howto/maintain-git.txt: new version numbering scheme
We wanted to call the upcoming release "Git 1.9", with its
maintenance track being "Git 1.9.1", "Git 1.9.2", etc., but various
third-party tools are reported to assume that there are at least
three dewey-decimal components in our version number.
Adjust the plan so that vX.Y.0 are feature releases while vX.Y.Z
(Z > 0) are maintenance releases.
Merge branch 'jh/rlimit-nofile-fallback' into maint
When we figure out how many file descriptors to allocate for
keeping packfiles open, a system with non-working getrlimit() could
cause us to die(), but because we make this call only to get a
rough estimate of how many is available and we do not even attempt
to use up all file descriptors available ourselves, it is nicer to
fall back to a reasonable low value rather than dying.
* jh/rlimit-nofile-fallback:
get_max_fd_limit(): fall back to OPEN_MAX upon getrlimit/sysconf failure
Merge branch 'jl/commit-v-strip-marker' into maint
"git commit -v" appends the patch to the log message before
editing, and then removes the patch when the editor returned
control. However, the patch was not stripped correctly when the
first modified path was a submodule.
* jl/commit-v-strip-marker:
commit -v: strip diffs and submodule shortlogs from the commit message
SSL-related options were not passed correctly to underlying socket
layer in "git send-email".
* tr/send-email-ssl:
send-email: set SSL options through IO::Socket::SSL::set_client_defaults
send-email: --smtp-ssl-cert-path takes an argument
send-email: pass Debug to Net::SMTP::SSL::new
Merge branch 'tb/clone-ssh-with-colon-for-port' into maint
Remote repository URL expressed in scp-style host:path notation are
parsed more carefully (e.g. "foo/bar:baz" is local, "[::1]:/~user" asks
to connect to user's home directory on host at address ::1.
* tb/clone-ssh-with-colon-for-port:
git_connect(): use common return point
connect.c: refactor url parsing
git_connect(): refactor the port handling for ssh
git fetch: support host:/~repo
t5500: add test cases for diag-url
git fetch-pack: add --diag-url
git_connect: factor out discovery of the protocol and its parts
git_connect: remove artificial limit of a remote command
t5601: add tests for ssh
t5601: remove clear_ssh, refactor setup_ssh_wrapper
repack.c: rename and unlink pack file if it exists
When a repo was fully repacked, and is repacked again, we may run
into the situation that "new" packfiles have the same name as
already existing ones (traditionally packfiles have been named after
the list of names of objects in them, so repacking all the objects
in a single pack would have produced a packfile with the same name).
The logic is to rename the existing ones into filename like
"old-XXX", create the new ones and then remove the "old-" ones.
When something went wrong in the middle, this sequence is rolled
back by renaming the "old-" files back.
The renaming into "old-" did not work as intended, because
file_exists() was done on "XXX", not "pack-XXX". Also when rolling
back the change, the code tried to rename "old-pack-XXX" but the
saved ones are named "old-XXX", so this couldn't have worked.
Signed-off-by: Torsten Bögershausen <tboegi@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
This goes far back to e84fb2f (branch --contains: default to HEAD -
2008-07-08) where the same parsing code is shared with
builtin/tag.c. git-branch.txt correctly states that <commit> for
--contains is optional while git-tag.txt does not. Correct it.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Otherwise there is a race: if 'git log' finishes writing before the
pager terminates and closes the pipe, all is well, and if the pager
finishes quickly enough then 'git log' terminates with SIGPIPE.
died of signal 13 at /build/buildd/git-1.9~rc1/t/test-terminal.perl line 33.
not ok 6 - LESS and LV envvars are set for pagination
Noticed on Ubuntu PPA builders, where the race was lost about half the
time. Compare v1.7.0.2~6^2 (tests: Fix race condition in t7006-pager,
2010-02-22).
Reported-by: Anders Kaseorg <andersk@MIT.EDU> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ta/doc-http-protocol-in-html:
http-protocol.txt: don't use uppercase for variable names in "The Negotiation Algorithm"
Documentation: make it easier to maintain enumerated documents
create HTML for http-protocol.txt
Code clean-up and protection against concurrent write access to the
ref namespace.
