Free the root tree object buffer when we're done, plugging a minor leak
in generate_tar(). Note: we cannot simply free(tree.buf) because this
pointer is modified by tree_entry() calls in traverse_tree().
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <junkio@cox.net>
Most usage strings, such as for command xxx, start with "git-xxx".
This updates the rebels to conform to the general pattern.
(The git wrapper is an exception to this, of course ...)
Signed-off-by: Ramsay Allan Jones <ramsay@ramsay1.demon.co.uk> Signed-off-by: Junio C Hamano <junkio@cox.net>
We ended up merging too many stuff after -rc2, so here is
another round of release candidate. Non bugfixes will be
queued to "next" from now on until a real 1.4.2 happens.
Earlier we deliberately showed only blob1's name because showing
both names labeled the output as a renaming patch. Now the output
routine (namely, diff.c::resolve_rename_copy()) is taught not to
use pathname comparison to tell if a filepair is a rename, we can
safely do this change.
diff.c: do not use pathname comparison to tell renames
The final output from diff used to compare pathnames between
preimage and postimage to tell if the filepair is a rename/copy.
By explicitly marking the filepair created by diffcore_rename(),
the output routine, resolve_rename_copy(), does not have to do
so anymore. This helps feeding a filepair that has different
pathnames in one and two elements to the diff machinery (most
notably, comparing two blobs).
We still have too few of them, but we have to start from somewhere.
The general rule is to make tests easy to debug when run with -v (notice
use of seemingly useless echo everywhere in the new tests).
This was already documented in the options section of the manpage. This
patch implements it, adds it to the usage message, and mentions it at the
top of the manpage.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <junkio@cox.net>
Remove cmd_usage() routine and re-organize the help/usage code.
The cmd_usage() routine was causing warning messages due to a NULL
format parameter being passed in three out of four calls. This is a
problem if you want to compile with -Werror. A simple solution is to
simply remove the GNU __attribute__ format pragma from the cmd_usage()
declaration in the header file. The function interface was somewhat
muddled anyway, so re-write the code to finesse the problem.
[jc: this incidentally revealed that t9100 test assumed that the output
from "git help" to be fixed in stone, but this patch lower-cases
"Usage" to "usage". Update the test not to rely on "git help" output.]
Signed-off-by: Ramsay Allan Jones <ramsay@ramsay1.demon.co.uk> Signed-off-by: Junio C Hamano <junkio@cox.net>
The header builtin.h was, incorrectly, redefining PATH_MAX which
causes a header order dependency in builtin-write-tree.c. The fix
is to simply include <limits.h> directly to obtain the correct
definition of PATH_MAX.
Signed-off-by: Ramsay Allan Jones <ramsay@ramsay1.demon.co.uk> Signed-off-by: Junio C Hamano <junkio@cox.net>
The NO_C99_FORMAT macro allows compilers that lack support for the
ll,hh,j,z,t size specifiers (eg. gcc 2.95.2) to adapt the code to avoid
runtime errors in the formatted IO functions.
Signed-off-by: Ramsay Allan Jones <ramsay@ramsay1.demon.co.uk> Signed-off-by: Junio C Hamano <junkio@cox.net>
These changes were originally part of the next patch, but have been
split out since they were peripheral to the main purpose of that patch.
- update comment describing the signature format to reflect
the current code.
- remove trailing \n in calls to error(), since a \n is already
provided by error().
- remove redundant call to get_sha1_hex().
- call sha1_to_hex(sha1) to convert to ascii, rather than attempting
to print the raw sha1.
The new tests provide a regression suite to support the modifications
to git-mktag in this and the next patch.
Signed-off-by: Ramsay Allan Jones <ramsay@ramsay1.demon.co.uk> Signed-off-by: Junio C Hamano <junkio@cox.net>
Fix annotate test script; notice when git-annotate fails.
The t8001-annotate.sh test claimed all tests pass, when in fact
the git-annotate perl script failed to run! (prior to fixing the
script to work with perl 5.5).
