* jc/rev-list:
rev-list --objects: use full pathname to help hashing.
rev-list --objects-edge: remove duplicated edge commit output.
rev-list --objects-edge
* jc/pack-thin:
pack-objects: hash basename and direname a bit differently.
pack-objects: allow "thin" packs to exceed depth limits
pack-objects: use full pathname to help hashing with "thin" pack.
pack-objects: thin pack micro-optimization.
Use thin pack transfer in "git fetch".
Add git-push --thin.
send-pack --thin: use "thin pack" delta transfer.
Thin pack - create packfile with missing delta base.
Conflicts:
pack-objects.c (manual adjustment for thin pack needed)
send-pack.c
Make git-ls-files --others --ignored recurse into non-excluded
subdirectories.
Typically when asking git-ls-files to display all files which are
ignored by one or more exclude patterns one would want it to recurse
into subdirectories which are not themselves excluded to see if
there are any excluded files contained within those subdirectories.
rev-list --objects: use full pathname to help hashing.
This helps to group the same files from different revs together,
while spreading files with the same basename in different
directories, to help pack-object.
pack-objects: allow "thin" packs to exceed depth limits
When creating a new pack to be used in .git/objects/pack/
directory, we carefully count the depth of deltified objects to
be reused, so that the generated pack does not to exceed the
specified depth limit for runtime efficiency. However, when we
are generating a thin pack that does not contain base objects,
such a pack can only be used during network transfer that is
expanded on the other end upon reception, so being careful and
artificially cutting the delta chain does not buy us anything
except increased bandwidth requirement. This patch disables the
delta chain depth limit check when reusing an existing delta.
gitview: Display the lines joining commit nodes clearly.
Since i wanted to limit the graph box size i was resetting
the window after an index of 5. This result in line joining
commit nodes to pass over nodes which are not related. The
changes fixes the same
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@gmail.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
pack-objects: use full pathname to help hashing with "thin" pack.
This uses the same hashing algorithm to the "preferred base
tree" objects and the incoming pathnames, to group the same
files from different revs together, while spreading files with
the same basename in different directories.
Since we sort objects by type, hash, preferredness and then
size, after we have a delta against preferred base, there is no
point trying a delta with non-preferred base. This seems to
save expensive calls to diff-delta and it also seems to save the
output space as well.
This implements "eye candy" similar to the pack-object/unpack-object
to entertain users while a large tree is being checked out after
a clone or a pull.
This adds a git-rm command which provides convenience similar to
git-add, (and a bit more since it takes care of the rm as well if
given -f).
Like git-add, git-rm expands the given path names through
git-ls-files. This means it only acts on files listed in the
index. And it does act recursively on directories by default, (no -r
needed as in the case of rm itself). When it recurses, it does not
remove empty directories that are left behind.
git-fetch: follow tag only when tracking remote branch.
Unless --no-tags flag was given, git-fetch tried to always
follow remote tags that point at the commits we picked up.
It is not very useful to pick up tags from remote unless storing
the fetched branch head in a local tracking branch. This is
especially true if the fetch is done to merge the remote branch
into our current branch as one-shot basis (i.e. "please pull"),
and is even harmful if the remote repository has many irrelevant
tags.
This proposed update disables the automated tag following unless
we are storing the a fetched branch head in a local tracking
branch.
If that pack is big, it takes significant time to write and might
benefit from some more eye candies as well. This is however disabled
when the pack is written to stdout since in that case the output is
usually piped into unpack_objects which already does its own progress
reporting.
Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
This provides a stable and simpler progress reporting mechanism that
updates progress as often as possible but accurately not updating more
than once a second. The deltification phase is also made more
interesting to watch (since repacking a big repository and only seeing a
dot appear once every many seconds is rather boring and doesn't provide
much food for anticipation).
Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
Keep Porcelainish from failing by broken ident after making changes.
"empty ident not allowed" error makes commit-tree fail, so we
are already safer in that we would not end up with commit
objects that have bogus names on the author or committer fields.
However, before commit-tree is called there are already changes
made to the index file and the working tree. The operation can
be resumed after fixing the environment problem, but when this
triggers to a newcomer with unusable gecos, the first question
becomes "what did I lose and how would I recover".
This patch modifies some Porcelainish commands to verify
GIT_COMMITTER_IDENT as soon as we know we are going to make some
commits before doing much damage to prevent confusion.
Delay "empty ident" errors until they really matter.
Previous one warned people upfront to encourage fixing their
environment early, but some people just use repositories and git
tools read-only without making any changes, and in such a case
there is not much point insisting on them having a usable ident.
