RelNotes 2.18: minor fix to entry about dynamically loading completions
It was not "newer versions of bash" but newer versions of
bash-completion that made commit 085e2ee0e6 (completion: load
completion file for external subcommand, 2018-04-29) both necessary
and possible.
Update the corresponding RelNotes entry accordingly.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
"index-pack --strict" has been taught to make sure that it runs the
final object integrity checks after making the freshly indexed
packfile available to itself.
* jk/index-pack-maint:
index-pack: correct install_packed_git() args
index-pack: handle --strict checks of non-repo packs
prepare_commit_graft: treat non-repository as a noop
RelNotes 2.18: clarify where directory rename detection applies
Mention that this feature works with some commands (merge and cherry-pick,
implying that it also works with commands that build on these like rebase
-m and rebase -i). Explicitly mentioning two commands hopefully implies
that it may not always work with other commands (am, and rebase without
flags that imply either -m or -i).
Also, since the directory rename detection from this cycle was
specifically added in merge-recursive and not diffcore-rename, remove the
'in "diff" family" phrase from the note. (Folks have requested in the
past that `git diff` detect directory renames and somehow simplify its
output, so it may be helpful to avoid implying that diff has any new
capability here.)
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
completion: correct zsh detection when run from git-completion.zsh
v2.18.0-rc0~90^2 (completion: reduce overhead of clearing cached
--options, 2018-04-18) worked around a bug in bash's "set" builtin on
MacOS by using compgen instead. It was careful to avoid breaking zsh
by guarding this workaround with
if [[ -n ${ZSH_VERSION-}} ]]
Alas, this interacts poorly with git-completion.zsh's bash emulation:
ZSH_VERSION='' . "$script"
Correct it by instead using a new GIT_SOURCING_ZSH_COMPLETION shell
variable to detect whether git-completion.bash is being sourced from
git-completion.zsh. This way, the zsh variant is used both when run
from zsh directly and when run via git-completion.zsh.
Reproduction recipe:
1. cd git/contrib/completion && cp git-completion.zsh _git
2. Put the following in a new ~/.zshrc file:
With this patch:
Triggers nice git-completion.bash based tab completion
Without:
contrib/completion/git-completion.bash:354: read-only variable: QISUFFIX
zsh:12: command not found: ___main
zsh:15: _default: function definition file not found
_dispatch:70: bad math expression: operand expected at `/usr/bin/g...'
Segmentation fault
Reported-by: Rick van Hattem <wolph@wol.ph> Reported-by: Dave Borowitz <dborowitz@google.com> Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function does not start taking the repository object as a
parameter before v2.18 track. Make the topic mergeable to v2.17
maintenance track by dropping it.
Commit 159e7b080b (fsck: detect gitmodules files,
2018-05-02) taught fsck to look at the content of
.gitmodules files. If the object turns out not to be a blob
at all, we just complain and punt on checking the content.
And since this was such an obvious and trivial code path, I
didn't even bother to add a test.
Except it _does_ do one non-trivial thing, which is call the
report() function, which wants us to pass a pointer to a
"struct object". Which we don't have (we have only a "struct
object_id"). So we erroneously pass a NULL object to
report(), which gets dereferenced and causes a segfault.
It seems like we could refactor report() to just take the
object_id itself. But we pass the object pointer along to
a callback function, and indeed this ends up in
builtin/fsck.c's objreport() which does want to look at
other parts of the object (like the type).
So instead, let's just use lookup_unknown_object() to get
the real "struct object", and pass that.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t7415: don't bother creating commit for symlink test
Early versions of the fsck .gitmodules detection code
actually required a tree to be at the root of a commit for
it to be checked for .gitmodules. What we ended up with in 159e7b080b (fsck: detect gitmodules files, 2018-05-02),
though, finds a .gitmodules file in _any_ tree (see that
commit for more discussion).
As a result, there's no need to create a commit in our
tests. Let's drop it in the name of simplicity. And since
that was the only thing referencing $tree, we can pull our
tree creation out of a command substitution.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git pull -recurse-submodules --rebase", when the submodule
repository's history did not have anything common between ours and
the upstream's, failed to execute. We need to fetch from them to
continue even in such a case.
