* sp/maint-push-sideband:
receive-pack: Send internal errors over side-band #2
t5401: Use a bare repository for the remote peer
receive-pack: Send hook output over side band #2
receive-pack: Wrap status reports inside side-band-64k
receive-pack: Refactor how capabilities are shown to the client
send-pack: demultiplex a sideband stream with status data
run-command: support custom fd-set in async
run-command: Allow stderr to be a caller supplied pipe
* np/fast-import-idx-v2:
fast-import: use the diff_delta() max_delta_size argument
fast-import: honor pack.indexversion and pack.packsizelimit config vars
fast-import: make default pack size unlimited
fast-import: use write_idx_file() instead of custom code
fast-import: use sha1write() for pack data
fast-import: start using struct pack_idx_entry
This commit fixes a bug in processing project-specific override in
a situation when there is no project, e.g. for the projects list page.
When 'snapshot' feature had project specific config override enabled
by putting
$feature{'snapshot'}{'override'} = 1;
(or equivalent) in $GITWEB_CONFIG, and when viewing toplevel gitweb
page, which means the projects list page (to be more exact this
happens for any project-less action), gitweb would put the following
Perl warnings in error log:
gitweb.cgi: Use of uninitialized value $git_dir in concatenation (.) or string at gitweb.cgi line 2065.
fatal: error processing config file(s)
gitweb.cgi: Use of uninitialized value $git_dir in concatenation (.) or string at gitweb.cgi line 2221.
gitweb.cgi: Use of uninitialized value $git_dir in concatenation (.) or string at gitweb.cgi line 2218.
The problem is in the following fragment of code:
# path to the current git repository
our $git_dir;
$git_dir = "$projectroot/$project" if $project;
# list of supported snapshot formats
our @snapshot_fmts = gitweb_get_feature('snapshot');
@snapshot_fmts = filter_snapshot_fmts(@snapshot_fmts);
For the toplevel gitweb page, which is the list of projects, $project is not
defined, therefore neither is $git_dir. gitweb_get_feature() subroutine
calls git_get_project_config() if project specific override is turned
on... but we don't have project here.
Those errors mentioned above occur in the following fragment of code in
git_get_project_config():
# get config
if (!defined $config_file ||
$config_file ne "$git_dir/config") {
%config = git_parse_project_config('gitweb');
$config_file = "$git_dir/config";
}
git_parse_project_config() calls git_cmd() which has '--git-dir='.$git_dir
There are (at least) three possible solutions:
1. Harden gitweb_get_feature() so that it doesn't call
git_get_project_config() if $project (and therefore $git_dir) is not
defined; there is no project for project specific config.
2. Harden git_get_project_config() like you did in your fix, returning early
if $git_dir is not defined.
3. Harden git_cmd() so that it doesn't add "--git-dir=$git_dir" if $git_dir
is not defined, and change git_get_project_config() so that it doesn't
even try to access $git_dir if it is not defined.
This commit implements both 1.) and 2.), i.e. gitweb_get_feature() doesn't
call project-specific override if $git_dir is not defined (if there is no
project), and git_get_project_config() returns early if $git_dir is not
defined.
Add a test for this bug to t/t9500-gitweb-standalone-no-errors.sh test.
Reported-by: Eli Barzilay <eli@barzilay.org> Signed-off-by: Jakub Narebski <jnareb@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
bisect: error out when passing bad path parameters
As reported by Mark Lodato, "git bisect", when it was started with
path parameters that match no commit was kind of working without
taking account of path parameters and was reporting something like:
Bisecting: -1 revisions left to test after this (roughly 0 steps)
It is more correct and safer to just error out in this case, before
displaying the revisions left, so this patch does just that.
Note that this bug is very old, it exists at least since v1.5.5.
