The 'forced modes' test fails on cygwin because the post-update
hook loses it's executable bit when copied from the templates
directory by git-init. The template loses it's executable bit
because the lstat() function resolves to the "native Win32 API"
implementation.
This call to lstat() happens after git-init has set the "git_dir"
(so has_git_dir() returns true), but before the configuration has
been fully initialised. At this point git_config() does not find
any config files to parse and returns 0. Unfortunately, the code
used to determine the cygwin l/stat() function bindings did not
check the return from git_config() and assumed that the config
was complete and accessible once "git_dir" was set.
In order to fix the test, we simply change the binding code to
test the return value from git_config(), to ensure that it actually
had config values to read, before determining the requested binding.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk> Signed-off-by: Junio C Hamano <gitster@pobox.com>
help.c: Fix detection of custom merge strategy on cygwin
Test t7606-merge-custom.sh fails on cygwin when git-merge fails
with an "Could not find merge strategy 'theirs'" error, despite
the test correctly preparing an (executable) git-merge-theirs
script.
The cause of the failure is the mis-detection of the executable
status of the script, by the is_executable() function, while the
load_command_list() function is searching the path for additional
merge strategy programs.
Note that the l/stat() "functions" on cygwin are somewhat
schizophrenic (see commits adbc0b6, 7faee6b and 7974843), and
their behaviour depends on the timing of various git setup and
config function calls. In particular, until the "git_dir" has
been set (have_git_dir() returns true), the real cygwin (POSIX
emulating) l/stat() functions are called. Once "git_dir" has
been set, the "native Win32 API" implementations of l/stat()
may, or may not, be called depending on the setting of the
core.filemode and core.ignorecygwinfstricks config variables.
We also note that, since commit c869753, core.filemode is forced
to false, even on NTFS, by git-init and git-clone. A user (or a
test) can, of course, reset core.filemode to true explicitly if
the filesystem supports it (and he doesn't use any problematic
windows software). The test-suite currently runs all tests on
cygwin with core.filemode set to false.
Given the above, we see that the built-in merge strategies are
correctly detected as executable, since they are checked for
before "git_dir" is set, whereas all custom merge strategies are
not, since they are checked for after "git_dir" is set.
In order to fix the mis-detection problem, we change the code in
is_executable() to re-use the conditional WIN32 code section,
which actually looks at the content of the file to determine if
the file is executable. On cygwin we also make the additional
code conditional on the executable bit of the file mode returned
by the initial stat() call. (only the real cygwin function would
set the executable bit in the file mode.)
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk> Signed-off-by: Junio C Hamano <gitster@pobox.com>
gitweb: do not misparse nonnumeric content tag files that contain a digit
v1.7.6-rc0~27^2~4 (gitweb: Change the way "content tags" ('ctags') are
handled, 2011-04-29) tried to make gitweb's tag cloud feature more
intuitive for webmasters by checking whether the ctags/<label> under
a project's .git dir contains a number (representing the strength of
association to <label>) before treating it as one.
With that change, after putting '$feature{'ctags'}{'default'} = [1];'
in your $GITWEB_CONFIG, you could do
echo Linux >.git/ctags/linux
and gitweb would treat that as a request to tag the current repository
with the Linux tag, instead of the previous behavior of writing an
error page embedded in the projects list that triggers error messages
from Chromium and Firefox about malformed XML.
Unfortunately the pattern (\d+) used to match numbers is too loose,
and the "XML declaration allowed only at the start of the document"
error can still be experienced if you write "Linux-2.6" in place of
"Linux" in the example above. Fix it by tightening the pattern to
^\d+$.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jn/gitweb-docs:
gitweb: Move "Requirements" up in gitweb/INSTALL
gitweb: Describe CSSMIN and JSMIN in gitweb/INSTALL
gitweb: Move information about installation from README to INSTALL
* bc/maint-status-z-to-use-porcelain:
builtin/commit.c: set status_format _after_ option parsing
t7508: demonstrate status's failure to use --porcelain format with -z
With XSS prevention on (enabled using $prevent_xss), blobs
('blob_plain') of all types except a few known safe ones are served
with "Content-Disposition: attachment". However the check was too
strict; it didn't take into account optional parameter attributes,
gitweb: Move information about installation from README to INSTALL
Almost straightformard moving of "How to configure gitweb for your
local system" section from gitweb/README to gitweb/INSTALL, as it is
about build time configuration. Updated references to it.