* jt/submodule-pull-recurse-rebase:
submodule: do not pass null OID to setup_revisions
fetch: do not pass ref-prefixes for fetch by exact SHA1
When v2.18.0-rc0~10^2~1 (refspec: consolidate ref-prefix generation
logic, 2018-05-16) factored out the ref-prefix generation code for
reuse, it left out the 'if (!item->exact_sha1)' test in the original
ref-prefix generation code. As a result, fetches by SHA-1 generate
ref-prefixes as though the SHA-1 being fetched were an abbreviated ref
name:
If there is another ref name on the command line or the object being
fetched is already available locally, then that's mostly harmless.
But otherwise, we error out with
fatal: no matching remote head
since the server did not send any refs we are interested in. Filter
out the exact_sha1 refspecs to avoid this.
This patch adds a test to check this behavior that notices another
behavior difference between protocol v0 and v2 in the process. Add a
NEEDSWORK comment to clear it up.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Quite a many tests assumed that newly created refs are made as
loose refs using the files backend, which have been updated to use
proper plumbing like rev-parse and update-ref, to avoid breakage
once we start using different ref backends.
* cc/tests-without-assuming-ref-files-backend:
t990X: use '.git/objects' as 'deep inside .git' path
t: make many tests depend less on the refs being files
The list of commands with their various attributes were spread
across a few places in the build procedure, but it now is getting a
bit more consolidated to allow more automation.
* nd/command-list:
completion: allow to customize the completable command list
completion: add and use --list-cmds=alias
completion: add and use --list-cmds=nohelpers
Move declaration for alias.c to alias.h
completion: reduce completable command list
completion: let git provide the completable command list
command-list.txt: documentation and guide line
help: use command-list.txt for the source of guides
help: add "-a --verbose" to list all commands with synopsis
git: support --list-cmds=list-<category>
completion: implement and use --list-cmds=main,others
git --list-cmds: collect command list in a string_list
git.c: convert --list-* to --list-cmds=*
Remove common-cmds.h
help: use command-list.h for common command list
generate-cmds.sh: export all commands to command-list.h
generate-cmds.sh: factor out synopsis extract code
index-pack: handle --strict checks of non-repo packs
Commit 73c3f0f704 (index-pack: check .gitmodules files with
--strict, 2018-05-04) added a call to add_packed_git(), with
the intent that the newly-indexed objects would be available
to the process when we run fsck_finish(). But that's not
what add_packed_git() does. It only allocates the struct,
and you must install_packed_git() on the result. So that
call was effectively doing nothing (except leaking a
struct).
But wait, we passed all of the tests! Does that mean we
don't need the call at all?
For normal cases, no. When we run "index-pack --stdin"
inside a repository, we write the new pack into the object
directory. If fsck_finish() needs to access one of the new
objects, then our initial lookup will fail to find it, but
we'll follow up by running reprepare_packed_git() and
looking again. That logic was meant to handle somebody else
repacking simultaneously, but it ends up working for us
here.
But there is a case that does need this, that we were not
testing. You can run "git index-pack foo.pack" on any file,
even when it is not inside the object directory. Or you may
not even be in a repository at all! This case fails without
doing the proper install_packed_git() call.
We can make this work by adding the install call.
Note that we should be prepared to handle add_packed_git()
failing. We can just silently ignore this case, though. If
fsck_finish() later needs the objects and they're not
available, it will complain itself. And if it doesn't
(because we were able to resolve the whole fsck in the first
pass), then it actually isn't an interesting error at all.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
prepare_commit_graft: treat non-repository as a noop
The parse_commit_buffer() function consults lookup_commit_graft()
to see if we need to rewrite parents. The latter will look
at $GIT_DIR/info/grafts. If you're outside of a repository,
then this will trigger a BUG() as of b1ef400eec (setup_git_env:
avoid blind fall-back to ".git", 2016-10-20).
It's probably uncommon to actually parse a commit outside of
a repository, but you can see it in action with:
cd /not/a/git/repo
git index-pack --strict /some/file.pack
This works fine without --strict, but the fsck checks will
try to parse any commits, triggering the BUG(). We can fix
that by teaching the graft code to behave as if there are no
grafts when we aren't in a repository.
Arguably index-pack (and fsck) are wrong to consider grafts
at all. So another solution is to disable grafts entirely
for those commands. But given that the graft feature is
deprecated anyway, it's not worth even thinking through the
ramifications that might have.