And it is possible to detect that case earlier in the bisect
algorithm, but it is not clear that it would be an improvement to
error out earlier, on the contrary it may change the behavior of
"git rev-list --bisect-all" for example, which is currently correct.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove reference to GREP_COLORS from documentation
There is no longer support for external grep, as per bbc09c2 (grep: rip
out support for external grep, 2010-01-12), so remove the reference to it
from the documentation.
Signed-off-by: Mark Lodato <lodatom@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, prune treated an expiration time of 0 to mean that no
expire argument was supplied, and everything should be pruned. As a
result, "prune --expire=never" would prune all unreachable objects,
regardless of their timestamp.
prune can be called with --expire=never automatically by gc, when the
gc.pruneExpire configuration is set to "never".
Signed-off-by: Adam Simpkins <simpkins@facebook.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The convention for this particular page is to use AsciiDoc literal
strings only for options (`-x` or `--long`), but not for definition list
terms and not for <meta-vars>.
Signed-off-by: Mark Lodato <lodatom@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix gitmkdtemp: correct test for mktemp() return value
In gitmkdtemp, the return value of mktemp is not tested correctly.
mktemp() always returns its 'template' argument, even upon failure.
An error is signalled by making the template an empty string.
Signed-off-by: Filippo Negroni <fnegroni@flexerasoftware.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rather than only clearing GIT_INDEX_FILE, take the list of environment
variables to clear from local_repo_env, appending the settings for
GIT_DIR and GIT_WORK_TREE.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
submodules: ensure clean environment when operating in a submodule
git-submodule used to take care of clearing GIT_DIR whenever it operated
on a submodule index or configuration, but forgot to unset GIT_WORK_TREE
or other repo-local variables. This would lead to failures e.g. when
GIT_WORK_TREE was set.
This only happened in very unusual contexts such as operating on the
main worktree from outside of it, but since "git-gui: set GIT_DIR and
GIT_WORK_TREE after setup" (a9fa11fe5bd5978bb) such failures could also
be provoked by invoking an external tool such as "git submodule update"
from the Git Gui in a standard setup.
Solve by using the newly introduced clear_local_git_env() shell function
to ensure that all repo-local environment variables are unset.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce an auxiliary function to clear all repo-local environment
variables. This should be invoked by any shell script that switches
repository during execution, to ensure that the environment is clean
and that things such as the git dir and worktree are set up correctly.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the list of GIT_* environment variables that are local to a
repository into a static list in environment.c, as it is also
useful elsewhere. Also add the missing GIT_CONFIG variable to the
list.
Make it easy to use the list both by NULL-termination and by size;
the latter (excluding the terminating NULL) is stored in the
local_repo_env_size define.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
pack-objects documentation: reword "objects that appear in the standard input"
These were written back when we always read objects from the standard
input. These days --revs and its friends can feed only the start and
end points and have the command internally enumerate the objects.
fetch --all/--multiple: keep all the fetched branch information
Since "git fetch" learned "--all" and "--multiple" options, it has become
tempting for users to say "git pull --all". Even though it may fetch from
remotes that do not need to be fetched from for merging with the current
branch, it is handy.
"git fetch" however clears the list of fetched branches every time it
contacts a different remote. Unless the current branch is configured to
merge with a branch from a remote that happens to be the last in the list
of remotes that are contacted, "git pull" that fetches from multiple
remotes will not be able to find the branch it should be merging with.
Make "fetch" clear FETCH_HEAD (unless --append is given) and then append
the list of branches fetched to it (even when --append is not given). That
way, "pull" will be able to find the data for the branch being merged in
FETCH_HEAD no matter where the remote appears in the list of remotes to be
contacted by "git fetch".
Reported-by: Michael Lukashov Signed-off-by: Junio C Hamano <gitster@pobox.com>
If you have a branch.$X.merge config option, but no branch.$X.remote, and
your configuration tries to push tracking branches, git will segfault.
