parse-options: Allow abbreviated options when unambiguous
When there is an option "--amend", the option parser now recognizes
"--am" for that option, provided that there is no other option beginning
with "--am".
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
parse-options: make some arguments optional, add callbacks.
* add the possibility to use callbacks to parse some options, this can
help implementing new options kinds with great flexibility. struct option
gains a callback pointer and a `defval' where callbacks user can put
either integers or pointers. callbacks also can use the `value' pointer
for anything, preferably to the pointer to the final storage for the value
though.
* add a `flag' member to struct option to make explicit that this option may
have an optional argument. The semantics depends on the option type. For
INTEGERS, it means that if the switch is not used in its
--long-form=<value> form, and that there is no token after it or that the
token does not starts with a digit, then it's assumed that the switch has
no argument. For STRING or CALLBACK it works the same, except that the
condition is that the next atom starts with a dash. This is needed to
implement backward compatible behaviour with existing ways to parse the
command line. Its use for new options is discouraged.
Signed-off-by: Pierre Habouzit <madcoder@debian.org> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
The option parser takes argc, argv, an array of struct option
and a usage string. Each of the struct option elements in the array
describes a valid option, its type and a pointer to the location where the
value is written. The entry point is parse_options(), which scans through
the given argv, and matches each option there against the list of valid
options. During the scan, argv is rewritten to only contain the
non-option command line arguments and the number of these is returned.
Aggregation of single switches is allowed:
-rC0 is the same as -r -C 0 (supposing that -C wants an arg).
Every long option automatically support the option with the same name,
prefixed with 'no-' to unset the switch. It assumes that initial value for
strings are "NULL" and for integers is "0".
Long options are supported either with '=' or without:
--some-option=foo is the same as --some-option foo
Acked-by: Kristian Høgsberg <krh@redhat.com> Signed-off-by: Pierre Habouzit <madcoder@debian.org> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Correct handling of upload-pack in builtin-fetch-pack
The field in the args was being ignored in favor of a static constant
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org> Thanked-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Try to avoid a lot of work scanning for excluded files,
by caching some more information when setting up the exclusion
data structure.
Speeds up 'git runstatus' on a repository containing the Qt sources by 30% and
reduces the amount of instructions executed (as measured by valgrind) by a
factor of 2.
* maint:
RelNotes-1.5.3.5: describe recent fixes
merge-recursive.c: mrtree in merge() is not used before set
sha1_file.c: avoid gcc signed overflow warnings
Fix a small memory leak in builtin-add
honor the http.sslVerify option in shell scripts
merge-recursive.c: mrtree in merge() is not used before set
The called function merge_trees() sets its *result, to which the
address of the variable mrtree in merge() function is passed,
only when index_only is set. But that is Ok as the function
uses the value in the variable only under index_only iteration.
However, recent gcc does not realize this. Work it around by
adding a fake initializer.
sha1_file.c: In check_packed_git_:
sha1_file.c:527: warning: assuming signed overflow does not
occur when assuming that (X + c) < X is always false
sha1_file.c:527: warning: assuming signed overflow does not
occur when assuming that (X + c) < X is always false
for a piece of code that tries to make sure that off_t is large
enough to hold more than 2^32 offset. The test tried to make
sure these do not wrap-around:
/* make sure we can deal with large pack offsets */
off_t x = 0x7fffffffUL, y = 0xffffffffUL;
if (x > (x + 1) || y > (y + 1)) {
but gcc assumes it can do whatever optimization it wants for a
signed overflow (undefined behaviour) and warns about this
construct.
Follow Linus's suggestion to check sizeof(off_t) instead to work
around the problem.
No longer talk about Cogito since it's deprecated. Some scripts (such as
git-reset or git-branch) have undergone builtinification so adjust the text
to reflect this.
Fix a typo in the description of git-show-branch (merges are indicated by a
`-', not by a `.').
git-pull/git-push do not seem to use the dumb git-ssh-fetch/git-ssh-upload
(the text was probably missing a word).
