Prior to this commit, the cleanup trap that removes the tmp dir
created by the script would fail on Windows. The error was silently
ignored by the script.
On Windows, a directory cannot be removed while it is the working
directory of the process (thanks to Johannes Sixt on the Git list
for this info [1]).
This commit eliminates the 'cd' into the tmp directory that caused
the error.
The 'tar' utility is not available on all platforms (some only support
'gnutar'). An earlier commit created a work-around for this problem,
but a better solution is to eliminate the use of 'tar' completely.
Signed-off-by: Tim Henigan <tim.henigan@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
diff: tweak a _copy_ of diff_options with word-diff
When using word diff, the code sets the word_regex from various
defaults if it was not set already. The problem is that it does this
on the original diff_options, which will also be used in subsequent
diffs.
This means that when the word_regex is not given on the command line,
only the first diff for which a setting for word_regex (either from
attributes or diff.wordRegex) ever takes effect. This value then
propagates to the rest of the diff runs and in particular prevents
further attribute lookups.
Fix the problem of changing diff state once and for all, by working
with a _copy_ of the diff_options.
Noticed-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Thomas Rast <trast@student.ethz.ch> Signed-off-by: Junio C Hamano <gitster@pobox.com>
diff: refactor the word-diff setup from builtin_diff_cmd
Quite a chunk of builtin_diff_cmd deals with word-diff setup, defaults
and such. This makes the function a bit hard to read, but is also
asymmetric because the corresponding teardown lives in free_diff_words_data
already.
Refactor into a new function init_diff_words_data. For simplicity,
also shuffle around some functions it depends on.
Signed-off-by: Thomas Rast <trast@student.ethz.ch> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t4034: diff.*.wordregex should not be "sticky" in --word-diff
The test case applies a custom wordRegex to one file in a diff, and expects
that the default word splitting applies to the second file in the diff.
But the custom wordRegex is also incorrectly used for the second file.
Helped-by: Thomas Rast <trast@student.ethz.ch> Signed-off-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
test: use numstat instead of diffstat in binary-diff test
git's --stat output is intended for humans and since v1.7.9.2~13
(2012-02-01) varies by locale. The tests in this script using "apply
--stat" are meant to check two things:
- how binary file changes are accounted for and printed in
git's diffstat format
- that "git apply" can parse the various forms of binary diff
Split these two kinds of check into separate tests, and use --numstat
instead of --stat in the latter. This way, we lose less test coverage
when git is being run without writing its output in the C locale (for
example because GETTEXT_POISON is enabled) and there are fewer tests
to change if the --stat output needs to be tweaked again.
While at it, use commands separated by && that read and write to
temporary files in place of pipelines so segfaults and other failures
in the upstream of the processing pipeline don't get hidden.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
test: use --numstat instead of --stat in "git stash show" tests
git's diff --stat output is intended for human consumption and
since v1.7.9.2~13 (2012-02-01) varies by locale. Add a test checking
that git stash show defaults to --stat and tweak the rest of the
"stash show" tests that showed a diffstat to use numstat.
This way, there are fewer tests to tweak if the diffstat format
changes again. This also improves test coverage when running tests
with git configured not to write its output in the C locale (e.g.,
via GETTEXT_POISON=Yes).
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
test: test cherry-pick functionality and output separately
Since v1.7.3-rc0~26^2~9 (revert: report success when using option
--strategy, 2010-07-14), the cherry-pick-many-commits test checks the
format of output written to the terminal during a cherry-pick sequence
in addition to the functionality. There is no reason those have to
be checked in the same test, though, and it has some downsides:
- when progress output is broken, the test result does not convey
whether the functionality was also broken or not
- it is not immediately obvious when reading that these checks are
meant to prevent regressions in details of the output format and
are not just a roundabout way to check functional details like the
number of commits produced
- there is a temptation to include the same kind of output checking
for every new cherry-pick test, which would make future changes
to the output unnecessarily difficult
Put the tests from v1.7.3-rc0~26^2~9 in separate assertions, following
the principle "test one feature at a time".
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is one of the early tests, so it uses a style that by modern
standards can be hard to read. Tweak it to:
- clearly declare what assertion each test is designed to check
- mark tests that create state later tests will depend on with the
word "setup" so people writing or running tests know the others
can be skipped or reordered safely
- put commands that populate a file with expected output inside
the corresponding test stanza, so it is easier to see by eye
where each test begins and ends
- instead of pipelines, use commands that read and write a
temporary file, so bugs causing commands to segfault or produce
the wrong exit status can be caught.