Signed-off-by: Ramsay Allan Jones <ramsay@ramsay1.demon.co.uk> Signed-off-by: Junio C Hamano <junkio@cox.net>
Ensure git-clone exits with error if perl script fails.
This helps tests 5400,5600,5700,5710 "fail correctly" rather than
give some false positives. Also ensure cleanup actions in exit trap
work correctly even if user has alias rm='rm -i'.
Signed-off-by: Ramsay Allan Jones <ramsay@ramsay1.demon.co.uk> Signed-off-by: Junio C Hamano <junkio@cox.net>
fetch/clone: mark messages from remote side stand out.
When dealing with a corrupt or out of sync remote repository,
the user often gets error messages like this:
error: refs/heads/devel does not point to a valid commit object!
which leaves the user wondering if the breakage is on the local
end or on the remote end. This is unnecessarily alarming.
This patch changes the way we display messages received from the
remote side over the git protocol sideband (i.e. stderr stream
of the remote process). It shows them with blue background with
white letters, but this presentation is subject to proposals of
better ways from the list.
* rs/rebase:
rebase: Make the fast-fowarding message more user-friendly by using branch names instead of SHA1 IDs.
rebase: Fix the detection of fast-forwarding of the current branch to upstream.
Builtins: control the use of pager from the command table.
This moves the built-in "always-use-pager" logic for log family
to the command dispatch table of git wrapper. This makes it
easier to change the default use of pager, and has an added
benefit that we fork and exec the pager early before packs are
mmapped.
Pointed out by Juergen Ruehle <j.ruehle@bmiag.de>.
Fix up some fallout from "setup_git_directory()" cleanups
git-ls-files was broken by the setup_git_directory() calling changes,
because I had missed the fact that the "prefix" variable in that file was
static to the whole file, and unlike git-ls-tree (where I had fixed it
up), it ended up using two different variables with the same name
depending on what the scoping happened to be.
This fixes it up properly (by just removing the static variable, and
passing the automatic one around properly), and git-ls-files should work
again.
Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
Doing an "strace" on "git diff" shows that we close() a file descriptor
twice (getting EBADFD on the second one) when we end up in ce_compare_data
if the index does not match the checked-out stat information.
The "index_fd()" function will already have closed the fd for us, so we
should not close it again.
Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
rebase: Fix the detection of fast-forwarding of the current branch to upstream.
Previously, a rebasing operation with on a branch that is just tracking
an upstream branch would output a confusing "Nothing to do" due to no
patches being given to git-am.
setup_git_directory_gently: do not barf when GIT_DIR is given.
Earlier we barfed when GIT_DIR environment variable points at a
directory yet to be created, which made it impossible to use
configuration mechanism in "git-init-db".
Signed-off-by: Matthias Lederhofer <matled@gmx.net> Signed-off-by: Junio C Hamano <junkio@cox.net>
* lt/web:
gitweb.cgi: git_blame2: slight optimization reading the blame lines
gitweb.cgi: git_blame2: Revision blocks now have alternating colors
gitweb.cgi: git_blame2: Allow back-trekking through commits
gitweb.cgi: git_blame2: an alternative simple working git blame
* jn/make:
Set datarootdir in config.mak.in
Quote all calls to GIT_CONF_APPEND_LINE
Typofix in configure.ac comment.
configure.ac vertical whitespace usage cleanup
autoconf: Checks for some programs
autoconf: Checks for libraries
autoconf: Checks for some library functions.
autoconf: Checks for typedefs, structures, and compiler characteristics.
autoconf: Preparing the way for autodetection
Copy description of build configuration variables to configure.ac
Teach make clean about configure and autoconf
autoconf: Use autoconf to write installation directories to config.mak.autogen
This changes the calling convention of built-in commands and
passes the "prefix" (i.e. pathname of $PWD relative to the
project root level) down to them.
Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
Any git command that expects to work in a subdirectory of a project, and
that reads the git config files (which is just about all of them) needs to
make sure that it does the "setup_git_directory()" call before it tries to
read the config file.
This means, among other things, that we need to move the call out of
"init_revisions()", and into the caller.
