This option is passed separately to the wt_status printing
functions, whereas every other formatting option is
contained in the wt_status struct itself. Let's do the same
here, so we can avoid passing it around through the call
stack.
The options are declared as a static global, but really they
need only be accessible from cmd_commit. Additionally,
declare the "struct wt_status" in cmd_commit and cmd_status
as static at the top of each function; this will let the
options lists reference them directly, which will facilitate
further cleanups.
Documentation/git-config: describe and clarify "--local <file>" option
Describe config file selection in git-config. While the usage message of
git-config shows --local, the documentation page did not contain anything
about that.
Signed-off-by: Florian Achleitner <florian.achleitner.2.6.31@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
reflog-walk: tell explicit --date=default from not having --date at all
Introduction of opt->date_mode_explicit was a step in the right direction,
but lost that crucial bit at the very end of the callchain, and the callee
could not tell an explicitly specified "I want *date* but in default format"
from the built-in default value passed when there was no --date specified.
Merge branch 'jk/maint-gitweb-test-use-sane-perl' into maint
When using a Perl script on a system where "perl" found on user's $PATH
could be ancient or otherwise broken, we allow builders to specify the
path to a good copy of Perl with $PERL_PATH. The gitweb test forgot to
use that Perl when running its test.
By Jeff King (1) and Zbigniew Jędrzejewski-Szmek (1)
* jk/maint-gitweb-test-use-sane-perl:
Consistently use perl from /usr/bin/ for scripts
t/gitweb-lib: use $PERL_PATH to run gitweb
Merge branch 'rt/cherry-revert-conflict-summary' into maint
In the older days, the header "Conflicts:" in "cherry-pick" and "merge"
was separated by a blank line from the list of paths that follow for
readability, but when "merge" was rewritten in C, we lost it by
mistake. Remove the newline from "cherry-pick" to make them match again.
By Ralf Thielow
* rt/cherry-revert-conflict-summary:
sequencer: remove additional blank line
In 5bd631b3 ("clone: support multiple levels of verbosity"), the
default behavior to show progress of the implicit checkout in
the clone-command regressed so that progress was only shown if
the verbose-option was specified.
Fix this by making option_verbosity == 0 output progress as well.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
But if the new commit is actually one from this list (6aa1af6 in this
example), then the list in the warning can be truncated at the new HEAD,
because history beginning at HEAD is not "left behind". This makes it so.
Signed-off-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
reflog-walk: always make HEAD@{0} show indexed selectors
When we are showing reflog selectors during a walk, we infer
from context whether the user wanted to see the index in
each selector, or the reflog date. The current rules are:
1. if the user asked for an explicit date format in the
output, show the date
2. if the user asked for ref@{now}, show the date
3. if neither is true, show the index
However, if we see "ref@{0}", that should be a strong clue
that the user wants to see the counted version. In fact, it
should be much stronger than the date format in (1). The
user may have been setting the date format to use in another
part of the output (e.g., in --format="%gd (%ad)", they may
have wanted to influence the author date).
This patch flips the rules to:
1. if the user asked for ref@{0}, always show the index
2. if the user asked for ref@{now}, always show the date
3. otherwise, we have just "ref"; show them counted by
default, but respect the presence of "--date" as a clue
that the user wanted them date-based
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
reflog-walk: clean up "flag" field of commit_reflog struct
When we prepare to walk a reflog, we parse the specification
and pull some information from it, such as which reflog to
look in (e.g., HEAD), and where to start (e.g., HEAD@{10} or
HEAD@{yesterday}). The resulting struct has a "recno" field
to show where in the reflog we are starting. It also has a
"flag" field; if true, it means the recno field came from
parsing a date like HEAD@{yesterday}.
There are two problems with this:
1. "flag" is an absolutely terrible name, as it conveys
nothing about the meaning
2. you can tell "HEAD" from "HEAD@{yesterday}", but you
can't differentiate "HEAD" from "HEAD{0}"
This patch converts the flag into a tri-state (and gives it
a better name!).