There is one other corner case I considered here. What
should:
cd /not/a/git/repo
export GIT_GRAFT_FILE=/file/with/grafts
git index-pack --strict /some/file.pack
do? We don't have a repository, but the user has pointed us
directly at a graft file, which we could respect. I believe
this case did work that way prior to b1ef400eec. However,
fixing it now would be pretty invasive. Back then we would
just call into setup_git_env() even without a repository.
But these days it actually takes a git_dir argument. So
there would be a fair bit of refactoring of the setup code
involved.
Given the obscurity of this case, plus the fact that grafts
are deprecated and probably shouldn't work under index-pack
anyway, it's not worth pursuing further. This patch at least
un-breaks the common case where you're _not_ using grafts,
but we BUG() anyway trying to even find that out.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
refspec-api: avoid uninitialized field in refspec item
When parse_refspec() function was created at 3eec3700 ("refspec:
factor out parsing a single refspec", 2018-05-16) to take a caller
supplied piece of memory to fill parsed refspec_item, it forgot that
a refspec without colon must set item->dst to NULL to let the users
of refspec know that the result of the fetch does not get stored in
an ref on our side.
remote.txt: update documentation for 'update' command
Commit b344e1614b (git remote update: Fallback to remote if group does
not exist - 2009-04-06) lets "git remote update" accept individual
remotes as well. Previously this command only accepted remote
groups. The commit updates the command syntax but not the actual
document of this subcommand. Update it.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the 2.18 cycle, directory rename detection was merged, then reverted,
then reworked in such a way to fix another prominent bug in addition to
the original problem causing it to be reverted. When the reworked series
was merged, we ended up with two nearly duplicate release notes. Remove
the second copy, but preserve the information about the extra bug fix.
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a mention of the security mailing list to the README, and to
Documentation/SubmittingPatches.. 2caa7b8d27 ("git manpage: note
git-security@googlegroups.com", 2018-03-08) already added it to the
man page, but for developers either the README, or the documentation
on how to contribute (SubmittingPatches) may be the first place to
look.
Use the same wording as we already have on the git-scm.com website and
in the man page for the README, while the wording is adjusted in
SubmittingPatches to match the surrounding document better.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
SubmittingPatches: replace numbered attributes with names
Use names instead of numbers for the AsciiDoc attributes that are used
for the footnotes. We will add more footnotes in subsequent commits,
and attributes should ideally all be unique. Having named attributes
will help ensure uniqueness, and we won't have to re-number the
attributes if we add a footnote earlier in the document.
In addition it also clarifies that the attribute name/number is not
related to the number the footnote will get in the output.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Our HTTP client code used to advertise that we accept gzip encoding
from the other side; instead, just let cURL library to advertise
and negotiate the best one.
* bw/remote-curl-compressed-responses:
remote-curl: accept compressed responses with protocol v2
remote-curl: accept all encodings supported by curl
* ma/unpack-trees-free-msgs:
unpack_trees_options: free messages when done
argv-array: return the pushed string from argv_push*()
merge-recursive: provide pair of `unpack_trees_{start,finish}()`
merge: setup `opts` later in `checkout_fast_forward()`
Many tests hardcode the raw object names, which would change once
we migrate away from SHA-1. While some of them must test against
exact object names, most of them do not have to use hardcoded
constants in the test. The latter kind of tests have been updated
to test the moral equivalent of the original without hardcoding the
actual object names.
Avoid unchecked snprintf() to make future code auditing easier.
* jk/snprintf-truncation:
fmt_with_err: add a comment that truncation is OK
shorten_unambiguous_ref: use xsnprintf
fsmonitor: use internal argv_array of struct child_process
log_write_email_headers: use strbufs
http: use strbufs instead of fixed buffers
By code restructuring of submodule merge in merge-recursive,
informational messages from the codepath are now given using the
same mechanism as other output, and honor the merge.verbosity
configuration. The code also learned to give a few new messages
when a submodule three-way merge resolves cleanly when one side
records a descendant of the commit chosen by the other side.
* sb/submodule-merge-in-merge-recursive:
merge-recursive: give notice when submodule commit gets fast-forwarded
merge-recursive: i18n submodule merge output and respect verbosity
submodule.c: move submodule merging to merge-recursive.c
"git fetch $there $refspec" that talks over protocol v2 can take
advantage of server-side ref filtering; the code has been extended
so that this mechanism triggers also when fetching with configured
refspec.