* mh/safe-create-leading-directories:
rename_tmp_log(): on SCLD_VANISHED, retry
rename_tmp_log(): limit the number of remote_empty_directories() attempts
rename_tmp_log(): handle a possible mkdir/rmdir race
rename_ref(): extract function rename_tmp_log()
remove_dir_recurse(): handle disappearing files and directories
remove_dir_recurse(): tighten condition for removing unreadable dir
lock_ref_sha1_basic(): if locking fails with ENOENT, retry
lock_ref_sha1_basic(): on SCLD_VANISHED, retry
safe_create_leading_directories(): add new error value SCLD_VANISHED
cmd_init_db(): when creating directories, handle errors conservatively
safe_create_leading_directories(): introduce enum for return values
safe_create_leading_directories(): always restore slash at end of loop
safe_create_leading_directories(): split on first of multiple slashes
safe_create_leading_directories(): rename local variable
safe_create_leading_directories(): add explicit "slash" pointer
safe_create_leading_directories(): reduce scope of local variable
safe_create_leading_directories(): fix format of "if" chaining
* jk/diff-filespec-cleanup:
diff_filespec: use only 2 bits for is_binary flag
diff_filespec: reorder is_binary field
diff_filespec: drop xfrm_flags field
diff_filespec: drop funcname_pattern_ident field
diff_filespec: reorder dirty_submodule macro definitions
The "if /etc/ssl/certs/ directory exists, explicitly telling the
library to use it as SSL_ca_path" blind-defaulting in "git
send-email" broke platforms where /etc/ssl/certs/ directory exists,
but it cannot used as SSL_ca_path (e.g. Fedora rawhide). Fix it by
not specifying any SSL_ca_path/SSL_ca_file but still asking for peer
verification in such a case.
* rk/send-email-ssl-cert:
send-email: /etc/ssl/certs/ directory may not be usable as ca_path
Explicitly list $HOME/.config/git/ignore as one of the places you
can use to keep ignore patterns that depend on your personal choice
of tools, e.g. *~ for Emacs users.
* jn/ignore-doc:
gitignore doc: add global gitignore to synopsis
Fix a handful of bugs around interpreting $branch@{upstream}
notation and its lookalike, when $branch part has interesting
characters, e.g. "@", and ":".
* jk/interpret-branch-name-fix:
interpret_branch_name: find all possible @-marks
interpret_branch_name: avoid @{upstream} past colon
interpret_branch_name: always respect "namelen" parameter
interpret_branch_name: rename "cp" variable to "at"
interpret_branch_name: factor out upstream handling
"git clone" would fail to clone from a repository that has a ref
directly under "refs/", e.g. "refs/stash", because different
validation paths do different things on such a refname. Loosen the
client side's validation to allow such a ref.
* jk/allow-fetch-onelevel-refname:
fetch-pack: do not filter out one-level refs
"git log --left-right A...B" lost the "leftness" of commits
reachable from A when A is a tag as a side effect of a recent
bugfix. This is a regression in 1.8.4.x series.
* jc/revision-range-unpeel:
revision: propagate flag bits from tags to pointees
revision: mark contents of an uninteresting tree uninteresting
Documentation: make it easier to maintain enumerated documents
Instead of starting an enumeration of documents with a DOC = doc1
followed by DOC += doc2, DOC += doc3, ..., empty it with "DOC =" at
the beginning and consistently add them with "DOC += ...".
./Documentation/technical/http-protocol.txt was missing from TECH_DOCS in Makefile.
Add it and also improve HTML formatting while still retaining good readability of the ASCII text:
- Use monospace font instead of italicized or roman font for machine output and source text
- Use roman font for things which should be body text
- Use double quotes consistently for "want" and "have" commands
- Use uppercase "C" / "S" consistently for "client" / "server";
also use "C:" / "S:" instead of "(C)" / "(S)" for consistency and
to avoid having formatted "(C)" as copyright symbol in HTML
- Use only spaces and not a combination of tabs and spaces for whitespace
Signed-off-by: Thomas Ackermann <th.acker@arcor.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
tree_entry_interesting: match against all pathspecs
The current basedir compare aborts early in order to avoid futile
recursive searches. However, a match may still be found by another
pathspec. This can cause an error while checking out files from a branch
when using multiple pathspecs:
$ git checkout master -- 'a/*.txt' 'b/*.txt'
error: pathspec 'a/*.txt' did not match any file(s) known to git.