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we show a reflog selector (e.g., via "git log -g"), we
perform some DWIM magic: while we normally show the entry's
index (e.g., HEAD@{1}), if the user has given us a date
with "--date", then we show a date-based select (e.g.,
HEAD@{yesterday}).
However, we don't want to trigger this magic if the
alternate date format we got was from the "log.date"
configuration; that is not sufficiently strong context for
us to invoke this particular magic. To fix this, commit f4ea32f (improve reflog date/number heuristic, 2009-09-24)
introduced a "date_mode_explicit" flag in rev_info. This
flag is set only when we see a "--date" option on the
command line, and we a vanilla date to the reflog code if
the date was not explicit.
Later, commit 8f8f547 (Introduce new pretty formats %g[sdD]
for reflog information, 2009-10-19) added another way to
show selectors, and it did not respect the date_mode_explicit
flag from f4ea32f.
This patch propagates the date_mode_explicit flag to the
pretty-print code, which can then use it to pass the
appropriate date field to the reflog code. This brings the
behavior of "%gd" in line with the other formats, and means
that its output is independent of any user configuration.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
We already check that @{now} and "--date" cause the
displayed selector to use the date for both the multiline
and oneline formats. However, we miss several cases:
1. The --format=%gd selector is not tested at all.
2. We do not check how the log.date config interacts with the
"--date" magic (according to f4ea32f, it should not
impact the output).
Doing so reveals that the combination of both (log.date
combined with the %gd format) does not behave as expected.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge branch 'jc/merge-reduce-parents-early' into maint
Octopus merge strategy did not reduce heads that are recorded in the final
commit correctly.
By Junio C Hamano (4) and Michał Kiedrowicz (1)
* jc/merge-reduce-parents-early:
fmt-merge-msg: discard needless merge parents
builtin/merge.c: reduce parents early
builtin/merge.c: collect other parents early
builtin/merge.c: remove "remoteheads" global variable
merge tests: octopus with redundant parents
Merge branch 'cb/cherry-pick-rev-path-confusion' into maint
The command line parser choked "git cherry-pick $name" when $name can be
both revision name and a pathname, even though $name can never be a path
in the context of the command.
By Clemens Buchacher
* cb/cherry-pick-rev-path-confusion:
cherry-pick: do not expect file arguments
HTTP transport that requires authentication did not work correctly when
multiple connections are used simultaneously.
By Jeff King (3) and Clemens Buchacher (1)
* cb/http-multi-curl-auth:
http: use newer curl options for setting credentials
http: clean up leak in init_curl_http_auth
fix http auth with multiple curl handles
http auth fails with multiple curl handles
Merge branch 'mb/fetch-call-a-non-branch-a-ref' into maint
The report from "git fetch" said "new branch" even for a non branch ref.
By Marc Branchaud
* mb/fetch-call-a-non-branch-a-ref:
fetch: describe new refs based on where it came from
fetch: Give remote_ref to update_local_ref() as well
Merge branch 'jm/maint-strncpy-diff-no-index' into maint
"diff --no-index" codepath had a few places that used fixed-size
buffer and truncated paths that are too long.
By Jim Meyering (1) and Junio C Hamano (1)
* jm/maint-strncpy-diff-no-index:
diff --no-index: use strbuf for temporary pathnames
diff: avoid stack-buffer-read-overrun for very long name
When "git fetch" encounters repositories with too many references, the
command line of "fetch-pack" that is run by a helper e.g. remote-curl, may
fail to hold all of them. Now such an internal invocation can feed the
references through the standard input of "fetch-pack".
By Ivan Todoroski
* it/fetch-pack-many-refs:
remote-curl: main test case for the OS command line overflow
fetch-pack: test cases for the new --stdin option
remote-curl: send the refs to fetch-pack on stdin
fetch-pack: new --stdin option to read refs from stdin
Merge branch 'jl/maint-submodule-recurse-fetch' into maint
"git fetch" that recurses into submodules on demand did not check if it
needs to go into submodules when non branches (most notably, tags) are
fetched.
