* tc/checkout-B:
builtin/checkout: handle -B from detached HEAD correctly
builtin/checkout: learn -B
builtin/checkout: reword hint for -b
add tests for checkout -b
When mergetool is run without path limiters it loops
over each entry in 'git ls-files -u'. This includes
autoresolved paths.
Teach mergetool to only merge files listed in 'rerere status'
when rerere is enabled.
There are some subtle but harmless changes in behavior.
We now call cd_to_toplevel when no paths are given.
We do this because 'rerere status' paths are always relative
to the root. This is beneficial for the non-rerere use as
well in that mergetool now runs against all unmerged files
regardless of the current directory.
This also slightly tweaks the output when run without paths
to be more readable.
The old output:
Merging the files: foo
bar
baz
The new output:
Merging:
foo
bar
baz
Signed-off-by: David Aguilar <davvid@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently git-svn assumes that two tags created from the same
revision will have the same repo url, so it uses a ref to the
tag without checking that its url matches the current url.
This causes issues when fetching an svn repo where a tag was
created, deleted, and then recreated under the following
circumstances:
- Both tags were copied from the same revision.
- Both tags had the same name.
- Both tags had different repository paths.
- [Optional] Both tags have a file with the same name but
different content.
When all four conditions are met, a checksum mismatch error
occurs because the content of two files with the same path
differs (see t/t9155--git-svn-fetch-deleted-tag.sh):
When only the first three conditions are met, no error occurs
but the tag in git matches the first (deleted) tag instead of
the last (most recent) tag (see
t/t9156-git-svn-fetch-deleted-tag-2.sh).
The fix is to verify that the repo url for the ref matches the
current url. If the urls do not match, then a "tail" is grown
on the tag name by appending a dash and rechecking the new ref's
repo url until either a matching repo url is found or a new tag
is created.
Signed-off-by: David D. Kilzer <ddkilzer@kilzer.net> Acked-by: Eric Wong <normalperson@yhbt.net>
Fix a regular expression used to remove the revision from the
end of an svn tag or branch name. The regex did not account for
any "tail" (dashes) that may have been added to the end of the
tag name (which first appeared in v1.4.1-rc2~11). If not fixed,
tags with names like "tags/mytag@5--@2" may be created.
Signed-off-by: David D. Kilzer <ddkilzer@kilzer.net> Acked-by: Eric Wong <normalperson@yhbt.net>
* bc/use-more-hardlinks-in-install:
Makefile: make hard/symbolic links for non-builtins too
Makefile: link builtins residing in bin directory to main git binary too
* tr/rfc-reset-doc:
Documentation/reset: move "undo permanently" example behind "make topic"
Documentation/reset: reorder examples to match description
Documentation/reset: promote 'examples' one section up
Documentation/reset: separate options by mode
Documentation/git-reset: reorder modes for soft-mixed-hard progression
* maint:
push: mention "git pull" in error message for non-fast forwards
Standardize do { ... } while (0) style
t/t7003: replace \t with literal tab in sed expression
index-pack: Don't follow replace refs.
push: mention "git pull" in error message for non-fast forwards
The message remains fuzzy to include "git pull", "git pull --rebase" and
others, but directs the user to the simplest solution in the vast
majority of cases.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t/t7003: replace \t with literal tab in sed expression
The sed utilities on IRIX and Solaris do not interpret the sequence '\t'
to mean a tab character; they read a literal character 't'. So, use a
literal tab instead.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Without this, attempting to index a pack containing objects that have been
replaced results in a fatal error that looks like:
fatal: SHA1 COLLISION FOUND WITH <replaced-object> !