Signed-off-by: Andy Spencer <andy753421@gmail.com> Acked-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Makefile: remove redundant object in git-http{fetch,push}
revision.o is included in libgit.a which is in $(GITLIBS), so we don't
need to include is separately. This fixes compilation with
"-fwhole-program" which otherwise fails with messages like this:
libgit.a(revision.o): In function `mark_tree_uninteresting':
/home/john/src/git/revision.c:108: multiple definition of `mark_tree_uninteresting'
/tmp/ccKQRkZV.ltrans2.ltrans.o:/home/john/src/git/revision.c:108: first defined here
Signed-off-by: John Keeping <john@keeping.me.uk> Signed-off-by: Junio C Hamano <gitster@pobox.com>
doc: remote author/documentation sections from more pages
We decided at 48bb914e (doc: drop author/documentation sections from
most pages, 2011-03-11) to remove "author" and "documentation"
sections from our documentation. Remove a few stragglers.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Reviewed-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
l10n: remove 2 blank translations on Danish, Dutch
Two l10n teams haven't contributed a single translation for about two
years since they was initialized with a blank template. Remove them
can make the Git package smaller and give opportunities to other
contributors.
Some versions of touch (such as /usr/ucb/touch on Solaris)
do not know about the "-r" option. This would make sense as
a feature of test-chmtime, but fortunately this fix is even
easier.
The test does not care about the timestamp of the .keep file it
creates at all, only that it exists. For such a use case, with or
without portability issues around "-r", "touch" should not be used
in the first place.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t7501.9 tries to check that "git commit" will fail when the
index is unchanged. It relies on previous tests not to have
modified the index. When it was originally written, this was
always the case. However, commit c65dc35 (t7501: test the
right kind of breakage, 2012-03-30) changed earlier tests (4
and 5) to leave a modification in the index.
We never noticed, however, because t7501.7, between the two,
clears the index state as a side effect. However, that test
depends on the PERL prerequisite, and so it does not always
run. Therefore if NO_PERL is set, we do not run the
intervening test, the index is left unclean, and t7501.9
fails.
We could fix this by moving t7501.9 up in the script.
However, this patch instead leaves it in place and adds a
"git reset" before the commit. This makes the test more
explicit about its preconditions, and will future-proof it
against any other changes in the test state.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
tree-walk.c: ignore trailing slash on submodule in tree_entry_interesting()
We do ignore trailing slash on a directory, so pathspec "abc/" matches
directory "abc". A submodule is also a directory. Apply the same logic
to it. This makes "git log submodule-path" and "git log submodule-path/"
produce the same output.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the original shell version of git-repack, any options
destined for pack-objects were left as strings, and passed
as a whole. Since the C rewrite in commit a1bbc6c (repack:
rewrite the shell script in C, 2013-09-15), we now parse
these values to integers internally, then reformat the
integers when passing the option to pack-objects.
This has the advantage that we catch format errors earlier
(i.e., when repack is invoked, rather than when pack-objects
is invoked).
It has three disadvantages, though:
1. Our internal data types may not be the right size. In
the case of "--window-memory" and "--max-pack-size",
these are "unsigned long" in pack-objects, but we can
only represent a regular "int".
2. Our parsing routines might not be the same as those of
pack-objects. For the two options above, pack-objects
understands "100m" to mean "100 megabytes", but repack
does not.
3. We have to keep a sentinel value to know whether it is
worth passing the option along. In the case of
"--window-memory", we currently do not pass it if the
value is "0". But that is a meaningful value to
pack-objects, where it overrides any configured value.
We can fix all of these by simply passing the strings from
the user along to pack-objects verbatim. This does not
actually fix anything for "--depth" or "--window", but these
are converted, too, for consistency.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we use OPT_STRING to parse an option, we get back a
pointer into the argv array, which should be "const char *".