The problem is that even though branch->merge_nr is 1, you don't actually
have an upstream since there is no remote. Other callsites generally
check explicitly that branch->merge is not NULL, so let's do that here,
too.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
All of these tests were bogus, as they created new directory and tried to
run "git pull" without even running "git init" in there. They were mucking
with the repository in $TEST_DIRECTORY.
While fixing it, modernize the style not to chdir around outside of
subshell. Otherwise a failed test will take us to an unexpected directory
and we need to chdir back to the test directory in each test, which is
ugly and error prone.
When git am does an automatic gc it doesn't clean up the rebase-apply
directory until after this has finished. This means that if the user
aborts the gc then future am or rebase operations will report that an
existing operation is in progress, which is undesirable and confusing.
Reported by Mark Brown <broonie@debian.org> through
http://bugs.debian.org/570966
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Documentation: mention conflict marker size argument (%L) for merge driver
23a64c9e (conflict-marker-size: new attribute, 2010-01-16) introduced the
new attribute and also pass the conflict marker size as %L to merge driver
commands. This documents the substitution.
Signed-off-by: Bert Wesarg <bert.wesarg@googlemail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
add-interactive: fix bogus diff header line ordering
When we look at a patch for adding hunks interactively, we
first split it into a header and a list of hunks. Some of
the header lines, such as mode changes and deletion, however,
become their own selectable hunks. Later when we reassemble
the patch, we simply concatenate the header and the selected
hunks. This leads to patches like this:
Notice how the deletion comes _after_ the ---/+++ lines,
when it should come before.
In many cases, we can get away with this as git-apply
accepts the slightly bogus input. However, in the specific
case of a deletion line that is being applied via "apply
-R", this malformed patch triggers an assert in git-apply.
This comes up when discarding a deletion via "git checkout
-p".
Rather than try to make git-apply accept our odd input,
let's just reassemble the patch in the correct order.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use git_mkstemp_mode instead of plain mkstemp to create object files
We used to unnecessarily give the read permission to group and others,
regardless of the umask, which isn't serious because the objects are
still protected by their containing directory, but isn't necessary
either.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git_mkstemps_mode: don't set errno to EINVAL on exit.
When reaching the end of git_mkstemps_mode, at least one call to open()
has been done, and errno has been set accordingly. Setting errno is
therefore not necessary, and actually harmfull since callers can't
distinguish e.g. permanent failure from ENOENT, which can just mean that
we need to create the containing directory.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use git_mkstemp_mode and xmkstemp_mode in odb_mkstemp, not chmod later.
We used to create 0600 files, and then use chmod to set the group and
other permission bits to the umask. This usually has the same effect
as a normal file creation with a umask.
But in the presence of ACLs, the group permission plays the role of
the ACL mask: the "g" bits of newly created files are chosen according
to default ACL mask of the directory, not according to the umask, and
doing a chmod() on these "g" bits affect the ACL's mask instead of
actual group permission.
In other words, creating files with 0600 and then doing a chmod to the
umask creates files which are unreadable by users allowed in the
default ACL. To create the files without breaking ACLs, we let the
umask do it's job at the file's creation time, and get rid of the
later chmod.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git_mkstemp_mode, xmkstemp_mode: variants of gitmkstemps with mode argument.
gitmkstemps emulates the behavior of mkstemps, which is usually used
to create files in a shared directory like /tmp/, hence, it creates
files with permission 0600.
Add git_mkstemps_mode() that allows us to specify the desired mode, and
make git_mkstemps() a wrapper that always uses 0600 to call it. Later we
will use git_mkstemps_mode() when creating pack files.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Right now, Git creates unreadable pack files on non-shared
repositories when the user has a umask of 077, even when the default
ACLs for the directory would give read/write access to a specific
user.
Loose object files are created world-readable, which doesn't break ACLs,
but isn't necessarily desirable.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Pagers that do not consume their input are dangerous: for example,
$ GIT_PAGER=: git log
$ echo $?