This round attempts to move the error until either "git-var"
asks for the ident explicitly or "commit-tree" wants to use it.
Make "empty ident" error message a bit more helpful.
It appears that some people who did not care about having bogus
names in their own commit messages are bitten by the recent
change to require a sane environment [*1*].
While it was a good idea to prevent people from using bogus
names to create commits and doing sign-offs, the error message
is not very informative. This patch attempts to warn things
upfront and hint people how to fix their environments.
pack-objects: avoid delta chains that are too long.
This tries to rework the solution for the excess delta chain
problem. An earlier commit worked it around ``cheaply'', but
repeated repacking risks unbound growth of delta chains.
This version counts the length of delta chain we are reusing
from the existing pack, and makes sure a base object that has
sufficiently long delta chain does not get deltified.
This introduces --no-reuse-delta option to disable reusing of
existing delta, which is a large part of the optimization
introduced by this series. This may become necessary if
repeated repacking makes delta chain too long. With this, the
output of the command becomes identical to that of the older
implementation. But the performance suffers greatly.
It still allows reusing non-deltified representations; there is
no point uncompressing and recompressing the whole text.
It also adds a couple more statistics output, while squelching
it under -q flag, which the last round forgot to do.
$ time old-git-pack-objects --stdout >/dev/null <RL
Generating pack...
Done counting 184141 objects.
Packing 184141 objects....................
real 12m8.530s user 11m1.450s sys 0m57.920s
$ time git-pack-objects --stdout >/dev/null <RL
Generating pack...
Done counting 184141 objects.
Packing 184141 objects.....................
Total 184141, written 184141 (delta 138297), reused 178833 (delta 134081)
real 0m59.549s user 0m56.670s sys 0m2.400s
$ time git-pack-objects --stdout --no-reuse-delta >/dev/null <RL
Generating pack...
Done counting 184141 objects.
Packing 184141 objects.....................
Total 184141, written 184141 (delta 134833), reused 47904 (delta 0)
real 11m13.830s user 9m45.240s sys 0m44.330s
There is one remaining issue when --no-reuse-delta option is not
used. It can create delta chains that are deeper than specified.
A<--B<--C<--D E F G
Suppose we have a delta chain A to D (A is stored in full either
in a pack or as a loose object. B is depth1 delta relative to A,
C is depth2 delta relative to B...) with loose objects E, F, G.
And we are going to pack all of them.
B, C and D are left as delta against A, B and C respectively.
So A, E, F, and G are examined for deltification, and let's say
we decided to keep E expanded, and store the rest as deltas like
this:
E<--F<--G<--A
Oops. We ended up making D a bit too deep, didn't we? B, C and
D form a chain on top of A!
This is because we did not know what the final depth of A would
be, when we checked objects and decided to keep the existing
delta. Unfortunately, deferring the decision until just before
the deltification is not an option. To be able to make B, C,
and D candidates for deltification with the rest, we need to
know the type and final unexpanded size of them, but the major
part of the optimization comes from the fact that we do not read
the delta data to do so -- getting the final size is quite an
expensive operation.
To prevent this from happening, we should keep A from being
deltified. But how would we tell that, cheaply?
To do this most precisely, after check_object() runs, each
object that is used as the base object of some existing delta
needs to be marked with the maximum depth of the objects we
decided to keep deltified (in this case, D is depth 3 relative
to A, so if no other delta chain that is longer than 3 based on
A exists, mark A with 3). Then when attempting to deltify A, we
would take that number into account to see if the final delta
chain that leads to D becomes too deep.
However, this is a bit cumbersome to compute, so we would cheat
and reduce the maximum depth for A arbitrarily to depth/4 in
this implementation.
When generating a new pack, notice if we have already needed
objects in existing packs. If an object is stored deltified,
and its base object is also what we are going to pack, then
reuse the existing deltified representation unconditionally,
bypassing all the expensive find_deltas() and try_deltas()
calls.
Also, notice if what we are going to write out exactly match
what is already in an existing pack (either deltified or just
compressed). In such a case, we can just copy it instead of
going through the usual uncompressing & recompressing cycle.
Without this patch, in linux-2.6 repository with about 1500
loose objects and a single mega pack:
The real problem triggered an earlier fix was that an alternate
entry was pointing at a removed directory. Complaining on
object/pack directory that cannot be opendir-ed produces noise
in an ancient repository that does not have object/pack
directory and has never been packed.