By Jens Lehmann
* jl/maint-submodule-recurse-fetch:
submodules: recursive fetch also checks new tags for submodule commits
Merge branch 'lp/maint-diff-three-dash-with-graph' into maint
"log -p --graph" used with "--stat" had a few formatting error.
By Lucian Poston
* lp/maint-diff-three-dash-with-graph:
t4202: add test for "log --graph --stat -p" separator lines
log --graph: fix break in graph lines
log --graph --stat: three-dash separator should come after graph lines
Merge branch 'maint' of https://github.com/git-l10n/git-po
By Byrial Jensen (2) and others
via Jiang Xin (1) and Ralf Thielow (1)
* 'maint' of https://github.com/git-l10n/git-po:
l10n: Initial German translation
l10n: Update Simplified Chinese translation
l10n: Update git.pot (2 new messages)
l10n: Add the German translation team and initialize de.po
l10n: Add Danish team (da) to list of teams
l10n: New da.po file with 0 translations
l10n: Updated pt_PT language
While the majority of scripts use '#!/usr/bin/perl', some use
'#!/usr/bin/env perl'. In the end there is no difference, because the
Makefile rewrites "#!.*perl" with "#!$PERL_PATH" in scripted
Porcelains before installing. Nevertheless, the second form can be
misleading, because it suggests that perl found first in $PATH will be
used.
Suggested-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current code runs "perl gitweb.cgi" to test gitweb. This
will use whatever version of perl happens to be first in the
PATH. We are better off using the specific perl that the
user specified via PERL_PATH, which matches what gets put on
the #!-line of the built gitweb.cgi.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
log-tree: the previous one is still not quite right
The correct output would have NUL after each commit, so "-z --format=%s"
would have a single-liner subject with the line-terminating LF replaced
with NUL, and "-p/--stat -z --format=%s" would have a single-liner subject
with its line-terminating LF, followed by the diff/diffstat in which the
terminating LF of the last line is replaced with NUL, but to be consistent
with what "-p/--stat -z --pretty=format:%s" does, I think it is OK to
append NUL to the diff/diffstat part instead of replacing its last LF with
NUL.
The added test shows the update is still not right for "-p -z --format".
log-tree: use custom line terminator in line termination mode
When using a custom format in line termination mode (as opposed to line
separation mode), the configured line terminator is not used, so things
like "git log --pretty=tformat:%H -z" do not work properly.
Make it use the line terminator the user ordered.
Signed-off-by: Jan Krüger <jk@jk.gs> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, we tested only that "push --quiet --no-progress"
was silent. However, there are many other combinations that
were not tested:
1. no options at all (but stderr as a tty)
2. --no-progress by itself
3. --quiet by itself
4. --progress (when stderr not a tty)
These are tested elsewhere for general "push", but it is
important to test them separately for http. It follows a
very different code path than git://, and options must be
relayed across a remote helper to a separate send-pack
process (and in fact cases (1), (2), and (4) have all been
broken just for http at some point in the past).
We can drop the "--quiet --no-progress" test, as it is not
really interesting (it is already handled by testing them
separately in (2) and (3) above).
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The send_pack function gets a "progress" flag saying "yes,
definitely show progress" or "no, definitely do not show
progress". This gets set properly by transport_push when
send_pack is called directly.
However, when the send-pack command is executed separately
(as it is for the remote-curl helper), there is no way to
tell it "definitely do this". As a result, we do not
properly respect "git push --no-progress" for smart-http
remotes; you will still get progress if stderr is a tty.
This patch teaches send-pack --progress and --no-progress,
and teaches remote-curl to pass the appropriate option to
override send-pack's isatty check. This fixes the
--no-progress case above, and as a bonus, also makes "git
push --progress" work when stderr is not a tty.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The send_pack_args struct has two verbosity flags: "quiet"
and "progress". Originally, if "quiet" was set, we would
tell pack-objects explicitly to be quiet, and if "progress"
was set, we would tell it to show progress. Otherwise, we
told it neither, and it relied on isatty(2) to make the
decision itself.