Signed-off-by: Jakub Narebski <jnareb@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge branch 'jk/maint-config-alias-fix' into maint
* jk/maint-config-alias-fix:
handle_options(): do not miscount how many arguments were used
config: always parse GIT_CONFIG_PARAMETERS during git_config
git_config: don't peek at global config_parameters
config: make environment parsing routines static
* jk/maint-docs:
docs: fix some antique example output
docs: make sure literal "->" isn't converted to arrow
docs: update status --porcelain format
docs: minor grammar fixes to git-status
Since 9d8a5a5 (diffcore-rename: refactor "too many candidates" logic,
2011-01-06), diffcore_rename() initializes num_src but does not use it
anymore. "-Wunused-but-set-variable" in gcc-4.6 complains about this.
Signed-off-by: Jim Meyering <meyering@redhat.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jk/format-patch-am:
format-patch: preserve subject newlines with -k
clean up calling conventions for pretty.c functions
pretty: add pp_commit_easy function for simple callers
mailinfo: always clean up rfc822 header folding
t: test subject handling in format-patch / am pipeline
* jk/maint-docs:
docs: fix some antique example output
docs: make sure literal "->" isn't converted to arrow
docs: update status --porcelain format
docs: minor grammar fixes to git-status
Merge branch 'vh/config-interactive-singlekey-doc' into maint
* vh/config-interactive-singlekey-doc:
git-reset.txt: better docs for '--patch'
git-checkout.txt: better docs for '--patch'
git-stash.txt: better docs for '--patch'
git-add.txt: document 'interactive.singlekey'
config.txt: 'interactive.singlekey; is used by...
* ab/i18n-fixup: (24 commits)
i18n: use test_i18n{cmp,grep} in t7600, t7607, t7611 and t7811
i18n: use test_i18n{grep,cmp} in t7508
i18n: use test_i18ngrep in t7506
i18n: use test_i18ngrep and test_i18ncmp in t7502
i18n: use test_i18ngrep in t7501
i18n: use test_i18ncmp in t7500
i18n: use test_i18ngrep in t7201
i18n: use test_i18ncmp and test_i18ngrep in t7102 and t7110
i18n: use test_i18ncmp and test_i18ngrep in t5541, t6040, t6120, t7004, t7012 and t7060
i18n: use test_i18ncmp and test_i18ngrep in t3700, t4001 and t4014
i18n: use test_i18ncmp and test_i18ngrep in t3203, t3501 and t3507
i18n: use test_i18ngrep in t2020, t2204, t3030, and t3200
i18n: use test_i18ngrep in lib-httpd and t2019
i18n: do not overuse C_LOCALE_OUTPUT (grep)
i18n: use test_i18ncmp in t1200 and t2200
i18n: .git file is not a human readable message (t5601)
i18n: do not overuse C_LOCALE_OUTPUT
i18n: mark init-db messages for translation
i18n: mark checkout plural warning for translation
i18n: mark checkout --detach messages for translation
...
Merge branch 'jc/rename-degrade-cc-to-c' into maint
* jc/rename-degrade-cc-to-c:
diffcore-rename: fall back to -C when -C -C busts the rename limit
diffcore-rename: record filepair for rename src
diffcore-rename: refactor "too many candidates" logic
builtin/diff.c: remove duplicated call to diff_result_code()
* rr/doc-content-type:
Documentation: Allow custom diff tools to be specified in 'diff.tool'
Documentation: Add diff.<driver>.* to config
Documentation: Move diff.<driver>.* from config.txt to diff-config.txt
Documentation: Add filter.<driver>.* to config
config.c: Remove unused git_config_global() function
Commit 8f323c00 (drop support for GIT_CONFIG_NOGLOBAL, 15-03-2011)
removed the git_config_global() function, among other things, since
it is no longer required. Unfortunately, this function has since
been unintentionally restored by a faulty conflict resolution.
