We have always been creating rfc1991 signatures for users with "rfc1991"
in their gpg config but failed to recognize them (tag -l -n largenumber)
and verify them (tag -v, verify-tag).
Make good use of the refactored signature detection and let us recognize
and verify those signatures also.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, git expects "-----BEGIN PGP SIGNATURE-----" at the beginning of a
signature. But gpg uses "MESSAGE" instead of "SIGNATURE" when used with
the "rfc1991" option. This leads to git's failing to verify it's own
signed tags, among other problems.
Add tests for all code paths (tag -v, tag -l -n largenumber, tag -f
without -m) where signature detection matters.
Reported-by: Stephan Hugel <urschrei@gmail.com> Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
If any strategy options are passed to -X, the strategy will always be
set to 'recursive'. According to the documentation, it should default to
'recursive' if it is not set, but it should be possible to set it to
other values.
This fixes a regression introduced in v1.7.3-rc0~67^2 (2010-07-29).
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
A stat-dirty index is not a detail that ought to concern the operator
of porcelain such as "git cherry-pick".
Without this change, a cherry-pick after copying a worktree with rsync
errors out with a misleading message.
$ git cherry-pick build/top
error: Your local changes to 'file.h' would be overwritten by merge. Aborting.
Please, commit your changes or stash them before you can merge.
Noticed-by: Pete Wyckoff <pw@padd.com> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
apply: handle patches with funny filename and colon in timezone
Some patches have a timezone formatted like '-08:00' instead of
'-0800' in their ---/+++ lines (e.g. http://lwn.net/Articles/131729/).
Take this into account when searching for the start of the timezone
(which is the end of the filename).
This does not actually affect the outcome of patching unless (1) a
file being patched has a non-' ' whitespace character (e.g., tab) in
its filename, or (2) the patch is whitespace-damaged, so the tab
between filename and timestamp has been replaced with spaces.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous text was not exactly accurate; it is OK to
change space and minus lines, but only in certain ways.
This patch takes a whole new approach, which is to describe
the sorts of conceptual operations you might want to
perform. It also includes a healthy dose of warnings about
how things can go wrong.
Since the size of the text is getting quite long, it also
splits this out into an "editing patches" section. This
makes more sense with the current structure, anyway, which
already splits out the interactive mode description.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use test_might_fail instead of ignoring the exit status from git
config --unset, and let the exit status propagate past rm -f (which
does not fail on ENOENT). Otherwise bugs that lead git config to
crash would not be detected when this test runs.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a comment describing the setup in t3404 to its --help output.
This should make it easier to decide where to put new functions
without disrupting the flow of the file or obstructing the description
of the test setup.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow test_commit failures in loop iterations before the last one to
cause the test assertion to fail.
More importantly, avoiding these loops makes the test a little
simpler to read and decreases the vertical screen footprint of
the setup test assertion by one line.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the test_expect_code helper instead of open-coding it.
The main behavior change is to print the command and actual exit
status when the test fails. More importantly, this would make it
easier to add commands before "git notes show" as part of the
same test assertion if needed.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a gitcommand dies due to a segfault, test_must_fail
diagnoses it as an error; "! git <command>" treats it as
just another expected failure, which would let such a bug
go unnoticed.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t1502 (rev-parse --parseopt): test exit code from "-h"
rev-parse --parseopt exits with code 129 (usage error) when asked
to dump usage with -h on behalf of another command. Scripts can
take advantage of this to avoid trying to parse usage information
as though it were the regular output from some git command.
Noticed with an &&-chaining tester.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t6022 (renaming merge): chain test commands with &&
Using 'return' in an attempt to end a test assertion can have
unpredictable results (probably escaping from test_run_ and breaking
its bookkeeping). Redo the control flow using helpers like
test_expect_code and git diff --exit-code, so each test assertion can
follow the usual form
command that should succeed &&
command that should succeed &&
command that should succeed &&
...
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
rebase: better rearranging of fixup!/squash! lines with --autosquash
The current behvaior of --autosquash can duplicate fixup!/squash! lines
if they match multiple commits, and it can also apply them to commits
that come after them in the todo list. Even more oddly, a commit that
looks like "fixup! fixup!" will match itself and be duplicated in the
todo list.
Change the todo list rearranging to mark all commits as used as soon
as they are emitted, and to avoid emitting a fixup/squash commit if the
commit has already been marked as used.
