fetch-pack: add specific error for fetching an unadvertised object
Enhance filter_refs (which decides whether a request for an unadvertised
object should be sent to the server) to record a new match status on the
"struct ref" when a request is not allowed, and have
report_unmatched_refs check for this status and print a special error
message, "Server does not allow request for unadvertised object".
Signed-off-by: Matt McCutchen <matt@mattmccutchen.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git fetch" currently doesn't bother to check that it got all refs it
sought, because the common case of requesting a nonexistent ref triggers
a die() in get_fetch_map. However, there's at least one case that
slipped through: "git fetch REMOTE SHA1" if the server doesn't allow
requests for unadvertised objects. Make fetch_refs_via_pack (which is
on the "git fetch" code path) call report_unmatched_refs so that we at
least get an error message in that case.
Signed-off-by: Matt McCutchen <matt@mattmccutchen.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
checkout: restrict @-expansions when finding branch
When we parse "git checkout $NAME", we try to interpret
$NAME as a local branch-name. If it is, then we point HEAD
to that branch. Otherwise, we detach the HEAD at whatever
commit $NAME points to.
We do the interpretation by calling strbuf_branchname(), and
then blindly sticking "refs/heads/" on the front. This leads
to nonsense results when expansions like "@{upstream}" or
"@" point to something besides a local branch. We end up
with a local branch name like "refs/heads/origin/master" or
"refs/heads/HEAD".
Normally this has no user-visible effect because those
branches don't exist, and so we fallback to feeding the
result to get_sha1(), which resolves them correctly.
But as the new test in t3204 shows, there are corner cases
where the effect is observable, and we check out the wrong
local branch rather than detaching to the correct one.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
strbuf_check_ref_format(): expand only local branches
This function asks strbuf_branchname() to expand any @-marks
in the branchname, and then we blindly stick refs/heads/ in
front of the result. This is obviously nonsense if the
expansion is "HEAD" or a ref in refs/remotes/.
The most obvious end-user effect is that creating or
renaming a branch with an expansion may have confusing
results (e.g., creating refs/heads/origin/master from
"@{upstream}" when the operation should be disallowed).
We can fix this by telling strbuf_branchname() that we are
only interested in local expansions. Any unexpanded bits are
then fed to check_ref_format(), which either disallows them
(in the case of "@{upstream}") or lets them through
("refs/heads/@" is technically valid, if a bit silly).
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
We use strbuf_branchname() to expand the branch name from
the command line, so you can delete the branch given by
@{-1}, for example. However, we allow other nonsense like
"@", and we do not respect our "-r" flag (so we may end up
deleting an oddly-named local ref instead of a remote one).
We can fix this by passing the appropriate "allowed" flag to
strbuf_branchname().
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-branch feeds the branch names from the command line to
strbuf_branchname(), but we do not yet tell that function
which kinds of expansions should be allowed. Let's create a
set of tests that cover both the allowed and disallowed
cases.
That shows off some breakages where we currently create or
delete the wrong ref (and will make sure that we do not
break any cases that _should_ be working when we do add more
restrictions).
Note that we check branch creation and deletion, but do not
bother with renames. Those follow the same code path as
creation.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
interpret_branch_name: allow callers to restrict expansions
The interpret_branch_name() function converts names like
@{-1} and @{upstream} into branch names. The expanded ref
names are not fully qualified, and may be outside of the
refs/heads/ namespace (e.g., "@" expands to "HEAD", and
"@{upstream}" is likely to be in "refs/remotes/").
This is OK for callers like dwim_ref() which are primarily
interested in resolving the resulting name, no matter where
it is. But callers like "git branch" treat the result as a
branch name in refs/heads/. When we expand to a ref outside
that namespace, the results are very confusing (e.g., "git
branch @" tries to create refs/heads/HEAD, which is
nonsense).
Callers can't know from the returned string how the
expansion happened (e.g., did the user really ask for a
branch named "HEAD", or did we do a bogus expansion?). One
fix would be to return some out-parameters describing the
types of expansion that occurred. This has the benefit that
the caller can generate precise error messages ("I
understood @{upstream} to mean origin/master, but that is a
remote tracking branch, so you cannot create it as a local
name").
However, out-parameters make the function interface somewhat
cumbersome. Instead, let's do the opposite: let the caller
tell us which elements to expand. That's easier to pass in,
and none of the callers give more precise error messages
than "@{upstream} isn't a valid branch name" anyway (which
should be sufficient).
The strbuf_branchname() function needs a similar parameter,
as most of the callers access interpret_branch_name()
through it.
