Changed inaccurate count of "rough rules" from three to the more
generic 'a few'.
Signed-off-by: Julian Gindi <juliangindi@gmail.com> Reviewed-by: Eric Sunshine <sunshine@sunshineco.com> Reviewed-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
send-pack: unify error messages for unsupported capabilities
If --signed is not supported, the error message names the remote
"receiving end". If --atomic is not supported, the error message
names the remote "server". Unify the naming to "receiving end"
as we're in the context of "push".
Signed-off-by: Ralf Thielow <ralf.thielow@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
docs: clarify what git-rebase's "-p" / "--preserve-merges" does
Ignoring a merge can be read as ignoring the changes a merge commit
introduces altogether, as if the entire side branch the merge commit
merged was removed from the history. But that is not what happens
if "-p" is not specified. What happens is that the individual
commits a merge commit introduces are replayed in order, and only
any possible merge conflict resolutions or manual amendments to the
merge commit are ignored.
Get this straight in the docs.
Also, do not say that merge commits are *tried* to be recreated. As that is
true almost everywhere it is better left unsaid.
Signed-off-by: Sebastian Schuberth <sschuberth@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
An failure early in the "git clone" that started creating the
working tree and repository could have resulted in some directories
and files left without getting cleaned up.
* jk/cleanup-failed-clone:
clone: drop period from end of die_errno message
clone: initialize atexit cleanup handler earlier
"git fetch" that fetches a commit using the allow-tip-sha1-in-want
extension could have failed to fetch all the requested refs.
* jk/fetch-pack:
fetch-pack: remove dead assignment to ref->new_sha1
fetch_refs_via_pack: free extra copy of refs
filter_ref: make a copy of extra "sought" entries
filter_ref: avoid overwriting ref->old_sha1 with garbage
Merge branch 'tg/fix-check-order-with-split-index' into maint
The split-index mode introduced at v2.3.0-rc0~41 was broken in the
codepath to protect us against a broken reimplementation of Git
that writes an invalid index with duplicated index entries, etc.
* tg/fix-check-order-with-split-index:
read-cache: fix reading of split index
Merge branch 'jk/prune-with-corrupt-refs' into maint
"git prune" used to largely ignore broken refs when deciding which
objects are still being used, which could spread an existing small
damage and make it a larger one.
* jk/prune-with-corrupt-refs:
refs.c: drop curate_packed_refs
repack: turn on "ref paranoia" when doing a destructive repack
prune: turn on ref_paranoia flag
refs: introduce a "ref paranoia" flag
t5312: test object deletion code paths in a corrupted repository
* sb/leaks:
http: release the memory of a http pack request as well
read-cache: fix memleak
add_to_index(): free unused cache-entry
commit.c: fix a memory leak
http-push: remove unneeded cleanup
merge-recursive: fix memleaks
merge-blobs.c: fix a memleak
builtin/apply.c: fix a memleak
update-index: fix a memleak
read-cache: free cache entry in add_to_index in case of early return
Merge branch 'js/completion-ctags-pattern-substitution-fix' into maint
The code that reads from the ctags file in the completion script
(in contrib/) did not spell ${param/pattern/string} substitution
correctly, which happened to work with bash but not with zsh.
* js/completion-ctags-pattern-substitution-fix:
contrib/completion: escape the forward slash in __git_match_ctag
docs: clarify "preserve" option wording for git-pull
The "also" sounds as if "preserve" does a rebase as an additional
step that "true" would not do, but that is not the case. Clarify
this by omitting "also", and rewording the sentence a bit.
Signed-off-by: Sebastian Schuberth <sschuberth@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
People often forget to chain the commands in their test together
with &&, leaving a failure from an earlier command in the test go
unnoticed. The new GIT_TEST_CHAIN_LINT mechanism allows you to
catch such a mistake more easily.