Adjust a link that wasn't rendered properly because it was wrapped.
Signed-off-by: Benoit Sigoure <tsuna@lrde.epita.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-fetch: do not fail when remote branch disappears
When the branch named with branch.$name.merge is not covered by
the fetch configuration for the remote repository named with
branch.$name.remote, we automatically add that branch to the set
of branches to be fetched. However, if the remote repository
does not have that branch (e.g. it used to exist, but got
removed), this is not a reason to fail the git-fetch itself.
The situation however will be noticed if git-fetch was called by
git-pull, as the resulting FETCH_HEAD would not have any entry
that is marked for merging.
Acked-By: Daniel Barkalow <barkalow@iabervon.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* 'master' of git://git.kernel.org/pub/scm/gitk/gitk: (34 commits)
gitk: Use the UI font for the diff/old version/new version radio buttons
gitk: Simplify the code for finding commits
gitk: Fix a couple more bugs in the path limiting
gitk: Fix some bugs with path limiting in the diff display
gitk: Use the status window for other functions
gitk: Integrate the reset progress bar in the main frame
gitk: Ensure tabstop setting gets restored by Cancel button
gitk: Limit diff display to listed paths by default
gitk: Fix Tcl error: can't unset findcurline
gitk: Get rid of the diffopts variable
gitk: Fix bug where the last few commits would sometimes not be visible
gitk: Add a font chooser
gitk: Keep track of font attributes ourselves instead of using font actual
gitk: Use named fonts instead of the font specification
gitk: Fix bug causing Tcl error when changing find match type
gitk: Fix the tab setting in the diff display window
gitk: Add progress bars for reading in stuff and for finding
gitk: Fix a couple of bugs
gitk: Simplify highlighting interface and combine with Find function
gitk: Fix bug in generating patches
...
gitk: Use the UI font for the diff/old version/new version radio buttons
This makes the radio buttons for selecting whether to see the full diff,
the old version or the new version use the same font as the other user
interface elements.
This unifies findmore and findmorerev, and adds the ability to do
a search with or without wrap around from the end of the list of
commits to the beginning (or vice versa for reverse searches).
findnext and findprev are gone, and the buttons and keys for searching
all call dofind now. dofind doesn't unmark the matches to start with.
Shift-up and shift-down are back by popular request, and the searches
they do don't wrap around. The other keys that do searches (/, ?,
return, M-f) do wrapping searches except for M-g.
The code generating perl/Makefile from Makefile.PL was causing trouble
because it didn't considered NO_PERL_MAKEMAKER and ran makemaker
unconditionally, rewriting perl.mak. Makemaker is FUBAR in ActiveState Perl,
and perl/Makefile has a replacement for it.
Besides, a changed Git.pm is *NOT* a reason to rebuild all the perl scripts,
so remove the dependency too.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* db/fetch-pack: (60 commits)
Define compat version of mkdtemp for systems lacking it
Avoid scary errors about tagged trees/blobs during git-fetch
fetch: if not fetching from default remote, ignore default merge
Support 'push --dry-run' for http transport
Support 'push --dry-run' for rsync transport
Fix 'push --all branch...' error handling
Fix compilation when NO_CURL is defined
Added a test for fetching remote tags when there is not tags.
Fix a crash in ls-remote when refspec expands into nothing
Remove duplicate ref matches in fetch
Restore default verbosity for http fetches.
fetch/push: readd rsync support
Introduce remove_dir_recursively()
bundle transport: fix an alloc_ref() call
Allow abbreviations in the first refspec to be merged
Prevent send-pack from segfaulting when a branch doesn't match
Cleanup unnecessary break in remote.c
Cleanup style nit of 'x == NULL' in remote.c
Fix memory leaks when disconnecting transport instances
Ensure builtin-fetch honors {fetch,transfer}.unpackLimit
...
git-remote: fix "Use of uninitialized value in string ne"
martin f krafft <madduck@madduck.net> writes:
> piper:~> git remote show origin
> * remote origin
> URL: ssh://git.madduck.net/~/git/etc/mailplate.git
> Use of uninitialized value in string ne at /usr/local/stow/git/bin/git-remote line 248.
