worktree: prepare for more checks of whether path can become worktree
Certain conditions must be met for a path to be a valid candidate as the
location of a new worktree; for instance, the path must not exist or
must be an empty directory. Although the number of conditions is small,
new conditions will soon be added so factor out the existing checks into
a separate function to avoid further bloating add_worktree().
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
worktree: generalize delete_git_dir() to reduce code duplication
prune_worktrees() and delete_git_dir() both remove worktree
administrative entries from .git/worktrees, and their implementations
are nearly identical. The only difference is that prune_worktrees() is
also capable of removing a bogus non-worktree-related file from
.git/worktrees.
Simplify by extending delete_git_dir() to handle the little bit of
extra functionality needed by prune_worktrees(), and drop the
effectively duplicate code from the latter.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
worktree: don't die() in library function find_worktree()
Callers don't expect library function find_worktree() to die(); they
expect it to return the named worktree if found, or NULL if not.
Although find_worktree() itself never invokes die(), it calls
real_pathdup() with 'die_on_error' incorrectly set to 'true', thus will
die() indirectly if the user-provided path is not to real_pathdup()'s
liking. This can be observed, for instance, with any git-worktree
command which searches for an existing worktree:
$ git worktree unlock foo
fatal: 'foo' is not a working tree
$ git worktree unlock foo/bar
fatal: Invalid path '.../foo': No such file or directory
The first error message is the expected one from "git worktree unlock"
not finding the specified worktree; the second is from find_worktree()
invoking real_pathdup() incorrectly and die()ing prematurely.
Aside from the inconsistent error message between the two cases, this
bug hasn't otherwise been a serious problem since existing callers all
die() anyhow when the worktree can't be found. However, that may not be
true of callers added in the future, so fix find_worktree() to avoid
die()ing.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Partially revert the support for multiple hash functions to regain
hash comparison performance; we'd think of a way to do this better
in the next cycle.
* sg/test-must-be-empty:
tests: use 'test_must_be_empty' instead of 'test_cmp <empty> <out>'
tests: use 'test_must_be_empty' instead of 'test_cmp /dev/null <out>'
tests: use 'test_must_be_empty' instead of 'test ! -s'
tests: use 'test_must_be_empty' instead of '! test -s'
* rs/opt-updates:
parseopt: group literal string alternatives in argument help
remote: improve argument help for add --mirror
checkout-index: improve argument help for --stage
"git help --config" (which is used in command line completion)
missed the configuration variables not described in the main
config.txt file but are described in another file that is included
by it, which has been corrected.
* nd/complete-config-vars:
generate-cmdlist.sh: collect config from all config.txt files
"git branch --list" learned to take the default sort order from the
'branch.sort' configuration variable, just like "git tag --list"
pays attention to 'tag.sort'.
* sm/branch-sort-config:
branch: support configuring --sort via .gitconfig
range-diff: update stale summary of --no-dual-color
275267937b (range-diff: make dual-color the default mode, 2018-08-13)
replaced --dual-color with --no-dual-color but left the option's
summary untouched. Rewrite the summary to describe --no-dual-color
rather than dual-color.
Helped-by: Jonathan Nieder <jrnieder@gmail.com> Helped-by: Johannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: Kyle Meyer <kyle@kyleam.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The core.commitGraph config setting was accidentally removed from
the config documentation. In that same patch, the config setting
that writes a commit-graph during garbage collection was incorrectly
written to the doc as "gc.commitGraph" instead of "gc.writeCommitGraph".
Reported-by: Szeder Gábor <szeder.dev@gmail.com> Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t/lib-rebase.sh: support explicit 'pick' commands in 'fake_editor.sh'
The verbose output of the test 'reword without issues functions as
intended' in 't3423-rebase-reword.sh', added in a9279c6785 (sequencer:
do not squash 'reword' commits when we hit conflicts, 2018-06-19),
contains the following error output:
sed: -e expression #1, char 2: extra characters after command
This error comes from within the 'fake-editor.sh' script created by
'lib-rebase.sh's set_fake_editor() function, and the root cause is the
FAKE_LINES="pick 1 reword 2" variable in the test in question, in
particular the "pick" word. 'fake-editor.sh' assumes 'pick' to be the
default rebase command and doesn't support an explicit 'pick' command
in FAKE_LINES. As a result, 'pick' will be used instead of a line
number when assembling the following 'sed' script:
sed -n picks/^pick/pick/p
which triggers the aforementioned error.
