When "git rebase" prepared an mailbox of changes and fed it to "git
am" to replay them, it was confused when a stray "From " happened
to be in the log message of one of the replayed changes. This has
been corrected.
* ew/rebase-mboxrd:
rebase: use mboxrd format to avoid split errors
"git add --renormalize ." is a new and safer way to record the fact
that you are correcting the end-of-line convention and other
"convert_to_git()" glitches in the in-repository data.
The sequencer machinery (used by "git cherry-pick A..B", and "git
rebase -i", among other things) would have lost a commit if stopped
due to an unlockable index file, which has been fixed.
* pw/sequencer-recover-from-unlockable-index:
sequencer: reschedule pick if index can't be locked
The three-way merge performed by "git cherry-pick" was confused
when a new submodule was added in the meantime, which has been
fixed (or "papered over").
* sb/test-cherry-pick-submodule-getting-in-a-way:
merge-recursive: handle addition of submodule on our side of history
t/3512: demonstrate unrelated submodule/file conflict as cherry-pick failure
Teach "sendemail.tocmd" to places that know about "sendemail.to",
like documentation and shell completion (in contrib/).
* rv/sendemail-tocmd-in-config-and-completion:
completion: add git config sendemail.tocmd
Documentation/config: add sendemail.tocmd to list preceding "See git-send-email(1)"
* av/fsmonitor:
fsmonitor: simplify determining the git worktree under Windows
fsmonitor: store fsmonitor bitmap before splitting index
fsmonitor: read from getcwd(), not the PWD environment variable
fsmonitor: delay updating state until after split index is merged
fsmonitor: document GIT_TRACE_FSMONITOR
fsmonitor: don't bother pretty-printing JSON from watchman
fsmonitor: set the PWD to the top of the working tree
We learned to talk to watchman to speed up "git status" and other
operations that need to see which paths have been modified.
* bp/fsmonitor:
fsmonitor: preserve utf8 filenames in fsmonitor-watchman log
fsmonitor: read entirety of watchman output
fsmonitor: MINGW support for watchman integration
fsmonitor: add a performance test
fsmonitor: add a sample integration script for Watchman
fsmonitor: add test cases for fsmonitor extension
split-index: disable the fsmonitor extension when running the split index test
fsmonitor: add a test tool to dump the index extension
update-index: add fsmonitor support to update-index
ls-files: Add support in ls-files to display the fsmonitor valid bit
fsmonitor: add documentation for the fsmonitor extension.
fsmonitor: teach git to optionally utilize a file system monitor to speed up detecting new or changed files.
update-index: add a new --force-write-index option
preload-index: add override to enable testing preload-index
bswap: add 64 bit endianness helper get_be64
Merge branch 'rs/sequencer-rewrite-file-cleanup' into maint
Code cleanup.
* rs/sequencer-rewrite-file-cleanup:
sequencer.c: check return value of close() in rewrite_file()
sequencer: use O_TRUNC to truncate files
sequencer: factor out rewrite_file()
Let's make it clear how patches should flow into
contrib/git-jump. The normal Git maintainer does not
necessarily care about things in contrib/, and authors of
individual components should be the ones giving the final
review/ack for a patch. Ditto for bug reports, which are
likely to get more attention from the area expert.
Signed-off-by: Jeff King <peff@peff.net> Reviewed-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
contrib/git-jump: allow to configure the grep command
Add the configuration option "jump.grepCmd" that allows to configure the
command that is used to search in grep mode. This allows the users of
git-jump to use ag(1) or ack(1) as search engines.
Signed-off-by: Beat Bolli <dev+git@drbeat.li> Reviewed-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
d9bd4cbb9cc (config: flip return value of store_write_*()) made
write_section() follow the convention of write(2) to return -1 on error
and the number of written bytes on success. 3b48045c6c7 (Merge branch
'sd/branch-copy') changed it back to returning 0 on error and 1 on
success, but left its callers still checking for negative values.
Let write_section() follow the convention of write(2) again to meet the
expectations of its callers.