This is because there might not be branch.<name>.remote defined but
the code unconditionally dereferences $branch->{$name}{'REMOTE'} and
compares with another string.
Tested-by: Martin F Krafft <madduck@madduck.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
First, paths ending in a slash were not matching anything. This fixes
path_filter to handle paths ending in a slash (such entries have to
match a directory, and can't match a file, e.g., foo/bar/ can't match
a plain file called foo/bar).
Secondly, clicking in the file list pane (bottom right) was broken
because $treediffs($ids) contained all the files modified by the
commit, not just those within the file list. This fixes that too.
gitk: Fix some bugs with path limiting in the diff display
First, we weren't putting "--" between the ids and the paths in the
git diff-tree/diff-index/diff-files command, so if there was a tag
and a file with the same name, we could get an ambiguity in the
command. This puts the "--" in to make it clear that the paths are
paths.
Secondly, this implements the path limiting for merge diffs as well
as the normal 2-way diffs.
gitk: Integrate the reset progress bar in the main frame
This makes the reset function use a progress bar in the same location
as the progress bars for reading in commits and for finding commits,
instead of a progress bar in a separate detached window. The progress
bar for resetting is red.
This also puts "Resetting" in the status window while the reset is in
progress. The setting of the status window is done through an
extension of the interface used for setting the watch cursor.
gitk: Ensure tabstop setting gets restored by Cancel button
We weren't restoring the tabstop setting if the user pressed the
Cancel button in the Edit/Preferences window. Also improved the
label for the checkbox (made it "Tab spacing" rather than the laconic
"tabstop") and moved it above the "Display nearby tags" checkbox.
gitk: Limit diff display to listed paths by default
When the user has specified a list of paths, either on the command line
or when creating a view, gitk currently displays the diffs for all files
that a commit has modified, not just the ones that match the path list.
This is different from other git commands such as git log. This change
makes gitk behave the same as these other git commands by default, that
is, gitk only displays the diffs for files that match the path list.
There is now a checkbox labelled "Limit diffs to listed paths" in the
Edit/Preferences pane. If that is unchecked, gitk will display the
diffs for all files as before.
When gitk is run with the --merge flag, it will get the list of unmerged
files at startup, intersect that with the paths listed on the command line
(if any), and use that as the list of paths.
Use PRIuMAX instead of 'unsigned long long' in show-index
Elsewhere in Git we already use PRIuMAX and cast to uintmax_t when
we need to display a value that is 'very big' and we're not exactly
sure what the largest display size is for this platform.
This particular fix is needed so we can do the incredibly crazy
temporary hack of:
allowing us to more easily look for locations where we are passing
a pointer to an 8 byte value to a function that expects a 4 byte
value. This can occur on some platforms where sizeof(long) == 8
and sizeof(size_t) == 4.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
* maint:
Describe more 1.5.3.5 fixes in release notes
Fix diffcore-break total breakage
Fix directory scanner to correctly ignore files without d_type
Improve receive-pack error message about funny ref creation
fast-import: Fix argument order to die in file_change_m
git-gui: Don't display CR within console windows
git-gui: Handle progress bars from newer gits
git-gui: Correctly report failures from git-write-tree
gitk.txt: Fix markup.
send-pack: respect '+' on wildcard refspecs
git-gui: accept versions containing text annotations, like 1.5.3.mingw.1
git-gui: Don't crash when starting gitk from a browser session
git-gui: Allow gitk to be started on Cygwin with native Tcl/Tk
git-gui: Ensure .git/info/exclude is honored in Cygwin workdirs
git-gui: Handle starting on mapped shares under Cygwin
git-gui: Display message box when we cannot find git in $PATH
git-gui: Avoid using bold text in entire gui for some fonts
Ok, so on the kernel list, some people noticed that "git log --follow"
doesn't work too well with some files in the x86 merge, because a lot of
files got renamed in very special ways.