Signed-off-by: Nelson Elhage <nelhage@ksplice.com> Acked-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
post-receive-email: remove spurious commas in email subject
fast-import: export correctly marks larger than 2^20-1
t/lib-git-svn.sh: use $PERL_PATH for perl, not perl from $PATH
diff: strip extra "/" when stripping prefix
fast-import: export correctly marks larger than 2^20-1
dump_marks_helper() has a bug when dumping marks larger than 2^20-1,
i.e., when the sparse array has more than two levels. The bug was
that the 'base' counter was being shifted by 20 bits at level 3, and
then again by 10 bits at level 2, rather than a total shift of 20 bits
in this argument to the recursive call:
(base + k) << m->shift
There are two ways to fix this correctly, the elegant:
(base + k) << 10
and the one I chose due to edit distance:
base + (k << m->shift)
Signed-off-by: Raja R Harinath <harinath@hurrynot.org> Acked-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t/lib-git-svn.sh: use $PERL_PATH for perl, not perl from $PATH
Change the git-svn tests to use $PERL_PATH, not the "perl" in $PATH.
Using perl in $PATH was added by Sam Vilain in v1.6.6-rc0~95^2~3,
Philippe Bruhat introduced $PERL_PATH to the test suite in
v1.6.6-rc0~9^2, but the lib-git-svn.sh tests weren't updated to use
the new convention.
This resulted in the git-svn tests always being skipped on my
system. My /usr/bin/perl has access to SVN::Core and SVN::Repos, but
the perl in my $PATH does not.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are two ways a user might want to use "diff --relative":
1. For a file in a directory, like "subdir/file", the user
can use "--relative=subdir/" to strip the directory.
2. To strip part of a filename, like "foo-10", they can
use "--relative=foo-".
We currently handle both of those situations. However, if the user passes
"--relative=subdir" (without the trailing slash), we produce inconsistent
results. For the unified diff format, we collapse the double-slash of
"a//file" correctly into "a/file". But for other formats (raw, stat,
name-status), we end up with "/file".
We can do what the user means here and strip the extra "/" (and only a
slash). We are not hurting any existing users of (2) above with this
behavior change because the existing output for this case was nonsensical.
Patch by Jakub, tests and commit message by Jeff King.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
gitweb: clarify search results page when no matching commit found
Documentation: add a FILES section for show-ref
Makefile: add missing dependency on http.h
Makefile: add missing dependencies on url.h
Documentation/git-log: Clarify --full-diff
git-rebase: fix typo when parsing --force-rebase
imap-send: Fix sprintf usage
prune: allow --dry-run for -n and --verbose for -v
notes: allow --dry-run for -n and --verbose for -v
Document -B<n>[/<m>], -M<n> and -C<n> variants of -B, -M and -C
Documentation: cite git-am from git-apply
t7003: fix subdirectory-filter test
Allow "check-ref-format --branch" from subdirectory
check-ref-format: handle subcommands in separate functions
pretty-options.txt: match --format's documentation with implementation.
gitweb: clarify search results page when no matching commit found
When searching commits for a string that never occurs, the results
page looks something like this:
projects / foo.git / search \o/
summary | ... | tree [commit] search: [ kfjdkas ] [ ]re
first ⋅ prev ⋅ next
Merge branch 'maint'
Foo: a demonstration project
Without a list of hits to compare it to, the header describing the
commit named by the hash parameter (usually HEAD) may itself look
like a hit. Add some text (“No match.”) to replace the empty
list of hits and avoid this confusion.
While at it, remove some nearby dead code, left behind from a
simplification a few years ago (v1.5.4-rc0~276^2~4, 2007-11-01).
Noticed-by: Erick Mattos <erick.mattos@gmail.com> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Acked-by: Jakub Narebski <jnareb@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
A peek at where the refs are kept might help understanding, even if,
as the DESCRIPTION section suggests, direct access is not part of the
public API.
Balance that out with a pointer to update-ref.
Suggested-by: Geoff Russell <geoffrey.russell@gmail.com> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
v1.7.1-rc0~65^2~2 (http: init and cleanup separately from
http-walker, 2010-03-02) introduced a direct dependency from
http-fetch on the HTTP request library. Declare it.
Detected with "make CHECK_HEADER_DEPENDENCIES=1".
