"git describe --contains" often made a hard-to-justify choice of
tag to give name to a given commit, because it tried to come up
with a name with smallest number of hops from a tag, causing an old
commit whose close descendant that is recently tagged were not
described with respect to an old tag but with a newer tag. It did
not help that its computation of "hop" count was further tweaked to
penalize being on a side branch of a merge. The logic has been
updated to favor using the tag with the oldest tagger date, which
is a lot easier to explain to the end users: "We describe a commit
in terms of the (chronologically) oldest tag that contains the
commit."
* js/name-rev-use-oldest-ref:
name-rev: include taggerdate in considering the best name
Contributions-by: Matthieu Moy <Matthieu.Moy@imag.fr> Contributions-by: Stefan Tatschner <rumpelsepp@sevenbyte.org> Contributions-by: Simon P <simon.git@le-huit.fr> Contributions-by: Leander Hasty <leander@1stplayable.com> Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
On Cygwin, object creation uses the "create a temporary and then
rename it to the final name" pattern, not "create a temporary,
hardlink it to the final name and then unlink the temporary"
pattern.
This is necessary to use Git on Windows shared directories, and is
already enabled for the MinGW and plain Windows builds. It also
has been used in Cygwin packaged versions of Git for quite a while.
See http://thread.gmane.org/gmane.comp.version-control.git/291853
($gmane/275680, $gmane/291853).
"git config" had a codepath that tried to pass a NULL to
printf("%s"), which nobody seems to have noticed.
* jk/do-not-printf-NULL:
git_config_set_multivar_in_file: handle "unset" errors
git_config_set_multivar_in_file: all non-zero returns are errors
config: lower-case first word of error strings
Merge branch 'sb/submodule-helper-clone-regression-fix' into maint
A partial rewrite of "git submodule" in the 2.7 timeframe changed
the way the gitdir: pointer in the submodules point at the real
repository location to use absolute paths by accident. This has
been corrected.
* sb/submodule-helper-clone-regression-fix:
submodule--helper, module_clone: catch fprintf failure
submodule--helper: do not borrow absolute_path() result for too long
submodule--helper, module_clone: always operate on absolute paths
submodule--helper clone: create the submodule path just once
submodule--helper: fix potential NULL-dereference
recursive submodules: test for relative paths
Merge branch 'jk/branch-shortening-funny-symrefs' into maint
A change back in version 2.7 to "git branch" broke display of a
symbolic ref in a non-standard place in the refs/ hierarchy (we
expect symbolic refs to appear in refs/remotes/*/HEAD to point at
the primary branch the remote has, and as .git/HEAD to point at the
branch we locally checked out).
* jk/branch-shortening-funny-symrefs:
branch: fix shortening of non-remote symrefs
Merge branch 'es/format-patch-doc-hide-no-patch' into maint
"git format-patch --help" showed `-s` and `--no-patch` as if these
are valid options to the command. We already hide `--patch` option
from the documentation, because format-patch is about showing the
diff, and the documentation now hides these options as well.
* es/format-patch-doc-hide-no-patch:
git-format-patch.txt: don't show -s as shorthand for multiple options
When "git worktree" feature is in use, "git branch -m" renamed a
branch that is checked out in another worktree without adjusting
the HEAD symbolic ref for the worktree.
* ky/branch-m-worktree:
set_worktree_head_symref(): fix error message
branch -m: update all per-worktree HEADs
refs: add a new function set_worktree_head_symref
Merge branch 'jk/check-repository-format' into maint
The repository set-up sequence has been streamlined (the biggest
change is that there is no longer git_config_early()), so that we
do not attempt to look into refs/* when we know we do not have a
Git repository.
* jk/check-repository-format:
verify_repository_format: mark messages for translation
setup: drop repository_format_version global
setup: unify repository version callbacks
init: use setup.c's repo version verification
setup: refactor repo format reading and verification
config: drop git_config_early
check_repository_format_gently: stop using git_config_early
lazily load core.sharedrepository
wrap shared_repository global in get/set accessors
setup: document check_repository_format()
Merge branch 'tb/blame-force-read-cache-to-workaround-safe-crlf' into maint
When running "git blame $path" with unnormalized data in the index
for the path, the data in the working tree was blamed, even though
"git add" would not have changed what is already in the index, due
to "safe crlf" that disables the line-end conversion. It has been
corrected.