More cosmetic changes:
- put the opening quote starting each test on the same line as the
test_expect_* invocation, and indent the commands in each test
with a single tab
- end the test early if the underlying filesystem cannot
accomodate the filenames we use, instead of marking all tests
with the same TABS_IN_FILENAMES prerequisite.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
test: use numstat instead of diffstat in funny-names test
This test script checks that git's plumbing commands quote filenames
with special characters like space, tab, and double-quote
appropriately in their input and output.
Since commit v1.7.9.2~13 (Use correct grammar in diffstat summary
line, 2012-02-01), the final "1 file changed, 1 insertion(+)" line
from diffstats is translatable, meaning tests that rely on exact "git
apply --stat" output have to be skipped when git is not configured to
produce output in the C locale (for example, when GETTEXT_POISON is
enabled). So:
- Tweak the three "git apply --stat" tests that check "git apply"'s
input parsing to use --numstat instead.
--numstat output is more reliable, does not vary with locale, and
is itself easier to parse. These tests are mainly about how "git
apply" parses its input so this should not result in much loss of
coverage.
- Add a new "apply --stat" test to check the quoting in --stat output
format.
This wins back a little of the test coverage lost with the patch
"test: use test_i18ncmp to check --stat output" when GETTEXT_POISON is
enabled.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
test: use test_i18ncmp when checking --stat output
Ever since v1.7.9.2~13 (2012-02-01), git's diffstat-style summary line
produced by "git apply --stat", "git diff --stat", and "git commit"
varies by locale, producing test failures when GETTEXT_POISON is set.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
It was unclear what a test in t0204 wanted to check; it turns out
that it was only to observe an undefined behaviour of the system,
and did not anticipate one kind of reasonable error behaviour.
* jc/maint-undefined-i18n-observation-test:
t0204: clarify the "observe undefined behaviour" test
When "git config" diagnoses an error in a configuration file and
shows the line number for the offending line, it miscounted if the
error was at the end of line.
By Martin Stenberg
* ms/maint-config-error-at-eol-linecount:
config: report errors at the EOL with correct line number
We have had these options as harmless no-op for more than 3 years without
officially deprecating them. Let's announce the deprecation and start
warning against their use, but without failing the command just not yet,
so that we can later repurpose the option if we want to in the future.
Merge branch 'tr/maint-bundle-boundary' into maint
"git bundle" did not record boundary commits correctly when there
are many of them.
By Thomas Rast
* tr/maint-bundle-boundary:
bundle: keep around names passed to add_pending_object()
t5510: ensure we stay in the toplevel test dir
t5510: refactor bundle->pack conversion
Merge branch 'jc/maint-diff-patch-header' into maint
"git diff-index" and its friends at the plumbing level showed the
"diff --git" header and nothing else for a path whose cached stat
info is dirty without actual difference when asked to produce a
patch. This was a longstanding bug that we could have fixed long
time ago.
By Junio C Hamano
* jc/maint-diff-patch-header:
diff -p: squelch "diff --git" header for stat-dirty paths
t4011: illustrate "diff-index -p" on stat-dirty paths
t4011: modernise style
Merge branch 'jn/maint-do-not-match-with-unsanitized-searchtext' into maint
"gitweb" did use quotemeta() to prepare search string when asked to
do a fixed-string project search, but did not use it by mistake and
used the user-supplied string instead.
By Jakub Narebski
* jn/maint-do-not-match-with-unsanitized-searchtext:
gitweb: Fix fixed string (non-regexp) project search
Merge branch 'jc/am-3-nonstandard-popt' into maint
The code to synthesize the fake ancestor tree used by 3-way merge
fallback in "git am" was not prepared to read a patch created with
a non-standard -p<num> value.
* jc/am-3-nonstandard-popt:
test: "am -3" can accept non-standard -p<num>
am -3: allow nonstandard -p<num> option
The --binary option to git-apply has been a no-op since 2b6eef9 (Make
apply --binary a no-op., 2006-09-06) and was deprecated in cb3a160
(git-am: ignore --binary option, 2008-08-09).
We could remove it outright, but let's be nice to people who still
have scripts saying 'git am -b' (if they exist) and tell them the
reason for the sudden failure.
Signed-off-by: Thomas Rast <trast@student.ethz.ch> Signed-off-by: Junio C Hamano <gitster@pobox.com>
i18n: fix auto detection of gettext scheme for shell scripts
A new code added by ad17ea7 (add a Makefile switch to avoid gettext
translation in shell scripts, 2012-01-23) tried to optionally force
a gettext scheme to "fallthrough", but ended up forcing it to everybody.
config: report errors at the EOL with correct line number
A section in a config file with a missing "]" reports the next line
as bad, same goes to a value with a missing end quote.