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Acked-by: Tay Ray Chuan <rctay89@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
v1.7.2-rc0~56^2 and its parent (decode file:// and ssh://
URLs, 2010-05-23) introduced a new url library. Update the
Makefile with the relevant dependencies.
Detected with "make CHECK_HEADER_DEPENDENCIES=1".
Cc: Jeff King <peff@peff.net> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
When composing a command for the imap server, imap-send uses a single
nfsnprintf() invocation for brevity instead of dealing separately with
the case when there is a message to be sent and the case when there
isn’t. The unused argument in the second case, while valid, is
confusing for static analyzers and human readers.
v1.6.4-rc0~117 (imap-send: add support for IPv6, 2009-05-25)
mistakenly used %hu as the format for an int “port”, by analogy with
existing usage for the unsigned short “addr.sin_port”. Use %d
instead.
Noticed with clang.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
notes: allow --dry-run for -n and --verbose for -v
For consistency with other git commands, let the prune subcommand of
git notes accept the long options --dry-run and --verbose for the
respective short ones -n and -v.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge branch 'webrick' of git://git.bogomips.org/git-svn
* 'webrick' of git://git.bogomips.org/git-svn:
instaweb: add access+error logging for WEBrick
instaweb: minimize moving parts for WEBrick
instaweb: fix WEBrick server support
Users reading git-apply documentation may also be interested in git-am,
especially after receiving an email created with git-format-patch. The
documentation for git-am already references git-apply. Add the reverse.
Signed-off-by: Brad King <brad.king@kitware.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test would not fail if the filtering failed to do anything, since
in
test -z "$(git diff HEAD directorymoved:newsubdir)"'
'directorymoved:newsubdir' is not valid, so git-diff fails without
printing anything on stdout. But then the exit status of git-diff is
lost, whereas test -z "" succeeds.
Use 'git diff --exit-code' instead, which does the right thing and has
the added bonus of showing the differences if there are any.
Signed-off-by: Thomas Rast <trast@student.ethz.ch> Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the remote HTTP server fails (e.g. returns 404 or 500) when we
posted the RPC to it, we won't have sent anything to the background
Git process that is supposed to handle the stream. Because we
didn't send anything, its waiting for input from remote-curl, and
remote-curl cannot read its response payload because doing so would
lead to a deadlock.
Send the background task EOF on its input before we try to read
its response back, that way it will break out of its read loop
and terminate.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since there are WEBrick configuration settings (including the
upcoming AccessLog support) that cannot be represented in YAML
and require Ruby anyways, the YAML config file is an unnecessary
layer of complexity.
Additionally, the shell script wrapper to start WEBrick is
unecessary since our generated Ruby script can be made
executable in the same manner with /usr/bin/env.
This has been broken since commit be5347b ("httpd logs in a
"$httpd_only" subdirectory").
Since WEBrick has no other way of preserving environment
variables needed for gitweb, we create a shell script wrapper
that sets the environment variables as our CGI interpreter
to run gitweb.cgi.
* maint:
contrib/svn-fe: Add the svn-fe target to .gitignore
contrib/svn-fe: Fix IncludePath
Fix DIFF_QUEUE_CLEAR refactoring
git-gui: fix size and position of window panes on startup
git-gui: mc cannot be used before msgcat has been loaded
git-gui: use textconv filter for diff and blame
git-gui: Avoid using the <<Copy>> binding as a menu accelerator on win32
git-gui: fix shortcut creation on cygwin
git-gui: fix PATH environment for mingw development environment
git-gui: fix usage of _gitworktree when creating shortcut for windows
git-gui: fix "Explore Working Copy" for Windows again
git-gui: fix usage of themed widgets variable
git-gui: Handle failure of core.worktree to identify the working directory.