Remove it.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk> Signed-off-by: Junio C Hamano <gitster@pobox.com>
diff: futureproof "stop feeding the backend early" logic
Refactor the "do not stop feeding the backend early" logic into a small
helper function and use it in both run_diff_files() and diff_tree() that
has the stop-early optimization. We may later add other types of diffcore
transformation that require to look at the whole result like diff-filter
does, and having the logic in a single place is essential for longer term
maintainability.
diff_tree: disable QUICK optimization with diff filter
We stop looking for changes early with QUICK, so our diff
queue contains only a subset of the changes. However, we
don't apply diff filters until later; it will appear at that
point as though there are no changes matching our filter,
when in reality we simply didn't keep looking for changes
long enough.
Commit 2cfe8a6 (diff --quiet: disable optimization when
--diff-filter=X is used, 2011-03-16) fixes this in some
cases by disabling the optimization when a filter is
present. However, it only tweaked run_diff_files, missing
the similar case in diff_tree. Thus the fix worked only for
diffing the working tree and index, but not between trees.
Noticed by Yasushi SHOJI.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jk/maint-config-alias-fix:
handle_options(): do not miscount how many arguments were used
config: always parse GIT_CONFIG_PARAMETERS during git_config
git_config: don't peek at global config_parameters
config: make environment parsing routines static
Documentation: do not misinterpret refspecs as bold text
In v1.7.3.3~2 (Documentation: do not misinterpret pull refspec as bold
text, 2010-12-03) many uses of asterisks in expressions like
"refs/heads/*:refs/svn/origin/branches/*" were escaped as {asterisk}
to avoid being treated as delimiters for bold text, but these two were
missed.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
format-patch: make zero-length subject prefixes prettier
If you give a zero-length subject prefix to format-patch
(e.g., "format-patch --subject-prefix="), we will print the
ugly:
Subject: [ 1/2] your subject here
because we always insert a space between the prefix and
numbering. Requiring the user to provide the space in their
prefix would be more flexible, but would break existing
usage. This patch provides a DWIM and suppresses the space
for zero-length prefixes, under the assumption that nobody
actually wants "[ 1/2]".
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-sh-i18n--envsubst: add SYNOPSIS section to the documentation
Change the documentation for the git-sh-i18n--envsubst program to
include a SYNOPSIS section. Include the invocation of the program from
git-sh-i18n.sh.
Not having a SYNOPSIS section caused the "doc" target to fail on
Centos 5.5 with asciidoc 8.2.5, while building with 8.6.4 on Debian
works just fine.
The relevant error was:
ERROR: git-sh-i18n--envsubst.txt: line 9: second section must be named SYNOPSIS
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
git-submodule.sh: separate parens by a space to avoid confusing some shells
Documentation/technical/api-diff.txt: correct name of diff_unmerge()
read_gitfile_gently: use ssize_t to hold read result
remove tests of always-false condition
rerere.c: diagnose a corrupt MERGE_RR when hitting EOF between TAB and '\0'
* jm/maint-misc-fix:
read_gitfile_gently: use ssize_t to hold read result
remove tests of always-false condition
rerere.c: diagnose a corrupt MERGE_RR when hitting EOF between TAB and '\0'
* mk/grep-pcre:
git-grep: Fix problems with recently added tests
git-grep: Update tests (mainly for -P)
Makefile: Pass USE_LIBPCRE down in GIT-BUILD-OPTIONS
git-grep: update tests now regexp type is "last one wins"
git-grep: do not die upon -F/-P when grep.extendedRegexp is set.
git-grep: Bail out when -P is used with -F or -E
grep: Add basic tests
configure: Check for libpcre
git-grep: Learn PCRE
grep: Extract compile_regexp_failed() from compile_regexp()
grep: Fix a typo in a comment
grep: Put calls to fixmatch() and regmatch() into patmatch()
contrib/completion: --line-number to git grep
Documentation: Add --line-number to git-grep synopsis
Brian Gernhardt reported that test 'git grep -E -F -G a\\+b' fails on
OS X 10.6.7. This is because I assumed \+ is part of BRE, which isn't
true on all platforms.
