bisect: error out when passing bad path parameters
As reported by Mark Lodato, "git bisect", when it was started with
path parameters that match no commit was kind of working without
taking account of path parameters and was reporting something like:
Bisecting: -1 revisions left to test after this (roughly 0 steps)
It is more correct and safer to just error out in this case, before
displaying the revisions left, so this patch does just that.
Note that this bug is very old, it exists at least since v1.5.5.
And it is possible to detect that case earlier in the bisect
algorithm, but it is not clear that it would be an improvement to
error out earlier, on the contrary it may change the behavior of
"git rev-list --bisect-all" for example, which is currently correct.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --cherry-pick logic starts by counting the commits on each side,
so that it can filter away commits on the bigger one. However, so
far it missed an opportunity for optimization: it doesn't need to do
any work if either side is empty.
This in particular helps the common use-case 'git rebase -i HEAD~$n':
it internally uses --cherry-pick, but since HEAD~$n is a direct
ancestor the left side is always empty.
Signed-off-by: Thomas Rast <trast@student.ethz.ch> Signed-off-by: Junio C Hamano <gitster@pobox.com>
utf8.c: speculatively assume utf-8 in strbuf_add_wrapped_text()
is_utf8() works by calling utf8_width() for each character at the
supplied location. In strbuf_add_wrapped_text(), we do that anyway
while wrapping the lines. So instead of checking the encoding
beforehand, optimistically assume that it's utf-8 and wrap along
until an invalid character is hit, and when that happens start over.
This pays off if the text consists only of valid utf-8 characters.
The following command was run against the Linux kernel repo with
git 1.7.0:
$ time git log --format='%b' v2.6.32 >/dev/null
real 0m2.679s
user 0m2.580s
sys 0m0.100s
$ time git log --format='%w(60,4,8)%b' >/dev/null
real 0m4.342s
user 0m4.230s
sys 0m0.110s
And with this patch series:
$ time git log --format='%w(60,4,8)%b' >/dev/null
real 0m3.741s
user 0m3.630s
sys 0m0.110s
So the cost of wrapping is reduced to 70% in this case.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The patch before the previous one made sure that all callers of
strbuf_add_wrapped_text() supply a strbuf. Replace all calls of
strbuf_write() with regular strbuf functions and remove it.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous patch made sure that strbuf_add_wrapped_text() (and thus
strbuf_add_indented_text(), too) always get a strbuf. Make use of
this fact by adding strbuf_addchars(), a small helper that adds a
char the specified number of times to a strbuf, and use it to replace
print_spaces().
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we remove a path in a/deep/subdirectory, we should try to
remove as many trailing components as possible (i.e.,
subdirectory, then deep, then a). However, the test for the
return value of rmdir was reversed, so we only ever deleted
at most one level.
The fix is in remove_path, so "apply" and "merge-recursive"
also are fixed.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
With NONGIT_OK set, require_work_tree function outside a git repository
gives a syntax error. This is caused by an incorrect use of "test" that
didn't anticipate $(git rev-parse --is-inside-work-tree) may return an
empty string.
Properly quote the argument to "test", and send the standard error stream
to /dev/null to avoid giving duplicate error messages.
Signed-off-by: Gabriel Filion <lelutin@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we encounter a symref that is dangling, in most cases we will warn
about it. The one exception is a dangling HEAD, as that indicates a
branch yet to be born.
However, the check in dwim_ref was not quite right. If we were fed
something like "HEAD^0" we would try to resolve "HEAD", see that it is
dangling, and then check whether the _original_ string we got was
"HEAD" (which it wasn't in this case). And that makes no sense; the
dangling thing we found was not "HEAD^0" but rather "HEAD".
Fixing this squelches a scary warning from "submodule summary HEAD" (and
consequently "git status" with status.submodulesummary set) in an empty
repo, as the submodule script calls "git rev-parse -q --verify HEAD^0".
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
stash pop: remove 'apply' options during 'drop' invocation
The 'git stash pop' option parsing used to remove the first argument
in --index mode. At the time this was implemented, this first
argument was always --index. However, since the invention of the -q
option in fcdd0e9 (stash: teach quiet option, 2009-06-17) you can
cause an internal invocation of
git stash drop --index
by running
git stash pop -q --index
which then of course fails because drop doesn't know --index.