Luckily, this didn't affect the test's correctness: the erroring 'sed'
command doesn't write anything to the todo script, and processing the
rest of FAKE_LINES generates the desired todo script, as if that
'pick' command were not there at all.
The minimal fix would be to remove the 'pick' word from FAKE_LINES,
but that would leave us susceptible to similar issues in the future.
Instead, teach the fake-editor script to recognize an explicit 'pick'
command, which is still a fairly trivial change.
In the future we might want to consider reinforcing this fake editor
script with an &&-chain and stricter parsing of the FAKE_LINES
variable (e.g. to error out when encountering unknown rebase commands
or commands and line numbers in the wrong order).
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Prior to 509f6f62a4 (cache: update object ID functions for
the_hash_algo, 2018-07-16), hashcmp() called memcmp() with a
constant size of 20 bytes. Some compilers were able to turn
that into a few quad-word comparisons, which is faster than
actually calling memcmp().
In 509f6f62a4, we started using the_hash_algo->rawsz
instead. Even though this will always be 20, the compiler
doesn't know that while inlining hashcmp() and ends up just
generating a call to memcmp().
Eventually we'll have to deal with multiple hash sizes, but
for the upcoming v2.19, we can restore some of the original
performance by asserting on the size. That gives the
compiler enough information to know that the memcmp will
always be called with a length of 20, and it performs the
same optimization.
Here are numbers for p0001.2 run against linux.git on a few
versions. This is using -O2 with gcc 8.2.0.
Test v2.18.0 v2.19.0-rc0 HEAD
------------------------------------------------------------------------------
0001.2: 34.24(33.81+0.43) 34.83(34.42+0.40) +1.7% 33.90(33.47+0.42) -1.0%
You can see that v2.19 is a little slower than v2.18. This
commit ended up slightly faster than v2.18, but there's a
fair bit of run-to-run noise (the generated code in the two
cases is basically the same). This patch does seem to be
consistently 1-2% faster than v2.19.
I tried changing hashcpy(), which was also touched by 509f6f62a4, in the same way, but couldn't measure any
speedup. Which makes sense, at least for this workload. A
traversal of the whole commit graph requires looking up
every entry of every tree via lookup_object(). That's many
multiples of the numbers of objects in the repository (most
of the lookups just return "yes, we already saw that
object").
[jn: verified using "make object.s" that the memcmp call goes away.]
Reported-by: Derrick Stolee <stolee@gmail.com> Signed-off-by: Jeff King <peff@peff.net Reviewed-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t3420-rebase-autostash: don't try to grep non-existing files
Several tests in 't3420-rebase-autostash.sh' start various rebase
processes that are expected to fail because of merge conflicts. These
tests then run '! grep' to ensure that the autostash feature did its
job, and the dirty contents of a file is gone. However, due to the
test repo's history and the choice of upstream branch that file
shouldn't exist in the conflicted state at all. Consequently, this
'grep' doesn't fail as expected, because it can't find the dirty
content, but it fails because it can't open the file.
Tighten this check by using 'test_path_is_missing' instead, thereby
avoiding unexpected errors from 'grep' as well.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test 'store updates stash ref and reflog' in 't3903-stash.sh'
creates a stash from a new file, runs 'git reset --hard' to throw away
any modifications to the work tree, and then runs '! grep' to ensure
that the staged contents are gone. Since the file didn't exist
before, it shouldn't exist after 'git reset' either. Consequently,
this 'grep' doesn't fail as expected, because it can't find the staged
content, but it fails because it can't open the file.
Tighten this check by using 'test_path_is_missing' instead, thereby
avoiding an unexpected error from 'grep' as well.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Prior to d3c6751b18 (tests: make use of the test_must_be_empty
function, 2018-07-27), in the test 'rev-list should succeed with empty
output on empty stdin' in 't6018-rev-list-glob' the empty 'expect'
file served dual purpose: besides specifying the expected output, as
usual, it also served as empty input for 'git rev-list --stdin'.