* tb/blame-force-read-cache-to-workaround-safe-crlf:
correct blame for files commited with CRLF
Merge branch 'sg/diff-multiple-identical-renames' into maint
"git diff -M" used to work better when two originally identical
files A and B got renamed to X/A and X/B by pairing A to X/A and B
to X/B, but this was broken in the 2.0 timeframe.
* sg/diff-multiple-identical-renames:
diffcore: fix iteration order of identical files during rename detection
Unify internal logic between "git tag -v" and "git verify-tag"
commands by making one directly call into the other.
* st/verify-tag:
tag -v: verify directly rather than exec-ing verify-tag
verify-tag: move tag verification code to tag.c
verify-tag: prepare verify_tag for libification
verify-tag: update variable name and type
t7030: test verifying multiple tags
builtin/verify-tag.c: ignore SIGPIPE in gpg-interface
"git push" from a corrupt repository that attempts to push a large
number of refs deadlocked; the thread to relay rejection notices
for these ref updates blocked on writing them to the main thread,
after the main thread at the receiving end notices that the push
failed and decides not to read these notices and return a failure.
* jk/push-client-deadlock-fix:
t5504: drop sigpipe=ok from push tests
fetch-pack: isolate sigpipe in demuxer thread
send-pack: isolate sigpipe in demuxer thread
run-command: teach async threads to ignore SIGPIPE
send-pack: close demux pipe before finishing async process
Sources to many test helper binaries (and the generated helpers)
have been moved to t/helper/ subdirectory to reduce clutter at the
top level of the tree.
* nd/test-helpers:
test helpers: move test-* to t/helper/ subdirectory
Makefile: clean *.o files we create
The "user.useConfigOnly" configuration variable makes it an error
if users do not explicitly set user.name and user.email. However,
its check was not done early enough and allowed another error to
trigger, reporting that the default value we guessed from the
system setting was unusable. This was a suboptimal end-user
experience as we want the users to set user.name/user.email without
relying on the auto-detection at all.
* da/user-useconfigonly:
ident: give "please tell me" message upon useConfigOnly error
ident: check for useConfigOnly before auto-detection of name/email
The possible reasons for exiting are now ordered by the exit code value.
While at it, rewrite the `can not write to the config file` to
`the config file cannot be written` to be grammatically correct and a
proper sentence.
Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
We want to tell the compiler that error_buf() uses
printf()-style arguments via the __attribute__ mechanism,
but the original commit (3a429d0), forgot the trailing "__".
This happens to work with real GNUC-compatible compilers
like gcc and clang, but confuses our fallback macro in
git-compat-util.h, which only matches the official name (and
thus the build fails on compilers like Visual Studio).
Reported-by: Philip Oakley <philipoakley@iee.org> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
l10n: fr: don't translate "merge" as a parameter
l10n: fr: change "id de clé" to match "id-clé"
l10n: fr: fix wrongly translated option name
l10n: fr: fix transcation of "dir"
"git submodule" reports the paths of submodules the command
recurses into, but this was incorrect when the command was not run
from the root level of the superproject.
* sb/submodule-path-misc-bugs:
t7407: make expectation as clear as possible
submodule update: test recursive path reporting from subdirectory
submodule update: align reporting path for custom command execution
submodule status: correct path handling in recursive submodules
submodule update --init: correct path handling in recursive submodules
submodule foreach: correct path display in recursive submodules
When "git merge" notices that the merge can be resolved purely at
the tree level (without having to merge blobs) and the resulting
tree happens to already exist in the object store, it forgot to
update the index, which lead to an inconsistent state for later
operations.
* en/merge-trivial-fix:
builtin/merge.c: fix a bug with trivial merges
t7605: add a testcase demonstrating a bug with trivial merges
Code restructuring around the "refs" area to prepare for pluggable
refs backends.