This does the mostly trivial conversion to do that.
Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
Display an error from update-ref if target ref name is invalid.
Alex Riesen (raa.lkml@gmail.com) recently observed that git branch
would fail with no error message due to unexpected situations with
regards to refs. For example, if .git/refs/heads/gu is a file but
"git branch -b refs/heads/gu/fixa HEAD" was invoked by the user
it would fail silently due to refs/heads/gu being a file and not
a directory.
This change adds a test for trying to create a ref within a directory
that is actually currently a file, and adds error printing within
the ref locking routine should the resolve operation fail.
The error printing code probably belongs at this level of the library
as other failures within the ref locking, writing and logging code
are also currently at this level of the code.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
* pb/multi-fetch:
Teach git-http-fetch the --stdin switch
Teach git-local-fetch the --stdin switch
Make pull() support fetching multiple targets at once
Make pull() take some implicit data as explicit arguments
The generated binary patch was _not_ binary -- earlier I made
the --full-index flag to imply binary patch generation to the diff
machinery, but later we made it independent from --binary (although
the latter implies the former).
log and diff family: honor config even from subdirectories
There currently is an unfortunate circular dependency between
what init_revisions (the command line revision specification
parser) does and setting up the log and diff options. The
function uses setup_git_directory() to find the root of the
project relative to the current directory and calls diff_setup()
to prepare diff generation. However, some of the things that
diff_setup() does needs to depend on the configuration variable,
which needs to be read after setup_git_directory() is called.
This patch is a low impact workaround. It first lets
init_revisions() to run and do its thing, then uses git_config()
and diff_setup() after it returns, so that configuration
variables that affects the diff operation can be used from
subdirectories.
Make pull() take some implicit data as explicit arguments
Currently it's a bit weird that pull() takes a single argument
describing the commit but takes the write_ref from a global variable.
This makes it take that as a parameter as well, which might be nicer
for the libification in the future, but especially it will make for
nicer code when we implement pull()ing multiple commits at once.
Signed-off-by: Petr Baudis <pasky@suse.cz> Signed-off-by: Junio C Hamano <junkio@cox.net>
git-update-ref writes into the lockfile, and renames it afterwards. Like
commit v1.3.0-rc3~22, it is not only cleaner, but also helps with shared
setups: every developer can have a different primary group; what matters
is that $GIT_DIR/refs/heads has to be writable by a group you are in.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: Junio C Hamano <junkio@cox.net>
This fixes the builtin mv for the test which Josef provided, and also
fixes moving directories into existing directories, as noted by Jon Smirl.
In case the destination exists, fail early (this cannot be overridden
by -f).
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: Junio C Hamano <junkio@cox.net>
git wrapper: add --git-dir=<path> and --bare options
With this, you can say
git --bare repack -a -d
inside a bare repository, and it will actually work. While at it,
also move the --version, --help and --exec-path options to the
handle_options() function.
While at documenting the new options, also document the --paginate
option.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: Junio C Hamano <junkio@cox.net>
Turns out that DBD::SQLite does not favour preparing statements which are
never executed. So, turn all 4 statements, which were prepared _always_,
into methods, like the other 12 prepared statements.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: Junio C Hamano <junkio@cox.net>
This patch defines $state->{prependdir} as the empty string, so that
quite a few warnings are avoided.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de> Acked-by: Martin Langhoff <martin@catalyst.net.nz> Signed-off-by: Junio C Hamano <junkio@cox.net>
I have a tag with a comment which includes an & character. Firefox wouldn't
display my gitweb summary page due to malformed XML. This solves the problem.
Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
* jt/format-patch:
builtin-log: typefix for recent format-patch changes.
Add option to set initial In-Reply-To/References
Add option to enable threading headers
git-format-patch: Make the second and subsequent mails replies to the first
* ew/apply:
Fix t4114 on cygwin
apply: handle type-changing patch correctly.
apply: split out removal and creation into different phases.
apply: check D/F conflicts more carefully.
typechange tests for git apply (currently failing)