We can break the callers down into two groups:
1. Callers that are happy with any kind of ref in the
result. We pass "0" here, so they continue to work
without restrictions. This includes merge_name(),
the reflog handling in add_pending_object_with_path(),
and substitute_branch_name(). This last is what powers
dwim_ref().
2. Callers that have funny corner cases (mostly in
git-branch and git-checkout). These need to make use of
the new parameter, but I've left them as "0" in this
patch, and will address them individually in follow-on
patches.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The return value from strbuf_branchname() is confusing and
useless: it's 0 if the whole name was consumed by an @-mark,
but otherwise is the length of the original name we fed.
No callers actually look at the return value, so let's just
get rid of it.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
interpret_branch_name: move docstring to header file
We generally put docstrings with function declarations,
because it's the callers who need to know how the function
works. Let's do so for interpret_branch_name().
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
interpret_branch_name(): handle auto-namelen for @{-1}
The interpret_branch_name() function takes a ptr/len pair
for the name, but you can pass "0" for "namelen", which will
cause it to check the length with strlen().
However, before we do that auto-namelen magic, we call
interpret_nth_prior_checkout(), which gets fed the bogus
"0". This was broken by 8cd4249c4 (interpret_branch_name:
always respect "namelen" parameter, 2014-01-15). Though to
be fair to that commit, it was broken in the _opposite_
direction before, where we would always treat "name" as a
string even if a length was passed.
You can see the bug with "git log -g @{-1}". That code path
always passes "0", and without this patch it cannot figure
out which branch's reflog to show.
We can fix it by a small reordering of the code.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
diff: do not short-cut CHECK_SIZE_ONLY check in diff_populate_filespec()
Callers of diff_populate_filespec() can choose to ask only for the
size of the blob without grabbing the blob data, and the function,
after running lstat() when the filespec points at a working tree
file, returns by copying the value in size field of the stat
structure into the size field of the filespec when this is the case.
However, this short-cut cannot be taken if the contents from the
path needs to go through convert_to_git(), whose resulting real blob
data may be different from what is in the working tree file.
As "git diff --quiet" compares the .size fields of filespec
structures to skip content comparison, this bug manifests as a
false "there are differences" for a file that needs eol conversion,
for example.
Reported-by: Mike Crowe <mac@mcrowe.com> Helped-by: Torsten Bögershausen <tboegi@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
add--interactive: fix missing file prompt for patch mode with "-i"
When invoked as "git add -i", each menu interactive menu
option prompts the user to select a list of files. This
includes the "patch" option, which gets the list before
starting the hunk-selection loop.
As "git add -p", it behaves differently, and jumps straight
to the hunk selection loop.
Since 0539d5e6d (i18n: add--interactive: mark patch prompt
for translation, 2016-12-14), the "add -i" case mistakenly
jumps to straight to the hunk-selection loop. Prior to that
commit the distinction between the two cases was managed by
the $patch_mode variable. That commit used $patch_mode for
something else, and moved the old meaning to the "$cmd"
variable. But it forgot to update the $patch_mode check
inside patch_update_cmd() which controls the file-list
behavior.
The simplest fix would be to change that line to check $cmd.
But while we're here, let's use a less obscure name for this
flag: $patch_mode_only, a boolean which tells whether we are
in full-interactive mode or only in patch-mode.
Reported-by: Henrik Grubbström <grubba@grubba.org> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add the email-style subject prefix (e.g. "Subject: [PATCH] ") directly
when it's needed instead of letting log_write_email_headers() prepare
it in a static buffer in advance. This simplifies storage ownership and
code flow.
Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
README: create HTTP/HTTPS links from URLs in Markdown
Markdown supports automatic links by surrounding URLs with
angle brackets, as documented in
<https://daringfireball.net/projects/markdown/syntax#autolink>
While we're at it, update URLs to avoid redirecting clients for
git-scm.com (by using HTTPS) and public-inbox.org (by adding a
trailing slash).
Signed-off-by: Eric Wong <e@80x24.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
gitweb tests: skip tests when we don't have Time::HiRes
Change the gitweb tests to skip when we can't load the Time::HiRes
module.
Gitweb needs this module to work. It has been in perl core since v5.8,
which is the oldest version we support. However CentOS (and perhaps
some other distributions) carve it into its own non-core-perl package
that's not installed along with /usr/bin/perl by default. Without this
we'll hard fail the gitweb tests when trying to load the module.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function will be used in a following commit to get the expiration
time of the shared index files from the config, and it is generic
enough to be put in "config.c".
Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a split-index file is created, let's update the mtime of the
shared index file that the split-index file is referencing.