Reported-by: Jeff King <peff@peff.net> Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some diff implementations don't report missing newlines at the end of
files. Applying such a patch can cause a newline character to be
added inadvertently. The option --inaccurate-eof of git apply can be
used to remove trailing newlines if needed.
apply_one_fragment() cuts it off from the buffers for preimage and
postimage. Before it does, it builds an array with the lengths of each
line for both. Make sure to update the length of the last line in
these line info structures as well to keep them consistent with their
respective buffer.
Without this fix the added test fails; git apply dies and reports:
In 52d59cc645 (branch: add a --copy (-c) option to go with --move (-m),
2017-06-18), `git branch` learned a `--copy` option. Include it when
providing command completions.
Signed-off-by: Todd Zullinger <tmz@pobox.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
sequencer: reschedule pick if index can't be locked
If the index cannot be locked in do_recursive_merge(), issue an
error message and go on to the error recovery codepath, instead of
dying. When the commit cannot be picked, it needs to be rescheduled
when performing an interactive rebase, but just dying there won't
allow that to happen, and when the user runs 'git rebase --continue'
rather than 'git rebase --abort', the commit gets silently dropped.
As explained in commit 06f46f237 (avoid "write_in_full(fd, buf, len)
!= len" pattern, 2017–09–13) the return value of write_in_full() is
either -1 or the requested number of bytes. As such comparing the
return value to an unsigned value such as strbuf.len will fail to
catch errors. Change the code to use the preferred '< 0' check.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk> Signed-off-by: Junio C Hamano <gitster@pobox.com>
merge-recursive: handle addition of submodule on our side of history
The code for a newly added path assumed that the path was a normal file,
and thus checked for there being a directory still being in the way of
the file. Note that since unpack_trees() does path-in-the-way checks
already, the only way for there to be a directory in the way at this
point in the code, is if there is some kind of D/F conflict in the merge.
For a submodule addition on HEAD's side of history, the submodule would
have already been present. This means that we do expect there to be a
directory present but should not consider it to be "in the way"; instead,
it's the expected submodule. So, when there's a submodule addition from
HEAD's side, don't bother checking the working copy for a directory in
the way.
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git bisect run" that did not specify any command to run used to go
ahead and treated all commits to be tested as 'good'. This has
been corrected by making the command error out.
* sb/bisect-run-empty:
bisect run: die if no command is given
The remote-helper for talking to MediaWiki has been updated to
work with mediawiki namespaces.
* ab/mediawiki-namespace:
remote-mediawiki: show progress while fetching namespaces
remote-mediawiki: process namespaces in order
remote-mediawiki: support fetching from (Main) namespace
remote-mediawiki: skip virtual namespaces
remote-mediawiki: show known namespace choices on failure
remote-mediawiki: allow fetching namespaces with spaces
remote-mediawiki: add namespace support
The "--format=..." option "git for-each-ref" takes learned to show
the name of the 'remote' repository and the ref at the remote side
that is affected for 'upstream' and 'push' via "%(push:remotename)"
and friends.
* js/for-each-ref-remote-name-and-ref:
for-each-ref: test :remotename and :remoteref
for-each-ref: let upstream/push report the remote ref name
for-each-ref: let upstream/push optionally report the remote name
* mh/tidy-ref-update-flags:
refs: update some more docs to use "oid" rather than "sha1"
write_packed_entry(): take `object_id` arguments
refs: rename constant `REF_ISPRUNING` to `REF_IS_PRUNING`
refs: rename constant `REF_NODEREF` to `REF_NO_DEREF`
refs: tidy up and adjust visibility of the `ref_update` flags
ref_transaction_add_update(): remove a check
ref_transaction_update(): die on disallowed flags
prune_ref(): call `ref_transaction_add_update()` directly
files_transaction_prepare(): don't leak flags to packed transaction
* ma/bisect-leakfix:
bisect: fix memory leak when returning best element
bisect: fix off-by-one error in `best_bisection_sorted()`
bisect: fix memory leak in `find_bisection()`
bisect: change calling-convention of `find_bisection()`
* rs/sequencer-rewrite-file-cleanup:
sequencer.c: check return value of close() in rewrite_file()
sequencer: use O_TRUNC to truncate files
sequencer: factor out rewrite_file()
Recent update to the refs infrastructure implementation started
rewriting packed-refs file more often than before; this has been
optimized again for most trivial cases.