* dt/pre-refs-backend: (24 commits)
refs: on symref reflog expire, lock symref not referrent
refs: move resolve_ref_unsafe into common code
show_head_ref(): check the result of resolve_ref_namespace()
check_aliased_update(): check that dst_name is non-NULL
checkout_paths(): remove unneeded flag variable
cmd_merge(): remove unneeded flag variable
fsck_head_link(): remove unneeded flag variable
read_raw_ref(): change flags parameter to unsigned int
files-backend: inline resolve_ref_1() into resolve_ref_unsafe()
read_raw_ref(): manage own scratch space
files-backend: break out ref reading
resolve_ref_1(): eliminate local variable "bad_name"
resolve_ref_1(): reorder code
resolve_ref_1(): eliminate local variable
resolve_ref_unsafe(): ensure flags is always set
resolve_ref_unsafe(): use for loop to count up to MAXDEPTH
resolve_missing_loose_ref(): simplify semantics
t1430: improve test coverage of deletion of badly-named refs
t1430: test for-each-ref in the presence of badly-named refs
t1430: don't rely on symbolic-ref for creating broken symrefs
...
"git rerere" can encounter two or more files with the same conflict
signature that have to be resolved in different ways, but there was
no way to record these separate resolutions.
* jc/rerere-multi:
rerere: adjust 'forget' to multi-variant world order
rerere: split code to call ll_merge() further
rerere: move code related to "forget" together
rerere: gc and clear
rerere: do use multiple variants
t4200: rerere a merge with two identical conflicts
rerere: allow multiple variants to exist
rerere: delay the recording of preimage
rerere: handle leftover rr-cache/$ID directory and postimage files
rerere: scan $GIT_DIR/rr-cache/$ID when instantiating a rerere_id
rerere: split conflict ID further
difftool/mergetool: make the form of yes/no questions consistent
Every yes/no question in difftool/mergetool scripts has slightly
different form, and none of them is consistent with the form git
itself uses.
Make the form of all the questions consistent with the form used
by git.
Reviewed-by: John Keeping <john@keeping.me.uk> Signed-off-by: Nikola Forró <nforro@redhat.com> Acked-by: David Aguilar <davvid@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge tag 'l10n-2.8.0-rnd3-fr' of git://github.com/git-l10n/git-po into maint
l10n-2.8.0-rnd3-fr
* tag 'l10n-2.8.0-rnd3-fr' of git://github.com/git-l10n/git-po:
l10n: fr: don't translate "merge" as a parameter
l10n: fr: change "id de clé" to match "id-clé"
l10n: fr: fix wrongly translated option name
l10n: fr: fix transcation of "dir"
string_list: use string-list API in unsorted_string_list_lookup()
Using the string-list API in function unsorted_string_list_lookup()
makes the code more readable.
Signed-off-by: Ralf Thielow <ralf.thielow@gmail.com> Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge branch 'fr_v2.8.0_r3' of git://github.com/jnavila/git into maint
* 'fr_v2.8.0_r3' of git://github.com/jnavila/git:
l10n: fr: don't translate "merge" as a parameter
l10n: fr: change "id de clé" to match "id-clé"
l10n: fr: fix wrongly translated option name
l10n: fr: fix transcation of "dir"
On Cygwin, object creation uses the "create a temporary and then
rename it to the final name" pattern, not "create a temporary,
hardlink it to the final name and then unlink the temporary"
pattern.
This is necessary to use Git on Windows shared directories, and is
already enabled for the MinGW and plain Windows builds. It also
has been used in Cygwin packaged versions of Git for quite a while.
See http://thread.gmane.org/gmane.comp.version-control.git/291853
"git config" had a codepath that tried to pass a NULL to
printf("%s"), which nobody seems to have noticed.
* jk/do-not-printf-NULL:
git_config_set_multivar_in_file: handle "unset" errors
git_config_set_multivar_in_file: all non-zero returns are errors
config: lower-case first word of error strings
Upcoming OpenSSL 1.1.0 will break compilation b updating a few APIs
we use in imap-send, which has been adjusted for the change.