In a following commit we will make shared index file expire
depending on their mtime, so updating the mtime makes sure that
the shared index file will not be deleted soon.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
When writing a new split-index and there is a big number of cache
entries in the split-index compared to the shared index, it is a
good idea to regenerate the shared index.
By default when the ratio reaches 20%, we will push back all
the entries from the split-index into a new shared index file
instead of just creating a new split-index file.
The threshold can be configured using the
"splitIndex.maxPercentChange" config variable.
We need to adjust the existing tests in t1700 by setting
"splitIndex.maxPercentChange" to 100 at the beginning of t1700,
as the existing tests are assuming that the shared index is
regenerated only when `git update-index --split-index` is used.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
update-index: warn in case of split-index incoherency
When users are using `git update-index --(no-)split-index`, they
may expect the split-index feature to be used or not according to
the option they just used, but this might not be the case if the
new "core.splitIndex" config variable has been set. In this case
let's warn about what will happen and why.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use a strbuf to store the subject prefix string and move its
construction into its own function. This gets rid of two arbitrary
length limits and allows the string to be added by callers directly.
Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that stash_push is used in the no verb form of stash, allow
specifying the command line for this form as well. Always use -- to
disambiguate pathspecs from other non-option arguments.
Also make git stash -p an alias for git stash push -p. This allows
users to use git stash -p <pathspec>.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that we have stash_push, which accepts pathspec arguments, use
it instead of stash_save in git stash without any additional verbs.
Previously we allowed git stash -- -message, which is no longer allowed
after this patch. Messages starting with a hyphen was allowed since 3c2eb80f, ("stash: simplify defaulting to "save" and reject unknown
options"). However it was never the intent to allow that, but rather it
was allowed accidentally.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
stash: teach 'push' (and 'create_stash') to honor pathspec
While working on a repository, it's often helpful to stash the changes
of a single or multiple files, and leave others alone. Unfortunately
git currently offers no such option. git stash -p can be used to work
around this, but it's often impractical when there are a lot of changes
over multiple files.
Allow 'git stash push' to take pathspec to specify which paths to stash.
Helped-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
submodule init: warn about falling back to a local path
When a submodule is initialized, the config variable 'submodule.<name>.url'
is set depending on the value of the same variable in the .gitmodules
file. When the URL indicates to be relative, then the url is computed
relative to its default remote. The default remote cannot be determined
accurately in all cases, such that it falls back to 'origin'.
The 'origin' remote may not exist, though. In that case we give up looking
for a suitable remote and we'll just assume it to be a local relative path.
This can be confusing to users as there is a lot of guessing involved,
which is not obvious to the user.
So in the corner case of assuming a local autoritative truth, warn the
user to lessen the confusion.
This behavior was introduced in 4d6893200 (submodule add: allow relative
repository path even when no url is set, 2011-06-06), which shared the
code with submodule-init and then ported to C in 3604242f080a (submodule:
port init from shell to C, 2016-04-15).
In case of submodule-add, this behavior makes sense in some use cases[1],
however for submodule-init there does not seem to be an immediate obvious
use case to fall back to a local submodule. However there might be, so
warn instead of die here.
While adding the warning, also clarify the behavior of relative URLs in
the documentation.
[1] e.g. http://stackoverflow.com/questions/8721984/git-ignore-files-for-public-repository-but-not-for-private
"store a secret locally in a submodule, with no intention to publish it"
Reported-by: Shawn Pearce <spearce@spearce.org> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The last call to the mkstemps() function was removed in commit 659488326
("wrapper.c: delete dead function git_mkstemps()", 22-04-2016). In order
to support platforms without mkstemps(), this functionality was provided,
along with a Makefile build variable (NO_MKSTEMPS), by the gitmkstemps()
function. Remove the dead code, along with the defunct build machinery.
Signed-off-by: Ramsay Jones <ramsay@ramsayjones.plus.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The last caller of git_mkstemp() was removed in commit 6fec0a89
("verify_signed_buffer: use tempfile object", 16-06-2016). Since
the introduction of the 'tempfile' APIs, along with git_mkstemp_mode,
it is unlikely that new callers will materialize. Remove the dead
code.
Signed-off-by: Ramsay Jones <ramsay@ramsayjones.plus.com> Reviewed-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
(that is to say, as long as the Git part of the path and the query
string is preserved in the final redirect destination, the intermediate
steps can have any URL). However, if one of the intermediate steps
results in an HTTP exception, a confusing "unable to update url base
from redirection" message is printed instead of a Curl error message
with the HTTP exception code.