* jk/test-chain-lint: (36 commits)
t9001: drop save_confirm helper
t0020: use test_* helpers instead of hand-rolled messages
t: simplify loop exit-code status variables
t: fix some trivial cases of ignored exit codes in loops
t7701: fix ignored exit code inside loop
t3305: fix ignored exit code inside loop
t0020: fix ignored exit code inside loops
perf-lib: fix ignored exit code inside loop
t6039: fix broken && chain
t9158, t9161: fix broken &&-chain in git-svn tests
t9104: fix test for following larger parents
t4104: drop hand-rolled error reporting
t0005: fix broken &&-chains
t7004: fix embedded single-quotes
t0050: appease --chain-lint
t9001: use test_when_finished
t4117: use modern test_* helpers
t6034: use modern test_* helpers
t1301: use modern test_* helpers
t0020: use modern test_* helpers
...
The help text for the --force-with-lease option to git-push
does not parse cleanly. Clean up the wording and syntax to
be more sensible. Also remove redundant information in the
"--force-with-lease alone" description.
Signed-off-by: Phil Hord <hordp@cisco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The run-command interface was easy to abuse and make a pipe for us
to read from the process, wait for the process to finish and then
attempt to read its output, which is a pattern that lead to a
deadlock. Fix such uses by introducing a helper to do this
correctly (i.e. we need to read first and then wait the process to
finish) and also add code to prevent such abuse in the run-command
helper.
* jk/run-command-capture:
run-command: forbid using run_command with piped output
trailer: use capture_command
submodule: use capture_command
wt-status: use capture_command
run-command: introduce capture_command helper
wt_status: fix signedness mismatch in strbuf_read call
wt-status: don't flush before running "submodule status"
"git prune" used to largely ignore broken refs when deciding which
objects are still being used, which could spread an existing small
damage and make it a larger one.
* jk/prune-with-corrupt-refs:
refs.c: drop curate_packed_refs
repack: turn on "ref paranoia" when doing a destructive repack
prune: turn on ref_paranoia flag
refs: introduce a "ref paranoia" flag
t5312: test object deletion code paths in a corrupted repository
The split-index mode introduced at v2.3.0-rc0~41 was broken in the
codepath to protect us against a broken reimplementation of Git
that writes an invalid index with duplicated index entries, etc.
* tg/fix-check-order-with-split-index:
read-cache: fix reading of split index
"git fetch" that fetches a commit using the allow-tip-sha1-in-want
extension could have failed to fetch all the requested refs.
* jk/fetch-pack:
fetch-pack: remove dead assignment to ref->new_sha1
fetch_refs_via_pack: free extra copy of refs
filter_ref: make a copy of extra "sought" entries
filter_ref: avoid overwriting ref->old_sha1 with garbage
An failure early in the "git clone" that started creating the
working tree and repository could have resulted in some directories
and files left without getting cleaned up.
* jk/cleanup-failed-clone:
clone: drop period from end of die_errno message
clone: initialize atexit cleanup handler earlier
"git log --graph --no-walk A B..." is a otcnflicting request that
asks nonsense; no-walk tells us show discrete points in the
history, while graph asks to draw connections between these
discrete points. Forbid the combination.
* dj/log-graph-with-no-walk:
revision: forbid combining --graph and --no-walk
"git rev-list --bisect --first-parent" does not work (yet) and can
even cause SEGV; forbid it. "git log --bisect --first-parent"
would not be useful until "git bisect --first-parent" materializes,
so it is also forbidden for now.
* kd/rev-list-bisect-first-parent:
rev-list: refuse --first-parent combined with --bisect
The idea of this helper is that we want to save the current
value of a config variable and then restore it again after
the test completes. However, there's no point in actually
saving the value; it should always be restored to the string
"never" (which you can confirm by instrumenting
save_confirm to print the value it finds).
Let's just replace it with a single test_when_finished call.
Suggested-by: SZEDER Gábor <szeder@ira.uka.de> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t0020: use test_* helpers instead of hand-rolled messages
These tests are not wrong, but it is much shorter and more
idiomatic to say "verbose" or "test_must_fail" rather than
printing our own messages on failure. Likewise, there is no
need to say "happy" at the end of a test; the test suite
takes care of that.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since shell loops may drop the exit code of failed commands
inside the loop, some tests try to keep track of the status
by setting a variable. This can end up cumbersome and hard
to read; it is much simpler to just exit directly from the
loop using "return 1" (since each case is either in a helper
function or inside a test snippet).