The easiest way to make this test pass is to just update expected
output, but that would make the test pointless. Its real purpose is to
check whether 'git grep -E -F -G' is different from 'git grep -E -G -F'.
To check that, let's change pattern to "a+b*c". This should return
different match for -G, -F and -E.
I also made two small tweaks to the tests. First, I added path "ab" to
all calls to future-proof tests. Second, I updated last two tests to
better show that 'git grep -P -E' is different from 'git grep -E -P'.
Signed-off-by: Michał Kiedrowicz <michal.kiedrowicz@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/notes-batch-removal:
show: --ignore-missing
notes remove: --stdin reads from the standard input
notes remove: --ignore-missing
notes remove: allow removing more than one
* jk/haves-from-alternate-odb:
receive-pack: eliminate duplicate .have refs
bisect: refactor sha1_array into a generic sha1 list
refactor refs_from_alternate_cb to allow passing extra data
builtin/commit.c: set status_format _after_ option parsing
'git status' should use --porcelain output format when -z is given.
It was not doing so since the _effect_ of using -z, namely that
null_termination would be set, was being checked _before_ option parsing
was performed.
So, move the check so that it is performed after option parsing.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t7508: demonstrate status's failure to use --porcelain format with -z
When 'git status' is supplied the -z switch, and no output format has been
selected, it is supposed to use the --porcelain format. This does not
happen. Instead, the standard long format is used. Add a test to
demonstrate this failure.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous commit simply hijacked --quiet and essentially made it into a
no-op. Instead, take it as a cue that the end user wants to omit the patch
output from commands that default to show patches, e.g. "show".
When we finish a rebase, our detached HEAD is at the final
result. We update the original branch ref with this result,
and then point the HEAD symbolic ref at the updated branch.
We write a reflog for the branch update, but not for the
update of HEAD.
Because we're already at the final result on the detached
HEAD, moving to the branch actually doesn't change our
commit sha1 at all. So in that sense, a reflog entry would
be pointless.
However, humans do read reflogs, and an entry saying "rebase
finished: returning to refs/heads/master" can be helpful in
understanding what is going on.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we abort a rebase, we return to the original value of
HEAD. Failing to write a reflog entry means we create a
gap in the reflog (which can cause "git show
HEAD@{5.minutes.ago}" to issue a warning). Plus having the
extra entry makes the reflog easier to follow for a human.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
We do allow vanilla Makefile users to say make sysconfdir=/else/where
and config.mak can also be tweaked manually for the same effect. Give
the same configurablity to ./configure users as well.
These diff-index and diff-tree sample outputs date back to
the first month of git's existence. The output format has
changed slightly since then, so let's have it match the
current output.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
docs: make sure literal "->" isn't converted to arrow
Recent versions of asciidoc will treat "->" as a
single-glyph arrow symbol, unless it is inside a literal
code block. This is a problem if we are discussing literal
output and want to show the ASCII characters.
Our usage falls into three categories:
1. Inside a code block. These can be left as-is.
2. Discussing literal output or code, but inside a
paragraph. This patch escapes these as "\->".
3. Using the arrow as a symbolic element, such as "use the
Edit->Account Settings menu". In this case, the
arrow symbol is preferable, so we leave it as-is.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --porcelain format was originally identical to the
--short format, but designed to be stable as the short
format changed. Since this was written, the short format
picked up a few incompatible niceties, but this description
was never changed.
Let's mention the differences. While we're at it, let's add
some sub-section headings to make the "output" section a
little easier to navigate.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
In older versions of git, we used rfc822 header folding to
indicate that the original subject line had multiple lines
in it. But since a1f6baa (format-patch: wrap long header
lines, 2011-02-23), we now use header folding whenever there
is a long line.