* ky/imap-send-openssl-1.1.0:
configure: remove checking for HMAC_CTX_cleanup
imap-send: avoid deprecated TLSv1_method()
imap-send: check NULL return of SSL_CTX_new()
imap-send: use HMAC() function provided by OpenSSL
A partial rewrite of "git submodule" in the 2.7 timeframe changed
the way the gitdir: pointer in the submodules point at the real
repository location to use absolute paths by accident. This has
been corrected.
* sb/submodule-helper-clone-regression-fix:
submodule--helper, module_clone: catch fprintf failure
submodule--helper: do not borrow absolute_path() result for too long
submodule--helper, module_clone: always operate on absolute paths
submodule--helper clone: create the submodule path just once
submodule--helper: fix potential NULL-dereference
recursive submodules: test for relative paths
mmap(win32): avoid copy-on-write when it is unnecessary
Often we are mmap()ing read-only. In those cases, it is wasteful to map in
copy-on-write mode. Even worse: it can cause errors where we run out of
space in the page file.
So let's be extra careful to map files in read-only mode whenever
possible.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is not really helpful when a `git fetch` fails with the message:
fatal: mmap failed: No error
In the particular instance encountered by a colleague of yours truly,
the Win32 error code was ERROR_COMMITMENT_LIMIT which means that the
page file is not big enough.
Let's make the message
fatal: mmap failed: File too large
instead, which is only marginally better, but which can be associated
with the appropriate work-around: setting `core.packedGitWindowSize` to
a relatively small value.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Its last call site was replaced by mks_tempfile_ts() in 284098f (diff:
use tempfile module - 2015-08-12) and there's a good chance
mks_tempfile_ts will continue to successfully handle this job. Delete
it.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
It was largely replaced by fnmatch_icase_mem() and its last use was in 84b8b5d (remove match_pathspec() in favor of match_pathspec_depth() -
2013-07-14).
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
tag -v: verify directly rather than exec-ing verify-tag
Instead of having tag -v fork to run verify-tag, use the
gpg_verify_tag() function directly.
Helped-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Santiago Torres <santiago@nyu.edu> Reviewed-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The PGP verification routine for tags could be accessed by other modules
that require to do so.
Publish the verify_tag function in tag.c and rename it to gpg_verify_tag
so it does not conflict with builtin/mktag's static function.
Helped-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Santiago Torres <santiago@nyu.edu> Reviewed-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current interface of verify_tag() resolves reference names to SHA1,
however, the plan is to make this functionality public and the current
interface is cumbersome for callers: they are expected to supply the
textual representation of a sha1/refname. In many cases, this requires
them to turn the sha1 to hex representation, just to be converted back
inside verify_tag.
Add a SHA1 parameter to use instead of the name parameter, and rename
the name parameter to "name_to_report" for reporting purposes only.
Helped-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Santiago Torres <santiago@nyu.edu> Reviewed-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
To get the 'value' from '--option=value', test-lib.sh parses said
option running 'expr' with a regexp. This involves a subshell, an
external process, and a lot of non-alphanumeric characters in the
regexp.
Use a much simpler POSIX-defined shell parameter expansion instead to
do the same.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
name-rev: include taggerdate in considering the best name
We most likely want the oldest tag that contained the commit to be
reported. So let's remember the taggerdate, and make it more important
than anything else when choosing the best name for a given commit.
Suggested by Linus Torvalds.
Note that we need to update t9903 because it tested for the old behavior
(which preferred the description "b1~1" over "tags/t2~1").
We might want to introduce a --heed-taggerdate option, and make the new
behavior dependent on that, if it turns out that some scripts rely on the
old name-rev method.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
pull: pass --allow-unrelated-histories to "git merge"
The previous commit said:
We could add the same option to "git pull" and have it passed
through to underlying "git merge". I do not have a fundamental
opposition against such a feature, but this commit does not do
so and instead leaves it as low-hanging fruit for others,
because such a "two project merge" would be done after fetching
the other project into some location in the working tree of an
existing project and making sure how well they fit together, it
is sufficient to allow a local merge without such an option
pass-through from "git pull" to "git merge".