Signed-off-by: Kevin Ballard <kevin@sb.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git's diff machinery has supported a -s (silence diff output) option
as far back as v0.99~900 (Silent flag for show-diff, 2005-04-13), but
the option is only advertised in an odd corner of the git diff-tree
manual.
The main use is to retrieve basic metadata about a commit:
git show -s rev
Explain this in the 'git log' manual and provide an example in the
'git show' examples section. This is kind of a cop-out, since it
would be more useful to explain it in the 'git show' manual proper,
which says:
The command takes options applicable to the git
diff-tree command to control how the changes the
commit introduces are shown.
This manual page describes only the most frequently
used options.
Fixing that is a larger task for another day.
Reported-by: Will Hall <will@gnatter.net> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
According to the documentation for git-status, in short-format mode,
paths with spaces or unprintable characters are quoted. However 28fba29 (Do not quote SP., 2005-10-17) removed the behavior that quotes
paths that have spaces but not unprintable characters. Unfortunately this
makes the output of `git status --porcelain` non-parseable in certain
(rather unusual) edge cases. In the interest of removing ambiguity when
parsing the output of `git status --porcelain`, restore the behavior of
quoting paths with spaces in git-status's short-format mode.
Signed-off-by: Kevin Ballard <kevin@sb.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
dir.c: fix EXC_FLAG_MUSTBEDIR match in sparse checkout
Commit c84de70 (excluded_1(): support exclude files in index -
2009-08-20) tries to work around the fact that there is no
directory/file information in index entries, therefore
EXC_FLAG_MUSTBEDIR match would fail.
Unfortunately the workaround is flawed. This fixes it.
Reported-by: Thomas Rinderknecht <thomasr@sailguy.org> Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix the case when the patch is a rename or mode-change only
and -p is used with a value greater than one.
The git_header_name function did not remove more than one path
component.
Signed-off-by: Federico Cuello <fedux@lugmen.org.ar> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t9001: send-email interation with --in-reply-to and --chain-reply-to
1. When --in-reply-to gives $reply_to, the first one becomes a reply to
that message, with or without --chain-reply-to.
2. When --chain-reply-to is in effect, all the messages are strung
together to form a single chain. The first message may be in reply to
the $reply_to given by --in-reply-to command line option (see
previous), or the root of the discussion thread. The second one is a
response to the first one, and the third one is a response to the
second one, etc.
3. When --chain-reply-to is not in effect:
a. When --in-reply-to is used, too, the second and the subsequent ones
become replies to $reply_to. Together with the first rule, all
messages become replies to $reply_to given by --in-reply-to.
b. When --in-reply-to is not used, presumably the second and
subsequent ones become replies to the first one, which would be the
root.
The documentation is reasonably clear about the 1., 2. and 3a. above, I
think, even though I do not think 3b. is clearly specified.
The two tests added by this patch at least documents what happens between
these two options.
* 'master' of git://repo.or.cz/git-gui:
git-gui: apply color information from git diff output
git-gui: use wordprocessor tab style to ensure tabs work as expected
git-gui: correct assignment of work-tree
git-gui: use full dialog width for old name when renaming branch
git-gui: generic version trimming
git-gui: enable the Tk console when tracing/debugging on Windows
git-gui: show command-line errors in a messagebox on Windows
On Windows, avoid git-gui to call Cygwin's nice utility
clone: Add the --recurse-submodules option as alias for --recursive
Since 1.6.5 "git clone" honors the --recursive option to recursively check
out submodules too. As this option can easily be misinterpreted when it is
added to other commands like "git grep", add the new --recurse-submodules
option as an alias for --recursive so the same option can be used for all
commands recursing into submodules.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is an oversimplification to say that we can take
"[<commit> [<commit>]]", as it really depends on what
options have been given. Instead, let's list the major modes
of operation separately, as we do in other manpages.
This patch also adjusts the text immediately after the
synopsis to match the lines given in the synopsis.
For git-difftool, which has the same issue, let's refer the
user to the git-diff manpage rather than spelling it all out
again.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Windows does not supply the POSIX-functions fork(), setuuid(), setgid(),
setsid() and initgroups(). Error out if --user or --detach is specified
when if so.