The compiler doesn't notice because it gets passed through a
"void *" in the option struct.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The values passed via -DMAJOR=, -DMINOR=, and -DPATCH= are used in
FILEVERSION and PRODUCTVERSION statements, which expect up to four numeric
values. These version numbers are intended for machine consumption. They
are typically inspected by installers to decide whether a file to be
installed is newer than one that exists on the system, but are not used
for much else.
We can be pretty certain that there are no tools that look at these
version numbers, not even the installer of Git for Windows does.
Therefore, to fix the syntax error, fill in only the first two numbers,
which we are guaranteed to find in Git version numbers.
Signed-off-by: Johannes Sixt <j6t@kdbg.org> Acked-by: Pat Thoyts <patthoyts@users.sourceforge.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* 'master' of git://ozlabs.org/~paulus/gitk:
gitk: Indent word-wrapped lines in commit display header
gitk: Comply with XDG base directory specification
gitk: Replace "next" and "prev" buttons with down and up arrows
gitk: chmod +x po2msg.sh
gitk: Update copyright dates
gitk: Add Bulgarian translation (304t)
gitk: Fix mistype
gitk: Indent word-wrapped lines in commit display header
In the cases where the lines starting with Precedes:, Follows: and
Branches: in the commit display are long enough to be word-wrapped,
this adds a 1cm margin on the left of the wrapped lines, to make
the display more readable. Suggested by Stephen Rothwell.
According to profile data, _rev_list and rebuild consume a large
portion of time. Memoize the results of _rev_list and memoize
rebuild internals to avoid subprocess invocation.
When importing 15152 revisions on a LAN, time improved from 10
hours to 3-4 hours.
Signed-off-by: lin zuojian <manjian2006@gmail.com> Signed-off-by: Eric Wong <normalperson@yhbt.net>
safe_create_leading_directories(): on Windows, \ can separate path components
When cloning to a directory "C:\foo\bar" from Windows' cmd.exe where
"foo" does not exist yet, Git would throw an error like
fatal: could not create work tree dir 'c:\foo\bar'.: No such file or directory
Fix this by not hard-coding a platform specific directory separator
into safe_create_leading_directories().
This patch, including its entire commit message, is derived from a
patch by Sebastian Schuberth.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Sebastian Schuberth <sschuberth@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git p4 test: examine behavior with locked (+l) files
The p4 server can enforce file locking, so that only one user
can edit a file at a time. Git p4 is unable to submit changes
to locked files. Currently it exits poorly. Ideally it would
notice the locked condition and clean up nicely.
Add a bunch of tests that describe the problem, hoping that
fixes appear in the future.
Signed-off-by: Pete Wyckoff <pw@padd.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git p4: fix an error message when "p4 where" fails
When "p4 where" fails, for whatever reason, the error message tries to
show an undefined variable. This minor bug applies only when using a
client spec, and was introduced recently in 9d57c4a (git p4: implement
view spec wildcards with "p4 where", 2013-08-30).
Signed-off-by: Pete Wyckoff <pw@padd.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git p4: handle files with wildcards when doing RCS scrubbing
Commit 9d7d446 (git p4: submit files with wildcards, 2012-04-29)
fixed problems with handling files that had p4 wildcard
characters, like "@" and "*". But it missed one case, that of
RCS keyword scrubbing, which uses "p4 fstat" to extract type
information. Fix it by calling wildcard_encode() on the raw
filename.
Signed-off-by: Pete Wyckoff <pw@padd.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Generating the submit template for p4 uses tempfile.mkstemp(),
which by default puts files in /tmp. For a test that fails,
possibly on purpose, this is not cleaned up. Run with TMPDIR
pointing into the trash directory so the temp files go away
with the test results.
To do this required some other minor changes. First, the editor
is launched using system(editor + " " + template_file), using
shell expansion to build the command string. This doesn't work
if editor has a space in it. And is generally unwise as it's
easy to fool the shell into doing extra work. Exec the args
directly, without shell expansion.
Second, without shell expansion, the trick of "P4EDITOR=:" used
in the tests doesn't work. Use a real command, true, as the
non-interactive editor for testing.