Then d3c6751b18 came along, and, as part of the conversion to
'test_must_be_empty', removed this empty 'expect' file, not realizing
its secondary purpose. Redirecting stdin from the now non-existing
file failed the test, but since this test expects failure in the first
place, this issue went unnoticed.
Redirect 'git rev-list's stdin explicitly from /dev/null to provide
empty input. (Strictly speaking we don't need this redirection,
because the test script's stdin is already redirected from /dev/null
anyway, but I think it's better to be explicit about it.)
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test ' context does not include preceding empty lines' in the
block of tests 'change with long common tail and no context' in
't4051-diff-function-context.sh' tries to read the file
'long_common_tail.diff.diff', but that file doesn't exist as its name
contains one more '.diff' suffixes than necessary.
Despite this error the test still succeeded without checking what it's
supposed to, because this erroneous read is done on the line:
test "$(first_context_line <long_common_tail.diff.diff)" != " "
which means that:
- the command substitution hides the error, so it won't fail the
test, and
- the result of the command substitution is the empty string, which
is, of course, not equal to a single space character, so the
condition is fulfilled, and the test succeeds.
As a minimal fix, fix the name of the file to be read.
In the future we might want to reorganize this test script (1) to use
'test_cmp' instead of 'test's and command substitutions to catch
failing commands and to provide helpful error messages, and (2) to
specify what the expected result actually _is_ instead of what it
isn't.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the test 'checkout with autocrlf=input' in 't0020-crlf.sh', one of
the 'has_cr' checks looks at the non-existing file 'two' instead of
'dir/two'. The test still succeeds, without actually checking what it
was supposed to, because this check is expected to fail anyway.
As a minimal fix, fix the name of the file to be checked.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test '--dry-run with conflicts fixed from a merge' in
't7501-commit.sh', added in 8dc874b2ee (wt-status.c: set commitable
bit if there is a meaningful merge., 2016-02-15), runs the following
unnecessary and downright bogus command substitution:
! $(git merge --no-commit commit-1) &&
I.e. after 'git merge ...' is executed and expectedly fails, the test
attempts to execute its output:
Merging: 80f2ea2 commit 2
virtual commit-1
found 1 common ancestor: e60d113 Initial commit
Auto-merging test-file
CONFLICT (content): Merge conflict in test-file
Automatic merge failed; fix conflicts and then commit the result.
as a command, which most likely fails, because there is no such
command as "Merging:". Then '!' negates the failed exit status, the
test continues, and eventually succeeds.
Remove this command substitution and use 'test_must_fail' to ensure
that 'git merge' fails.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The author_date_slab is used to store the author date of a commit
when walking with the --author-date flag in rev-list or log. This
was added as an 'unsigned long' in
Since 'unsigned long' is ambiguous in its bit-ness across platforms
(64-bit in Linux, 32-bit in Windows, for example), most references
to the author dates in commit.c were converted to timestamp_t in
dddbad72 "timestamp_t: a new data type for timestamps"
However, the slab definition was missed, leading to a mismatch in
the data types in Windows. This would not reveal itself as a bug
unless someone authors a commit after February 2106, but commits
can store anything as their author date.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test-tool programs include "test-tool.h" as their first
include, which breaks our CodingGuideline of "the first
include must be git-compat-util.h or an equivalent".
Rather than change them all, let's instead make test-tool.h
one of those equivalents, just like we do for builtin.h
(which many of the actual git builtins include first).
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
tests: use 'test_must_be_empty' instead of 'test_cmp <empty> <out>'
Using 'test_must_be_empty' is shorter and more idiomatic than
>empty &&
test_cmp empty out
as it saves the creation of an empty file. Furthermore, sometimes the
expected empty file doesn't have such a descriptive name like 'empty',
and its creation is far away from the place where it's finally used
for comparison (e.g. in 't7600-merge.sh', where two expected empty
files are created in the 'setup' test, but are used only about 500
lines later).