MinGW doesn't have prototypes and headers for inet_ntop and inet_pton,
so include our implementation instead. MSVC does, so avoid doing so
there.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Windows's accept()-function takes the last argument as an int, but glibc
takes an unsigned int. Use socklen_t to get rid of a warning. This is
basically a revert of 7fa0908, but we have already been depending on
socklen_t existing since June 2006 (commit 5b276ee4). I guess this means
that socklen_t IS defined on OSX after all - at least in recent headers.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Get remote host in the process that accept() and pass it through
the REMOTE_ADDR environment variable to the handler-process.
Introduce the REMOTE_PORT environmen variable for the port.
Use these variables for reporting instead of doing
getpeername(0, ...), which doesn't work on Windows.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Windows doesn't support line buffered mode for file
streams, so let's just use full buffered mode with
a big buffer ("4096 should be enough for everyone")
and add explicit flushing.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
fork() is only available on POSIX, so to support git-daemon
on Windows we have to use something else.
Instead we invent the flag --serve, which is a stripped down
version of --inetd-mode. We use start_command() to call
git-daemon with this flag appended to serve clients.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Windows port have so far been using process handles in place
of PID. However, this is not work consistent with what getpid
returns.
PIDs are system-global identifiers, but process handles are local
to a process. Using PIDs instead of process handles allows, for
instance, a user to kill a hung process with the Task Manager,
something that would have been impossible with process handles.
Change the code to use the real PID, and use OpenProcess to get a
process-handle. Store the PID and the process handle in a linked
list protected by a critical section, so we can safely close the
process handle later.
Linked list code written by Pat Thoyts.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com> Signed-off-by: Pat Thoyts <patthoyts@users.sourceforge.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Syslog does not usually exist on Windows, so implement our own using
Window's ReportEvent mechanism.
Strings containing "%1" gets expanded into them selves by ReportEvent,
resulting in an unreadable string. "%2" and above is not a problem.
Unfortunately, on Windows an IPv6 address can contain "%1", so expand
"%1" to "% 1" before reporting. "%%1" is also a problem for ReportEvent,
but that string cannot occur in an IPv6 address.
Signed-off-by: Mike Pape <dotzenlabs@gmail.com> Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-daemon requires some socket-functionality that is not yet
supported in the Windows-port. This patch adds said functionality,
and makes sure WSAStartup gets called by socket(), since it is the
first network-call in git-daemon.
Signed-off-by: Mike Pape <dotzenlabs@gmail.com> Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t7500: test expected behavior of commit --squash
t3415: test interaction of commit --squash with rebase --autosquash
t3900: test commit --squash with i18n encodings
Signed-off-by: Pat Notz <patnotz@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
commit: --squash option for use with rebase --autosquash
This option makes it convenient to construct commit messages for use
with 'rebase --autosquash'. The resulting commit message will be
"squash! ..." where "..." is the subject line of the specified commit
message. This option can be used with other commit message options
such as -m, -c, -C and -F.
If an editor is invoked (as with -c or -eF or no message options) the
commit message is seeded with the correctly formatted subject line.
t7500: test expected behavior of commit --fixup
t3415: test interaction of commit --fixup with rebase --autosquash
t3900: test commit --fixup with i18n encodings
Signed-off-by: Pat Notz <patnotz@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
commit: --fixup option for use with rebase --autosquash
This option makes it convenient to construct commit messages for use
with 'rebase --autosquash'. The resulting commit message will be
"fixup! ..." where "..." is the subject line of the specified commit
message.
Example usage:
$ git commit --fixup HEAD~2
Signed-off-by: Pat Notz <patnotz@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
pretty.c: teach format_commit_message() to reencode the output
format_commit_message() will now reencode the content if the desired
output encoding is different from the encoding in the passed in
commit. Callers wanting to specify the output encoding do so via the
pretty_print_context struct.
Signed-off-by: Pat Notz <patnotz@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
submodule: only preserve flags across recursive status/update invocations
Recursive invocations of submodule update/status preserve all arguments,
so executing
git submodule update --recursive -- foo
attempts to recursively update a submodule named "foo".
Naturally, this fails as one cannot have an infinitely-deep stack of
submodules each containing a submodule named "foo". The desired behavior
is instead to update foo and then recursively update all submodules
inside of foo.
This commit accomplishes that by only saving the flags for use in the
recursive invocation.
Signed-off-by: Kevin Ballard <kevin@sb.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
c5022f57 (git-blame.el: Change how blame information is shown,
2009-09-29) taught the "M-x git-blame" mode to format its output
in a more interesting way, making use of the format-spec function.
format-spec is included in Emacs 23 and is a useful function.