In particular, there was a pattern of doing single commits with renames
that looked basically like
- rename "filename.h" -> "filename_64.h"
- create new "filename.c" that includes "filename_32.h" or
"filename_64.h" depending on whether we're 32-bit or 64-bit.
which was preparatory for smushing the two trees together.
Now, there's two issues here:
- "filename.c" *remained*. Yes, it was a rename, but there was a new file
created with the old name in the same commit. This was important,
because we wanted each commit to compile properly, so that it was
bisectable, so splitting the rename into one commit and the "create
helper file" into another was *not* an option.
So we need to break associations where the contents change too much.
Fine. We have the -B flag for that. When we break things up, then the
rename detection will be able to figure out whether there are better
alternatives.
- "git log --follow" didn't with with -B.
Now, the second case was really simple: we use a different "diffopt"
structure for the rename detection than the basic one (which we use for
showing the diffs). So that second case is trivially fixed by a trivial
one-liner that just copies the break_opt values from the "real" diffopts
to the one used for rename following. So now "git log -B --follow" works
fine:
however, the end result does *not* work. Because our diffcore-break.c
logic is totally bogus!
In particular:
- it used to do
if (base_size < MINIMUM_BREAK_SIZE)
return 0; /* we do not break too small filepair */
which basically says "don't bother to break small files". But that
"base_size" is the *smaller* of the two sizes, which means that if some
large file was rewritten into one that just includes another file, we
would look at the (small) result, and decide that it's smaller than the
break size, so it cannot be worth it to break it up! Even if the other
side was ten times bigger and looked *nothing* like the samell file!
That's clearly bogus. I replaced "base_size" with "max_size", so that
we compare the *bigger* of the filepair with the break size.
- It calculated a "merge_score", which was the score needed to merge it
back together if nothing else wanted it. But even if it was *so*
different that we would never want to merge it back, we wouldn't
consider it a break! That makes no sense. So I added
if (*merge_score_p > break_score)
return 1;
to make it clear that if we wouldn't want to merge it at the end, it
was *definitely* a break.
- It compared the whole "extent of damage", counting all inserts and
deletes, but it based this score on the "base_size", and generated the
damage score with
but that makes no sense either, since quite often, this will result in
a number that is *bigger* than MAX_SCORE! Why? Because base_size is
(again) the smaller of the two files we compare, and when you start out
from a small file and add a lot (or start out from a large file and
remove a lot), the base_size is going to be much smaller than the
damage!
Again, the fix was to replace "base_size" with "max_size", at which
point the damage actually becomes a sane percentage of the whole.
With these changes in place, not only does "git log -B --follow" work for
the case that triggered this in the first place, ie now
actually gives reasonable results. But I also wanted to verify it in
general, by doing a full-history
git log --stat -B -C
on my kernel tree with the old code and the new code.
There's some tweaking to be done, but generally, the new code generates
much better results wrt breaking up files (and then finding better rename
candidates). Here's a few examples of the "--stat" output:
Now, in some other cases, it does actually turn a rename into a real
"delete+create" pair, and then the diff is usually bigger, so truth in
advertizing: it doesn't always generate a nicer diff. But for what -B was
meant for, I think this is a big improvement, and I suspect those cases
where it generates a bigger diff are tweakable.
So I think this diff fixes a real bug, but we might still want to tweak
the default values and perhaps the exact rules for when a break happens.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Fix directory scanner to correctly ignore files without d_type
On Fri, 19 Oct 2007, Todd T. Fries wrote:
> If DT_UNKNOWN exists, then we have to do a stat() of some form to
> find out the right type.
