docs: fix filter-branch subdir example for exotic repo names
The GIT_INDEX_FILE variable we get from git has the full
path to the repo, which may contain spaces. When we use it
in our shell snippet, it needs to be quoted.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
HOME must be set before calling git-init when creating test repositories
Otherwise the created test repositories will be affected by users ~/.gitconfig.
For example, setting core.logAllrefupdates in users config will make all
calls to "git config --unset core.logAllrefupdates" fail which will break
the first test which uses the statement and expects it to succeed.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com> Acked-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
gitweb: Fix handling of fractional timezones in parse_date
Fractional timezones, like -0330 (NST used in Canada) or +0430
(Afghanistan, Iran DST), were not handled properly in parse_date; this
means values such as 'minute_local' and 'iso-tz' were not generated
correctly.
This was caused by two mistakes:
* sign of timezone was applied only to hour part of offset, and not
as it should be also to minutes part (this affected only negative
fractional timezones).
* 'int $h + $m/60' is 'int($h + $m/60)' and not 'int($h) + $m/60',
so fractional part was discarded altogether ($h is hours, $m is
minutes, which is always less than 60).
Note that positive fractional timezones +0430, +0530 and +1030 can be
found as authortime in git.git repository itself.
For example http://repo.or.cz/w/git.git/commit/88d50e7 had authortime
of "Fri, 8 Jan 2010 18:48:07 +0000 (23:48 +0530)", which is not marked
with 'atnight', when "git show 88d50e7" gives correct author date of
"Sat Jan 9 00:18:07 2010 +0530".
Signed-off-by: Jakub Narebski <jnareb@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-am.txt: advertise 'git am --abort' instead of 'rm .git/rebase-apply'
'git am --abort' is around for quite a long time now, and users should
normally not poke around inside the .git directory, yet the
documentation of 'git am' still recommends the following:
... if you decide to start over from scratch,
run `rm -f -r .git/rebase-apply` ...
Suggest 'git am --abort' instead.
It's not quite the same as the original, because 'git am --abort' will
restore the original branch, while simply removing '.git/rebase-apply'
won't, but that's rather a thinko in the original wording, because
that won't actually "start over _from scratch_".
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
bisect: visualize with git-log if gitk is unavailable
If gitk is not available in the PATH, bisect ends up
exiting with the shell's 127 error code, confusing the git
wrapper into thinking that bisect is not a git command.
We already fallback to git-log if there doesn't seem to be a
graphical display available. We should do the same if gitk
is not available in our PATH at all. This not only fixes the
ugly error message, but is a much more sensible default than
failing to show the user anything.
Reported by Maxin John.
Tested-by: Maxin B. John <maxin@maxinbjohn.info> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* sp/maint-fd-limit:
sha1_file.c: Don't retain open fds on small packs
mingw: add minimum getrlimit() compatibility stub
Limit file descriptors used by packs
Merge branch 'so/submodule-no-update-first-time' into maint
* so/submodule-no-update-first-time:
t7406: "git submodule update {--merge|--rebase]" with new submodules
submodule: no [--merge|--rebase] when newly cloned
The test setup in t8006-blame-textconv.sh uses "ln -sf" to
overwrite an existing symlink. Unfortunately, both /usr/bin/ln
and /usr/xpg4/bin/ln on solaris 9 don't properly handle -f and -s
used at the same time. This caused the test setup and subsequent
checks to fail.
Instead, remove the symlink and then create a new one in the
setup code.
The upstream Solaris bug (fixed in 10, but not 9) is documented
here:
Merge branch 'lt/rename-no-extra-copy-detection' into maint
* lt/rename-no-extra-copy-detection:
diffcore-rename: improve estimate_similarity() heuristics
diffcore-rename: properly honor the difference between -M and -C
for_each_hash: allow passing a 'void *data' pointer to callback
Merge branch 'mg/placeholders-are-lowercase' into maint
* mg/placeholders-are-lowercase:
Make <identifier> lowercase in Documentation
Make <identifier> lowercase as per CodingGuidelines
Make <identifier> lowercase as per CodingGuidelines
Make <identifier> lowercase as per CodingGuidelines
CodingGuidelines: downcase placeholders in usage messages
I tried both Firefox and Opera and saw the same behavior.
The desired output is:
1 /*
2 * test
3 */
This can be accomplished by specifying "--replace-tabs=8" on the
highlight command line.
Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Acked-by: John 'Warthog9' Hawley <warthog9@eaglescrag.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some versions of strlen use SSE to speed up the calculation and load 4
bytes at a time, even if it means reading past the end of the
allocated memory. This read is safe and when the strlen function is
inlined, it is not replaced by valgrind, which reports a
false-possitive.
Tell valgrind to ignore this particular error, as the read is, in
fact, safe. Current upstream-released version 3.6.1 is affected. Some
distributions have this fixed in their latest versions.