These cases were found by instrumenting 'test_cmp' to error out the
test script when it's used to compare empty files, and then converted
manually.
Note that even after this patch there still remain a lot of cases
where we use 'test_cmp' to check empty files:
- Sometimes the expected output is not hard-coded in the test, but
'test_cmp' is used to ensure that two similar git commands produce
the same output, and that output happens to be empty, e.g. the
test 'submodule update --merge - ignores --merge for new
submodules' in 't7406-submodule-update.sh'.
- Repetitive common tasks, including preparing the expected results
and running 'test_cmp', are often extracted into a helper
function, and some of this helper's callsites expect no output.
- For the same reason as above, the whole 'test_expect_success'
block is within a helper function, e.g. in 't3070-wildmatch.sh'.
- Or 'test_cmp' is invoked in a loop, e.g. the test 'cvs update
(-p)' in 't9400-git-cvsserver-server.sh'.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
tests: use 'test_must_be_empty' instead of 'test ! -s'
Using 'test_must_be_empty' is preferable to 'test ! -s', because it
gives a helpful error message if the given file is unexpectedly no
empty, while the latter remains completely silent. Furthermore, it
also catches cases when the given file unexpectedly does not exist at
all.
This patch was created by:
sed -i -e 's/test ! -s/test_must_be_empty/' t[0-9]*.sh
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
tests: use 'test_must_be_empty' instead of '! test -s'
Using 'test_must_be_empty' is preferable to '! test -s', because it
gives a helpful error message if the given file is unexpectedly not
empty, while the latter remains completely silent. Furthermore, it
also catches cases when the given file unexpectedly does not exist at
all.
This patch was basically created by:
sed -i -e 's/! test -s/test_must_be_empty/' t[0-9]*.sh
with the following notable exceptions:
- The '! test -s' check in '.gitmodules ignore=dirty suppresses
submodules with untracked content' in 't7508-status.sh' is left
as-is, because it's bogus and, therefore, it's subject of a
dedicated patch.
- The '! test -s' checks in 't9131-git-svn-empty-symlink.sh' and
't9135-git-svn-moved-branch-empty-file.sh' are immediately
preceeded by a 'test -f' to ensure that the files exist in the
first place. 'test_must_be_empty' ensures that as well, so those
'test -f' commands are removed as well.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Group the possible values using a pair of parentheses and don't mark
them for translation, as they are literal strings that have to be used
as-is in any locale.
Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Spell out all alternatives and avoid using a numerical range operator,
as it is not mentioned in CodingGuidelines and the resulting string is
still concise. Wrap them in parentheses to document clearly that the
"--stage=" part is common among them.
Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
generate-cmdlist.sh: collect config from all config.txt files
This script uses Documentation/config.txt as input for "git help
--config" and "git config" completion but it misses the fact that
config.txt includes other txt files. Include all *config.txt as input
when scanning for config keys. This could produce false positives, but
as long as we stick to the blah-config.txt naming convention, we
should be ok.
While at there, move diff.* from config.txt to diff-config.txt where
all other diff config keys are.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git cherry-pick --quit" failed to remove CHERRY_PICK_HEAD even
though we won't be in a cherry-pick session after it returns, which
has been corrected.
* nd/cherry-pick-quit-fix:
cherry-pick: fix --quit not deleting CHERRY_PICK_HEAD
When "git rebase -i" is told to squash two or more commits into
one, it labeled the log message for each commit with its number.
It correctly called the first one "1st commit", but the next one
was "commit #1", which was off-by-one. This has been corrected.
* pw/rebase-i-squash-number-fix:
rebase -i: fix numbering in squash message
Recent update to "git config" broke updating variable in a
subsection, which has been corrected.
* sb/config-write-fix:
git-config: document accidental multi-line setting in deprecated syntax
config: fix case sensitive subsection names on writing
t1300: document current behavior of setting options
* en/incl-forward-decl:
Remove forward declaration of an enum
compat/precompose_utf8.h: use more common include guard style
urlmatch.h: fix include guard
Move definition of enum branch_track from cache.h to branch.h
alloc: make allocate_alloc_state and clear_alloc_state more consistent
Add missing includes and forward declarations
After a partial clone, repeated fetches from promisor remote would
have accumulated many packfiles marked with .promisor bit without
getting them coalesced into fewer packfiles, hurting performance.