141
$
The only reason these tests were able to work before was that
'git log' would write to the pipe (and not fill it) before the
pager had time to terminate and close the pipe.
Fix it by using a program that consumes its input, namely wc (as
suggested by Johannes).
Reported-by: Johannes Sixt <j.sixt@viscovery.net> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
sha1_file: be paranoid when creating loose objects
We don't want the data being deflated and stored into loose objects
to be different from what we expect. While the deflated data is
protected by a CRC which is good enough for safe data retrieval
operations, we still want to be doubly sure that the source data used
at object creation time is still what we expected once that data has
been deflated and its CRC32 computed.
The most plausible data corruption may occur if the source file is
modified while Git is deflating and writing it out in a loose object.
Or Git itself could have a bug causing memory corruption. Or even bad
RAM could cause trouble. So it is best to make sure everything is
coherent and checksum protected from beginning to end.
To do so we compute the SHA1 of the data being deflated _after_ the
deflate operation has consumed that data, and make sure it matches
with the expected SHA1. This way we can rely on the CRC32 checked by
the inflate operation to provide a good indication that the data is still
coherent with its SHA1 hash. One pathological case we ignore is when
the data is modified before (or during) deflate call, but changed back
before it is hashed.
There is some overhead of course. Using 'git add' on a set of large files:
Before:
real 0m25.210s
user 0m23.783s
sys 0m1.408s
After:
real 0m26.537s
user 0m25.175s
sys 0m1.358s
The overhead is around 5% for full data coherency guarantee.
Signed-off-by: Nicolas Pitre <nico@fluxnic.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using read() instead of mmap() can be 39% speed up for 1Kb files and is
1% speed up 1Mb files. For larger files, it is better to use mmap(),
because the difference between is not significant, and when there is not
enough memory, mmap() performs much better, because it avoids swapping.
Signed-off-by: Dmitry Potapov <dpotapov@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
sha1_file: don't malloc the whole compressed result when writing out objects
There is no real advantage to malloc the whole output buffer and
deflate the data in a single pass when writing loose objects. That is
like only 1% faster while using more memory, especially with large
files where memory usage is far more. It is best to deflate and write
the data out in small chunks reusing the same memory instead.
For example, using 'git add' on a few large files averaging 40 MB ...
t7006-pager: if stdout is not a terminal, make a new one
Testing pagination requires (fake or real) access to a terminal so we
can see whether the pagination automatically kicks in, which makes it
hard to get good coverage when running tests without --verbose. There
are a number of ways to work around that:
- Replace all isatty calls with calls to a custom xisatty wrapper
that usually checks for a terminal but can be overridden for tests.
This would be workable, but it would require implementing xisatty
separately in three languages (C, shell, and perl) and making sure
that any code that is to be tested always uses the wrapper.
- Redirect stdout to /dev/tty. This would be problematic because
there might be no terminal available, and even if a terminal is
available, it might not be appropriate to spew output to it.
- Create a new pseudo-terminal on the fly and capture its output.
This patch implements the third approach.
The new test-terminal.perl helper uses IO::Pty from Expect.pm to create
a terminal and executes the program specified by its arguments with
that terminal as stdout. If the IO::Pty module is missing or not
working on a system, the test script will maintain its old behavior
(skipping most of its tests unless GIT_TEST_OPTS includes --verbose).
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --cherry-pick logic starts by counting the commits on each side,
so that it can filter away commits on the bigger one. However, so
far it missed an opportunity for optimization: it doesn't need to do
any work if either side is empty.
This in particular helps the common use-case 'git rebase -i HEAD~$n':
it internally uses --cherry-pick, but since HEAD~$n is a direct
ancestor the left side is always empty.
Signed-off-by: Thomas Rast <trast@student.ethz.ch> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git’s automatic pagination support has some subtleties. Add some
tests to make sure we don’t break:
- when git will use a pager by default;
- the effect of the --paginate and --no-pager options;
- the effect of pagination on use of color;
- how the choice of pager is configured.