Detect the real user error and report it. Also if opendir
failed for other reasons (e.g. no read permissions), report that
as well.
Spotted by Andrew Vasquez <andrew.vasquez@qlogic.com>.
Introducing git-cvsserver -- a CVS emulator for git.
git-cvsserver is highly functional. However, not all methods are implemented,
and for those methods that are implemented, not all switches are implemented.
All the common read operations are implemented, and add/remove/commit are
supported.
Testing has been done using both the CLI CVS client, and the Eclipse CVS
plugin. Most functionality works fine with both of these clients.
Currently git-cvsserver only works over SSH connections, see the
Documentation for more details on how to configure your client. It
does not support pserver for anonymous access but it should not be
hard to implement. Anonymous access will need tighter input validation.
In our very informal tests, it seems to be significantly faster than a real
CVS server.
This utility depends on a version of git-cvsannotate that supports -S and on
DBD::SQLite.
Licensed under GPLv2. Copyright The Open University UK.
Authors: Martyn Smith <martyn@catalyst.net.nz>
Martin Langhoff <martin@catalyst.net.nz>
Signed-off-by: Martin Langhoff <martin@catalyst.net.nz> Signed-off-by: Junio C Hamano <junkio@cox.net>
Since Ryan's git-annotate is much faster, and has support for renames,
it is likely it goes into the mainstream git soon. Adapt it a little to
work with gitcvs, and actually use it.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: Junio C Hamano <junkio@cox.net>
send-pack: do not give up when remote has insanely large number of refs.
Stephen C. Tweedie noticed that we give up running rev-list when
we see too many refs on the remote side. Limit the number of
negative references we give to rev-list and continue.
Not sending any negative references to rev-list is very bad --
we may be pushing a ref that is new to the other end.
* fix:
git-push: Update documentation to describe the no-refspec behavior.
format-patch: pretty-print timestamp correctly.
git-add: Add support for --, documentation, and test.
* jc/perl:
cvsimport: avoid open "-|" list form for Perl 5.6
svnimport: avoid open "-|" list form for Perl 5.6
send-email: avoid open "-|" list form for Perl 5.6
rerere: avoid open "-|" list form for Perl 5.6
fmt-merge-msg: avoid open "-|" list form for Perl 5.6
* jc/pack-reuse:
pack-objects: avoid delta chains that are too long.
git-repack: allow passing a couple of flags to pack-objects.
pack-objects: finishing touches.
pack-objects: reuse data from existing packs.
* jc/nostat:
cache_name_compare() compares name and stage, nothing else.
"assume unchanged" git: documentation.
ls-files: split "show-valid-bit" into a different option.
"Assume unchanged" git: --really-refresh fix.
ls-files: debugging aid for CE_VALID changes.
"Assume unchanged" git: do not set CE_VALID with --refresh
"Assume unchanged" git
git-push: Update documentation to describe the no-refspec behavior.
It turns out that the git-push documentation didn't describe what it
would do when not given a refspec, (not on the command line, nor in a
remotes file). This is fairly important for the user who is trying to
understand operations such as:
I tracked the mystery behavior down to git-send-pack and lifted the
relevant portion of its documentation up to git-push, (namely that all
refs existing both locally and remotely are updated).
Signed-off-by: Carl Worth <cworth@cworth.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
gitview: Use monospace font to draw the branch and tag name
This patch address the below:
Use monospace font to draw branch and tag name
set the font size to 13.
Make the graph column resizable. This helps to accommodate large tag names
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@gmail.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
gitview: Read tag and branch information using git ls-remote
This fix the below bug
Junio C Hamano <junkio@cox.net> writes:
>
> It does not work in my repository, since you do not seem to
> handle branch and tag names with slashes in them. All of my
> topic branches live in directories with two-letter names
> (e.g. ak/gitview).
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@gmail.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
git-rebase: Clarify usage statement and copy it into the actual documentation.
I found a paper thin man page for git-rebase, but was quite happy to
see something much more useful in the usage statement of the script
when I went there to find out how this thing worked. Here it is
cleaned up slightly and expanded a bit into the actual documentation.
Signed-off-by: Carl Worth <cworth@cworth.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
git-add: Add support for --, documentation, and test.
This adds support to git-add to allow the common -- to separate
command-line options and file names. It adds documentation and a new
git-add test case as well.
[jc: this should apply to 1.2.X maintenance series, so I reworked
git-ls-files --error-unmatch test. ]
Makefile tweaks: Solaris 9+ dont need iconv / move up uname variables
- Solaris 9 and up do not need -liconv, so NEEDS_LIBICONV should be set
only for S8.
