk, but
we didn't deprecate it after we made the option a no-op to always
use the optimization.
The command learns "--no-local" option to turn this off, as a more
explicit alternative over use of file:// URL.
* jk/clone-local:
clone: allow --no-local to turn off local optimizations
docs/clone: mention that --local may be ignored
I haven't decided what to call this one, 1.7.12, 1.8.0, or even 2.0.
Given that summer is a relatively slow season, I suspect 1.7.12 is
the most likely outcome, but we will see.
Commit fe77b41 introduced a new attribute to let the linkgit macro
create cross-directory HTML references from the technical/ and howto/
subdirectories back to the main documentation. We define that attribute
to "../" on the command-line when building inside those subdirectories,
and otherwise leave it unset under the assumption that it would default
to being blank. Instead, asciidoc omits the link entirely, leading to
broken documentation. Fix this by defining git-relative-html-prefix to
blank in asciidoc.conf (and an instance on the command-line, when
present, will override it).
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Do not autosquash in case of an implied interactive rebase
The option to autosquash is only used in case of an interactive rebase.
When merges are preserved, rebase uses an interactive rebase internally,
but in this case autosquash should still be disabled.
Signed-off-by: Vincent van Ravesteijn <vfr@lyx.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
perl/Makefile: install Git::SVN::* when NO_PERL_MAKEMAKER=yes, too
v1.7.11-rc1~12^2~2 (2012-05-27) and friends split some git-svn code
into separate modules but did not update the fallback rules to install
them when NO_PERL_MAKEMAKER is set. Add the appropriate rules so
users without MakeMaker can use git-svn again.
perl/Makefile.PL: warn about duplicate module list in perl/Makefile
Adding or removing a module requires modifying both files to support
builds with and without MakeMaker. Add a comment to remind patch
authors and reviewers at the crucial moment.
Longer term, it would be nicer to maintain a single list, perhaps in a
separate file used by both build systems.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
completion: put main git and gitk completion functions back into git namespace
Commit 7f02f3d7 (completion: rename internal helpers _git and _gitk,
2012-05-19) renamed said functions to _main_git() and _main_gitk(),
respectively. By convention the name of our git-completion-specific
functions start with '_git' or '__git' prefix, so rename those
functions once again to put them back into our "namespace". Use the
two underscore prefix, because _git_main() could be mistaken for the
completion function of the (not yet existing) 'git main' command.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
gitweb: Skip 'modification times' tests when no date parser available
The If-Modified-Since support in Gitweb is conditional on the
availability of a date parser from either the HTTP::Date or
Time::ParseDate modules. If a suitable parser is not available,
then the corresponding 'modification times' tests should be skipped.
Introduce the DATE_PARSER test prerequisite and use it to skip
all of the dependent tests.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Tone down the lines that credit people involved and make them
comments, so that integrators who edit their merge messages can
still make use of the information, but lazy ones will not leave
the unverified guesses placed on the "via" line.
* jc/fmt-merge-msg-people:
fmt-merge-msg: make attribution into comment lines
fast-export: report SHA-1 instead of gibberish when marks exist already
Cc: Pieter de Bie <pdebie@ai.rug.nl> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Max Horn <max@quendi.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-svn: use YAML format for mergeinfo cache when possible
Since v1.7.0-rc2~11 (git-svn: persistent memoization, 2010-01-30),
git-svn has maintained some private per-repository caches in
.git/svn/.caches to avoid refetching and recalculating some
mergeinfo-related information with every "git svn fetch".
These caches use the 'nstore' format from the perl core module
Storable, which can be read and written quickly and was designed for
transfer over the wire (the 'n' stands for 'network'). This format is
endianness-independent and independent of floating-point
representation.
Unfortunately the format is *not* independent of the perl version ---
new perl versions will write files that very old perl cannot read.
Worse, the format is not independent of the size of a perl integer.
So if you toggle perl's use64bitint compile-time option, then using
'git svn fetch' on your old repositories produces errors like this:
Byte order is not compatible at ../../lib/Storable.pm (autosplit
into ../../lib/auto/Storable/_retrieve.al) line 380, at
/usr/share/perl/5.12/Memoize/Storable.pm line 21
That is, upgrading perl to a version that uses use64bitint for the
first time makes git-svn suddenly refuse to fetch in existing
repositories. Removing .git/svn/.caches lets git-svn recover.
It's time to switch to a platform independent serializer backend with
better compatibility guarantees. This patch uses YAML::Any.
Other choices were considered:
- thawing data from Data::Dumper involves "eval". Doing that without
creating a security risk is fussy.
- the JSON API works on scalars in memory and doesn't provide a
standard way to serialize straight to disk.