Prepare a patch to make it a reality, just in case it is needed.
Because "test_commit five" creates a commit and point it with a tag
'five', doing so on a branch whose name is 'five' will later result
in an 'ambiguous refs' warning. Even though it is harmless because
all the later references are for the tag, there is no reason for the
branch to be called 'five'. Give it a name that describes its
purpose more clearly, i.e. "newroot".
These were added by 8bf4bec (add "ok=sigpipe" to
test_must_fail and use it to fix flaky tests, 2015-11-27)
because we would racily die via SIGPIPE when the pack was
rejected by the other side.
But since we have recently de-flaked send-pack, we should be
able to tighten up these tests (including re-adding the
expected output checks).
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
In commit 9ff18fa (fetch-pack: ignore SIGPIPE in sideband
demuxer, 2016-02-24), we started using sigchain_push() to
ignore SIGPIPE in the async demuxer thread. However, this is
rather clumsy, as it ignores SIGPIPE for the entire process,
including the main thread. At the time we didn't have any
per-thread signal support, but we now we do. Let's use it.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we get an error from pack-objects, we may exit
send_pack() early, before reading the server's status
response. In such a case, we may racily see SIGPIPE from our
async demuxer (which is trying to write that status back to
us), and we'd prefer to continue pushing the error up the
call stack, rather than taking down the whole process with
signal death.
This is safe to do because our demuxer just calls
recv_sideband, whose data writes are all done with
write_or_die(), which will notice SIGPIPE.
We do also write sideband 2 to stderr, and we would no
longer die on SIGPIPE there (if it were piped in the first
place, and if the piped program went away). But that's
probably a good thing, as it likewise should not abort the
push process at all (neither immediately by signal, nor
eventually by reporting failure back to the main thread).
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
run-command: teach async threads to ignore SIGPIPE
Async processes can be implemented as separate forked
processes, or as threads (depending on the NO_PTHREADS
setting). In the latter case, if an async thread gets
SIGPIPE, it takes down the whole process. This is obviously
bad if the main process was not otherwise going to die, but
even if we were going to die, it means the main process does
not have a chance to report a useful error message.
There's also the small matter that forked async processes
will not take the main process down on a signal, meaning git
will behave differently depending on the NO_PTHREADS
setting.
This patch fixes it by adding a new flag to "struct async"
to block SIGPIPE just in the async thread. In theory, this
should always be on (which makes async threads behave more
like async processes), but we would first want to make sure
that each async process we spawn is careful about checking
return codes from write() and would not spew endlessly into
a dead pipe. So let's start with it as optional, and we can
enable it for specific sites in future patches.
The natural name for this option would be "ignore_sigpipe",
since that's what it does for the threaded case. But since
that name might imply that we are ignoring it in all cases
(including the separate-process one), let's call it
"isolate_sigpipe". What we are really asking for is
isolation. I.e., not to have our main process taken down by
signals spawned by the async process. How that is
implemented is up to the run-command code.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
send-pack: close demux pipe before finishing async process
This fixes a deadlock on the client side when pushing a
large number of refs from a corrupted repo. There's a
reproduction script below, but let's start with a
human-readable explanation.
The client side of a push goes something like this:
1. Start an async process to demux sideband coming from
the server.
2. Run pack-objects to send the actual pack, and wait for
its status via finish_command().
3. If pack-objects failed, abort immediately.
4. If pack-objects succeeded, read the per-ref status from
the server, which is actually coming over a pipe from
the demux process started in step 1.
We run finish_async() to wait for and clean up the demux
process in two places. In step 3, if we see an error, we
want it to end early. And after step 4, it should be done
writing any data and we are just cleaning it up.
Let's focus on the error case first. We hand the output
descriptor to the server over to pack-objects. So by the
time it has returned an error to us, it has closed the
descriptor and the server has gotten EOF. The server will
mark all refs as failed with "unpacker error" and send us
back the status for each (followed by EOF).