This means that "git am" cannot trust header folding as a
sign from format-patch that newlines should be preserved.
Instead, format-patch needs to signal more explicitly that
the newlines are significant. This patch does so by
rfc2047-encoding the newlines in the subject line. No
changes are needed on the "git am" end; it already decodes
the newlines properly.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
clean up calling conventions for pretty.c functions
We have a pretty_print_context representing the parameters
for a pretty-print session, but we did not use it uniformly.
As a result, functions kept growing more and more arguments.
Let's clean this up in a few ways:
1. All pretty-print pp_* functions now take a context.
This lets us reduce the number of arguments to these
functions, since we were just passing around the
context values separately.
2. The context argument now has a cmit_fmt field, which
was passed around separately. That's one less argument
per function.
3. The context argument always comes first, which makes
calling a little more uniform.
This drops lines from some callers, and adds lines in a few
places (because we need an extra line to set the context's
fmt field). Overall, we don't save many lines, but the lines
that are there are a lot simpler and more readable.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
pretty: add pp_commit_easy function for simple callers
Many callers don't actually care about the pretty print
context at all; let's just give them a simple way of
pretty-printing a commit without having to create a context
struct.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-submodule.sh: separate parens by a space to avoid confusing some shells
Some shells interpret '(( ))' according to the rules for arithmetic
expansion. This may not follow POSIX, but is prevalent in commonly used
shells. Bash does not have a problem with this particular instance of
'((', likely because it is not followed by a '))', but the public domain
ksh does, and so does ksh on IRIX 6.5.
So, add a space between the parenthesis to avoid confusing these shells.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Without the "-k" option, mailinfo will convert a folded
subject header like:
Subject: this is a
subject that doesn't
fit on one line
into a single line. With "-k", however, we assumed that
these newlines were significant and represented something
that the sending side would want us to preserve.
For messages created by format-patch, this assumption was
broken by a1f6baa (format-patch: wrap long header lines,
2011-02-23). For messages sent by arbitrary MUAs, this was
probably never a good assumption to make, as they may have
been folding subjects in accordance with rfc822's line
length recommendations all along.
This patch now joins folded lines with a single whitespace
character. This treats header folding purely as a syntactic
feature of the transport mechanism, not as something that
format-patch is trying to tell us about the original
subject.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t: test subject handling in format-patch / am pipeline
Commit a1f6baa (format-patch: wrap long header lines,
2011-02-23) changed format-patch's behavior with respect to
long header lines, but made no accompanying changes to the
receiving side. It was thought that "git am" would handle
these folded subjects fine, but there is a regression when
using "am -k".
Let's add a test documenting this. While we're at it, let's
give more complete test coverage to document what should be
happening in each case. We test three types of subjects:
a short one, one long enough to require wrapping, and a
multiline subject. For each, we test these three
combinations:
format-patch | am
format-patch -k | am
format-patch -k | am -k
We don't bother testing "format-patch | am -k", which is
nonsense (you will be adding in [PATCH] cruft to each
subject).
This reveals the regression above (long subjects have
linebreaks introduced via "format-patch -k | am -k"),
as well as an existing non-optimal behavior (multiline
subjects are not preserved using "-k").
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The read_in_full function repeatedly calls read() to fill a
buffer. If the first read() returns an error, we notify the
caller by returning the error. However, if we read some data
and then get an error on a subsequent read, we simply return
the amount of data that we did read, and the caller is
unaware of the error.
This makes the tradeoff that seeing the partial data is more
important than the fact that an error occurred. In practice,
this is generally not the case; we care more if an error
occurred, and should throw away any partial data.
I audited the current callers. In most cases, this will make
no difference at all, as they do:
if (read_in_full(fd, buf, size) != size)
error("short read");
However, it will help in a few cases:
1. In sha1_file.c:index_stream, we would fail to notice
errors in the incoming stream.
2. When reading symbolic refs in resolve_ref, we would
fail to notice errors and potentially use a truncated
ref name.