git-gui: check whether systems nice command works or disable it
* pt/git-gui:
git-gui: fix size and position of window panes on startup
git-gui: mc cannot be used before msgcat has been loaded
git-gui: use textconv filter for diff and blame
git-gui: Avoid using the <<Copy>> binding as a menu accelerator on win32
git-gui: fix shortcut creation on cygwin
git-gui: fix PATH environment for mingw development environment
git-gui: fix usage of _gitworktree when creating shortcut for windows
git-gui: fix "Explore Working Copy" for Windows again
git-gui: fix usage of themed widgets variable
git-gui: Handle failure of core.worktree to identify the working directory.
git-gui: check whether systems nice command works or disable it
The current description in the pull man page does not say much more
than that “git pull” is fetch + merge. Though that is all a person
needs to know in the end, it would be useful to summarize a bit about
what those commands do for new readers.
Most of this description is taken from the “git merge” docs.
Now that we explain how to back out of a failed merge (reset --merge),
we can tone down the warning against that a bit.
Except, as Thomas noticed, there’s a risk with that because people
might read this version of the manpage online and then conclude that
it is safe to try a merge with uncommitted changes, only to find that
their “git reset” doesn't support --merge yet. Or worse, verify that
their git-reset has --merge by a quick test (1b5b465 is in 1.6.2) but
then find that it does not help with backing out of a merge (e11d7b5
is only in 1.7.0!). So keep the warning.
With clarifications from Ævar, Thomas, and Junio.
Noticed-by: Geoff Russell <geoffrey.russell@gmail.com> Cc: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Cc: Thomas Rast <trast@student.ethz.ch> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
upload-pack: Improve error message when bad ref requested
When printing an error message saying a ref was requested that we do not
have, only print that ref, rather than the ref and everything sent to us
on the same packet line (e.g. protocol support specifications).
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The parser tried to clean up the object flags it used while finding
commits with matching string, but was not doing a very good job at it.
This caused "checkout -b new ':/token'", which internally tries to parse
':/token' twice as an object name, to fail when the commit in question
was reachable from only one ref.
The mask bits given to pop_most_recent_commit(&list, MASK) means "I have
already been on the list to be processed, so please do not place me again
even if I am found to be a parent of some other commit on the list." So
mark them when we add them to the list at the beginning.
* maint:
test-lib: Remove 3 year old no-op --no-python option
test-lib: Ignore --quiet under a TAP harness
Documentation/rev-parse: quoting is required with --parseopt
Documentation: reporting bugs
Fix git rebase --continue to work with touched files
Document ls-files -t as semi-obsolete.
test-lib: Remove 3 year old no-op --no-python option
The --no-python option was added to test-lib.sh by Johannes Schindelin
in early 2006 in abb7c7b3. It was later turned into a no-op by Junio C
Hamano in 7cdbff14 the same year.
Over three years is long enough before removing this old wart which
was retained for backwards compatibility. Our tests have been using
NO_PYTHON and "test_have_prereq PYTHON" for a long time now.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Running the tests with --quiet under a TAP harness will always fail,
since a TAP harness always needs actual test output to go along with
the plan that's being emitted.
Change the test-lib.sh to ignore the --quiet option under
HARNESS_ACTIVE to work around this. Then users that have --quiet in
their GIT_TEST_OPTS can run tests under prove(1) without everything
breaking.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Creating a variable nr here to use throughout the function only to change
refspec_nr to nr at the end, having not used refspec_nr the entire time,
is rather pointless. Instead, simply increment refspec_nr.
While at it, use ALLOC_GROW() instead of xrealloc().
Signed-off-by: Jared Hance <jaredhance@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
gitweb: allow configurations that change with each request
gitolite's contrib/gitweb/gitweb.conf includes:
$ENV{GL_USER} = $cgi->remote_user || "gitweb";
which is useful for setups where a user has to be authenticated
to access certain repos. Perhaps other typical configurations
change per session in other ways, too.
v1.7.2-rc2~6 (gitweb: Move evaluate_gitweb_config out of run_request,
2010-07-05) broke such configurations for a speedup, by loading
the configuration once per FastCGI process.