* mh/avoid-rewriting-packed-refs:
files-backend: don't rewrite the `packed-refs` file unnecessarily
t1409: check that `packed-refs` is not rewritten unnecessarily
Merge branch 'js/mingw-redirect-std-handles' into maint
MinGW updates.
* js/mingw-redirect-std-handles:
mingw: document the standard handle redirection
mingw: optionally redirect stderr/stdout via the same handle
mingw: add experimental feature to redirect standard handles
Merge branch 'dk/libsecret-unlock-to-load-fix' into maint
The credential helper for libsecret (in contrib/) has been improved
to allow possibly prompting the end user to unlock secrets that are
currently locked (otherwise the secrets may not be loaded).
"git check-ref-format --branch @{-1}" bit a "BUG()" when run
outside a repository for obvious reasons; clarify the documentation
and make sure we do not even try to expand the at-mark magic in
such a case, but still call the validation logic for branch names.
* jc/check-ref-format-oor:
check-ref-format doc: --branch validates and expands <branch>
check-ref-format --branch: strip refs/heads/ using skip_prefix
check-ref-format --branch: do not expand @{...} outside repository
Merge branch 'js/submodule-in-excluded' into maint
"git status --ignored -u" did not stop at a working tree of a
separate project that is embedded in an ignored directory and
listed files in that other project, instead of just showing the
directory itself as ignored.
* js/submodule-in-excluded:
status: do not get confused by submodules in excluded directories
Merge branch 'sb/diff-color-moved-use-xdl-recmatch' into maint
Instead of using custom line comparison and hashing functions to
implement "moved lines" coloring in the diff output, use the pair
of these functions from lower-layer xdiff/ code.
* sb/diff-color-moved-use-xdl-recmatch:
diff.c: get rid of duplicate implementation
xdiff-interface: export comparing and hashing strings
The experimental "color moved lines differently in diff output"
feature was buggy around "ignore whitespace changes" edges, whihch
has been corrected.
* jk/diff-color-moved-fix:
diff: handle NULs in get_string_hash()
diff: fix whitespace-skipping with --color-moved
t4015: test the output of "diff --color-moved -b"
t4015: check "negative" case for "-w --color-moved"
t4015: refactor --color-moved whitespace test
Merge branch 'kd/auto-col-with-pager-fix' into maint
"auto" as a value for the columnar output configuration ought to
judge "is the output consumed by humans?" with the same criteria as
"auto" for coloured output configuration, i.e. either the standard
output stream is going to tty, or a pager is in use. We forgot the
latter, which has been fixed.
* kd/auto-col-with-pager-fix:
column: do not include pager.c
column: show auto columns when pager is active
notes: send "Automatic notes merge failed" messages to stderr
All other error messages from notes use stderr. Do the same when
alerting users of an unresolved notes merge.
Fix the output redirection in t3310 and t3320 as well. Previously, the
tests directed output to a file, but stderr was either not captured or
not sent to the file due to the order of the redirection operators.
Signed-off-by: Todd Zullinger <tmz@pobox.com> Acked-by: Johan Herland <johan@herland.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The intention is to ignore all output from the 'git stash apply' call.
Adjust the order of the redirection to ensure that both stdout and
stderr are redirected to /dev/null.
Signed-off-by: Todd Zullinger <tmz@pobox.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t/lib-gpg: fix gpgconf stderr redirect to /dev/null
In 29ff1f8f74 (t: lib-gpg: flush gpg agent on startup, 2017-07-20), a
call to gpgconf was added to kill the gpg-agent. The intention was to
ignore all output from the call, but the order of the redirection needs
to be switched to ensure that both stdout and stderr are redirected to
/dev/null. Without this, gpgconf from gnupg-2.0 releases would output
'gpgconf: invalid option "--kill"' each time it was called.