To handle this, instead let 'git stash apply' decide what the future
argument to 'drop' should be.
Warning: this means that 'git stash apply' must parse all options that
'drop' can take, and deal with them in the same way. This is
currently true for its only option -q.
Signed-off-by: Thomas Rast <trast@student.ethz.ch> Acked-by: Stephen Boyd <bebarino@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-imap-send: Convert LF to CRLF before storing patch to draft box
When storing a message over IMAP (RFC 3501 6.3.11), the message should be
in the format of an RFC 2822 message; most notably, CRLF must be used as
a line terminator.
Convert "\n" line endings in the payload to CRLF before feeding it to
IMAP APPEND command.
Signed-off-by: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t8003: check exit code of command and error message separately
Shell reports exit status only from the most downstream command
in a pipeline. In these tests, we want to make sure that the
command fails in a controlled way, and produces a correct error
message.
This issue was known by Jay who submitted the patch, and also was
pointed out by Hannes during the review process, but I forgot to
fix it up before applying. Sorry about that.
Merge branch 'jc/maint-reflog-bad-timestamp' into maint
* jc/maint-reflog-bad-timestamp:
t0101: use a fixed timestamp when searching in the reflog
Update @{bogus.timestamp} fix not to die()
approxidate_careful() reports errorneous date string
blame would segv if given -L <lineno> with <lineno> past the end of the file.
While we're fixing the bug, add test cases for an invalid <start> when called
as -L <start>,<end> or -L<start>.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
When 921177f (Documentation: improve "add", "pull" and "format-patch"
examples, 2008-05-07) converted this from enumeration header to displayed
text, it failed to adjust for the AsciiDoc's rule to quote backslashes.
In displayed text, backslash is shown verbatim, while in enumeration
header, we need to double it.
We have a similar construct in git-rm.txt documentation, and need to be
careful when somebody wants to update it to match the style of the "git
add" example.
Noticed by: Greg Bacon <gbacon@dbresearch.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code to guess an output archive's format consumed any --format
options and built a new one. Jonathan noticed that it does so in an
unsafe way, risking to overflow the static buffer fmt_opt.
Change the code to keep the existing --format options intact and to only
add a new one if a format could be guessed based on the output file name.
The new option is added as the first one, allowing the existing ones to
overrule it, i.e. explicit --format options given on the command line win
over format guesses, as before.
To simplify the code further, format_from_name() is changed to return the
full --format option, thus no potentially dangerous sprintf() calls are
needed any more.
Reported-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>
fast-import: Stream very large blobs directly to pack
If a blob is larger than the configured big-file-threshold, instead
of reading it into a single buffer obtained from malloc, stream it
onto the end of the current pack file. Streaming the larger objects
into the pack avoids the 4+ GiB memory footprint that occurs when
fast-import is processing 2+ GiB blobs.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge branch 'bg/maint-add-all-doc' into maint-1.6.5
* bg/maint-add-all-doc:
git-rm doc: Describe how to sync index & work tree
git-add/rm doc: Consistently back-quote
Documentation: 'git add -A' can remove files
Caught by valgrind in t5500, but it is pretty obvious from
reading the code that this is shifting elements of an array
to the left, which needs memmove.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
bash: don't offer remote transport helpers as subcommands
Since commits a2d725b7 (Use an external program to implement fetching
with curl, 2009-08-05) and c9e388bb (Make the
"traditionally-supported" URLs a special case, 2009-09-03) remote
transport helpers like 'remote-ftp' and 'remote-curl' are offered by the
completion script as available subcommands. Not good, since they are
helpers, therefore should not be offered, so filter them out.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de> Acked-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The caller will say "It is not a valid object name" if it wants to, and
some callers may even try to see if it names an object and otherwise try to
see if it is a path.
approxidate_careful() reports errorneous date string
For a long time, the time based reflog syntax (e.g. master@{yesterday})
didn't complain when the "human readable" timestamp was misspelled, as
the underlying mechanism tried to be as lenient as possible. The funny
thing was that parsing of "@{now}" even relied on the fact that anything
not recognized by the machinery returned the current timestamp.
Introduce approxidate_careful() that takes an optional pointer to an
integer, that gets assigned 1 when the input does not make sense as a
timestamp.