This happens because the error is not detected until the end of the
line, when line number is already increased. Fix this by decreasing
line number by one for these cases.
Signed-off-by: Martin Stenberg <martin@gnutiken.se> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Updates to localized messages for zn_CN and sv locales.
via Jiang Xin
* https://github.com/git-l10n/git-po:
l10n: Improve zh_CN translation for msg "not something we can merge"
l10n: Improve zh_CN trans for msg that cannot fast-forward
l10n: Update zh_CN translation for 1.7.10-rc0
Update Swedish translation (732t0f0u).
po/sv.po: add Swedish translation
l10n: Update git.pot (1 new message)
l10n: Update zh_CN translation for 1.7.9.2
l10n: Improve commit msg for zh_CN translation
l10n: Improve zh_CN translation for msg that make empty commit when amend.
l10n: Improve zh_CN translation for empty cherry-pick msg.
l10n: Improve zh_CN translation for msg about branch deletion deny
l10n: Improve zh_CN translation for lines insertion and deletion.
When lying the author name via GIT_AUTHOR_NAME environment variable
to "git commit", the hooks run by the command saw it and could act
on the name that will be recorded in the final commit. When the user
uses the "--author" option from the command line, the command should
give the same information to the hook, and back when "git command"
was a scripted Porcelain, it did set the environment variable and
hooks can learn the author name from it.
However, when the command was reimplemented in C, the rewritten code
was not very faithful to the original, and hooks stopped getting the
authorship information given with "--author". Fix this by exporting
the necessary environment variables.
When "--author" option is used to lie the authorship to "git commit"
command, hooks should learn the author name and email just like when
GIT_AUTHOR_NAME and GIT_AUTHOR_EMAIL environment variables are used
to lie the authorship. Test this.
ident.c: add split_ident_line() to parse formatted ident line
The commit formatting logic format_person_part() in pretty.c
implements the logic to split an author/committer ident line into
its parts, intermixed with logic to compute its output using these
piece it computes.
Separate the former out to a helper function split_ident_line() so
that other codepath can use the same logic, and rewrite the function
using the helper function.
Change the Exporter invocation in Git::I18N to be compatible with
5.8.0 to 5.8.2 inclusive. Before Exporter 5.57 (released with 5.8.3)
Exporter didn't export the 'import' subroutine.
Reported-by: Tom G. Christensen <tgc@statsbiblioteket.dk> Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
fast-import: don't allow 'ls' of path with empty components
As the fast-import manual explains:
The value of <path> must be in canonical form. That is it must
not:
. contain an empty directory component (e.g. foo//bar is invalid),
. end with a directory separator (e.g. foo/ is invalid),
. start with a directory separator (e.g. /foo is invalid),
Unfortunately the "ls" command accepts these invalid syntaxes and
responds by declaring that the indicated path is missing. This is too
subtle and causes importers to silently misbehave; better to error out
so the operator knows what's happening.
The C, R, and M commands already error out for such paths.
Reported-by: Andrew Sayers <andrew-git@pileofstuff.org> Analysis-by: David Barr <davidbarr@google.com> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
When the chosen directory has changed since it was last written to
pack, "tree_content_get" makes a deep copy of its content to scribble
on while computing the tree name, which we forgot to free.
This leak has been present since the 'ls' command was introduced in
v1.7.5-rc0~3^2~33 (fast-import: add 'ls' command, 2010-12-02).
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
t0204: clarify the "observe undefined behaviour" test
This test asks for an impossible conversion to the system by
preparing an UTF-8 translation with characters that cannot be
expressed in ISO-8859-1, and then asking the message shown in
ISO-8859-1. Even though the behaviour against such a request is
undefined, it may be interesting to see what the system does, and
the purpose of this test is to see if there are platforms that
exhibit behaviour that we haven't seen.
The original recognized two known modes of behaviour:
- the key used to query the message catalog ("TEST: Old English
Runes"), saying "I cannot do that i18n".
- impossible characters replaced with ASCII "?", saying "I punt".
but they were treated totally differently. The test simply issued
an informational message "Your system punts on this one" for the
first error mode, while it diagnosed the latter as "Your system is
good; you pass!".
It turns out that Mac OS X exhibits a third mode of error behaviour,
to spew out the raw value stored in the message catalog. The test
diagnosed this behaviour as "broken", but it is merely trying to do
its best to respond to an impossible request by saying "I punt" in a
way that is slightly different from the second one.