Probably in the end there should be a way to specify in the
configuration whether a particular installation wants the speedup or
the flexibility. But for now it is easier to just undo the relevant
change.
Reported-by: Julio Lajara <julio.lajara@alum.rpi.edu> Analysis-by: Jakub Narebski <jnareb@gmail.com> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* git://repo.or.cz/git-gui:
git-gui: fix size and position of window panes on startup
git-gui: mc cannot be used before msgcat has been loaded
git-gui: use textconv filter for diff and blame
git-gui: Avoid using the <<Copy>> binding as a menu accelerator on win32
git-gui: fix shortcut creation on cygwin
git-gui: fix PATH environment for mingw development environment
git-gui: fix usage of _gitworktree when creating shortcut for windows
git-gui: fix "Explore Working Copy" for Windows again
git-gui: fix usage of themed widgets variable
git-gui: Handle failure of core.worktree to identify the working directory.
git-gui: check whether systems nice command works or disable it
the outermost quoting is required, as otherwise all runs of arbitrary
whitespace inside the resulting 'set -- ...' call would be collapsed
into a single space.
This was exposed as a result of our new use of cat <<\EOF since 47e9cd2 (parseopt: wrap rev-parse --parseopt usage for eval
consumption, 2010-06-12), but has always been a problem when handling
arguments containing e.g. newlines.
Point this out in the documentation, and in particular correct the
example that did not have the quotes.
Noticed-by: Joshua Jensen <jjensen@workspacewhiz.com> Signed-off-by: Thomas Rast <trast@student.ethz.ch> Signed-off-by: Junio C Hamano <gitster@pobox.com>
It introduced a macro to reduce repeated assignments to three fields,
but an unrelated and incorrect change snuck in by mistake, which broke
commands like "git diff-files -p --submodule".
git-gui: fix size and position of window panes on startup
The themed panedwindow needs to have the sash position set after the
widget has been mapped therefore apply this setting in the Map event
binding. To avoid visible redraws as the application is constructed
the main window should be withdrawn until all the widgets have been added
Signed-off-by: Pat Thoyts <patthoyts@users.sourceforge.net>
Create a checkbox "Use Textconv For Diffs and Blame" in git-gui options.
If checked and if the driver for the concerned file exists, git-gui calls diff
and blame with --textconv option
Signed-off-by: Clément Poulain <clement.poulain@ensimag.imag.fr> Signed-off-by: Diane Gasselin <diane.gasselin@ensimag.imag.fr> Signed-off-by: Axel Bonnet <axel.bonnet@ensimag.imag.fr> Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Pat Thoyts <patthoyts@users.sourceforge.net>
git-gui: Avoid using the <<Copy>> binding as a menu accelerator on win32
On Windows the Control-C binding is used to copy and is mapped to the Tk
virtual event <<Copy>>. In the initial git-gui dialog this is also bound
as an accelerator for the Clone menu item. The effect is that both bindings
run, copying the text but resetting the clone page or switching to the clone
page when the user tries to copy text from one of the entry fields.
This patch avoids this by using Control-L instead for Windows only.
Signed-off-by: Pat Thoyts <patthoyts@users.sourceforge.net>
When the user tried to create a desktop icon with git gui on cygwin
wscript was complaining about an unknown option and displaying the
non-native path as such.
Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Pat Thoyts <patthoyts@users.sourceforge.net>
git-gui: fix PATH environment for mingw development environment
When creating a desktop shortcut from the gui the shortcut directly
starts wish with the git-gui script. In the msysgit development
environment some dll's reside in the mingw/bin directory which causes
that git can not start because libiconv2.dll is not found.
When using such a link the error is even more cryptic stating:
"child killed: unknown signal"
Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Pat Thoyts <patthoyts@users.sourceforge.net>
git-gui: fix "Explore Working Copy" for Windows again
It has already been fixed in commit 454efb47 (git-gui (Win): make
"Explore Working Copy" more robust, 2009-04-01), but has been broken in
commit 21985a11 (git-gui: handle non-standard worktree locations,
2010-01-23) by accidentally replacing too much with a new variable.