Signed-off-by: Pete Wyckoff <pw@padd.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The tests use author@example.com as the canonical submitter,
but he does not have an entry in the p4 users database.
This causes the generated change description to complain
that the git and p4 users disagree. The complaint message
is still valid, but isn't useful in tests. It was introduced
in 848de9c (git-p4: warn if git authorship won't be retained,
2011-05-13).
Fix t9813 to use @example.com instead of @localhost due to
change in p4_add_user(). Move the function into the git p4
test library so author can be added at initialization time.
Signed-off-by: Pete Wyckoff <pw@padd.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit e9df0f9 (git p4: cygwin p4 client does not mark read-only,
2013-01-26) fixed a problem with "test -w" on cygwin, but mistakenly
marked the new test as failing. Fix this.
Signed-off-by: Pete Wyckoff <pw@padd.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
There was no test where p4 deleted a file with a wildcard
character. Make sure git p4 applies the wildcard decoding
properly when importing a delete that includes a wildcard.
Signed-off-by: Pete Wyckoff <pw@padd.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git p4: work around p4 bug that causes empty symlinks
Damien Gérard highlights an interesting problem. Some p4
repositories end up with symlinks that have an empty target. It
is not possible to create this with current p4, but they do
indeed exist.
The effect in git p4 is that "p4 print" on the symlink returns an
empty string, confusing the curret symlink-handling code.
Such broken repositories cause problems in p4 as well, even with
no git involved. In p4, syncing to a change that includes a
bogus symlink causes errors:
//depot/empty-symlink - updating /home/me/p4/empty-symlink
rename: /home/me/p4/empty-symlink: No such file or directory
and leaves no symlink.
In git, replicate the p4 behavior by ignoring these bad symlinks.
If, in a later p4 revision, the symlink happens to point to
something non-null, the symlink will be replaced properly.
Add a big test for all this too.
This happens to be a regression introduced by 1292df1 (git-p4:
Fix occasional truncation of symlink contents., 2013-08-08) and
appeared first in 1.8.5. But it shows up only in p4 repositories
of dubious character, so can wait for a proper release.
Tested-by: Damien Gérard <damien@iwi.me> Signed-off-by: Pete Wyckoff <pw@padd.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
gitk: Comply with XDG base directory specification
Write the gitk config data to $XDG_CONFIG_HOME/git/gitk ($HOME/.config/git/gitk
by default) in line with the XDG specification. This makes it consistent with
git which also follows the spec.
If $HOME/.gitk already exists use that for backward compatibility, so only new
installations are affected.
Signed-off-by: Astril Hayato <astrilhayato@gmail.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
Since 9d57c4a (git p4: implement view spec wildcards with "p4
where", 2013-08-30), all the wildcard types should be supported.
Change must-fail tests to mark that they now pass.
Signed-off-by: Pete Wyckoff <pw@padd.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
list-objects: only look at cmdline trees with edge_hint
When rev-list is given a command-line like:
git rev-list --objects $commit --not --all
the most accurate answer is the difference between the set
of objects reachable from $commit and the set reachable from
all of the existing refs. However, we have not historically
provided that answer, because it is very expensive to
calculate. We would have to open every tree of every commit
in the entire history.
Instead, we find the accurate set difference of the
reachable commits, and then mark the trees at the boundaries
as uninteresting. This misses objects which appear in the
trees of both the interesting commits and deep within the
uninteresting history.
Commit fbd4a70 (list-objects: mark more commits as edges in
mark_edges_uninteresting, 2013-08-16) noticed that we miss
those objects during pack-objects, and added code to examine
the trees of all of the "--not" refs given on the
command-line. Note that this is still not the complete set
difference, because we look only at the tips of the
command-line arguments, not all of their reachable commits.
But it increases the set of boundary objects we consider,
which is especially important for shallow fetches. So we
are trading extra CPU time for a larger set of boundary
objects, which can improve the resulting pack size for a
--thin pack.