This was introduced by 2 commits. Commit c93c92f ("http: update base
URLs when we see redirects", 2013-09-28) introduced a best-effort
optimization that required checking if only the "base" part of the URL
differed between the initial request and the final redirect destination,
but it performed the check before any HTTP status checking was done. If
something went wrong, the normal code path was still followed, so this
did not cause any confusing error messages until commit 6628eb4 ("http:
always update the base URL for redirects", 2016-12-06), which taught
http to die if the non-"base" part of the URL differed.
Therefore, teach http to check the HTTP status before attempting to
check if only the "base" part of the URL differed. This commit teaches
http_request_reauth to return early without updating options->base_url
upon an error; the only invoker of this function that passes a non-NULL
"options" is remote-curl.c (through "http_get_strbuf"), which only uses
options->base_url for an informational message in the situations that
this commit cares about (that is, when the return value is not HTTP_OK).
The included test checks that the redirect scheme at the beginning of
this commit message works, and that returning a 502 in the middle of the
redirect scheme produces the correct result. Note that this is different
from the test in commit 6628eb4 ("http: always update the base URL for
redirects", 2016-12-06) in that this commit tests that a Git-shaped URL
(http://.../info/refs?service=git-upload-pack) works, whereas commit 6628eb4 tests that a non-Git-shaped URL
(http://.../info/refs/foo?service=git-upload-pack) does not work (even
though Git is processing that URL) and is an error that is fatal, not
silently swallowed.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com> Acked-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
docs/diffcore: unquote "Complete Rewrites" in headers
The gitdiffcore documentation quotes the term "Complete Rewrites" in
headers for no real gain. This would make sense if the term could be
easily confused if not properly grouped together. But actually, the term
is quite obvious and thus does not really need any quoting, especially
regarding that it is not used anywhere else.
But more importanly, this brings up a bug when rendering man pages: when
trying to render quotes inside of a section header, we end up with
quotes which have been misaligned to the end of line. E.g.
diffcore-break: For Splitting Up Complete Rewrites
--------------------------------------------------
renders as
DIFFCORE-BREAK: FOR SPLITTING UP COMPLETE REWRITES""
, which is obviously wrong. While this is fixable for the man pages by
using double-quotes (e.g. ""COMPLETE REWRITES""), this again breaks it
for our generated HTML pages.
So fix the issue by simply dropping quotes inside of section headers,
which is currently only done for the term "Complete Rewrites".
Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git remote rm X", when a branch has remote X configured as the
value of its branch.*.remote, tried to remove branch.*.remote and
branch.*.merge and failed if either is unset.
* rl/remote-allow-missing-branch-name-merge:
remote: ignore failure to remove missing branch.<name>.merge
"git update-ref -d" and other operations to delete references did
not leave any entry in HEAD's reflog when the reference being
deleted was the current branch. This is not a problem in practice
because you do not want to delete the branch you are currently on,
but caused renaming of the current branch to something else not to
be logged in a useful way.
* km/delete-ref-reflog-message:
branch: record creation of renamed branch in HEAD's log
rename_ref: replace empty message in HEAD's log
update-ref: pass reflog message to delete_ref()
delete_ref: accept a reflog message argument
A caller of tempfile API that uses stdio interface to write to
files may ignore errors while writing, which is detected when
tempfile is closed (with a call to ferror()). By that time, the
original errno that may have told us what went wrong is likely to
be long gone and was overwritten by an irrelevant value.
close_tempfile() now resets errno to EIO to make errno at least
predictable.
* jk/tempfile-ferror-fclose-confusion:
tempfile: set errno to a known value before calling ferror()
The "--git-path", "--git-common-dir", and "--shared-index-path"
options of "git rev-parse" did not produce usable output. They are
now updated to show the path to the correct file, relative to where
the caller is.
* js/git-path-in-subdir:
rev-parse: fix several options when running in a subdirectory
rev-parse tests: add tests executed from a subdirectory
"git show-branch" expected there were only very short branch names
in the repository and used a fixed-length buffer to hold them
without checking for overflow.
* jk/show-branch-lift-name-len-limit:
show-branch: use skip_prefix to drop magic numbers
show-branch: store resolved head in heap buffer
show-branch: drop head_len variable
"git ls-remote" and "git archive --remote" are designed to work
without being in a directory under Git's control. However, recent
updates revealed that we randomly look into a directory called
.git/ without actually doing necessary set-up when working in a
repository. Stop doing so.
* jn/remote-helpers-with-git-dir:
remote helpers: avoid blind fall-back to ".git" when setting GIT_DIR
remote: avoid reading $GIT_DIR config in non-repo
The code to parse the command line "git grep <patterns>... <rev>
[[--] <pathspec>...]" has been cleaned up, and a handful of bugs
have been fixed (e.g. we used to check "--" if it is a rev).