This does not yet test:
- use of pager by scripted commands (git svn and git am);
- effect of the pager.* configuration variables;
- setting of the LESS variable.
Some features involve checking whether stdout is a terminal, so many
of these tests are skipped unless output is passed through to the
terminal (i.e., unless $GIT_TEST_OPTS includes --verbose).
The immediate purpose for these tests was to avoid making things worse
after the breakage from my jn/editor-pager series (see commit 376f39,
2009-11-20). Thanks to Sebastian Celis <sebastian@sebastiancelis.com>
for the report.
Helped-by: Jeff King <peff@peff.net> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current documentation suggests that --local also ignores any
objects in local packs, which is incorrect. Change the language to be
clearer and more parallel to the other options that ignore objects.
While we're at it, fix a trivial error in --incremental's
documentation.
Signed-off-by: Nelson Elhage <nelhage@mit.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
utf8.c: speculatively assume utf-8 in strbuf_add_wrapped_text()
is_utf8() works by calling utf8_width() for each character at the
supplied location. In strbuf_add_wrapped_text(), we do that anyway
while wrapping the lines. So instead of checking the encoding
beforehand, optimistically assume that it's utf-8 and wrap along
until an invalid character is hit, and when that happens start over.
This pays off if the text consists only of valid utf-8 characters.
The following command was run against the Linux kernel repo with
git 1.7.0:
$ time git log --format='%b' v2.6.32 >/dev/null
real 0m2.679s
user 0m2.580s
sys 0m0.100s
$ time git log --format='%w(60,4,8)%b' >/dev/null
real 0m4.342s
user 0m4.230s
sys 0m0.110s
And with this patch series:
$ time git log --format='%w(60,4,8)%b' >/dev/null
real 0m3.741s
user 0m3.630s
sys 0m0.110s
So the cost of wrapping is reduced to 70% in this case.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The patch before the previous one made sure that all callers of
strbuf_add_wrapped_text() supply a strbuf. Replace all calls of
strbuf_write() with regular strbuf functions and remove it.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous patch made sure that strbuf_add_wrapped_text() (and thus
strbuf_add_indented_text(), too) always get a strbuf. Make use of
this fact by adding strbuf_addchars(), a small helper that adds a
char the specified number of times to a strbuf, and use it to replace
print_spaces().
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix inadvertent breakage from b932705 (git-p4: stream from perforce to
speed up clones, 2009-07-30) in the code that strips the trailing '\n'
from p4 print on a symlink. (In practice, contents is of the form
['target\n', ''].)
Signed-off-by: Evan Powers <evan.powers@gmail.com> Acked-by: Pete Wyckoff <pw@padd.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t1450: fix testcases that were wrongly expecting failure
Almost exactly a year ago in 02a6552 (Test fsck a bit harder), I
introduced two testcases that were expecting failure.
However, the only bug was that the testcases wrote *blobs* because I
forgot to pass -t tag to hash-object. Fix this, and then adjust the
rest of the test to properly check the result.
Signed-off-by: Thomas Rast <trast@student.ethz.ch> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Documentation: Fix indentation problem in git-commit(1)
Ever since the "See linkgit:git-config[1]..." paragraph was added to the
description for --untracked-files (d6293d1), the paragraphs for the
following options were indented at the same level as the "See
linkgit:git-config[1]" paragraph. This problem showed up in the
manpages, but not in the HTML documentation.
While this does fix the alignment of the options following
--untracked-files in the manpage, the "See linkgit..." portion of the
description does not retain its previous indentation level in the
manpages, or HTML documentation.
Signed-off-by: Jacob Helwig <jacob.helwig@gmail.com> Acked-by: Thomas Rast <trast@student.ethz.ch> Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we remove a path in a/deep/subdirectory, we should try to
remove as many trailing components as possible (i.e.,
subdirectory, then deep, then a). However, the test for the
return value of rmdir was reversed, so we only ever deleted
at most one level.