However, commit 01fdc21 changed the meaning of these
variables. Now both "quiet" and "!progress" instruct us to
tell pack-objects to be quiet (and a non-zero "progress"
means the same as before). This works well for transports
which call send_pack directly, as the transport code copies
transport->progress into send_pack_args->progress, and they
both have the same meaning.
However, the code path of calling "git send-pack" was left
behind. It always sets "progress" to 0, and thus always
tells pack-objects to be quiet. We can work around this by
checking isatty(2) ourselves in the cmd_send_pack code path,
restoring the original behavior of the send-pack command.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of sourcing git-sh-setup from random place that is on the $PATH,
explicitly source $(git --exec-path)/git-sh-setup. As I do not personally
have any libexec/git-core directory on my $PATH like many other people, the
script will fail without this update.
You can already use relative paths in include.path, which
means that including "foo" from your global "~/.gitconfig"
will look in your home directory. However, you might want to
do something clever like putting "~/.gitconfig-foo" in a
specific repository's config file.
Signed-off-by: Jeff King <peff@peff.net> Acked-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
mksh does not allow $COLUMNS to be set below 12. mksh(1) says that
$COLUMNS is "always set, defaults to 80, unless the value as reported
by stty(1) is non-zero and sane enough". This applies also to setting
it directly for one command:
t5570: fix forwarding of git-daemon messages via cat
The shell function that starts git-daemon wants to read the first line of
the daemon's stderr to ensure that it started correctly. Subsequent daemon
errors should be redirected to fd 4 (which is the terminal in verbose mode
or /dev/null in quiet mode). To that end the shell script used 'read' to
get the first line of output, and then 'cat &' to forward everything else
in a background process.
The problem is, that 'cat >&4 &' does not produce any output because the
shell redirects a background process's stdin to /dev/null. To have this
command invocation do anything useful, we have to redirect its stdin
explicitly (which overrides the /dev/null redirection).
The shell function connects the daemon's stderr to its consumers via a
FIFO. We cannot just do this:
read line <git_daemon_output
cat <git_daemon_output >&4 &
because after the first redirection the pipe is closed and the daemon
could receive SIGPIPE if it writes at the wrong moment. Therefore, we open
the readable end of the FIFO only once on fd 7 in the shell and dup from
there to the stdin of the two consumers.
Signed-off-by: Johannes Sixt <j6t@kdbg.org> Acked-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
In asciidoc 7, backticks like `foo` produced a typographic
effect, but did not otherwise affect the syntax. In asciidoc
8, backticks introduce an "inline literal" inside which markup
is not interpreted. To keep compatibility with existing
documents, asciidoc 8 has a "no-inline-literal" attribute to
keep the old behavior. We enabled this so that the
documentation could be built on either version.
It has been several years now, and asciidoc 7 is no longer
in wide use. We can now decide whether or not we want
inline literals on their own merits, which are:
1. The source is much easier to read when the literal
contains punctuation. You can use `master~1` instead
of `master{tilde}1`.
2. They are less error-prone. Because of point (1), we
tend to make mistakes and forget the extra layer of
quoting.
This patch removes the no-inline-literal attribute from the
Makefile and converts every use of backticks in the
documentation to an inline literal (they must be cleaned up,
or the example above would literally show "{tilde}" in the
output).
Problematic sites were found by grepping for '`.*[{\\]' and
examined and fixed manually. The results were then verified
by comparing the output of "html2text" on the set of
generated html pages. Doing so revealed that in addition to
making the source more readable, this patch fixes several
formatting bugs:
- HTML rendering used the ellipsis character instead of
literal "..." in code examples (like "git log A...B")
- some code examples used the right-arrow character
instead of '->' because they failed to quote
- api-config.txt did not quote tilde, and the resulting
HTML contained a bogus snippet like:
<tt><sub></tt> foo <tt></sub>bar</tt>
which caused some parsers to choke and omit whole
sections of the page.