"git repack" now learned to repack them.
* jt/repack-promisor-packs:
repack: repack promisor objects if -a or -A is set
repack: refactor setup of pack-objects cmd
A test prerequisite defined by various test scripts with slightly
different semantics has been consolidated into a single copy and
made into a lazily defined one.
* wc/make-funnynames-shared-lazy-prereq:
t: factor out FUNNYNAMES as shared lazy prereq
"git pull --rebase -v" in a repository with a submodule barfed as
an intermediate process did not understand what "-v(erbose)" flag
meant, which has been fixed.
* sb/pull-rebase-submodule:
git-submodule.sh: accept verbose flag in cmd_update to be non-quiet
"git tbdiff" that lets us compare individual patches in two
iterations of a topic has been rewritten and made into a built-in
command.
* js/range-diff: (21 commits)
range-diff: use dim/bold cues to improve dual color mode
range-diff: make --dual-color the default mode
range-diff: left-pad patch numbers
completion: support `git range-diff`
range-diff: populate the man page
range-diff --dual-color: skip white-space warnings
range-diff: offer to dual-color the diffs
diff: add an internal option to dual-color diffs of diffs
color: add the meta color GIT_COLOR_REVERSE
range-diff: use color for the commit pairs
range-diff: add tests
range-diff: do not show "function names" in hunk headers
range-diff: adjust the output of the commit pairs
range-diff: suppress the diff headers
range-diff: indent the diffs just like tbdiff
range-diff: right-trim commit messages
range-diff: also show the diff between patches
range-diff: improve the order of the shown commits
range-diff: first rudimentary implementation
Introduce `range-diff` to compare iterations of a topic branch
...
The more library-ish parts of the codebase learned to work on the
in-core index-state instance that is passed in by their callers,
instead of always working on the singleton "the_index" instance.
* nd/no-the-index: (24 commits)
blame.c: remove implicit dependency on the_index
apply.c: remove implicit dependency on the_index
apply.c: make init_apply_state() take a struct repository
apply.c: pass struct apply_state to more functions
resolve-undo.c: use the right index instead of the_index
archive-*.c: use the right repository
archive.c: avoid access to the_index
grep: use the right index instead of the_index
attr: remove index from git_attr_set_direction()
entry.c: use the right index instead of the_index
submodule.c: use the right index instead of the_index
pathspec.c: use the right index instead of the_index
unpack-trees: avoid the_index in verify_absent()
unpack-trees: convert clear_ce_flags* to avoid the_index
unpack-trees: don't shadow global var the_index
unpack-trees: add a note about path invalidation
unpack-trees: remove 'extern' on function declaration
ls-files: correct index argument to get_convert_attr_ascii()
preload-index.c: use the right index instead of the_index
dir.c: remove an implicit dependency on the_index in pathspec code
...
Improve built-in facility to catch broken &&-chain in the tests.
* es/chain-lint-more:
chainlint: add test of pathological case which triggered false positive
chainlint: recognize multi-line quoted strings more robustly
chainlint: let here-doc and multi-line string commence on same line
chainlint: recognize multi-line $(...) when command cuddled with "$("
chainlint: match 'quoted' here-doc tags
chainlint: match arbitrary here-docs tags rather than hard-coded names
Among the three codepaths we use O_APPEND to open a file for
appending, one used for writing GIT_TRACE output requires O_APPEND
implementation that behaves sensibly when multiple processes are
writing to the same file. POSIX emulation used in the Windows port
has been updated to improve in this area.
The API to iterate over all objects learned to optionally list
objects in the order they appear in packfiles, which helps locality
of access if the caller accesses these objects while as objects are
enumerated.