- Move the declaration of the uname variables to early in the Makefile
so they can be referenced by prefix and gitexecdir variables.
- gitexecdir defaults to being same as bindir, it might as well reference
that variable.
[jc: corrupt patch, sneakily tried to remove inclusion of GIT-VERSION-FILE
I do not know why I am applying this...]
Signed-off-by: Paul Jakma <paul@quagga.net> Signed-off-by: Junio C Hamano <junkio@cox.net>
This reads data in the format a (non recursive) ls-tree outputs
and writes a tree object to the object database. The created
tree object name is output to the standard output.
For convenience, the input data does not need to be sorted; the
command sorts the input lines internally.
* jc/ident:
Keep Porcelainish from failing by broken ident after making changes.
Delay "empty ident" errors until they really matter.
Make "empty ident" error message a bit more helpful.
It said "after fixing up, commit the result using -F .msg", but
it was not clear for new people how "fix up" should be done.
Hint "git-update-index <path>".
We could recommend "git commit -a -F .msg" instead, but I am
hesitant to give that suggestion in the blind -- you could do a
cherry-pick, revert or a merge in general in a dirty working
tree as long as local modifications do not overlap with the
merge, but using "commit -a" would include them in the result.
git-svn: fix several corner-case and rare bugs with 'commit'
None of these were really show-stoppers (or even triggered)
on most of the trees I've tracked.
* Node change prevention for identically named nodes. This is
a limitation of SVN, but we find the error and exit before
it's passed to SVN so we don't dirty our working tree when our
commit fails. git-svn will exit with an error code 1 if any
of the following conditions are found:
1. a directory is removed and a file of the same name of the
removed directory is created
1a. a file has its parent directory removed and the file is
takes the name of the removed parent directory::
baz/zzz => baz
2. a file is removed and a directory of the same name of the
removed file is created.
2a. a file is moved into a deeper directory that shares the
previous name of the file::
dir/$file => dir/file/$file
Since SVN cannot handle these cases, the user will have to
manually split the commit into several parts.
* --rmdir now handles nested/deep removals. If dir/a/b/c/d/e/file
is removed, and everything else is in the dir/ hierarchy is
otherwise empty, then dir/ will be deleted when file is deleted
from svn and --rmdir specified.
* Always assert that we have written the tree we want to write
on commits. This helped me find several bugs in the symlink
handling code (which as been fixed).
* Several symlink handling fixes. We now refuse to set
permissions on symlinks. We also always unlink a file
if we're going to overwrite it.
* Apply changes in a pre-determined order, so we always have
rename from locations handy before we delete them.
Signed-off-by: Eric Wong <normalperson@yhbt.net> Signed-off-by: Junio C Hamano <junkio@cox.net>
git-svn: remove any need for the XML::Simple dependency
XML::Simple was originally required back when I made svn-arch-mirror
because I needed to explictly track renames with Arch. Then I carried
it over to git-svn because I was afraid somebody could commit an svn
log message that could throw off a non-XML log parser. Then I noticed
the <n> lines column in the header. So, no more XML :)
Signed-off-by: Eric Wong <normalperson@yhbt.net> Signed-off-by: Junio C Hamano <junkio@cox.net>
Maybe we would want to make this default before it graduates to
the master branch, but in the meantime to help testing things,
this allows you to say "git push --thin destination".
The new flag loosens the usual "self containedness" requirment
of packfiles, and sends deltified representation of objects when
we know the other side has the base objects needed to unpack
them. This would help reducing the transfer size.
Thin pack - create packfile with missing delta base.
This goes together with "rev-list --object-edge" change, to feed
pack-objects list of edge commits in addition to the usual
object list. Upon seeing such list, pack-objects loosens the
usual "self contained delta" constraints, and can produce delta
against blobs and trees contained in the edge commits without
storing the delta base objects themselves.
The resulting packfile is not usable in .git/object/packs, but
is a good way to implement "delta-only" transfer.
This new flag is similar to --objects, but causes rev-list to
show list of "uninteresting" commits that appear on the edge
commit prefixed with '-'.
Downstream pack-objects will be changed to take these as hints
to use the trees and blobs contained with them as base objects
of resulting pack, producing an incomplete (not self-contained)
pack.
Such a pack cannot be used in .git/objects/pack (it is prevented
by git-index-pack erroring out if it is fed to git-fetch-pack -k
or git-clone-pack), but would be useful when transferring only
small changes to huge blobs.