- git-commit.txt confused ``foo`` (backticks inside a
literal) with ``foo'' (matched double-quotes)
- mentions of `A U Thor <author@example.com>` used to
erroneously auto-generate a mailto footnote for
author@example.com
- the description of --word-diff=plain incorrectly showed
the output as "[-removed-] and {added}", not "{+added+}".
- using "prime" notation like:
commit `C` and its replacement `C'`
confused asciidoc into thinking that everything between
the first backtick and the final apostrophe were meant
to be inside matched quotes
- asciidoc got confused by the escaping of some of our
asterisks. In particular,
`credential.\*` and `credential.<url>.\*`
properly escaped the asterisk in the first case, but
literally passed through the backslash in the second
case.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
When PATH contains an unreadable directory, alias expansion code did
not kick in, and failed with an error that said "git-subcmd" was not
found.
By Jeff King (1) and Ramsay Jones (1)
* jk/run-command-eacces:
run-command: treat inaccessible directories as ENOENT
compat/mingw.[ch]: Change return type of exec functions to int
The 'push to upstream' implementation was broken in some corner
cases. "git push $there" without refspec, when the current branch is
set to push to a remote different from $there, used to push to $there
using the upstream information to a remote unreleated to $there.
* jc/push-upstream-sanity:
push: error out when the "upstream" semantics does not make sense
Merge branch 'jc/maint-clean-nested-worktree-in-subdir' into maint
"git clean -d -f" (not "-d -f -f") is supposed to protect nested
working trees of independent git repositories that exist in the
current project working tree from getting removed, but the protection
applied only to such working trees that are at the top-level of the
current project by mistake.
* jc/maint-clean-nested-worktree-in-subdir:
clean: preserve nested git worktree in subdirectories
Rename detection logic used to match two empty files as renames during
merge-recursive, leading unnatural mismerges.
By Jeff King
* jk/diff-no-rename-empty:
merge-recursive: don't detect renames of empty files
teach diffcore-rename to optionally ignore empty content
make is_empty_blob_sha1 available everywhere
drop casts from users EMPTY_TREE_SHA1_BIN
Merge branch 'jc/commit-unedited-template' into maint
When "git commit --template F" errors out because the user did not
touch the message, it claimed that it aborts due to "empty message",
which was utterly wrong.
By Junio C Hamano (4) and Adam Monsen (1)
* jc/commit-unedited-template:
Documentation/git-commit: rephrase the "initial-ness" of templates
git-commit.txt: clarify -t requires editing message
commit: rephrase the error when user did not touch templated log message
commit: do not trigger bogus "has templated message edited" check
t7501: test the right kind of breakage
Merge branch 'jc/commit-hook-authorship' into maint
"git commit --author=$name" did not tell the name that was being
recorded in the resulting commit to hooks, even though it does do so
when the end user overrode the authorship via the "GIT_AUTHOR_NAME"
environment variable.
* jc/commit-hook-authorship:
commit: pass author/committer info to hooks
t7503: does pre-commit-hook learn authorship?
ident.c: add split_ident_line() to parse formatted ident line
Merge branch 'tr/maint-word-diff-regex-sticky' into maint
The regexp configured with diff.wordregex was incorrectly reused
across files.
By Thomas Rast (2) and Johannes Sixt (1)
* tr/maint-word-diff-regex-sticky:
diff: tweak a _copy_ of diff_options with word-diff
diff: refactor the word-diff setup from builtin_diff_cmd
t4034: diff.*.wordregex should not be "sticky" in --word-diff
Merge branch 'jh/notes-merge-in-git-dir-worktree' into maint
Running "notes merge --commit" failed to perform correctly when run
from any directory inside $GIT_DIR/. When "notes merge" stops with
conflicts, $GIT_DIR/NOTES_MERGE_WORKTREE is the place a user edits
to resolve it.