* bw/ref-prefix-for-configured-refspec: (38 commits)
fetch: generate ref-prefixes when using a configured refspec
refspec: consolidate ref-prefix generation logic
submodule: convert push_unpushed_submodules to take a struct refspec
remote: convert check_push_refs to take a struct refspec
remote: convert match_push_refs to take a struct refspec
http-push: store refspecs in a struct refspec
transport: remove transport_verify_remote_names
send-pack: store refspecs in a struct refspec
transport: convert transport_push to take a struct refspec
push: convert to use struct refspec
push: check for errors earlier
remote: convert match_explicit_refs to take a struct refspec
remote: convert get_ref_match to take a struct refspec
remote: convert query_refspecs to take a struct refspec
remote: convert apply_refspecs to take a struct refspec
remote: convert get_stale_heads to take a struct refspec
fetch: convert prune_refs to take a struct refspec
fetch: convert get_ref_map to take a struct refspec
fetch: convert do_fetch to take a struct refspec
refspec: remove the deprecated functions
...
Error behaviour of "git grep" when it cannot read the index was
inconsistent with other commands that uses the index, which has
been corrected to error out early.
* sb/grep-die-on-unreadable-index:
grep: handle corrupt index files early
"git submodule update" attempts two different kinds of "git fetch"
against the upstream repository to grab a commit bound at the
submodule's path, but it incorrectly gave up if the first kind
(i.e. a normal fetch) failed, making the second "last resort" one
(i.e. fetching an exact commit object by object name) ineffective.
This has been corrected.
* sb/submodule-update-try-harder:
git-submodule.sh: try harder to fetch a submodule
When a short hexadecimal string is used to name an object but there
are multiple objects that share the string as the prefix of their
names, the code lists these ambiguous candidates in a help message.
These object names are now sorted according to their types for
easier eyeballing.
* ab/get-short-oid:
get_short_oid: sort ambiguous objects by type, then SHA-1
sha1-name.c: move around the collect_ambiguous() function
git-p4: change "commitish" typo to "committish"
sha1-array.h: align function arguments
sha1-name.c: remove stray newline
Conversion from uchar[20] to struct object_id continues.
* bc/object-id: (42 commits)
merge-one-file: compute empty blob object ID
add--interactive: compute the empty tree value
Update shell scripts to compute empty tree object ID
sha1_file: only expose empty object constants through git_hash_algo
dir: use the_hash_algo for empty blob object ID
sequencer: use the_hash_algo for empty tree object ID
cache-tree: use is_empty_tree_oid
sha1_file: convert cached object code to struct object_id
builtin/reset: convert use of EMPTY_TREE_SHA1_BIN
builtin/receive-pack: convert one use of EMPTY_TREE_SHA1_HEX
wt-status: convert two uses of EMPTY_TREE_SHA1_HEX
submodule: convert several uses of EMPTY_TREE_SHA1_HEX
sequencer: convert one use of EMPTY_TREE_SHA1_HEX
merge: convert empty tree constant to the_hash_algo
builtin/merge: switch tree functions to use object_id
builtin/am: convert uses of EMPTY_TREE_SHA1_BIN to the_hash_algo
sha1-file: add functions for hex empty tree and blob OIDs
builtin/receive-pack: avoid hard-coded constants for push certs
diff: specify abbreviation size in terms of the_hash_algo
upload-pack: replace use of several hard-coded constants
...
"git blame" learns to unhighlight uninteresting metadata from the
originating commit on lines that are the same as the previous one,
and also paint lines in different colors depending on the age of
the commit.
* sb/blame-color:
builtin/blame: add new coloring scheme config
builtin/blame: highlight recently changed lines
builtin/blame: dim uninteresting metadata lines
"git submodule update" and "git submodule add" supported the
"--reference" option to borrow objects from a neighbouring local
repository like "git clone" does, but lacked the more recent
invention "--dissociate". Also "git submodule add" has been taught
to take the "--progress" option.
* cf/submodule-progress-dissociate:
submodule: add --dissociate option to add/update commands
submodule: add --progress option to add command
submodule: clean up substitutions in script
Command line completion (in contrib/) learned to complete pathnames
for various commands better.