* jk/grep-no-index-fix:
grep: treat revs the same for --untracked as for --no-index
grep: do not diagnose misspelt revs with --no-index
grep: avoid resolving revision names in --no-index case
grep: fix "--" rev/pathspec disambiguation
grep: re-order rev-parsing loop
grep: do not unnecessarily query repo for "--"
grep: move thread initialization a little lower
A "gc.log" file left by a backgrounded "gc --auto" disables further
automatic gc; it has been taught to run at least once a day (by
default) by ignoring a stale "gc.log" file that is too old.
* dt/gc-ignore-old-gc-logs:
gc: ignore old gc.log files
* mh/submodule-hash:
read_loose_refs(): read refs using resolve_ref_recursively()
files_ref_store::submodule: use NULL for the main repository
base_ref_store_init(): remove submodule argument
refs: push the submodule attribute down
refs: store submodule ref stores in a hashmap
register_ref_store(): new function
refs: remove some unnecessary handling of submodule == ""
refs: make some ref_store lookup functions private
refs: reorder some function definitions
The command line options for ssh invocation needs to be tweaked for
some implementations of SSH (e.g. PuTTY plink wants "-P <port>"
while OpenSSH wants "-p <port>" to specify port to connect to), and
the variant was guessed when GIT_SSH environment variable is used
to specify it. The logic to guess now applies to the command
specified by the newer GIT_SSH_COMMAND and also core.sshcommand
configuration variable, and comes with an escape hatch for users to
deal with misdetected cases.
* sf/putty-w-args:
connect.c: stop conflating ssh command names and overrides
connect: Add the envvar GIT_SSH_VARIANT and ssh.variant config
git_connect(): factor out SSH variant handling
connect: rename tortoiseplink and putty variables
connect: handle putty/plink also in GIT_SSH_COMMAND
The gitattributes machinery is being taught to work better in a
multi-threaded environment.
* bw/attr: (27 commits)
attr: reformat git_attr_set_direction() function
attr: push the bare repo check into read_attr()
attr: store attribute stack in attr_check structure
attr: tighten const correctness with git_attr and match_attr
attr: remove maybe-real, maybe-macro from git_attr
attr: eliminate global check_all_attr array
attr: use hashmap for attribute dictionary
attr: change validity check for attribute names to use positive logic
attr: pass struct attr_check to collect_some_attrs
attr: retire git_check_attrs() API
attr: convert git_check_attrs() callers to use the new API
attr: convert git_all_attrs() to use "struct attr_check"
attr: (re)introduce git_check_attr() and struct attr_check
attr: rename function and struct related to checking attributes
attr.c: outline the future plans by heavily commenting
Documentation: fix a typo
attr.c: add push_stack() helper
attr: support quoting pathname patterns in C style
attr.c: plug small leak in parse_attr_line()
attr.c: tighten constness around "git_attr" structure
...
Clean-up and updates to command line completion (in contrib/).
* sg/completion: (22 commits)
completion: restore removed line continuating backslash
completion: cache the path to the repository
completion: extract repository discovery from __gitdir()
completion: don't guard git executions with __gitdir()
completion: consolidate silencing errors from git commands
completion: don't use __gitdir() for git commands
completion: respect 'git -C <path>'
rev-parse: add '--absolute-git-dir' option
completion: fix completion after 'git -C <path>'
completion: don't offer commands when 'git --opt' needs an argument
completion: list short refs from a remote given as a URL
completion: don't list 'HEAD' when trying refs completion outside of a repo
completion: list refs from remote when remote's name matches a directory
completion: respect 'git --git-dir=<path>' when listing remote refs
completion: fix most spots not respecting 'git --git-dir=<path>'
completion: ensure that the repository path given on the command line exists
completion tests: add tests for the __git_refs() helper function
completion tests: check __gitdir()'s output in the error cases
completion tests: consolidate getting path of current working directory
completion tests: make the $cur variable local to the test helper functions
...
The "negative" pathspec feature was somewhat more cumbersome to use
than necessary in that its short-hand used "!" which needed to be
escaped from shells, and it required "exclude from what?" specified.
* lt/pathspec-negative:
pathspec: don't error out on all-exclusionary pathspec patterns
pathspec magic: add '^' as alias for '!'
"git tag" did not leave useful message when adding a new entry to
reflog; this was left unnoticed for a long time because refs/tags/*
doesn't keep reflog by default.
Optimizes resource usage while enumerating refs from alternate
object store, to help receiving end of "push" that hosts a
repository with many "forks".