Signed-off-by: Carlos Martín Nieto <cmn@elego.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
- prepare_submodule_summary prepares the revision walker
to list changes in a submodule. That is, it:
* finds merge bases between the commits pointed to this
path from before ("left") and after ("right") the change;
* checks whether this is a fast-forward or fast-backward;
* prepares a revision walk to list commits in the symmetric
difference between the commits at each endpoint.
It returns nonzero on error.
- print_submodule_summary runs the revision walk and saves
the result to a strbuf in --left-right format.
The goal is just readability. No functional change intended.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Acked-by: Jens Lehmann <Jens.Lehmann@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
branch: split off function that writes tracking info and commit subject
Introduce a add_verbose_info function that takes care of adding
- an abbreviated object name;
- a summary of the form [ahead x, behind y] of the relationship
to the corresponding upstream branch;
- a one line commit subject
for the tip commit of a branch, for use in "git branch -v" output.
No functional change intended. This just unindents the code a little
and makes it easier to skip on first reading.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a struct definitions, unlike functions, the prevailing style is for
the opening brace to go on the same line as the struct name, like so:
struct foo {
int bar;
char *baz;
};
Indeed, grepping for 'struct [a-z_]* {$' yields about 5 times as many
matches as 'struct [a-z_]*$'.
Linus sayeth:
Heretic people all over the world have claimed that this inconsistency
is ... well ... inconsistent, but all right-thinking people know that
(a) K&R are _right_ and (b) K&R are right.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since v1.7.2-rc0~23^2~2 (Add per-repository eol normalization,
2010-05-19), building with gcc -std=gnu89 -pedantic produces warnings
like the following:
convert.c:21:11: warning: comma at end of enumerator list [-pedantic]
gcc is right to complain --- these commas are not permitted in C89.
In the spirit of v1.7.2-rc0~32^2~16 (2010-05-14), remove them.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Revert "core.abbrevguard: Ensure short object names stay unique a bit longer"
This reverts commit 72a5b561fc1c4286bc7c5b0693afc076af261e1f, as adding
fixed number of hexdigits more than necessary to make one object name
locally unique does not help in futureproofing the uniqueness of names
we generate today.
SubmittingPatches: clarify the expected commit log description
Earlier, 47afed5 (SubmittingPatches: itemize and reflect upon well written
changes, 2009-04-28) added a discussion on the contents of the commit log
message, but the last part of the new paragraph didn't make much sense.
Reword it slightly to make it more readable.
Update the "quicklist" to clarify what we mean by "motivation" and
"contrast". Also mildly discourage external references.
The description was unclear if -c or --cc was the default (--cc is for
some commands), and incorrectly implied that the default applies to
all the diff generating commands.
Most importantly, "log" does not default to "--cc" (it defaults to
"--no-merges") and "log -p" obeys the user's wish to see non-combined
format. Only "diff" (during merge and three-blob comparison) and
"show" use --cc as the default.
Signed-off-by: Adam Monsen <haircut@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-compat-util.h: Honor HP C's noreturn attribute
HP C for Integrity servers (Itanium) gained support for noreturn
attribute sometime in 2006. It was released in Compiler Version
A.06.10 and made available in July 2006.
The __HP_cc define detects the HP C compiler version. Precede the
__GNUC__ check so it works well when compiling with HP C using -Agcc
option that enables partial support for the GNU C dialect. The -Agcc
defines the __GNUC__ too.
Signed-off-by: Michal Rokos <michal.rokos@nextsoft.cz> Signed-off-by: Junio C Hamano <gitster@pobox.com>
apply -v: show offset count when patch did not apply exactly
When the line number the patch intended to touch does not match
the line in the version being patched, GNU patch reports that
it applied the hunk at a different line number, with how big an
offset.
Teach "git apply" to do the same under --verbose option.
apply: do not patch lines that were already patched
When looking for a place to apply a hunk, we used to check lines that
match the preimage of it, starting from the line that the patch wants to
apply the hunk at, looking forward and backward with increasing offsets
until we find a match.
Colin Guthrie found an interesting case where this misapplied a patch that
wanted to touch a preimage that consists of
}
}
return 0;
}
which is a rather unfortunately common pattern.
The target version of the file originally had only one such location, but
the hunk immediately before that created another instance of such block of
lines, and find_pos() happily reported that the preimage of the hunk
matched what it wanted to modify.
Oops.
By marking the lines application of earlier hunks touched and preventing
match_fragment() from considering them as a match with preimage of other
hunks, we can reduce such an accident.
I also considered to teach apply_one_fragment() to take the offset we have
found while applying the previous hunk into account when looking for a
match with find_pos(), but dismissed that approach, because it would
sometimes work better but sometimes worse, depending on the difference
between the version the patch was created against and the version the
patch is being applied.