That happened in the case of a pathname that was ignored, and we did
not ask for "dir->show_ignored". That test used to be *together*
with the "DTYPE(de) != DT_DIR", but splitting the two tests up
means that we can do that (common) test before we even bother to
calculate the real dtype.
Of course, that optimization only matters for systems that don't
have, or don't fill in DTYPE properly.
I also clarified the real relationship between "exclude" and
"dir->show_ignored". It used to do
if (exclude != dir->show_ignored) {
..
which wasn't exactly obvious, because it triggers for two different
cases:
- the path is marked excluded, but we are not interested in ignored
files: ignore it
- the path is *not* excluded, but we *are* interested in ignored
files: ignore it unless it's a directory, in which case we might
have ignored files inside the directory and need to recurse
into it).
so this splits them into those two cases, since the first case
doesn't even care about the type.
I also made a the DT_UNKNOWN case a separate helper function,
and added some commentary to the cases.
Linus
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
* git://git.kernel.org/pub/scm/gitk/gitk:
gitk: Fix "can't unset prevlines(...)" Tcl error
gitk: Avoid an error when cherry-picking if HEAD has moved on
gitk: Check that we are running on at least Tcl/Tk 8.4
gitk: Do not pick up file names of "copy from" lines
gitk: Add support for OS X mouse wheel
gitk: disable colours when calling git log
Merge branch 'maint' of git://repo.or.cz/git-gui into maint
* 'maint' of git://repo.or.cz/git-gui:
git-gui: Don't display CR within console windows
git-gui: Handle progress bars from newer gits
git-gui: Correctly report failures from git-write-tree
git-gui: accept versions containing text annotations, like 1.5.3.mingw.1
git-gui: Don't crash when starting gitk from a browser session
git-gui: Allow gitk to be started on Cygwin with native Tcl/Tk
git-gui: Ensure .git/info/exclude is honored in Cygwin workdirs
git-gui: Handle starting on mapped shares under Cygwin
git-gui: Display message box when we cannot find git in $PATH
git-gui: Avoid using bold text in entire gui for some fonts
This fixes the error reported by Michele Ballabio, where gitk will
throw a Tcl error "can't unset prevlines(...)" when displaying a
commit that has a parent commit listed more than once, and the commit
is the first child of that parent.
The problem was basically that we had two variables, prevlines and
lineends, and were relying on the invariant that prevlines($id) was
set iff $id was in the lineends($r) list for some $r. But having
a duplicate parent breaks that invariant since we end up with the
parent listed twice in lineends.
This fixes it by simplifying the logic to use only a single variable,
lineend. It also rearranges things a little so that we don't try to
draw the line for the duplicated parent twice.
Define compat version of mkdtemp for systems lacking it
Solaris 9 doesn't have mkdtemp() so we need to emulate it for the
rsync transport implementation. Since Solaris 9 is lacking this
function we can also reasonably assume it is not available on
Solaris 8 either. The new Makfile definition NO_MKDTEMP can be
set to enable the git compat version.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Deduce exec_path also from calls to git with a relative path
There is already logic in the git wrapper to deduce the exec_path from
argv[0], when the git wrapper was called with an absolute path. Extend
that logic to handle relative paths as well.
For example, when you call "../../hello/world/git", it will not turn
"../../hello/world" into an absolute path, and use that.
Initial implementation by Scott R Parish.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
fast-import: Fix argument order to die in file_change_m
The arguments to the "Not a blob" die call in file_change_m were
transposed, so that the command was printed as the type, and the type
as the command. Switch them around so that the error message comes
out correctly.
Signed-off-by: Julian Phillips <julian@quantumfyre.co.uk> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Git progress bars from tools like git-push and git-fetch use CR
to skip back to the start of the current line and redraw it with
an updated progress. We were doing this in our Tk widget but had
failed to skip the CR, which Tk doesn't draw well.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Post Git 1.5.3 a new style progress bar has been introduced that
uses only one line rather than two. The formatting of the completed
and total section is also slightly different so we must adjust our
regexp to match. Unfortunately both styles are in active use by
different versions of Git so we need to look for both.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
The current git-p4 implementation does support file renames. However, because
it does not use the "p4 integrate" command, the history for the renamed file is
not linked to the new file.