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t: fix some trivial cases of ignored exit codes in loops
These are all cases where we do a setup step of the form:
for i in $foo; do
set_up $i || break
done &&
more_setup
would not notice a failure in set_up (because break always
returns a 0 exit code). These are just setup steps that we
do not expect to fail, but it does not hurt to be defensive.
Most can be fixed by converting the "break" to a "return 1"
(since we eval our tests inside a function for just this
purpose). A few of the loops are inside subshells, so we can
use just "exit 1" to break out of the subshell. And a few
can actually be made shorter by just unrolling the loop.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
When checking a list of file mtimes, we use a loop and break
out early from the loop if any entry does not match.
However, the exit code of a loop exited via break is always
0, meaning that the test will fail to notice we had a
mismatch. Since the loop is inside a function, we can fix
this by doing an early "return 1".
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we test deleting notes, we run "git notes remove" in a
loop. However, the exit value of the loop will only reflect
the final note we process. We should break out of the loop
with a failing exit code as soon as we see a problem.
Note that we can call "exit 1" here without explicitly
creating a subshell, because the while loop on the
right-hand side of a pipe executes in its own implicit
subshell.
Note also that the "break" above does not suffer the same
problem; it is meant to exit the loop early at a certain
number of iterations. We can bump it into the conditional of
the loop to make this more obvious.
Signed-off-by: Jeff King <peff@peff.net> Acked-by: Johan Herland <johan@herland.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
will correctly break out of the loop when we see a failure
of one item, but the resulting exit code will always be
zero. We can fix that by putting the loop into a function or
subshell, but in this case it is simpler still to just
unroll the loop. We do add a helper function, which
hopefully makes the end result even more readable (in
addition to being shorter).
Reported-by: SZEDER Gábor <szeder@ira.uka.de> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
When copying the test repository, we try to detect whether
the copy succeeded. However, most of the heavy lifting is
done inside a for loop, where our "break" will lose the exit
code of the failing "cp". We can take advantage of the fact
that we are in a subshell, and just "exit 1" to break out
with a code.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge branch 'master' of git://ozlabs.org/~paulus/gitk
* 'master' of git://ozlabs.org/~paulus/gitk:
gitk: Update .po files
gitk: l10n: Add Catalan translation
gitk: Fix typo in Russian translation
gitk: Remove tcl-format flag from a message that shouldn't have it
gitk: Pass --invert-grep option down to "git log"
gitk: Synchronize config file writes
gitk: Report errors in saving config file
gitk: Only write changed configuration variables
gitk: Enable mouse horizontal scrolling in diff pane
gitk: Default wrcomcmd to use --pretty=email
The expected call sequence is for the caller to use match_pathspec()
repeatedly on a set of pathspecs, accumulating the "hits" in a
separate array, and then call this function to diagnose a pathspec
that never matched anything, as that can indicate a typo from the
command line, e.g. "git commit Maekfile".
Many builtin commands use this function from builtin/ls-files.c,
which is not a very healthy arrangement. ls-files might have been
the first command to feel the need for such a helper, but the need
is shared by everybody who uses the "match and then report" pattern.
Move it to dir.c where match_pathspec() is defined.
At the first look, a user may think the default version is "23". Even
with UNIX background, there's no reference anywhere close that may
indicate this is glob or regex.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code that reads from the ctags file in the completion script
(in contrib/) did not spell ${param/pattern/string} substitution
correctly, which happened to work with bash but not with zsh.
* js/completion-ctags-pattern-substitution-fix:
contrib/completion: escape the forward slash in __git_match_ctag
Restructure "git push" codepath to make it easier to add new
configuration bits and then add push.followTags configuration that
turns --follow-tags option on by default.
* jk/push-config:
push: allow --follow-tags to be set by config push.followTags
cmd_push: pass "flags" pointer to config callback
cmd_push: set "atomic" bit directly
git_push_config: drop cargo-culted wt_status pointer