This tradeoff probably makes sense in the context of
pack-objects, where we have set revs->edge_hint to have the
traversal feed us the set of boundary objects. For a
regular rev-list, though, it is probably not a good
tradeoff. It is true that it makes our list slightly closer
to a true set difference, but it is a rare case where this
is important. And because we do not have revs->edge_hint
set, we do nothing useful with the larger set of boundary
objects.
This patch therefore ties the extra tree examination to the
revs->edge_hint flag; it is the presence of that flag that
makes the tradeoff worthwhile.
Here is output from the p0001-rev-list showing the
improvement in performance:
We time a straight "rev-list --all" and its "--object"
counterpart, both going all the way to the root. However, we
do not time a partial history walk. This patch adds an
extreme case: a walk over a very small slice of history, but
with a very large set of UNINTERESTING tips. This is similar
to the connectivity check run by git on a small fetch, or
the walk done by any pre-receive hooks that want to check
incoming commits.
This test reveals a performance regression in git v1.8.4.2,
caused by fbd4a70 (list-objects: mark more commits as edges
in mark_edges_uninteresting, 2013-08-16):
The @{-N} syntax always referred to the N-th last thing checked out,
which can be either a branch or a commit (for detached HEAD cases).
However, the documentation only mentioned branches.
Edit in a "/commit" in the appropriate places.
Reported-by: Kevin <ikke@ikke.info> Signed-off-by: Thomas Rast <tr@thomasrast.ch> Signed-off-by: Junio C Hamano <gitster@pobox.com>
rename_tmp_log(): limit the number of remote_empty_directories() attempts
This doesn't seem to be a likely error, but we've got the counter
anyway, so we might as well use it for an added bit of safety.
Please note that the first call to rename() is optimistic, and it is
normal for it to fail if there is a directory in the way. So bump the
total number of allowed attempts to 4, to be sure that we can still
have at least 3 retries in the case of a race.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
rename_tmp_log(): handle a possible mkdir/rmdir race
If a directory vanishes while renaming the temporary reflog file,
retry (up to 3 times). This could happen if another process deletes
the directory created by safe_create_leading_directories() just before
we rename the file into the directory.
As far as I can tell, this race could not occur internal to git. The
only time that a directory under $GIT_DIR/logs is deleted is if room
has to be made for a log file for a reference with the same name;
for example, in the following sequence:
lock_ref_sha1_basic(): if locking fails with ENOENT, retry
If hold_lock_file_for_update() fails with errno==ENOENT, it might be
because somebody else (for example, a pack-refs process) has just
deleted one of the lockfile's ancestor directories. So if this
condition is detected, try again (up to 3 times).
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
If safe_create_leading_directories() fails because a file along the
path unexpectedly vanished, try again (up to 3 times).
This can occur if another process is deleting directories at the same
time as we are trying to make them. For example, "git pack-refs
--all" tries to delete the loose refs and any empty directories that
are left behind. If a pack-refs process is running, then it might
delete a directory that we need to put a new loose reference in.
If safe_create_leading_directories() thinks this might have happened,
then take its advice and try again (maximum three attempts).
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The -L option is the same as for git-log, so the entire block is just
copied from git-log.txt. However, until the parser is fixed we add a
caveat that gitk only understands the stuck form.
Signed-off-by: Thomas Rast <tr@thomasrast.ch> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* tag 'gitgui-0.19.0' of http://repo.or.cz/r/git-gui:
git-gui 0.19
git-gui: chmod +x po2msg, windows/git-gui.sh
git-gui: fallback right pane to packed widgets with Tk 8.4
git-gui i18n: Added Bulgarian translation
git-gui l10n: Add 29 more terms to glossary
git-gui i18n: Initial glossary in Bulgarian
gitk: Replace "next" and "prev" buttons with down and up arrows
Users often find that "next" and "prev" do the opposite of what they
expect. For example, "next" moves to the next match down the list, but
that is almost always backwards in time. Replacing the text with arrows
makes it clear where the buttons will take the user.
Signed-off-by: Marc Branchaud <marcnarc@xiplink.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
The Makefile only runs it using tclsh, but because the fallback po2msg
script has the usual tcl preamble starting with #!/bin/sh it can also
be run directly.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Paul Mackerras <paulus@samba.org>