* jk/alternate-ref-optim:
receive-pack: avoid duplicates between our refs and alternates
receive-pack: treat namespace .have lines like alternates
receive-pack: fix misleading namespace/.have comment
receive-pack: use oidset to de-duplicate .have lines
add oidset API
fetch-pack: cache results of for_each_alternate_ref
for_each_alternate_ref: replace transport code with for-each-ref
for_each_alternate_ref: pass name/oid instead of ref struct
for_each_alternate_ref: use strbuf for path allocation
for_each_alternate_ref: stop trimming trailing slashes
for_each_alternate_ref: handle failure from real_pathdup()
The code to list branches in "git branch" has been consolidated
with the more generic ref-filter API.
* kn/ref-filter-branch-list: (21 commits)
ref-filter: resurrect "strip" as a synonym to "lstrip"
branch: implement '--format' option
branch: use ref-filter printing APIs
branch, tag: use porcelain output
ref-filter: allow porcelain to translate messages in the output
ref-filter: add an 'rstrip=<N>' option to atoms which deal with refnames
ref-filter: modify the 'lstrip=<N>' option to work with negative '<N>'
ref-filter: Do not abruptly die when using the 'lstrip=<N>' option
ref-filter: rename the 'strip' option to 'lstrip'
ref-filter: make remote_ref_atom_parser() use refname_atom_parser_internal()
ref-filter: introduce refname_atom_parser()
ref-filter: introduce refname_atom_parser_internal()
ref-filter: make "%(symref)" atom work with the ':short' modifier
ref-filter: add support for %(upstream:track,nobracket)
ref-filter: make %(upstream:track) prints "[gone]" for invalid upstreams
ref-filter: introduce format_ref_array_item()
ref-filter: move get_head_description() from branch.c
ref-filter: modify "%(objectname:short)" to take length
ref-filter: implement %(if:equals=<string>) and %(if:notequals=<string>)
ref-filter: include reference to 'used_atom' within 'atom_value'
...
The <url> part in "http.<url>.<variable>" configuration variable
can now be spelled with '*' that serves as wildcard.
E.g. "http.https://*.example.com.proxy" can be used to specify the
proxy used for https://a.example.com, https://b.example.com, etc.,
i.e. any host in the example.com domain.
* ps/urlmatch-wildcard:
urlmatch: allow globbing for the URL host part
urlmatch: include host in urlmatch ranking
urlmatch: split host and port fields in `struct url_info`
urlmatch: enable normalization of URLs with globs
mailmap: add Patrick Steinhardt's work address
When "git merge" detects a path that is renamed in one history
while the other history deleted (or modified) it, it now reports
both paths to help the user understand what is going on in the two
histories being merged.
* mm/merge-rename-delete-message:
merge-recursive: make "CONFLICT (rename/delete)" message show both paths
Deletion of a branch "foo/bar" could remove .git/refs/heads/foo
once there no longer is any other branch whose name begins with
"foo/", but we didn't do so so far. Now we do.
* mh/ref-remove-empty-directory: (23 commits)
files_transaction_commit(): clean up empty directories
try_remove_empty_parents(): teach to remove parents of reflogs, too
try_remove_empty_parents(): don't trash argument contents
try_remove_empty_parents(): rename parameter "name" -> "refname"
delete_ref_loose(): inline function
delete_ref_loose(): derive loose reference path from lock
log_ref_write_1(): inline function
log_ref_setup(): manage the name of the reflog file internally
log_ref_write_1(): don't depend on logfile argument
log_ref_setup(): pass the open file descriptor back to the caller
log_ref_setup(): improve robustness against races
log_ref_setup(): separate code for create vs non-create
log_ref_write(): inline function
rename_tmp_log(): improve error reporting
rename_tmp_log(): use raceproof_create_file()
lock_ref_sha1_basic(): use raceproof_create_file()
lock_ref_sha1_basic(): inline constant
raceproof_create_file(): new function
safe_create_leading_directories(): set errno on SCLD_EXISTS
safe_create_leading_directories_const(): preserve errno
...
"git describe" and "git name-rev" have been taught to take more
than one refname patterns to restrict the set of refs to base their
naming output on, and also learned to take negative patterns to
name refs not to be used for naming via their "--exclude" option.
* jk/describe-omit-some-refs:
describe: teach describe negative pattern matches
describe: teach --match to accept multiple patterns
name-rev: add support to exclude refs by pattern match
name-rev: extend --refs to accept multiple patterns
doc: add documentation for OPT_STRING_LIST
cvs tests: skip tests that call "cvs commit" when running as root
Change the tests that fail to when we run the test suite as root, due
to calling "cvs commit".