By Johan Herland (3) and Junio C Hamano (1)
* jh/notes-merge-in-git-dir-worktree:
notes-merge: Don't remove .git/NOTES_MERGE_WORKTREE; it may be the user's cwd
notes-merge: use opendir/readdir instead of using read_directory()
t3310: illustrate failure to "notes merge --commit" inside $GIT_DIR/
remove_dir_recursively(): Add flag for skipping removal of toplevel dir
bundle: remove stray single-quote from error message
After running rev-list --boundary to retrieve the list of boundary
commits, "git bundle create" runs its own revision walk. If in this
stage git encounters an unfamiliar option, it writes a message with an
unbalanced quotation mark:
error: unrecognized argument: --foo'
Drop the stray quote to match the "unrecognized argument: %s" message
used elsewhere and save translators some work.
This is mostly a futureproofing measure: for now, the "rev-list
--boundary" command catches most strange arguments on its own and the
above message is not seen unless you try something esoteric like "git
bundle create test.bundle --header HEAD".
Reported-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
config: reject bogus section names for --rename-section
You can feed junk to "git config --rename-section", which
will result in a config file that git will not even parse
(so you cannot fix it with git-config). We already have
syntactic sanity checks when setting a variable; let's do
the same for section names.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-remote-testgit: fix race when spawning fast-import
Test "pushing to local repo" in t5800-remote-helpers can hang
due to a race condition in git-remote-testgit. Fix it by
setting stdin to unbuffered.
On the writer side, "git push" invokes push_refs_with_export(),
which sends to stdout the command "export\n" and immediately
starts up "git fast-export". The latter writes its output stream
to the same stdout.
On the reader side, remote helper "git-remote-testgit" reads from
stdin to get its next command. It uses getc() to read characters
from libc up until \n. Libc has buffered a potentially much
larger chunk of stdin. When it sees the "export\n" command, it
forks "git fast-import" to read the stream.
If fast-export finishes before git fast-import starts, the
fast-export output can end up in libc's buffer in
git-remote-testgit, rather than in git fast-import. The latter
hangs indefinitely on a now-empty stdin.
Signed-off-by: Pete Wyckoff <pw@padd.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t9300-fast-import: avoid 'exit' in test_expect_success snippets
Exiting from a for-loop early using '|| break' does not propagate the
failure code, and for this reason, the tests used just 'exit'. But this
ends the test script with 'FATAL: Unexpected exit code 1' in the case of
a failed test.
Fix this by moving the loop into a shell function, from which we can
simply return early.
While at it, modernize the style of the affected test cases.
Signed-off-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is used by "git pull" to construct a merge message from list of
remote refs. When pulling redundant set of refs, however, it did not
filter them even though the merge itself discards them as unnecessary.
git-gc executes many sub-commands. The argument list for
some of these is constant, but for others we add more
arguments at runtime. The latter is implemented by allocating
a constant extra number of NULLs, and either using a custom
append function, or just referencing unused slots by number.
As of commit 7e52f56, which added two new arguments, it is
possible to exceed the constant number of slots for "repack"
by running "git gc --aggressive", causing "git gc" to die.
This patch converts all of the static argv lists to use
argv-array. In addition to fixing the overflow caused by 7e52f56, it has a few advantages:
1. We can drop the custom append function (which,
incidentally, had an off-by-one error exacerbating the
static limit).
2. We can drop the ugly magic numbers used when adding
arguments to "prune".
3. Adding further arguments will be easier; you can just
add new "push" calls without worrying about increasing
any static limits.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
It can be convenient to push many strings in a single line
(e.g., if you are initializing an array with defaults). This
patch provides a convenience wrapper to allow this.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
An empty argv-array is initialized to point to a static
empty NULL-terminated array. The original implementation
separates the actual storage of the NULL-terminator from the
pointer to the list. This makes the exposed type a "const
char **", which nicely matches the type stored by the
argv-array.