This changeset adds support for perforce renames with the integrate command.
Currently this feature is only enabled when calling git-p4 submit with the -M
option. This is intended to look and behave similar to the "detect renames"
feature of other git commands.
The following sequence is used for renamed files:
p4 integrate -Dt x x'
p4 edit x'
rm x'
git apply
p4 delete x
By default, perforce will not allow an integration with a target file that has
been deleted. That is, if x' in the example above is the name of a previously
deleted file then perforce will fail the integrate. The -Dt option tells
perforce to allow the target of integrate to be a previously deleted file.
Signed-off-by: Chris Pettitt <cpettitt@gmail.com> Signed-off-by: Simon Hausmann <simon@lst.de>
gitk: Avoid an error when cherry-picking if HEAD has moved on
This fixes an error reported by Adam Piątyszek: if the current HEAD
is not in the graph that gitk knows about when we do a cherry-pick
using gitk, then gitk hits an error when trying to update its
internal representation of the topology. This avoids the error by
not doing that update if the HEAD before the cherry-pick was a
commit that gitk doesn't know about.
gitk: Check that we are running on at least Tcl/Tk 8.4
This checks that we have Tcl/Tk 8.4 or later, and puts up an error
message in a window and quits if not.
This was prompted by a patch submitted by Steffen Prohaska, but is
done a bit differently (this uses package require rather than
looking at [info tclversion], and uses show_error to display the
error rather than printing it to stderr).
git-gui: Correctly report failures from git-write-tree
If git-write-tree fails (such as if the index file is currently
locked and it wants to write to it) we were not getting the error
message as $tree_id was always the empty string so we shortcut
through the catch and never got the output from stderr.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
gitk: Do not pick up file names of "copy from" lines
A file copy would be detected only if the original file was modified in the
same commit. This implies that there will be a patch listed under the
original file name, and we would expect that clicking the original file
name in the file list warps the patch window to that file's patch. (If the
original file was not modified, the copy would not be detected in the first
place, the copied file would be listed as "new file", and this whole matter
would not apply.)
However, if the name of the copy is sorted after the original file's patch,
then the logic introduced by commit d1cb298b0b (which picks up the link
information from the "copy from" line) would overwrite the link
information that is already present for the original file name, which was
parsed earlier. Hence, this patch reverts part of said commit.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
(Väinö Järvelä supplied this patch a while ago for 1.5.2. It no longer
applied cleanly, so I'm reposting it.)
MacBook doesn't seem to recognize MouseRelease-4 and -5 events, at all.
So i added a support for the MouseWheel event, which i limited to Tcl/tk
aqua, as i couldn't test it neither on Linux or Windows. Tcl/tk needs to
be updated from the version that is shipped with OS X 10.4 Tiger, for
this patch to work.
Signed-off-by: Jonathan del Strother <jon.delStrother@bestbefore.tv> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
When matching source and destination refs, we were failing
to pull the 'force' parameter from wildcard refspecs (but
not explicit ones) and attach it to the ref struct.
This adds a test for explicit and wildcard refspecs; the
latter fails without this patch.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
The logic in stopfinding assumes that findcurline will be set if
find_dirn is, but findnext and findprev can set find_dirn without
setting findcurline. This makes sure we only set find_dirn in those
places if findcurline is already set.
Avoid scary errors about tagged trees/blobs during git-fetch
This is the same bug as 42a32174b600f139b489341b1281fb1bfa14c252.