Signed-off-by: Todd Zullinger <tmz@pobox.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The set of paths output from "git status --ignored" was tied
closely with its "--untracked=<mode>" option, but now it can be
controlled more flexibly. Most notably, a directory that is
ignored because it is listed to be ignored in the ignore/exclude
mechanism can be handled differently from a directory that ends up
to be ignored only because all files in it are ignored.
* jm/status-ignored-files-list:
status: test ignored modes
status: document options to show matching ignored files
status: report matching ignored and normal untracked
status: add option to show ignored files differently
If an empty string is passed to link_alt_odb_entries(), our
loop finds no entries and we link nothing. But we still do
some preparatory work to normalize the object directory
path, even though we'll never look at the result. This
triggers in basically every git process, since we feed the
usually-empty ALTERNATE_DB_ENVIRONMENT to the function.
Let's detect early that there's nothing to do and return.
While we're at it, let's treat NULL the same as an empty
string as a favor to our callers. That saves
prepare_alt_odb() from having to cover this case.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Documentation: convert SubmittingPatches to AsciiDoc
The SubmittingPatches document is often cited by outside parties as an
example of good practices to follow, including logical, independent
commits; patch sign-offs; and sending patches to a mailing list.
Currently, people who want to cite a particular section tend to either
refer to it by name and let the interested party search through the
document to find it, or link to a given line number on GitHub and hope
the file doesn't change.
Instead, convert the document to AsciiDoc. Build it as part of the
technical documentation, since it is likely of interest to the same
group of people. Provide stable links to the sections which outside
parties are likely to want to link to. Make some minor structural
changes to organize it so that it can be formatted sanely.
Since the makefile needs a .txt extension in order to build with the
rest of the documentation, simply copy the file. Ignore the temporary
file so it doesn't get checked in accidentally, and remove it as part of
the clean process. Do this instead of renaming the file so that people
who have already linked to the documentation (who we're trying to help)
don't find their links broken. Avoid symlinking since Windows will not
like that.
This allows us to render the document as part of the website for the
benefit of others who wish to link to it as well as providing a more
nicely formatted display for our community and potential contributors.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
It was possible to invoke "git bisect run" without any command.
This considers all commits as good commits since "$@"'s return
value for empty $@ is 0.
This is most probably not what a user wants (otherwise she would
invoke "git bisect run true"), so not providing a command now
results in an error.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
If you have a pcre1 library which is compiled with JIT enabled then
PCRE_STUDY_JIT_COMPILE will be defined whether or not the
NO_LIBPCRE1_JIT configuration is set.
This means that we enable JIT functionality when calling pcre_study
even if NO_LIBPCRE1_JIT has been explicitly set and we just use plain
pcre_exec later.
Fix this by using own macro (GIT_PCRE_STUDY_JIT_COMPILE) which we set to
PCRE_STUDY_JIT_COMPILE only if NO_LIBPCRE1_JIT is not set and define to
0 otherwise, as before.
Reviewed-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t4201: make use of abbreviation in the test more robust
The test for '--abbrev' in t4201-shortlog.sh assumes that the commits
generated in the test can always be uniquely abbreviated to 5 hex digits
but this is not always the case. If you were unlucky and happened to run
the test at (say) Thu Jun 22 03:04:49 2017 +0000, you would find that
the first commit generated would collide with a tree object created
later in the same test.
This can be simulated in the version of t4201-shortlog.sh prior to this
commit by setting GIT_COMMITTER_DATE and GIT_AUTHOR_DATE to 1498100689
after sourcing test-lib.sh.
Change the test to test --abbrev=35 instead of --abbrev=5 to almost
completely avoid the possibility of a partial collision and add a call
to test_tick in the setup to make the test repeatable (the latter alone
is sufficient to make it robust enough).
Signed-off-by: Charles Bailey <cbailey32@bloomberg.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
fsmonitor: simplify determining the git worktree under Windows
Simplify and speed up the process of finding the git worktree when
running on Windows by keeping it in perl and avoiding spawning helper
processes.
Signed-off-by: Ben Peart <benpeart@microsoft.com> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>