3. In various places, we will get much better error
messages. For example, callers of safe_read would
erroneously print "the remote end hung up unexpectedly"
instead of showing the read error.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 13fc2c1 (remote: disallow some nonsensical option
combinations, 2011-03-30) made it impossible to use "remote
add -t foo --mirror". The argument was that specifying
specific branches is useless because:
1. Push mirrors do not want a refspec at all.
2. The point of fetch mirroring is to use a broad refspec
like "refs/*", but using "-t" overrides that.
Point (1) is valid; "-t" with push mirrors is useless. But
point (2) ignored another side effect of using --mirror: it
fetches the refs directly into the refs/ namespace as they
are found upstream, instead of placing them in a
separate-remote layout.
So 13fc2c1 was overly constrictive, and disallowed
reasonable specific-branch mirroring, like:
read_gitfile_gently: use ssize_t to hold read result
Otherwise, a negative error return becomes a very large read
value. We catch this in practice because we compare the
expected and actual numbers of bytes (and you are not likely
to be reading (size_t)-1 bytes), but this makes the
correctness a little more obvious.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* fsck.c (fsck_error_function): Don't test obj->sha1 == 0.
It can never be true, since that sha1 member is an array.
* transport.c (set_upstreams): Likewise for ref->new_sha1.
Signed-off-by: Jim Meyering <meyering@redhat.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
rerere.c: diagnose a corrupt MERGE_RR when hitting EOF between TAB and '\0'
If we reach EOF after the SHA1-then-TAB, yet before the NUL that
terminates each file name, we would fill the file name buffer with \255
bytes resulting from the repeatedly-failing fgetc (returns EOF/-1) and
ultimately complain about "filename too long", because no NUL was
encountered.
Signed-off-by: Jim Meyering <jim@meyering.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jn/userdiff-perl-updates:
userdiff/perl: tighten BEGIN/END block pattern to reject here-doc delimiters
tests: make test_expect_code quieter on success
userdiff/perl: catch sub with brace on second line
userdiff/perl: match full line of POD headers
userdiff/perl: anchor "sub" and "package" patterns on the left
t4018 (funcname patterns): minor cleanups
t4018 (funcname patterns): make configuration easier to track
t4018 (funcname patterns): make .gitattributes state easier to track
* jn/gitweb-js:
gitweb: Make JavaScript ability to adjust timezones configurable
gitweb.js: Add UI for selecting common timezone to display dates
gitweb: JavaScript ability to adjust time based on timezone
gitweb: Unify the way long timestamp is displayed
gitweb: Refactor generating of long dates into format_timestamp_html
gitweb.js: Provide getElementsByClassName method (if it not exists)
gitweb.js: Introduce code to handle cookies from JavaScript
gitweb.js: Extract and improve datetime handling
gitweb.js: Provide default values for padding in padLeftStr and padLeft
gitweb.js: Update and improve comments in JavaScript files
gitweb: Split JavaScript for maintability, combining on build
* jn/ctags-more:
gitweb: Optional grouping of projects by category
gitweb: Modularized git_get_project_description to be more generic
gitweb: Split git_project_list_body in two functions
Merge branch 'jk/git-connection-deadlock-fix' into maint-1.7.4
* jk/git-connection-deadlock-fix:
test core.gitproxy configuration
send-pack: avoid deadlock on git:// push with failed pack-objects
connect: let callers know if connection is a socket
connect: treat generic proxy processes like ssh processes
Merge branch 'js/maint-send-pack-stateless-rpc-deadlock-fix' into maint-1.7.4
* js/maint-send-pack-stateless-rpc-deadlock-fix:
sideband_demux(): fix decl-after-stmt
send-pack: unbreak push over stateless rpc
send-pack: avoid deadlock when pack-object dies early
Merge branch 'kk/maint-prefix-in-config-mak' into maint
* kk/maint-prefix-in-config-mak:
Honor $(prefix) set in config.mak* when defining ETC_GIT*
Revert "Honor $(prefix) set in config.mak* when defining ETC_GIT* and sysconfdir"
Honor $(prefix) set in config.mak* when defining ETC_GIT* and sysconfdir