This does _not_ prevent misapplication of patches to a file that has many
similar looking blocks of lines and a preimage cannot identify which one
of them should be applied. For that, we would need to scan beyond the
first match in find_pos(), and issue a warning (or error out). That will
be a separate topic.
git_dir must always be non-NULL so "if (git_dir)" is unnecessary.
Before this code, if git_dir == NULL, it will default to
DEFAULT_GIT_DIR_ENVIRONMENT.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a pack file is small enough that its entire contents fits within
one mmap window, mmap the file and then immediately close its file
descriptor. This reduces the number of file descriptors that are
needed to read from repositories with many tiny pack files, such
as one that has received 1000 pushes (and created 1000 small pack
files) since its last repack.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rather than using 'errno == EMFILE' after a failed open() call
to indicate the process is out of file descriptors and an LRU
pack window should be closed, place a hard upper limit on the
number of open packs based on the actual rlimit of the process.
By using a hard upper limit that is below the rlimit of the current
process it is not necessary to check for EMFILE on every single
fd-allocating system call. Instead reserving 25 file descriptors
makes it safe to assume the system call won't fail due to being over
the filedescriptor limit. Here 25 is chosen as a WAG, but considers
3 for stdin/stdout/stderr, and at least a few for other Git code
to operate on temporary files. An additional 20 is reserved as it
is not known what the C library needs to perform other services on
Git's behalf, such as nsswitch or name resolution.
This fixes a case where running `git gc --auto` in a repository
with more than 1024 packs (but an rlimit of 1024 open fds) fails
due to the temporary output file not being able to allocate a
file descriptor. The output file is opened by pack-objects after
object enumeration and delta compression are done, both of which
have already opened all of the packs and fully populated the file
descriptor table.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
commit: error out for missing commit message template
When "git commit" was rewritten in C (v1.5.4-rc0~78^2~30,
2007-11-08), a subtle bug in --template was introduced. If the
file named by a --template parameter is missing, previously git
would error out with a message:
Commit template file does not exist.
but in the C version the --template parameter gets ignored and
the default template is used.
t7500 has two tests for this case which would have caught it, except
that with the default $EDITOR, the commit message template is left
unmodified, causing 'git commit' to error out and the test to
succeed.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
mergetool-lib: call vim in readonly mode for diffs
When [g]vimdiff is called for files which are opened already, the editor
complains about the existing swap file. But we do not want to write
anything when called from difftool. So, make difftool use "-R" for the
vim family. This
- prevents the use of a swap file and
- marks the buffers readonly.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The logic in builtin_diffstat assumes that a
complete_rewrite pair should have its lines counted. This is
nonsensical for binary files and leads to confusing things
like:
So let's reorder the function to handle binary files first
(which from diffstat's perspective look like complete
rewrites anyway), then rewrites, then actual diffstats.
There are two bonus prizes to this reorder:
1. It gets rid of a now-superfluous goto.
2. The binary case is at the top, which means we can
further optimize it in the next patch.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git traditionally overwrites untracked symlinks silently. This will
generally not cause massive data loss, but it is inconsistent with
the behavior for regular files, which are not silently overwritten.
With this change, git refuses to overwrite untracked symlinks by
default. If the user really wants to overwrite the untracked
symlink, he has git-clean and git-checkout -f at his disposal.
Signed-off-by: Clemens Buchacher <drizzd@aon.at> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change commit_msg_is() in t/t7500-commit.sh to use test_cmp instead of
the shell's test function. Now if a test fails we'll get test_cmp
output showing us what failed.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t/gitweb-lib.sh: Ensure that errors are shown for --debug --immediate
Because '--immediate' stops test suite after first error, therefore in
this mode
test_debug 'cat gitweb.log'
was never ran, thus in effect negating effect of '--debug' option.
This made finidng the cause of errors in gitweb test sute difficult.
Modify the gitweb_run test subroutine to run test_debug itself in the
case of errors (and also remove "test_debug 'cat gitweb.log'" from
gitweb tests).
This makes it possible to run *gitweb tests* with --immediate ---debug
combination of options; also it makes gitweb tests to not output
spurious debug data that is not considered error.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Jakub Narębski <jnareb@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
gitweb/gitweb.perl: don't call S_ISREG() with undef
Change S_ISREG($to_mode_oct) to S_ISREG($from_mode_oct) in the branch
that handles from modes, not to modes. This logic appears to have been
caused by copy/paste programming by Jakub Narebski in e8e41a93. It
would be better to rewrite this code not to be duplicated, but I
haven't done so.
This issue caused a failing test on perl 5.13.9, which has a warning
that turned this up:
gitweb.perl: Use of uninitialized value in subroutine entry at /home/avar/g/git/t/../gitweb/gitweb.perl line 4415.