As I am too lazy to fix all the callers that use approxidate(), most of
the callers do not take advantage of the error checking, but convert the
code to parse reflog to use it as a demonstration.
git-cvsserver: allow regex metacharacters in CVSROOT
When run in a repository with a path name containing regex metacharacters
(e.g. +), git-cvsserver failed to split the client request into CVSROOT
and module. Now metacharacters are disabled for the value of CVSROOT in
the perl regex so that directory names containing metacharacters are
handled properly.
Signed-off-by: Gerrit Pape <pape@smarden.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
builtin-config: Fix crash when using "-f <relative path>" from non-root dir
When your current directory is not at the root of the working tree, and you
use the "-f" option with a relative path, the current code tries to read
from a wrong file, since argv[2] is now beyond the end of the rearranged
argument list.
This patch replaces the incorrect argv[2] with the variable holding the
given config file name.
The bug was introduced by d64ec16 (git config: reorganize to use parseopt).
[jc: added test]
Signed-off-by: Johan Herland <johan@herland.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge branch 'maint' of git://git.spearce.org/git-gui into maint
* 'maint' of git://git.spearce.org/git-gui:
git-gui: work from the .git dir
git-gui: Fix applying a line when all following lines are deletions
git-gui: Correct file_states when unstaging partly staged entry
git-gui: Fix gitk for branch whose name matches local file
git-gui: Keep repo_config(gui.recentrepos) and .gitconfig in sync
git-gui: handle really long error messages in updateindex.
git-gui: Add hotkeys for "Unstage from commit" and "Revert changes"
git-gui: Makefile: consolidate .FORCE-* targets
git-gui: Fix applying a line when all following lines are deletions
If a diff looked like:
@@
context
-del1
-del2
and you wanted to stage the deletion 'del1', the generated patch
wouldn't apply because it was missing the line 'del2' converted to
context, but this line was counted in the @@-line
Signed-off-by: Jeff Epler <jepler@unpythonic.net> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
git-gui: Correct file_states when unstaging partly staged entry
When unstaging a partly staged file or submodule, the file_states
list was not updated properly (unless unstaged linewise). Its
index_info part did not contain the former head_info as it should
have but kept its old value.
This seems not to have had any bad effects but diminishes the value
of the file_states list for future enhancements.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
git-gui: Fix gitk for branch whose name matches local file
When trying to run gitk on a branch name whose name matches a local
file, it will toss an error saying that the name is ambiguous. Adding
a pair of dashes will make gitk parse the options to the left of
it as branch names. Since wish eats the first pair of dashes we
throw at it, we need to add a second one to ensure they get through.
Signed-off-by: Peter Krefting <peter@softwolves.pp.se> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
git-gui: Keep repo_config(gui.recentrepos) and .gitconfig in sync
When the number of recent repo's gets to ten there can be a
situation where an item is removed from the .gitconfig file via
a call to git config --unset, but the internal representation of
that file (repo_config(gui.recentrepo)) is not updated. Then a
subsequent attempt to remove an item from the list fails because
git-gui attempts to call --unset on a value that has already
been removed. This leads to duplicates in the .gitconfig file,
which then also cause errors if the git-gui tries to --unset them
(rather than using --unset-all. --unset-all is not used because it
is not expected that duplicates should ever be allowed to exist.)
When loading the list of recent repositories (proc _get_recentrepos)
if a repo in the list is not considered a valid git reposoitory
then we should go ahead and remove it so it doesn't take up a slot
in the list (since we limit to 10 items). This will prevent a bunch
of invalid entries in the list (which are not shown) from making
valid entries dissapear off the list even when there are less than
ten valid entries.
See: http://code.google.com/p/msysgit/issues/detail?id=362 Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
git-gui: handle really long error messages in updateindex.
As reported to msysGit (bug #340) it is possible to get some very
long error messages when updating the index. The use of a label to
display this prevents scrolling the output. This patch replaces the
label with a scrollable text widget configured to look like a label.
Signed-off-by: Pat Thoyts <patthoyts@users.sourceforge.net> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
The function takes two paths, an early part of abs is supposed to match
base; otherwise abs is not a path under base and the function returns the
full path of abs. The caller can easily confuse the implementation by
giving duplicated and needless slashes in these path arguments.
Credit for test script, motivation and initial patch goes to Thomas Rast.