The GNU cvs package has an optional compile-time CVS_BADROOT
flag. When compiled with this flag "cvs commit" will refuse to commit
anything as root. On my Debian box this isn't compiled in[1] in, but
on CentOS it is.
I've run all the t/t*cvs*.sh tests, and these are the only two that
fail. For some reason e.g. t9402-git-cvsserver-refs.sh still works as
root despite doing "cvs commit", I haven't dug into why.
This commit is technically being overzealous, we could do better by
making a mock cvs commit as root and run the tests if that works, but
I don't see any compelling reason to bend over backwards to run these
tests in all cases, just skipping them as root seems good enough.
1. Per: strings /usr/bin/cvs|grep 'is not allowed to commit'
Using cvs 1.11.23 on CentOS, 1.12.13-MirDebian-18 on Debian.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
In one test, we use "git checkout --orphan HEAD" to create
an unborn branch. Confusingly, the resulting branch is named
"refs/heads/HEAD". The original probably meant something
like:
git checkout --orphan orphaned-branch HEAD
Let's just use "orphaned-branch" here to make this less
confusing. Putting HEAD in the second argument is already
implied.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
commit: don't check for space twice when looking for header
Both standard_header_field() and excluded_header_field() check if
there's a space after the buffer that's handed to them. We already
check in the caller if that space is present. Don't bother calling
the functions if it's missing, as they are guaranteed to return 0 in
that case, and remove the now redundant checks from them.
Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
commit: be more precise when searching for headers
Search for a space character only within the current line in
read_commit_extra_header_lines() instead of searching in the whole
buffer (and possibly beyond, if it's not NUL-terminated) and then
discarding any results after the end of the current line.
Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a function for appending the canonized absolute pathname of a given
path to a strbuf. It keeps the existing contents intact, as expected of
a function of the strbuf_add() family, while avoiding copying the result
if the given strbuf is empty. It's more consistent with the rest of the
strbuf API than strbuf_realpath(), which it's wrapping.
Also add a semantic patch demonstrating its intended usage and apply it
to the current tree. Using strbuf_add_real_path() instead of calling
strbuf_addstr() and real_path() avoids an extra copy to a static buffer.
Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a semantic patch for using ALLOC_ARRAY to allocate arrays and apply
the transformation on the current source tree. The macro checks for
multiplication overflow and infers the element size automatically; the
result is shorter and safer code.
Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
sha1_file: release fallback base's memory in unpack_entry()
If a pack entry that's used as a delta base is corrupt, unpack_entry()
marks it as unusable and then searches the object again in the hope that
it can be found in another pack or in a loose file. The memory for this
external base object is never released. Free it after use.
Signed-off-by: Rene Scharfe <l.s.r@web.de> Reviewed-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
This variable needs to be specified to make some types of
non-basic authentication work, but ideally this would just
work out of the box for everyone.
However, simply setting it to "1" by default introduces an
extra round-trip for cases where it _isn't_ useful. We end
up sending a bogus empty credential that the server rejects.
Instead, let's introduce an automatic mode, that works like
this:
1. We won't try to send the bogus credential on the first
request. We'll wait to get an HTTP 401, as usual.
2. After seeing an HTTP 401, the empty-auth hack will kick
in only when we know there is an auth method available
that might make use of it (i.e., something besides
"Basic" or "Digest").
That should make it work out of the box, without incurring
any extra round-trips for people hitting Basic-only servers.
This _does_ incur an extra round-trip if you really want to
use "Basic" but your server advertises other methods (the
emptyauth hack will kick in but fail, and then Git will
actually ask for a password).
The auto mode may incur an extra round-trip over setting
http.emptyauth=true, because part of the emptyauth hack is
to feed this blank password to curl even before we've made a
single request.
Helped-by: Johannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Adding comments after a tag in the body is a common practise (e.g. in
the Linux kernel) and git-send-email has been supporting this for years
by removing any trailing cruft after the address.
After some recent changes, any trailing comment is now instead appended
to the recipient name (with some random white space inserted) resulting
in undesirable noise in the headers, for example:
CC: "# 3 . 3 . x : 1b9508f : sched : Rate-limit newidle" <stable@vger.kernel.org>
Revert to the earlier behaviour of discarding anything after the (first)
address in a tag while parsing the body.
Note that multiple addresses after are still allowed after a command
line switch (and in a CC header field).
Also note that --suppress-cc=self was never honoured when using multiple
addresses in a tag.