The fix is in remove_path, so "apply" and "merge-recursive"
also are fixed.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The description for --thin was misleading and downright wrong. Correct
it with some inspiration from the description of index-pack's --fix-thin
and some background information from Nicolas Pitre <nico@fluxnic.net>.
Signed-off-by: Stephen Boyd <bebarino@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is misleading to say that we pull refs from $GIT_DIR/refs/*, because we
may also consult the packed refs mechanism. These days we tend to treat
the "refs hierarchy" as more of an abstract namespace that happens to be
represented as $GIT_DIR/refs. At best, this is a minor inaccuracy, but at
worst it can confuse users who then look in $GIT_DIR/refs and find that it
is missing some of the refs they expected to see.
This patch drops most uses of "$GIT_DIR/refs/*", changing them into just
"refs/*", under the assumption that users can handle the concept of an
abstract refs namespace. There are a few things to note:
- most cases just dropped the $GIT_DIR/ portion. But for cases where
that left _just_ the word "refs", I changed it to "refs/" to help
indicate that it was a hierarchy. I didn't do the same for longer
paths (e.g., "refs/heads" remained, instead of becoming
"refs/heads/").
- in some cases, no change was made, as the text was explicitly about
unpacked refs (e.g., the discussion in git-pack-refs).
- In some cases it made sense instead to note the existence of packed
refs (e.g., in check-ref-format and rev-parse).
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jk/cherry-pick-reword:
cherry-pick: prettify the advice message
cherry-pick: show commit name instead of sha1
cherry-pick: format help message as strbuf
cherry-pick: refactor commit parsing code
cherry-pick: rewrap advice message
fast-import: use the diff_delta() max_delta_size argument
This let diff_delta() abort early if it is going to bust the given
size limit. Also, only objects larger than 20 bytes are considered
as objects smaller than that are most certainly going to produce
larger deltas than the original object due to the additional headers.
Signed-off-by: Nicolas Pitre <nico@fluxnic.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that fast-import is creating packs with index version 2, there is
no point limiting the pack size by default. A pack split will still
happen if off_t is not sufficiently large to hold large offsets.
While updating the doc, let's remove the "packfiles fit on CDs"
suggestion. Pack files created by fast-import are still suboptimal and
a 'git repack -a -f -d' or even 'git gc --aggressive' would be a pretty
good idea before considering storage on CDs.
Signed-off-by: Nicolas Pitre <nico@fluxnic.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is in preparation for using write_idx_file(). Also, by using
sha1write() we get some buffering to reduces the number of write
syscalls, and the written data is SHA1 summed which allows for the extra
data integrity validation check performed in fixup_pack_header_footer()
(details on this in commit abeb40e5aa).
Signed-off-by: Nicolas Pitre <nico@fluxnic.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
With NONGIT_OK set, require_work_tree function outside a git repository
gives a syntax error. This is caused by an incorrect use of "test" that
didn't anticipate $(git rev-parse --is-inside-work-tree) may return an
empty string.
Properly quote the argument to "test", and send the standard error stream
to /dev/null to avoid giving duplicate error messages.
Signed-off-by: Gabriel Filion <lelutin@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a test for 'git add -u pathspec' and 'git add pathspec' where
pathspec does not exist. The expected result is that git add exits with
an error message and an appropriate exit code.
Signed-off-by: Chris Packham <judge.packham@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The program can decide at runtime not to use threading even if the support
is compiled in. In such a case, mutexes are not necessary and left
uninitialized. But the code incorrectly tried to take and release the
read_sha1_mutex unconditionally.