* jk/for-each-object-iteration:
for_each_*_object: move declarations to object-store.h
cat-file: use a single strbuf for all output
cat-file: split batch "buf" into two variables
cat-file: use oidset check-and-insert
cat-file: support "unordered" output for --batch-all-objects
cat-file: rename batch_{loose,packed}_object callbacks
t1006: test cat-file --batch-all-objects with duplicates
for_each_packed_object: support iterating in pack-order
for_each_*_object: give more comprehensive docstrings
for_each_*_object: take flag arguments as enum
for_each_*_object: store flag definitions in a single location
"git verify-tag" and "git verify-commit" have been taught to use
the exit status of underlying "gpg --verify" to signal bad or
untrusted signature they found.
* jc/gpg-status:
gpg-interface: propagate exit status from gpg back to the callers
* en/t7406-fixes:
t7406: avoid using test_must_fail for commands other than git
t7406: prefer test_* helper functions to test -[feds]
t7406: avoid having git commands upstream of a pipe
t7406: simplify by using diff --name-only instead of diff --raw
t7406: fix call that was failing for the wrong reason
t2024: mark test using "checkout -p" with PERL prerequisite
Checkout with the -p switch uses the "add interactive" framework which
is written in Perl.
One test added in 8d7b558bae ("checkout & worktree: introduce
checkout.defaultRemote", 2018-06-05) didn't declare the PERL
prerequisite, breaking the test when built with NO_PERL.
Reported-by: CB Bailey <cb@hashpling.org> Signed-off-by: CB Bailey <cb@hashpling.org> Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The caller of maybe_colorize_sideband() gives a counted buffer
<src, n>, but the callee checked src[] as if it were a NUL terminated
buffer. If src[] had all isspace() bytes in it, we would have made
n negative, and then
(1) made number of strncasecmp() calls to see if the remaining
bytes in src[] matched keywords, reading beyond the end of the
array (this actually happens even if n does not go negative),
and/or
(2) called strbuf_add() with negative count, most likely triggering
the "you want to use way too much memory" error due to unsigned
integer overflow.
Fix both issues by making sure we do not go beyond &src[n].
In the longer term we may want to accept size_t as parameter for
clarity (even though we know that a sideband message we are painting
typically would fit on a line on a terminal and int is sufficient).
Write it down as a NEEDSWORK comment.
Helped-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add the '--quiet' option to git worktree, as for the other git
commands. 'add' is the only command affected by it since all other
commands, except 'list', are currently silent by default.
[jc: appiled trivial fix-up to keep the tests from touching outside
the scratch area]
Helped-by: Martin Ågren <martin.agren@gmail.com> Helped-by: Duy Nguyen <pclouds@gmail.com> Helped-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Elia Pinto <gitter.spiros@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git merge --abort" etc. did not clean things up properly when
there were conflicted entries in the index in certain order that
are involved in D/F conflicts. This has been corrected.
The http-backend (used for smart-http transport) used to slurp the
whole input until EOF, without paying attention to CONTENT_LENGTH
that is supplied in the environment and instead expecting the Web
server to close the input stream. This has been fixed.
* mk/http-backend-content-length:
t5562: avoid non-portable "export FOO=bar" construct
http-backend: respect CONTENT_LENGTH for receive-pack
http-backend: respect CONTENT_LENGTH as specified by rfc3875
http-backend: cleanup writing to child process
A few atoms like %(objecttype) and %(objectsize) in the format
specifier of "for-each-ref --format=<format>" can be filled without
getting the full contents of the object, but just with the object
header. These cases have been optimized by calling
oid_object_info() API (instead of reading and inspecting the data).
* ot/ref-filter-object-info:
ref-filter: use oid_object_info() to get object
ref-filter: merge get_obj and get_object
ref-filter: initialize eaten variable
ref-filter: fill empty fields with empty values
ref-filter: add info_source to valid_atom
Noiseword "extern" has been removed from function decls in the
header files.
* nd/no-extern:
submodule.h: drop extern from function declaration
revision.h: drop extern from function declaration
repository.h: drop extern from function declaration
rerere.h: drop extern from function declaration
line-range.h: drop extern from function declaration
diff.h: remove extern from function declaration
diffcore.h: drop extern from function declaration
convert.h: drop 'extern' from function declaration
cache-tree.h: drop extern from function declaration
blame.h: drop extern on func declaration
attr.h: drop extern from function declaration
apply.h: drop extern on func declaration