This status goes to the demuxer thread, which relays it over
a pipe to the main thread. But the main thread never even
tries reading the status. It's trying to bail because of the
pack-objects error, and is waiting for the demuxer thread to
finish. If there are a small number of refs, that's OK; the
demuxer thread writes into the pipe buffer, sees EOF from
the server, and quits. But if there are a large number of
refs, it may block on write() back to the main thread,
leading to a deadlock (the main thread is waiting for the
demuxer to finish, the demuxer is waiting for the main
thread to read).
We can break this deadlock by closing the pipe between the
demuxer and the main thread before calling finish_async().
Then the demuxer gets a write() error and exits.
The non-error case usually just works, because we will have
read all of the data from the other side. We do close
demux.out already, but we only do so _after_ calling
finish_async(). This is OK because there shouldn't be any
more data coming from the server. But technically we've only
read to a flush packet, and a broken or malicious server
could be sending more cruft. In such a case, we would hit
the same deadlock. Closing the pipe first doesn't affect the
normal case, and means that for a cruft-sending server,
we'll notice a write() error rather than deadlocking.
Note that when write() sees this error, we'll actually
deliver SIGPIPE to the thread, which will take down the
whole process (unless we're compiled with NO_PTHREADS). This
isn't ideal, but it's an improvement over the status quo,
which is deadlocking. And SIGPIPE handling in async threads
is a bigger problem that we can deal with separately.
A simple reproduction for the error case is below. It's
technically racy (we could exit the main process and take
down the async thread with us before it even reads the
status), though in practice it seems to fail pretty
consistently.
git init repo &&
cd repo &&
# make some commits; we need two so we can simulate corruption
# in the history later.
git commit --allow-empty -m one &&
one=$(git rev-parse HEAD) &&
git commit --allow-empty -m two &&
two=$(git rev-parse HEAD) &&
# now make a ton of refs; our goal here is to overflow the pipe buffer
# when reporting the ref status, which will cause the demuxer to block
# on write()
for i in $(seq 20000); do
echo "create refs/heads/this-is-a-really-long-branch-name-$i $two"
done |
git update-ref --stdin &&
# now make a corruption in the history such that pack-objects will fail
rm -vf .git/objects/$(echo $one | sed 's}..}&/}') &&
# and then push the result
git init --bare dst.git &&
git push --mirror dst.git
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
When migrating from Perforce to git the information about P4 jobs
associated with P4 changelists is lost.
Having these jobs listed on messages of related git commits enables smooth
migration for projects that take advantage of e.g. JIRA integration
(which uses jobs on Perforce side and parses commit messages on git side).
The jobs are added to the message in the same format as is expected when
migrating in the reverse direction.
Signed-off-by: Jan Durovec <jan.durovec@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The run_gpg_verify() function has two variables, size and len.
This may come off as confusing when reading the code. Clarify which one
pertains to the length of the tag headers by renaming len to
payload_size. Additionally, change the type of payload_size to size_t to
match the return type of parse_signature.
Signed-off-by: Santiago Torres <santiago@nyu.edu> Reviewed-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
When directories are moved using `git mv` all files in the directory
have been just moved, but no further action was taken on them. This
was done by assigning the mode = WORKING_DIRECTORY to the files
inside a moved directory.
submodules however need to update their link to the git directory as
well as updates to the .gitmodules file. By removing the condition of
`mode != INDEX` (the remaining modes are BOTH and WORKING_DIRECTORY) for
the required submodule actions, we perform these for submodules in a
moved directory.
Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The verify-tag command supports multiple tag names to verify, but
existing tests only test for invocation with a single tag.
Add a test invoking it with multiple tags.
Helped-by: Jeff King <peff@peff.net> Signed-off-by: Santiago Torres <santiago@nyu.edu> Reviewed-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
A change back in version 2.7 to "git branch" broke display of a
symbolic ref in a non-standard place in the refs/ hierarchy (we
expect symbolic refs to appear in refs/remotes/*/HEAD to point at
the primary branch the remote has, and as .git/HEAD to point at the
branch we locally checked out).
* jk/branch-shortening-funny-symrefs:
branch: fix shortening of non-remote symrefs