* sg/complete-paths:
t9902-completion: exercise __git_complete_index_file() directly
completion: don't return with error from __gitcomp_file_direct()
completion: fill COMPREPLY directly when completing paths
completion: improve handling quoted paths in 'git ls-files's output
completion: remove repeated dirnames with 'awk' during path completion
t9902-completion: ignore COMPREPLY element order in some tests
completion: use 'awk' to strip trailing path components
completion: let 'ls-files' and 'diff-index' filter matching paths
completion: improve handling quoted paths on the command line
completion: support completing non-ASCII pathnames
completion: simplify prefix path component handling during path completion
completion: move __git_complete_index_file() next to its helpers
t9902-completion: add tests demonstrating issues with quoted pathnames
"git update-ref A B" is supposed to ensure that ref A does not yet
exist when B is a NULL OID, but this check was not done correctly
for pseudo-refs outside refs/ hierarchy, e.g. MERGE_HEAD.
* ma/create-pseudoref-with-null-old-oid:
refs: handle zero oid for pseudorefs
t1400: add tests around adding/deleting pseudorefs
refs.c: refer to "object ID", not "sha1", in error messages
Code clean-up to turn history traversal more robust in a
semi-corrupt repository.
* jk/unavailable-can-be-missing:
mark_parents_uninteresting(): avoid most allocation
mark_parents_uninteresting(): replace list with stack
mark_parents_uninteresting(): drop missing object check
mark_tree_contents_uninteresting(): drop missing object check
"git status" learned to honor a new status.renames configuration to
skip rename detection, which could be useful for those who want to
do so without disabling the default rename detection done by the
"git diff" command.
* bp/status-rename-config:
add status config and command line options for rename detection
Developer support update, by using BUG() macro instead of die() to
mark codepaths that should not happen more clearly.
* js/use-bug-macro:
BUG_exit_code: fix sparse "symbol not declared" warning
Convert remaining die*(BUG) messages
Replace all die("BUG: ...") calls by BUG() ones
run-command: use BUG() to report bugs, not die()
test-tool: help verifying BUG() code paths
Code clean-up to adjust to a more recent lockfile API convention that
allows lockfile instances kept on the stack.
* ma/lockfile-cleanup:
lock_file: move static locks into functions
lock_file: make function-local locks non-static
refs.c: do not die if locking fails in `delete_pseudoref()`
refs.c: do not die if locking fails in `write_pseudoref()`
t/helper/test-write-cache: clean up lock-handling
With merge.renames configuration set to false, the recursive merge
strategy can be told not to spend cycles trying to find renamed
paths and merge them accordingly.
* bp/merge-rename-config:
merge: pass aggressive when rename detection is turned off
merge: add merge.renames config setting
merge: update documentation for {merge,diff}.renameLimit
The implementation of "git rebase -i --root" has been updated to use
the sequencer machinery more.
* js/sequencer-and-root-commits:
rebase --rebase-merges: root commits can be cousins, too
rebase --rebase-merges: a "merge" into a new root is a fast-forward
sequencer: allow introducing new root commits
rebase -i --root: let the sequencer handle even the initial part
sequencer: learn about the special "fake root commit" handling
sequencer: extract helper to update active_cache_tree
"git send-email" can sometimes offer confirmation dialog "Send this
email?" with choices 'Yes', 'No', 'Quit', and 'All'. A new action
'Edit' has been added to this dialog's choice.
* dd/send-email-reedit:
git-send-email: allow re-editing of message
sequencer: ensure labels that are object IDs are rewritten
When writing the todo script for --rebase-merges, we try to find a label
for certain commits. If the label ends up being a valid object ID, such
as when we merge a detached commit, we want to rewrite it so it is no
longer a valid object ID.
However, the code path that does this checks for its length to be
equivalent to GIT_SHA1_RAWSZ, which isn't correct, since what we are
reading is a hex object ID. Instead, check for the length being
equivalent to that of a hex object ID. Use the_hash_algo so this code
works regardless of the hash size.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t990X: use '.git/objects' as 'deep inside .git' path
Tests t9902-completion.sh and t9903-bash-prompt.sh each have tests
that check what happens when we are "in the '.git' directory" and
when we are "deep inside the '.git' directory".
To test the case when we are "deep inside the '.git' directory" the
test scripts used to perform a `cd .git/refs/heads`.