The problem can be reproduced when starting git-gui from within a
subdirectory. The solution is to convert the path name, explorer.exe is
invoked with, to a platform native name.
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de> Signed-off-by: Pat Thoyts <patthoyts@users.sourceforge.net>
Introduce a new option 'svn.pathnameencoding' that instructs git svn to
recode pathnames to a given encoding. It can be used by windows users
and by those who work in non-utf8 locales to avoid corrupted file names
with non-ascii characters.
[rp: renamed the option and added manpage documentation]
Signed-off-by: Dmitry Statyvka <dstatyvka@tmsoft-ltd.kiev.ua> Signed-off-by: Robert Pollak <robert.pollak@gmail.com> Acked-by: Eric Wong <normalperson@yhbt.net>
Attempting to mmap (via git-add or similar) a file larger than 4GB on
32-bit Linux systems results in a repository that has only the file
modulo 4GB stored, because of truncation of the off_t file size to a
size_t for mmap.
When xsize_t was introduced to handle this truncation in dc49cd7 (Cast
64 bit off_t to 32 bit size_t, 2007-03-06), Shawn even pointed out
that it should detect when such a cutoff happens.
Make it so.
Signed-off-by: Thomas Rast <trast@student.ethz.ch> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix git rebase --continue to work with touched files
When performing a non-interactive rebase, sometimes
"git rebase --continue" will fail if an unmodified file is
touched in the working directory:
You must edit all merge conflicts and then
mark them as resolved using git add
This is caused by "git diff-files" reporting a difference
between the index and the filesystem:
:100644 100644 d00491...... 000000...... M file
The fix is to run "git update-index --refresh" before
"git diff-files" as is done in git-rebase--interactive.
Signed-off-by: David D. Kilzer <ddkilzer@kilzer.net> Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The behavior of "git ls-files -t" is very misleading (see
http://thread.gmane.org/gmane.comp.version-control.git/126516 and
http://thread.gmane.org/gmane.comp.version-control.git/144394/focus=144397
for examples of mislead users) and badly documented, hence we point the
users to superior alternatives.
The feature is marked as "semi-obsolete" but not "scheduled for removal"
since it's a plumbing command, scripts might use it, and Git testsuite
already uses it to test the state of the index.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the SubmittingPatches recommendations to mention the 50
character soft limit on patch subject lines. 50 characters is the soft
limit mentioned in git-commit(1) and gittutorial(7), it's also the
point at which Gitweb, GitHub and various other Git front ends start
abbreviating the commit message.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
SubmittingPatches: Clarify the Signed-off-by rules
The wording of the Signed-off-by rules could be read as stating that
S-O-B should only be added when the submitter considered the patch
ready for inclusion in git.git.
We also want Signed-off-by to be used for e.g. RFC patches, in case
someone wants to dig an old patch out of the archive and improve
it. Change the wording to recommend a Signed-off-by for all submitted
patches.
The problem with the wording came up in the "[PATCH/RFC] Hacky version
of a glob() driven config include" thread[1]. Bert Wesarg suggested[2]
that it be removed to avoid confusion, which this change implements.
upload-pack: remove unused "create_full_pack" code in do_rev_list
A bit of history in chronological order, the newest at bottom:
- 80ccaa7 (upload-pack: Move the revision walker into a separate function.)
do_rev_list was introduced with create_full_pack argument
- 21edd3f (upload-pack: Run rev-list in an asynchronous function.)
do_rev_list was now called by start_async, create_full_pack was
passed by rev_list.data
- f0cea83 (Shift object enumeration out of upload-pack)
rev_list.data was now zero permanently. Creating full pack was
done by passing --all to pack-objects
- ae6a560 (run-command: support custom fd-set in async)
rev_list.data = 0 was found out redudant and got rid of.
Get rid of the code as well, for less headache while reading do_rev_list.
[jc: noticed by Elijah Newren]
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>