Update the offending test to make it clear what is (and is not)
being tested, update the code structure so that newly discovered
error mode can easily be added to it later, and reword the message
that comes from a failing case to clarify that it is not the system
that is broken when it fails, but merely that the behaviour is not
something we have seen.
configure: allow user to prevent $PATH "sanitization" on Solaris
On a Solaris 10 system with Solaris make installed as '/usr/xpg4/bin/make',
GNU make installed as '/usr/local/bin/make', and with '/usr/local/bin'
appearing in $PATH *before* '/usr/xpg4/bin', I was seeing errors like this
upon invoking "make all":
This happenes because the Git's Makefile, when running on Solaris,
automatically "sanitizes" $PATH by prepending '/usr/xpg6/bin' and
'/usr/xpg4/bin' to it in order to avoid using non-POSIX /bin/sh from
being used. In the setup described above, however, this has an
unintended consequence of forcing the use of Solaris make in recursive
make invocations -- even if the $(MAKE) macro is being correctly used in
them!
When building without using the autoconf machinery, this can be solved
by overriding $(SANE_TOOL_PATH). Teach the autoconf machinery to also
allow users of ./configure to override it from the command line with a
new --with-sane-tool-path option.
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'log -3000 (baseline)' test accidentally still used -1000 from an
earlier version.
Noticed-by: Lawrence Holding <Lawrence.Holding@cubic.com> Signed-off-by: Thomas Rast <trast@student.ethz.ch> Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adds the 'remaining' command to the documentation of
'git rerere'. This command was added in ac49f5ca (Feb 16 2011;
Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>) but
it was never documented.
Touch up the other rerere commands to reduce noise.
First noticed by Vincent van Ravesteijn.
Signed-off-by: Phil Hord <phil.hord@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Modify verify-tag to load relevant GPG variables from the git
configuratio file. This allows git tag -v to use an alternative
GPG binary in the same way that git tag -s does.
Signed-off-by: Alex Zepeda <alex@inferiorhumanorgans.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
By Jens Lehmann (3) and Johannes Sixt (1)
* jl/maint-submodule-relative:
submodules: fix ambiguous absolute paths under Windows
submodules: refactor computation of relative gitdir path
submodules: always use a relative path from gitdir to work tree
submodules: always use a relative path to gitdir
By Vincent van Ravesteijn
* vr/branch-doc:
Documentation/git-branch: add default for --contains
Documentation/git-branch: fix a typo
Documentation/git-branch: cleanups
By Junio C Hamano (2) and Ramsay Jones (1)
* jc/pickaxe-ignore-case:
ctype.c: Fix a sparse warning
pickaxe: allow -i to search in patch case-insensitively
grep: use static trans-case table
fix deletion of .git/objects sub-directories in git-prune/repack
Both git-prune and git-repack (and thus, git-gc) try to rmdir while
holding a DIR* handle on the directory. This can leave dangling
empty directories in the .git/objects on platforms where directory
cannot be removed while they are open.
First call closedir() and then rmdir(); that is more logical ordering.
Reported-by: John Chen <john0312@gmail.com> Reported-by: Stefan Naewe <stefan.naewe@gmail.com> Signed-off-by: Karsten Blees <blees@dcon.de> Improved-and-Acked-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
This command indirectly calls check_sha1_signature() (add_info_ref ->
deref_tag -> parse_object -> ..) , which may put whole blob in memory
if the blob's size is under core.bigfilethreshold. As config is not
read, the threshold is always 512MB. Respect user settings here.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Traditionally, all the callers of check_sha1_signature() first
called read_sha1_file() to prepare the whole object data in core,
and called this function. The function is used to revalidate what
we read from the object database actually matches the object name we
used to ask for the data from the object database.
Update the API to allow callers to pass NULL as the object data, and
have the function read and hash the object data using streaming API
to recompute the object name, without having to hold everything in
core at the same time. This is most useful in parse_object() that
parses a blob object, because this caller does not have to keep the
actual blob data around in memory after a "struct blob" is returned.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
New test cases list commands that should work when memory is
limited. All memory allocation functions (*) learn to reject any
allocation larger than $GIT_ALLOC_LIMIT if set.