The warning "Object $X is a tree, not a commit" is bogus and is
not relevant here. If its not a commit we just need to make sure
we don't mark it for merge as we fill out FETCH_HEAD.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
In 89d750bf6fa025edeb31ad258cdd09a27a5c02fa I got a little too
aggressive with changing "git diff" to "git diff-tree". This is
shown to the user, who expects to see a full diff on their console,
and will want to see the output of their custom diff drivers (if
any) as the whole point of this call site is to show the diff to
the end-user.
Noticed by Johannes Sixt <j.sixt@viscovery.net>.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
* maint:
Further 1.5.3.5 fixes described in release notes
Avoid invoking diff drivers during git-stash
attr: fix segfault in gitattributes parsing code
Define NI_MAXSERV if not defined by operating system
Ensure we add directories in the correct order
Avoid scary errors about tagged trees/blobs during git-fetch
Documentation/git-gc: improve description of --auto
This patch tries to make the description of --auto a little
more clear for new users, especially those referred by the
"git-gc --auto" notification message.
It also cleans up some grammatical errors and typos in the
original description, as well as rewording for clarity.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Documentation/git-gc: explain --auto in description
Now that git-gc --auto tells the user to look at the man
page, it makes sense to mention the auto behavior near the
top (since this is likely to be most users' first exposure
to git-gc).
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
The previous message had too much of a "boy, you should
really turn off this annoying gc" flair to it. Instead,
let's make sure the user understands what is happening, that
they can run it themselves, and where to find more info.
Suggested by Brian Gernhardt.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
git-stash needs to restrict itself to plumbing when running automated
diffs as part of its operation as the user may have configured a
custom diff driver that opens an interactive UI for certain/all
files. Doing that during scripted actions is very unfriendly to
the end-user and may cause git-stash to fail to work.
Reported by Johannes Sixt
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
git may segfault if gitattributes contains an invalid
entry. A test is added to t0020 that triggers the segfault.
The parsing code is fixed to avoid the crash.
Signed-off-by: Steffen Prohaska <prohaska@zib.de> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Define NI_MAXSERV if not defined by operating system
I found I needed NI_MAXSERV as it is defined in netdb.h, which is
not included by daemon.c. Rather than including the whole header
we can define a reasonable fallback value.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Avoid scary errors about tagged trees/blobs during git-fetch
Ok, what is going on is:
- append_fetch_head() looks up the SHA1 for all heads (including tags):
if (get_sha1(head, sha1))
return error("Not a valid object name: %s", head);
- it then wants to check if it's a candidate for merging (because
fetching also does the whole "list which heads to merge" in case
it is going to be part of a "pull"):
commit = lookup_commit_reference(sha1);
if (!commit)
not_for_merge = 1;
- and that "lookup_commit_reference()" is just very vocal about the
case where it fails. It really shouldn't be, and it shouldn't
affect the actual end result, but that basically explains why
you get that scary warning.
In short, the warning is just bogus, and should be harmless, but
I agree that it's ugly. I think the appended patch should fix it.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
* maint:
Yet more 1.5.3.5 fixes mentioned in release notes
cvsserver: Use exit 1 instead of die when req_Root fails.
git-blame shouldn't crash if run in an unmerged tree
git-config: print error message if the config file cannot be read
fixing output of non-fast-forward output of post-receive-email
git-blame shouldn't crash if run in an unmerged tree
If we are in the middle of resolving a merge conflict there may be
one or more files whose entries in the index represent an unmerged
state (index entries in the higher-order stages).
Attempting to run git-blame on any file in such a working directory
resulted in "fatal: internal error: ce_mode is 0" as we use the magic
marker for an unmerged entry is 0 (set up by things like diff-lib.c's
do_diff_cache() and builtin-read-tree.c's read_tree_unmerged())
and the ce_match_stat_basic() function gets upset about this.
I'm not entirely sure that the whole "ce_mode = 0" case is a good
idea to begin with, and maybe the right thing to do is to remove
that horrid freakish special case, but removing the internal error
seems to be the simplest fix for now.
Linus
[sp: Thanks to Björn Steinbrink for the test case]
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>