Which caused the Git test suite to fail on this test:
gitweb/gitweb.perl: remove use of qw(...) as parentheses
Using the qw(...) construct as implicit parentheses was deprecated in
perl 5.13.5. Change the relevant code in gitweb to not use the
deprecated construct. The offending code was introduced in 3562198b by
Jakub Narebski.
The issue is that perl will now warn about this:
$ perl -wE 'for my $i qw(a b) { say $i }'
Use of qw(...) as parentheses is deprecated at -e line 1.
a
b
This caused gitweb.perl to warn on perl 5.13.5 and above, and these
tests to fail on those perl versions:
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Acked-by: Jakub Narębski <jnareb@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The logic to quickly dismiss potential rename pairs was broken. It
would too eagerly dismiss possible renames when all of the difference
was due to pure new data (or deleted data).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
diffcore-rename: properly honor the difference between -M and -C
We would allow rename detection to do copy detection even when asked
purely for renames. That confuses users, but more importantly it can
terminally confuse the recursive merge rename logic.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
for_each_hash: allow passing a 'void *data' pointer to callback
For the find_exact_renames() function, this allows us to pass the
diff_options structure pointer to the low-level routines. We will use
that to distinguish between the "rename" and "copy" cases.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
clone: die when trying to clone missing local path
Since 86ac751 (Allow cloning an empty repository,
2009-01-23), doing:
git clone does-not-exist
has created does-not-exist as an empty repository. This was
an unintentional side effect of 86ac751. Even weirder,
doing:
git clone does-not-exist new-dir
_does_ fail, making this "feature" (if you want to consider
it such) broken. Let's detect this situation and explicitly
die. It's almost certainly not what the user intended.
This patch also adds two tests. One for the missing path
case, and one to confirm that a similar case, cloning a
non-repository directory, fails.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
On Mac OS X 10.5.0, test_terminal gets stuck reading from the pty
master every once in a while. To reproduce the problem:
perl -MIO::Pty -MFile::Copy -e '
for (my $i = 0;; $i++) {
my $master = new IO::Pty;
my $slave = $master->slave;
if (fork == 0) {
close $master or die "close: $!";
open STDOUT, ">&", $slave or die "dup2: $!";
close $slave or die "close: $!";
exec("echo", "hi", $i) or die "exec: $!";
}
close $slave or die "close: $!";
copy($master, \*STDOUT) or die "copy: $!";
close $master or die "close: $!";
wait;
}
'
It blocks after 7000 iterations or so in sysread(). The relevant
sysread() call is the second call by the parent, which presumably
executes before the child dies but after the parent has read all
output from there.
Since this is an intermitent problem, the quick check of terminal
support in lib-terminal doesn't catch it. Skip these tests on the Mac
for now.
Noticed-by: Thomas Rast <trast@student.ethz.ch> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t7406: "git submodule update {--merge|--rebase]" with new submodules
Add two test cases in t7406 to ensure that the --merge/--rebase options
are ignored for "git submodule update" with new modules. These test that
a simple checkout is performed instead.
Signed-off-by: Spencer E. Olson <olsonse@umich.edu> Acked-by: Jens Lehmann <Jens.Lehmann@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
submodule: no [--merge|--rebase] when newly cloned
"git submodule update" can be run with either the "--merge" or "--rebase"
option, or submodule.<name>.update configuration variable can be set to
"merge" or "rebase, to cause local work to get integrated when updating
the submodule.
When a submodule is newly cloned, however, it does not have a check out
when a rebase or merge is attempted, leading to a failure. For newly
cloned submodules, simply check out the appropriate revision. There is no
local work to integrate with for them.
Signed-off-by: Spencer E. Olson <olsonse@umich.edu> Acked-by: Jens Lehmann <Jens.Lehmann@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Leaving uppercase abbreviations (e.g. URL) and an identifier named after
an upercase env variable (CVSROOT) in place, this adjusts the few
remaining cases and fixes an unidentified identifier along the way.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Users are sometimes confused with two different types of "tracking" behavior
in Git: "remote-tracking" branches (e.g. refs/remotes/*/*) versus the
merge/rebase relationship between a local branch and its @{upstream}
(controlled by branch.foo.remote and branch.foo.merge config settings).
When the push.default is set to 'tracking', it specifies that a branch should
be pushed to its @{upstream} branch. In other words, setting push.default to
'tracking' applies only to the latter of the above two types of "tracking"
behavior.
In order to make this more understandable to the user, we rename the
push.default == 'tracking' option to push.default == 'upstream'.
push.default == 'tracking' is left as a deprecated synonym for 'upstream'.
Signed-off-by: Johan Herland <johan@herland.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a merge is stopped due to conflicts or --no-commit, the
subsequent commit calls the prepare-commit-msg hook. However,
it is not called after a clean merge. Fix this inconsistency
by invoking the hook after clean merges as well.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>