YAML::Any is reasonably fast and has a pleasant API. In most
backends, LoadFile() reads the entire file into a scalar anyway and
converts it as a second step, but having an interface that allows the
deserialization to happen on the fly without a temporary is still a
comfort.
YAML::Any is not a core perl module, so we take care to use it when
and only when it is available. Installations without that module
should fall back to using Storable with all its quirks, keeping their
cache files in
.git/svn/.caches/*.db
Installations with YAML peacefully coexist by keeping a separate set
of cache files in
.git/svn/.caches/*.yaml.
In most cases, switching between is a one-time thing, so it doesn't
seem worth the complication to migrate existing caches.
The upshot: after this patch, as long as YAML::Any is installed you
can move your git repository between machines with different perl
installations and "git svn fetch" will work fine. If you do not have
YAML::Any, the behavior is unchanged (and in particular does not get
any worse).
Reported-by: Sandro Weiser <sandro.weiser@informatik.tu-chemnitz.de> Reported-by: Bdale Garbee <bdale@gag.com> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Eric Wong <normalperson@yhbt.net>
This slices off another 600 or so lines from the frighteningly long
git-svn.perl script.
The Git::SVN::Ra interface is similar enough to SVN::Ra that it is
probably safe to ignore most of its implementation on first reading.
(Documenting or moving functions that do not fit that pattern is left
as an exercise to the interested reader.)
This makes the git-svn script shorter and less scary for beginners to
read through for the first time. Take the opportunity to explain the
purpose and basic interface of the Git::SVN::Editor class while at it.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Eric Wong <normalperson@yhbt.net>
Most of our documentation is in a single directory, so using
linkgit:git-config[1] just generates a relative link in the
same directory. However, this is not the case with the API
documentation in technical/*, which need to refer to
git-config from the parent directory.
We can fix this by passing a special prefix attribute when building
in a subdirectory, and respecting that prefix in our linkgit
definitions.
We only have to modify the html linkgit definition. For
manpages, we can ignore this for two reasons:
1. we do not generate actual links to the file in
manpages, but instead just give the name and section of
the linked manpage
2. we do not currently build manpages for subdirectories,
only html
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t1304 first runs setfacl as an experiment to see whether the
filesystem supports ACLs, and skips the remaining tests if
it does not. However, our setfacl run did not exercise the
ACLs very well, and some filesystems may support our initial
setfacl, but not the rest of the test.
In particular, some versions of ecryptfs will erroneously
apply the umask on top of an inherited directory ACL,
causing our tests to fail. Let's be more careful and make
sure both that we can read back the user ACL we set, and
that the inherited ACL is propagated correctly. The latter
catches the ecryptfs bug, but may also catch other bugs
(e.g., an implementation which does not handle inherited
ACLs at all).
Since we're making the setup more complex, let's move it
into its own test. This will hide the output for us unless
the user wants to run "-v" to see it (and we don't need to
bother printing anything about setfacl failing; the
remaining tests will properly print "skip" due to the
missing prerequisite).
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mm/api-credentials-doc:
api-credentials.txt: add "see also" section
api-credentials.txt: mention credential.helper explicitly
api-credentials.txt: show the big picture first
doc: fix xref link from api docs to manual pages
fmt-merge-msg: make attribution into comment lines
The submaintainer credit is not something you can compute purely by
looking at the history and its shape, especially in the presense of
fast-forward merges, and this observation makes the information on
the "via" line unreliable. Let's leave the final determination of
credits up to whoever is making the merge and show them as comments.
help: use HTML as the default help format on Windows
When 'git help $cmd' is run without a format option (e.g. -w), the
'man' format is always used. On some platforms, however, manual page
viewers are not often available.
Introduce DEFAULT_HELP_FORMAT make variable in order to allow the
default format configurable at compile time, and set it to HTML when
compiling on Windows (but not Cygwin).
Helped-by: Jeff King <peff@peff.net> Signed-off-by: Vincent van Ravesteijn <vfr@lyx.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
unpack-trees.c: use path_excluded() in check_ok_to_remove()
This function is responsible for determining if a path that is not
tracked is ignored and allow "checkout" to overwrite it as needed.
It used excluded() without checking if higher level directory in the
path is ignored; correct it to use path_excluded() for this check.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
---
* There are uses of lower-level interface excluded_from_list() in
the codepath for narrow-checkout hack; they are supposed to be
already checking each level as they descend, and are not touched
with this patch.
path_excluded(): update API to less cache-entry centric
It was stupid of me to make the API too much cache-entry specific;
the caller may want to check arbitrary pathname without having a
corresponding cache-entry to see if a path is ignored.
A bundle that records a complete history without prerequiste is a
useful way to sneakernet the sources of your configuration files
under your home directory, etc. E.g.