However, this indirection means that one cannot use
empty_argv to initialize a static variable, since it is
not a constant.
Instead, we can expose empty_argv directly, as an array of
pointers. The only place we use it is in the ARGV_ARRAY_INIT
initializer, and it decays to a pointer appropriately there.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
When COLUMNS or --stat-width restricts the diff-stat width to near the
minimum, 26 columns, the graph_width value becomes negative. Consequently, the
graph part of diff-stat is not resized properly.
Signed-off-by: Lucian Poston <lucian.poston@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of waiting until we record the parents of resulting merge, reduce
redundant parents (including our HEAD) immediately after reading them.
The change to t7602 illustrates the essence of the effect of this change.
The octopus merge strategy used to be fed with redundant commits only to
discard them as "up-to-date", but we no longer feed such redundant commits
to it and the affected test degenerates to a regular two-head merge.
And obviously the known-to-be-broken test in t6028 is now fixed.
This happens when git merge is run to merge multiple commits that are
descendants of current HEAD (or are HEAD). We've hit this while updating
master to origin/master but accidentaly we called (while being on master):
$ git merge master origin/master
Here is a minimal testcase:
$ git init a && cd a
$ echo a >a && git add a
$ git commit -minitial
$ echo b >a && git add a
$ git commit -msecond
$ git checkout master^
$ git merge master master
Fast-forwarding to: master
Already up-to-date with master
Merge made by the 'octopus' strategy.
a | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
fetch: describe new refs based on where it came from
update_local_ref() used to say "[new branch]" when we stored a new ref
outside refs/tags/ hierarchy, but the message is more about what we
fetched, so use the refname at the origin to make that decision.
Also, only call a new ref a "branch" if it's under refs/heads/.
Signed-off-by: Marc Branchaud <marcnarc@xiplink.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Adjust stat width calculations to take --graph output into account
The recent change to compute the width of diff --stat did not take into
consideration the output from --graph. The consequence is that when both
options are used, e.g. in 'log --stat --graph', the lines are too long.
Adjust stat width calculations to take --graph output into account.
Signed-off-by: Lucian Poston <lucian.poston@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add tests which show that the width of the --prefix added by --graph
is not taken into consideration when the diff stat output width is
calculated.
Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl> Signed-off-by: Lucian Poston <lucian.poston@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
diff: avoid stack-buffer-read-overrun for very long name
Due to the use of strncpy without explicit NUL termination,
we could end up passing names n1 or n2 that are not NUL-terminated
to queue_diff, which requires NUL-terminated strings.
Ensure that each is NUL terminated.
Signed-off-by: Jim Meyering <meyering@redhat.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a commit-ish passed to cherry-pick or revert happens to have a file
of the same name, git complains that the argument is ambiguous and
advises to use '--'. To make things worse, the '--' argument is removed
by parse_options, und so passing '--' has no effect.
Instead, always interpret cherry-pick/revert arguments as revisions.
Signed-off-by: Clemens Buchacher <drizzd@aon.at> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Various failure modes in the repository detection code path currently
quote the wrong directory in their error message. The working directory
is changed iteratively to the parent directory until a git repository is
found. If the working directory cannot be changed to the parent
directory for some reason, the detection gives up and prints an error
message. The error message should report the current working directory.
Instead of continually updating the 'cwd' variable, which is actually
used to remember the original working directory, the 'offset' variable
is used to keep track of the current working directory. At the point
where the affected error handling code is called, 'offset' already
points to the end of the parent of the working directory, rather than
the current working directory.
Fix this by explicitly using a variable 'offset_parent' and update
'offset' concurrently with the call to chdir.
In a similar fashion, the function get_device_or_die() would print the
original working directory in case of a failure, rather than the current
working directory. Fix this as well by making use of the 'offset'
variable.
Lastly, replace the phrase 'mount parent' with 'mount point'. The former
appears to be a typo.
Signed-off-by: Clemens Buchacher <drizzd@aon.at> Signed-off-by: Junio C Hamano <gitster@pobox.com>