A follow-up fix (squashed) is by Hannes.
merge-recursive: do not return NULL only to cause segfault
merge-recursive calls write_tree_from_memory() to come up with a virtual
tree, with possible conflict markers inside the blob contents, while
merging multiple common ancestors down. It is a bug to call the function
with unmerged entries in the index, even if the merge to come up with the
common ancestor resulted in conflicts. Otherwise the result won't be
expressible as a tree object.
We _might_ want to suggest the user to set GIT_MERGE_VERBOSITY to 5 and
re-run the merge in the message. At least we will know which part of
process_renames() or process_entry() functions is not correctly handling
the unmerged paths, and it might help us diagnosing the issue.
retry request without query when info/refs?query fails
When "info/refs" is a static file and not behind a CGI handler, some
servers may not handle a GET request for it with a query string
appended (eg. "?foo=bar") properly.
If such a request fails, retry it sans the query string. In addition,
ensure that the "smart" http protocol is not used (a service has to be
specified with "?service=<service name>" to be conformant).
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com> Reported-and-tested-by: Yaroslav Halchenko <debian@onerussian.com> Acked-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix "log" family not to be too agressive about showing notes
Giving "Notes" information in the default output format of "log" and
"show" is a sensible progress (the user has asked for it by having the
notes), but for some commands (e.g. "format-patch") spewing notes into the
formatted commit log message without being asked is too aggressive.
Enable notes output only for "log", "show", "whatchanged" by default and
only when the user didn't ask any specific --pretty/--format from the
command line; users can explicitly override this default with --show-notes
and --no-notes option.
Parts of tests are taken from Jeff King's fix.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* bg/maint-add-all-doc:
git-rm doc: Describe how to sync index & work tree
git-add/rm doc: Consistently back-quote
Documentation: 'git add -A' can remove files
status: don't require the repository to be writable
We need to update the index before hooks run when actually making a
commit, but we shouldn't have to write the index when running "status".
If we can, then we have already spent cycles to refresh the index and
it is a waste not to write it out, but it is not a disaster if we cannot
write it out. The main reason the user is running "git status" is to get
the "status", and refreshing the index is a mere side effect that we can
do without.
* maint-1.6.4:
Fix mis-backport of t7002
base85: Make the code more obvious instead of explaining the non-obvious
base85: encode_85() does not use the decode table
base85 debug code: Fix length byte calculation
checkout -m: do not try to fall back to --merge from an unborn branch
branch: die explicitly why when calling "git branch [-a|-r] branchname".
textconv: stop leaking file descriptors
commit: --cleanup is a message option
git count-objects: handle packs bigger than 4G
t7102: make the test fail if one of its check fails
* maint-1.6.3:
base85: Make the code more obvious instead of explaining the non-obvious
base85: encode_85() does not use the decode table
base85 debug code: Fix length byte calculation
checkout -m: do not try to fall back to --merge from an unborn branch
branch: die explicitly why when calling "git branch [-a|-r] branchname".
textconv: stop leaking file descriptors
commit: --cleanup is a message option
git count-objects: handle packs bigger than 4G
t7102: make the test fail if one of its check fails
* maint-1.6.2:
base85: Make the code more obvious instead of explaining the non-obvious
base85: encode_85() does not use the decode table
base85 debug code: Fix length byte calculation
checkout -m: do not try to fall back to --merge from an unborn branch
branch: die explicitly why when calling "git branch [-a|-r] branchname".
textconv: stop leaking file descriptors
commit: --cleanup is a message option
git count-objects: handle packs bigger than 4G
t7102: make the test fail if one of its check fails
The original patch that became cfe370c (grep: do not segfault when -f is
used, 2009-10-16), was made against "maint" or newer branch back then, but
the fix addressed the issue that was present as far as in 1.6.4 series.
The maintainer backported the patch to the 1.6.4 maintenance branch, but
failed to notice that the new tests assumed the setup done by the script
in "maint", which did quite a lot more than the same test script in 1.6.4
series, and the output didn't match the expected result.
Internally "git grep" runs regexec(3) that expects its input string
to be NUL terminated. When searching inside blob data, read_sha1_file()
automatically gives such a buffer, but builtin-grep.c forgot to put
the NUL at the end, even though it allocated enough space for it.
Signed-off-by: Jim Meyering <meyering@redhat.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>