Signed-off-by: Johan Hovold <johan@kernel.org> Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The parse_config_key() function was introduced to make it
easier to match "section.subsection.key" variables. It also
handles the simpler "section.key", and the caller is
responsible for distinguishing the two from its
out-parameters.
Most callers who _only_ want "section.key" would just use a
strcmp(var, "section.key"), since there is no parsing
required. However, they may still use parse_config_key() if
their "section" variable isn't a constant (an example of
this is in parse_hide_refs_config).
Using the parse_config_key is a bit clunky, though:
const char *subsection;
int subsection_len;
const char *key;
parse_config_key: use skip_prefix instead of starts_with
This saves us having to repeatedly add in "section_len" (and
also avoids walking over the first part of the string
multiple times for a strlen() and strrchr()).
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
refs: parse_hide_refs_config to use parse_config_key
parse_config_key was introduced in 1b86bbb0ade (config: add helper
function for parsing key names, 2013-01-22), the NEEDSWORK that is removed
in this patch was introduced at daebaa7813 (upload/receive-pack: allow
hiding ref hierarchies, 2013-01-18), which is only a couple days apart,
so presumably the code replaced in this patch was only introduced due
to not wanting to wait on the proper helper function being available.
Make the condition easier to read by using parse_config_key.
Signed-off-by: Stefan Beller <sbeller@google.com> Reviewed-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
docs/git-gc: fix default value for `--aggressiveDepth`
In commit 07e7dbf0d (gc: default aggressive depth to 50, 2016-08-11),
the default aggressive depth of git-gc has been changed to 50. While
git-config(1) has been updated to represent the new default value,
git-gc(1) still mentions the old value. This patch fixes it.
Signed-off-by: Patrick Steinhardt <ps@pks.im> Reviewed-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
config: use git_config_parse_key() in git_config_parse_parameter()
The parsing of one-shot assignments of configuration variables that
come from the command line historically was quite loose and allowed
anything to pass. It also downcased everything in the variable name,
even a three-level <section>.<subsection>.<variable> name in which
the <subsection> part must be treated in a case sensitive manner.
Existing git_config_parse_key() helper is used to parse the variable
name that comes from the command line, i.e. "git config VAR VAL",
and handles these details correctly. Replace the strbuf_tolower()
call in git_config_parse_parameter() with a call to it to correct
both issues. git_config_parse_key() does a bit more things that are
not necessary for the purpose of this codepath (e.g. it allocates a
separate buffer to return the canonicalized variable name because it
takes a "const char *" input), but we are not in a performance-critical
codepath here.
git_config_parse_key() implements the validation and downcasing of
<section> and <variable> in "<section>[.<subsection>].<variable>"
configuration variable name. Move it (and helpers it uses) a bit up
so that it can be used by git_config_parse_parameter(), which is
used to check configuration settings that are given on the command
line (i.e. "git -c VAR=VAL cmd"), in a later patch.
When we read user.name and user.email from a config file,
they go into strbufs. When a caller asks ident_default_name()
for the value, we fallback to auto-detecting if the strbuf
is empty.
That means that explicitly setting an empty string in the
config is identical to not setting it at all. This is
potentially confusing, as we usually accept a configured
value as the final value.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
An ident name consisting of only "crud" characters (like
whitespace or punctuation) is effectively the same as an
empty one, because our strbuf_addstr_without_crud() will
remove those characters.
We reject an empty name when formatting a strict ident, but
don't notice an all-crud one because our check happens
before the crud-removal step.
We could skip past the crud before checking for an empty
name, but let's make it a separate code path, for two
reasons. One is that we can give a more specific error
message. And two is that unlike a blank name, we probably
don't want to kick in the fallback-to-username behavior.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
ident: handle NULL email when complaining of empty name
If we see an empty name, we complain about and mention the
matching email in the error message (to give it some
context). However, the "email" pointer may be NULL here if
we were planning to fill it in later from ident_default_email().
This was broken by 59f929596 (fmt_ident: refactor strictness
checks, 2016-02-04). Prior to that commit, we would look up
the default name and email before doing any other actions.
So one solution would be to go back to that.
However, we can't just do so blindly. The logic for handling
the "!email" condition has grown since then. In particular,
looking up the default email can die if getpwuid() fails,
but there are other errors that should take precedence.
Commit 734c7789a (ident: check for useConfigOnly before
auto-detection of name/email, 2016-03-30) reordered the
checks so that we prefer the error message for
useConfigOnly.
Instead, we can observe that while the name-handling depends
on "email" being set, the reverse is not true. So we can
simply set up the email variable first.
This does mean that if both are bogus, we'll complain about
the email before the name. But between the two, there is no
reason to prefer one over the other.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>