Signed-off-by: Junio C Hamano <gitster@pobox.com> Acked-by: Fredrik Kuivinen <frekui@gmail.com>
* maint-1.6.6:
dwim_ref: fix dangling symref warning
stash pop: remove 'apply' options during 'drop' invocation
diff: make sure --output=/bad/path is caught
Remove hyphen from "git-command" in two error messages
transport_get_remote_refs() in tranport.c checks transport->remote_refs
to determine whether transport->get_refs_list() should be invoked. The
logic is "if it is NULL, we haven't run ls-remote to find out yet".
However, transport->remote_refs could still be NULL while cloning from
an empty repository. This causes get_refs_list() to be run unnecessarily.
Introduce a flag, transport->got_remote_refs, to more explicitly record
if we have run transport->get_refs_list() already.
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com> Acked-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we encounter a symref that is dangling, in most cases we will warn
about it. The one exception is a dangling HEAD, as that indicates a
branch yet to be born.
However, the check in dwim_ref was not quite right. If we were fed
something like "HEAD^0" we would try to resolve "HEAD", see that it is
dangling, and then check whether the _original_ string we got was
"HEAD" (which it wasn't in this case). And that makes no sense; the
dangling thing we found was not "HEAD^0" but rather "HEAD".
Fixing this squelches a scary warning from "submodule summary HEAD" (and
consequently "git status" with status.submodulesummary set) in an empty
repo, as the submodule script calls "git rev-parse -q --verify HEAD^0".
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The option -w tells the diff machinery to inspect the contents to set the
exit status, instead of checking the blob object level difference alone.
However, --quiet tells the diff machinery not to look at the contents, which
means DIFF_FROM_CONTENTS has no chance to inspect the change.
Work it around by calling diff_flush_patch() with output sent to /dev/null.
Signed-off-by: Larry D'Anna <larry@elder-gods.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
stash pop: remove 'apply' options during 'drop' invocation
The 'git stash pop' option parsing used to remove the first argument
in --index mode. At the time this was implemented, this first
argument was always --index. However, since the invention of the -q
option in fcdd0e9 (stash: teach quiet option, 2009-06-17) you can
cause an internal invocation of
git stash drop --index
by running
git stash pop -q --index
which then of course fails because drop doesn't know --index.
To handle this, instead let 'git stash apply' decide what the future
argument to 'drop' should be.
Warning: this means that 'git stash apply' must parse all options that
'drop' can take, and deal with them in the same way. This is
currently true for its only option -q.
Signed-off-by: Thomas Rast <trast@student.ethz.ch> Acked-by: Stephen Boyd <bebarino@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The pagination functionality in git am has some problems:
- It does not check if stdout is a tty, so it always paginates.
- If $GIT_PAGER uses any environment variables, they are being
ignored, since it does not run $GIT_PAGER through eval.
- If $GIT_PAGER is set to the empty string, instead of passing
output through to stdout, it tries to run $dotest/patch.
Fix them. While at it, move the definition of git_pager() to
git-sh-setup so authors of other commands are not tempted to
reimplement it with the same mistakes.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
gitweb: Die if there are parsing errors in config file
Otherwise the errors can propagate, and show in damnest places, and
you would spend your time chasing ghosts instead of debugging real
problem (yes, it is from personal experience).
This follows (parts of) advice in `perldoc -f do` documentation.
This required restructoring code a bit, so we die only if we are reading
(executing) config file. As a side effect $GITWEB_CONFIG_SYSTEM is always
available, even when we use $GITWEB_CONFIG.
Signed-off-by: Jakub Narebski <jnareb@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
In commit dec543e (am -i, git-svn: use "git var GIT_PAGER"), I tried
to teach git svn to defer to git var on what pager to use. In the
process, I introduced two bugs:
- The value set for $pager in config_pager has local scope, so
run_pager never sees it;
- git var cannot tell whether git svn’s output is going to a
terminal, so the value chosen for $pager does not reflect that
information.
Fix them.
Reported-by: Sebastian Celis <sebastian@sebastiancelis.com> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>