$ GIT_DIR=/srv/git/homesrc.git git bundle create x.bndl HEAD master
Running "git bundle verify" on such a "complete" bundle, however,
gives somewhat a funny output.
The name of the configuration variable was mentioned only at the very
end of the explanation, in a place specific to a specific rule, hence it
was not very clear what the specification was about.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The API documentation targets two kinds of developers: those using the
C API, and those writing remote-helpers. The document was not clear
about which part was useful to which category, and for example, the C API
could be mistakenly thought as an API for writting remote helpers.
Based-on-patch-by: Jeff King <peff@peff.net> Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-svn: platform auth providers are working only on 1.6.15 or newer
Matthijs Kooijman reports that the cut-off point 082afee (git-svn:
use platform specific auth providers, 2012-04-26) set at 1.6.12 to
use this feature safely was incorrect, and it is 1.6.15 instead:
http://svn.apache.org/repos/asf/subversion/trunk/CHANGES
Version 1.6.15
* improve some swig parameter mapping (r984565, r1035745)
Signed-off-by: Junio C Hamano <gitster@pobox.com> Acked-by: Eric Wong <normalperson@yhbt.net>
As we know a caller that does not recurse is calling us in the index
order, we can remember the last directory we found to be excluded
and see if the path we are looking at is still inside it, in which
case we can just answer that it is excluded.
ls-files -i: pay attention to exclusion of leading paths
"git ls-files --exclude=t/ -i" does not show paths in directory t/
that have been added to the index, but it should.
The excluded() API was designed for callers who walk the tree from
the top, checking each level of the directory hierarchy as it
descends if it is excluded, and not even bothering to recurse into
an excluded directory. This would allow us optimize for a common
case by not having to check if the exclude pattern "foo/" matches
when looking at "foo/bar", because the caller should have noticed
that "foo" is excluded and did not even bother to read "foo/bar"
out of opendir()/readdir() to call it.
The code for "ls-files -i" however walks the index linearly, feeding
paths without checking if the leading directory is already excluded.
Introduce a helper function path_excluded() to let this caller
properly call excluded() check for higher hierarchies as necessary.
Merge branch 'ef/maint-rebase-error-message' into maint
When "git rebase" was given a bad commit to replay the history on,
its error message did not correctly give the command line argument
it had trouble parsing.
By Erik Faye-Lund
* ef/maint-rebase-error-message:
rebase: report invalid commit correctly
This is basically a fancy way of saying "git/$GIT_VERSION",
except that it is overridable at build-time and through the
environment. Which means that people who don't want to
advertise their git version (for privacy or security
reasons) can tweak it.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The global git_version_string currently lives in git.c, but
doesn't have anything to do with the git wrapper. Let's move
it into its own file, where it will be more appropriate to
build more version-related functions.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
By Jiang Xin (4) and others
via Jiang Xin
* git://github.com/git-l10n/git-po:
l10n: Set nplurals of zh_CN.po from 1 to 2
l10n: zh_CN.po: translate 323 new messages
l10n: zh.CN.po: update by msgmerge git.pot
First release translation for Vietnamese
Init translation for Vietnamese
l10n: New it.po file with 504 translations
Update Swedish translation (728t0f0u)
l10n: Update git.pot (41 new messages)
"git grep -e '$pattern'", unlike the case where the patterns are read from
a file, did not treat individual lines in the given pattern argument as
separate regular expressions as it should.
By René Scharfe
* rs/maint-grep-F:
grep: stop leaking line strings with -f
grep: support newline separated pattern list
grep: factor out do_append_grep_pat()
grep: factor out create_grep_pat()
After tagging the tip of "dev" branch with a "for-linus" tag and
pushing both out, running
$ git request-pull $url $last_release dev
would produce an output asking the 'dev' branch of $url to be
pulled, because that is what the user asked the message to say.
We already detect this situation locally and include the contents of
the tag in the output; if the $url has that tag, favor that tag
(i.e. "for-linus") in the generated message over the branch name the
user gave us (i.e. "dev") from the command line, to make the output
look more consistent.
The 4th arg of "new mode (%o) of %s does not match old mode (%o)%s%s"
is blank string or string " of ". Even mark the string " of " for a
complete i18n, this message is still hard to translate right.
Split it into two slight different messages would make l10n teams happy.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
In most cases, plural-forms are unnecessary for Chinese. For example,
"apple" and "apples" are the same in Chinese, they are both translated
as "苹果". While there are exceptions, e.g., the plural form of "he",
"she" and "it" is "they" in English. In Chinese, "他(he)", "她(she)",
and "它(it)" have plural forms too, they are "他们", "她们", and "它们".
But what makes 'nplurals=1' hard to work right for Chinese is:
#: bundle.c:192
#, c-format
msgid "The bundle requires this ref"
msgid_plural "The bundle requires these %d refs"