(*) Not exactly all. Some places do not use x* functions, but
malloc/calloc directly, notably diff-delta. These code path should
never be run on large blobs.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
streaming: make streaming-write-entry to be more reusable
The static function in entry.c takes a cache entry and streams its blob
contents to a file in the working tree. Refactor the logic to a new API
function stream_blob_to_fd() that takes an object name and an open file
descriptor, so that it can be reused by other callers.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
By Junio C Hamano
* jc/maint-diff-patch-header:
diff -p: squelch "diff --git" header for stat-dirty paths
t4011: illustrate "diff-index -p" on stat-dirty paths
t4011: modernise style
By Thomas Rast
* tr/maint-bundle-boundary:
bundle: keep around names passed to add_pending_object()
t5510: ensure we stay in the toplevel test dir
t5510: refactor bundle->pack conversion
By Zbigniew Jędrzejewski-Szmek (8) and Junio C Hamano (1)
* zj/diff-stat-dyncol:
: This breaks tests. Perhaps it is not worth using the decimal-width stuff
: for this series, at least initially.
diff --stat: add config option to limit graph width
diff --stat: enable limiting of the graph part
diff --stat: add a test for output with COLUMNS=40
diff --stat: use a maximum of 5/8 for the filename part
merge --stat: use the full terminal width
log --stat: use the full terminal width
show --stat: use the full terminal width
diff --stat: use the full terminal width
diff --stat: tests for long filenames and big change counts
Use $search_regexp, where regex metacharacters are quoted, for
searching projects list, rather than $searchtext, which contains
original search term.
Reported-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk> Signed-off-by: Jakub Narebski <jnareb@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
OS X's sed and grep would complain with (respectively)
sed: 1: "/^-/{p;q}": extra characters at the end of q command
grep: Regular expression too big
For sed, use an explicit ; to terminate the q command.
For grep, spell the "40 hex digits" explicitly in the regex, which
should be safe as other tests already use this and we haven't got
breakage reports on OS X about them.
Signed-off-by: Thomas Rast <trast@inf.ethz.ch> Signed-off-by: Junio C Hamano <gitster@pobox.com>
8c912ee (teach --histogram to diff, 2011-07-12) claimed histogram diff
was faster than both Myers and patience.
We have since incorporated a performance testing framework, so add a
test that compares the various diff tasks performed in a real 'log -p'
workload. This does indeed show that histogram diff slightly beats
Myers, while patience is much slower than the others.
Signed-off-by: Thomas Rast <trast@student.ethz.ch> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most of the exact option strings to be typed by end users are
already set in typewriter font by using `--option`, but a few places
used '--option' to call for italics or with no quoting. Uniformly
use `--option`.
Also add a full-stop after a sentence that missed one.
Signed-off-by: Vincent van Ravesteijn <vfr@lyx.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
fast-import: zero all of 'struct tag' to silence valgrind
When running t9300, valgrind (correctly) complains about an
uninitialized value in write_crash_report:
==2971== Use of uninitialised value of size 8
==2971== at 0x4164F4: sha1_to_hex (hex.c:70)
==2971== by 0x4073E4: die_nicely (fast-import.c:468)
==2971== by 0x43284C: die (usage.c:86)
==2971== by 0x40420D: main (fast-import.c:2731)
==2971== Uninitialised value was created by a heap allocation
==2971== at 0x4C29B3D: malloc (vg_replace_malloc.c:263)
==2971== by 0x433645: xmalloc (wrapper.c:35)
==2971== by 0x405DF5: pool_alloc (fast-import.c:619)
==2971== by 0x407755: pool_calloc.constprop.14 (fast-import.c:634)
==2971== by 0x403F33: main (fast-import.c:3324)
Fix this by zeroing all of the 'struct tag'. We would only need to
zero out the 'sha1' field, but this way seems more future-proof.
Signed-off-by: Thomas Rast <trast@student.ethz.ch> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jn/gitweb-hilite-regions:
gitweb: Highlight matched part of shortened project description
gitweb: Highlight matched part of project description when searching projects
gitweb: Highlight matched part of project name when searching projects
gitweb: Introduce esc_html_match_hl and esc_html_hl_regions
Make git-{pull,rebase} message without tracking information friendlier
The current message is too long and at too low a level for anybody
to understand it if they don't know about the configuration format
already.
The text about setting up a remote is superfluous and doesn't help
understand or recover from the error that has happened. Show the
usage more prominently and explain how to set up the tracking
information. If there is only one remote, that name is used instead
of the generic <remote>.
Also simplify the message we print on detached HEAD to remove
unnecessary information which is better left for the documentation.
Signed-off-by: Carlos Martín Nieto <cmn@elego.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Update draft release notes to 1.7.9.3 for the last time
http.proxy: also mention https_proxy and all_proxy
t0300: work around bug in dash 0.5.6
t5512 (ls-remote): modernize style
tests: fix spurious error when run directly with Solaris /usr/xpg4/bin/sh