As there are plans to implement other ref storage systems, let's
use '.git/objects' instead of '.git/refs/heads' as the "deep inside
the '.git' directory" path.
This makes it clear to readers that these tests do not depend on
which ref backend is used.
The internals of the loose refs backend are still tested in
t1400-update-ref.sh.
Helped-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: David Turner <dturner@twopensource.com> Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Reviewed-by: Michael Haggerty <mhagger@alum.mit.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Orgad Shaneh <orgads@gmail.com> Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
submodule: do not pass null OID to setup_revisions
If "git pull --recurse-submodules --rebase" is invoked when the current
branch and its corresponding remote-tracking branch have no merge base,
a "bad object" fatal error occurs. This issue was introduced with commit a6d7eb2c7a ("pull: optionally rebase submodules (remote submodule
changes only)", 2017-06-23), which also introduced this feature.
This is because cmd_pull() in builtin/pull.c thus invokes
submodule_touches_in_range() with a null OID as the first parameter.
Ensure that this case works, and document what happens in this case.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com> Reviewed-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
rev-parse: check lookup'ed commit references for NULL
Commits 2122f8b963d4 ("rev-parse: Add support for the ^! and ^@ syntax",
2008-07-26) and 3dd4e7320d ("Teach rev-parse the ... syntax.", 2006-07-04)
taught rev-parse new syntax, and used lookup_commit_reference() as part of
their logic. Neither usage checked the returned commit to see if it was
non-NULL before using it. Check for NULL and ensure an appropriate error
is reported to the user.
Reported by Florian Weimer and Todd Zullinger.
Helped-by: Jeff King <peff@peff.net> Signed-off-by: Elijah Newren <newren@gmail.com> Reviewed-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use OPT_SET_INT_F() for cmdline option specification
The only thing these commands need is extra parseopt flag which can be
passed in by OPT_SET_INT_F() and it is a bit more compact than full
struct initialization.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
This can be used to "unshelve" a shelved P4 commit into
a git commit.
For example:
$ git p4 unshelve 12345
The resulting commit ends up in the branch:
refs/remotes/p4/unshelved/12345
If that branch already exists, it is renamed - for example
the above branch would be saved as p4/unshelved/12345.1.
git-p4 checks that the shelved changelist is based on files
which are at the same Perforce revision as the origin branch
being used for the unshelve (HEAD by default). If they are not,
it will refuse to unshelve. This is to ensure that the unshelved
change does not contain other changes mixed-in.
The reference branch can be changed manually with the "--origin"
option.
The change adds a new Unshelve command class. This just runs the
existing P4Sync code tweaked to handle a shelved changelist.
Signed-off-by: Luke Diamand <luke@diamand.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t: make many tests depend less on the refs being files
Many tests are very focused on the file system representation of the
loose and packed refs code. As there are plans to implement other
ref storage systems, let's migrate these tests to a form that test
the intent of the refs storage system instead of it internals.
This will make clear to readers that these tests do not depend on
which ref backend is used.
The internals of the loose refs backend are still tested in
t1400-update-ref.sh, whereas the tests changed in this patch focus
on testing other aspects.
This patch just takes care of many low hanging fruits. It does not
try to completely solves the issue.
Helped-by: Stefan Beller <sbeller@google.com> Helped-by: Johannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: David Turner <dturner@twopensource.com> Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The command line completion mechanism (in contrib/) learned to load
custom completion file for "git $command" where $command is a
custom "git-$command" that the end user has on the $PATH when using
newer version of bash.
* fg/completion-external:
completion: load completion file for external subcommand
Asciidoctor gives a reasonable imitation for AsciiDoc, but does not
render illustration in a literal block correctly when indented with
HT by default. The problem is fixed by forcing 8-space tabs.
* bc/asciidoctor-tab-width:
Documentation: render revisions correctly under Asciidoctor
Documentation: use 8-space tabs with Asciidoctor
* ah/misc-doc-updates:
doc: normalize [--options] to [options] in git-diff
doc: add note about shell quoting to revision.txt
git-svn: remove ''--add-author-from' for 'commit-diff'
doc: add '-d' and '-o' for 'git push'
doc: clarify ignore rules for git ls-files
doc: align 'diff --no-index' in text and synopsis
doc: improve formatting in githooks.txt