Older emacsen can get it from Gnus. In all emacsen, we need
to 'require it before use to avoid warnings:
git-blame.el:483:1:Warning: the function `format-spec' is not known to be
defined.
Reported-by: Sergei Organov <osv@javad.com> Reported-by: Kevin Ryde <user42@zip.com.au> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Work around EMFILE when there are too many pack files
When opening any files in the object database, release unused pack
windows if the open(2) syscall fails due to EMFILE (too many open
files in this process). This allows Git to degrade gracefully on
a repository with thousands of pack files, and a commit stored in
a loose object in the middle of the history.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
This utility function avoids an unnecessary update of the access time
for a loose object file. Just as the atime isn't useful on a loose
object, its not useful on the pack or the corresonding idx file.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
A loose object is not corrupt if it cannot be read due to EMFILE
"git fsck" bails out with a claim that a loose object that cannot be
read but exists on the filesystem to be corrupt, which is wrong when
read_object() failed due to e.g. EMFILE.
read_sha1_file(): report correct name of packfile with a corrupt object
Clarify the error reporting logic by moving the normal codepath (i.e. we
read the object we wanted to read correctly) up and return early.
The logic to report the name of the packfile with a corrupt object,
introduced by e8b15e6 (sha1_file: Show the the type and path to corrupt
objects, 2010-06-10), was totally bogus. The function that knows which
bad object came from what packfile is has_packed_and_bad(); make it report
which packfile the problem was found.
"Corrupt" is already an adjective, e.g. an object is "corrupt"; we do not
have to say "corrupted object".
user-manual: remote-tracking can be checked out, with detached HEAD
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
user-manual.txt: explain better the remote(-tracking) branch terms
Now that the documentation is mostly consistant in the use of "remote
branch" Vs "remote-tracking branch", let's make this distinction explicit
early in the user-manual.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change incorrect "remote branch" to "remote tracking branch" in C code
(Just like we did for documentation already)
In the process, we change "non-remote branch" to "branch outside the
refs/remotes/ hierarchy" to avoid the ugly "non-remote-tracking branch".
The new formulation actually corresponds to how the code detects this
case (i.e. prefixcmp(refname, "refs/remotes")).
Also, we use 'remote-tracking branch' in generated merge messages (by
merge an fmt-merge-msg).
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change incorrect uses of "remote branch" meaning "remote-tracking"
"remote branch" is a branch hosted in a remote repository, while
"remote-tracking branch" is a copy of such branch, hosted locally.
The distinction is subtle when the copy is up-to-date, but rather
fundamental to understand what "git fetch" and "git push" do.
This patch should fix all incorrect usages in Documentation/ directory.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change "tracking branch" to "remote-tracking branch"
One more step towards consistancy. We change the documentation and the C
code in a single patch, since the only instances in the C code are in
comment and usage strings.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Better "Changed but not updated" message in git-status
Older Gits talked about "updating" a file to add its content to the
index, but this terminology is confusing for new users. "to stage" is far
more intuitive and already used in e.g. the "git stage" command name.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
apply: don't segfault on binary files with missing data
Usually when applying a binary diff generated without
--binary, it will be rejected early, as we don't even have
the full sha1 of the pre- and post-images.
However, if the diff is generated with --full-index (but not
--binary), then we will actually try to apply it. If we have
the postimage blob, then we can take a shortcut and never
even look at the binary diff at all (e.g., this can happen
when rebasing changes within a repository).
If we don't have the postimage blob, though, we try to look
at the actual fragments, of which there are none, and get a
segfault. This patch checks explicitly for that case and
complains to the user instead of segfaulting. We need to
keep the check at a low level so that the "shortcut" case
above continues to work.
We also add a test that demonstrates the segfault. While
we're at it, let's also explicitly test the shortcut case.
Reported-by: Rafaël Carré <rafael.carre@gmail.com> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
6df42ab (Add global and system-wide gitattributes, 2010-09-01) forgot
to quote one instance of $HOME in the tests. This would be valid
according to POSIX, but bash 4 helpfully declines to execute the
command in question with an "ambiguous redirection" error.
Signed-off-by: Thomas Rast <trast@student.ethz.ch> Signed-off-by: Junio C Hamano <gitster@pobox.com>
contrib/ciabot: git-describe commit instead of HEAD
For each commit a shorter version of the name will be generated. This is
either the truncated hash or the output of git-describe. The
call to git-describe was only made with an empty shell variable instead
of an actual commit hash. Thus it only described the current HEAD and
not each commit we want to submit to cia.vc.
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Inside an element of an enumerated list, the second and subsequent
paragraphs need to lose their indent and have to be strung together with a
line with a single '+' on it instead. Otherwise the lines below are shown
in typewriter face, which just looks wrong.
Signed-off-by: Nathan W. Panike <nathan.panike@gmail.com> Reviewed-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* add required build options to Makefile.
* introduce new NO_INTTYPES_H for systems lacking inttypes; code
includes stdint.h instead, if this is set.
* introduce new NO_SYS_POLL_H for systems lacking sys/poll.h; code
includes poll.h instead, if this is set.
* introduce NO_INITGROUPS. initgroups() call is simply omitted.
Signed-off-by: Markus Duft <mduft@gentoo.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
core.abbrevguard: Ensure short object names stay unique a bit longer
Even though git makes sure that it uses enough hexdigits to show an
abbreviated object name unambiguously, as more objects are added to the
repository over time, a short name that used to be unique will stop being
unique. Git uses this many extra hexdigits that are more than necessary
to make the object name currently unique, in the hope that its output will
stay unique a bit longer.
When git checkout -p from the index or HEAD is run in edit mode, the
help message about removing '-' and '+' lines was backwards. Because it
is reverse applying the patch, the meanings of '-' and '+' are reversed.
Signed-off-by: Jonathan "Duke" Leto <jonathan@leto.net> Acked-by: Thomas Rast <trast@student.ethz.ch> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Although Git interally has the facility to differentiate between
porcelain and plubmbing commands and appropriately print errors,
several shell scripts invoke plubming commands triggering cryptic
plumbing errors to be displayed on a porcelain interface. This patch
replaces the "needs update" message in git-pull and git-rebase, when
`git update-index` is run, with a more friendly message.
Reported-by: Joshua Jensen <jjensen@workspacewhiz.com> Reported-by: Thore Husfeldt <thore.husfeldt@gmail.com> Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
completion: fix zsh check under bash with 'set -u'
Commit 06f44c3 (completion: make compatible with zsh) broke bash
compatibility with 'set -u': a warning was generated when checking
$ZSH_VERSION. The solution is to supply a default value, using
${ZSH_VERSION-}. Thanks to SZEDER Gábor for the fix.
Signed-off-by: Mark Lodato <lodatom@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-gui: apply color information from git diff output
This patch extracts the ANSI color sequences from git diff output and
applies these to the diff view window. This ensures that the gui view
makes use of the current git configuration for whitespace display.
ANSI codes may include attributes, foreground and background in a single
sequence. Handle this and support bold and reverse attributes. Ignore
all other attributes.
Suggested-by: Tor Arvid Lund <torarvid@gmail.com> Suggested-by: Junio C Hamano <gitster@pobox.com> Tested-by: Tor Arvid Lund <torarvid@gmail.com> Signed-off-by: Pat Thoyts <patthoyts@users.sourceforge.net>
git-gui: use wordprocessor tab style to ensure tabs work as expected
The Tk text widget tab style is tabular where the first tab will align to
the first tabstop and if that position is left of the current location
then just a single character space is used. With the wordprocessor style
a tab moves the next character position to the next rightmost tabstop
as expected for viewing code.
Signed-off-by: Pat Thoyts <patthoyts@users.sourceforge.net>
* ab/send-email-perl:
send-email: extract_valid_address use qr// regexes
send-email: is_rfc2047_quoted use qr// regexes
send-email: use Perl idioms in while loop
send-email: make_message_id use "require" instead of "use"
send-email: send_message die on $!, not $?
send-email: use (?:) instead of () if no match variables are needed
send-email: sanitize_address use qq["foo"], not "\"foo\""
send-email: sanitize_address use $foo, not "$foo"
send-email: use \E***\Q instead of \*\*\*
send-email: cleanup_compose_files doesn't need a prototype
send-email: unique_email_list doesn't need a prototype
send-email: file_declares_8bit_cte doesn't need a prototype
send-email: get_patch_subject doesn't need a prototype
send-email: use lexical filehandles during sending
send-email: use lexical filehandles for $compose
send-email: use lexical filehandle for opendir
* dm/mergetool-vimdiff:
mergetool-lib: make the three-way diff the default for vim/gvim
mergetool-lib: add a three-way diff view for vim/gvim
mergetool-lib: combine vimdiff and gvimdiff run blocks