Code clean-up (and a bugfix which has been merged for 2.0).
* jk/external-diff-use-argv-array:
run_external_diff: refactor cmdline setup logic
run_external_diff: hoist common bits out of conditional
run_external_diff: drop fflush(NULL)
run_external_diff: clean up error handling
run_external_diff: use an argv_array for the environment
* rs/ref-update-check-errors-early:
commit.c: check for lock error and return early
sequencer.c: check for lock failure and bail early in fast_forward_to
Read-only operations such as "git status" that internally refreshes
the index write out the refreshed index to the disk to optimize
future accesses to the working tree, but this could race with a
"read-write" operation that modify the index while it is running.
Detect such a race and avoid overwriting the index.
Duy raised a good point that we may need to do the same for the
normal writeout codepath, not just the "opportunistic" update
codepath. While that is true, nobody sane would be running two
simultaneous operations that are clearly write-oriented competing
with each other against the same index file. So in that sense that
can be done as a less urgent follow-up for this topic.
* ym/fix-opportunistic-index-update-race:
read-cache.c: verify index file before we opportunistically update it
wrapper.c: add xpread() similar to xread()
Update "update-ref --stdin [-z]" and then introduce a transactional
support for (multi-)reference updates.
* mh/ref-transaction: (27 commits)
ref_transaction_commit(): work with transaction->updates in place
struct ref_update: add a type field
struct ref_update: add a lock field
ref_transaction_commit(): simplify code using temporary variables
struct ref_update: store refname as a FLEX_ARRAY
struct ref_update: rename field "ref_name" to "refname"
refs: remove API function update_refs()
update-ref --stdin: reimplement using reference transactions
refs: add a concept of a reference transaction
update-ref --stdin: harmonize error messages
update-ref --stdin: improve the error message for unexpected EOF
t1400: test one mistake at a time
update-ref --stdin -z: deprecate interpreting the empty string as zeros
update-ref.c: extract a new function, parse_next_sha1()
t1400: test that stdin -z update treats empty <newvalue> as zeros
update-ref --stdin: simplify error messages for missing oldvalues
update-ref --stdin: make error messages more consistent
update-ref --stdin: improve error messages for invalid values
update-ref.c: extract a new function, parse_refname()
parse_cmd_verify(): copy old_sha1 instead of evaluating <oldvalue> twice
...
Instead of running N pair-wise diff-trees when inspecting a
N-parent merge, find the set of paths that were touched by walking
N+1 trees in parallel. These set of paths can then be turned into
N pair-wise diff-tree results to be processed through rename
detections and such. And N=2 case nicely degenerates to the usual
2-way diff-tree, which is very nice.
* ks/tree-diff-nway:
mingw: activate alloca
combine-diff: speed it up, by using multiparent diff tree-walker directly
tree-diff: rework diff_tree() to generate diffs for multiparent cases as well
Portable alloca for Git
tree-diff: reuse base str(buf) memory on sub-tree recursion
tree-diff: no need to call "full" diff_tree_sha1 from show_path()
tree-diff: rework diff_tree interface to be sha1 based
tree-diff: diff_tree() should now be static
tree-diff: remove special-case diff-emitting code for empty-tree cases
tree-diff: simplify tree_entry_pathcmp
tree-diff: show_path prototype is not needed anymore
tree-diff: rename compare_tree_entry -> tree_entry_pathcmp
tree-diff: move all action-taking code out of compare_tree_entry()
tree-diff: don't assume compare_tree_entry() returns -1,0,1
tree-diff: consolidate code for emitting diffs and recursion in one place
tree-diff: show_tree() is not needed
tree-diff: no need to pass match to skip_uninteresting()
tree-diff: no need to manually verify that there is no mode change for a path
combine-diff: move changed-paths scanning logic into its own function
combine-diff: move show_log_first logic/action out of paths scanning
"--ignore-space-change" option of "git apply" ignored the
spaces at the beginning of line too aggressively, which is
inconsistent with the option of the same name "diff" and "git diff"
have.
* jc/apply-ignore-whitespace:
apply --ignore-space-change: lines with and without leading whitespaces do not match
These were originally removed by 0232852 (t5537: move
http tests out to t5539, 2014-02-13). However, they were
accidentally re-added in 1ddb4d7 (Merge branch
'nd/upload-pack-shallow', 2014-03-21).
This looks like an error in manual conflict resolution.
Here's what happened:
1. v1.9.0 shipped with the http tests in t5537.
2. We realized that this caused problems, and built 0232852 on top to move the tests to their own file.
This fix made it into v1.9.1.
3. We later had another fix in nd/upload-pack-shallow that
also touched t5537. It was built directly on v1.9.0.
When we merged nd/upload-pack-shallow to master, we got a
conflict; it was built on a version with the http tests, but
we had since removed them. The correct resolution was to
drop the http tests and keep the new ones, but instead we
kept everything.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mw/symlinks:
setup: fix windows path buffer over-stepping
setup: don't dereference in-tree symlinks for absolute paths
setup: add abspath_part_inside_repo() function
t0060: add tests for prefix_path when path begins with work tree
t0060: add test for prefix_path when path == work tree
t0060: add test for prefix_path on symlinks via absolute paths
t3004: add test for ls-files on symlinks via absolute paths
Instead of showing a warning and working as before, fail and show
the message and force immediate upgrade from their upstream
repositories when these tools are run, per request from their
primary author.
The author of the original topic says he broke the upcoming 2.0
release with something that relates to "synchronization crash
regression" while refusing to give further specifics, so this would
unfortunately be the safest option for the upcoming release.
git-prompt.sh: don't assume the shell expands the value of PS1
Not all shells subject the prompt string to parameter expansion. Test
whether the shell will expand the value of PS1, and use the result to
control whether raw ref names are included directly in PS1.
This fixes a regression introduced in commit 8976500 ("git-prompt.sh:
don't put unsanitized branch names in $PS1"): zsh does not expand PS1
by default, but that commit assumed it did. The bug resulted in
prompts containing the literal string '${__git_ps1_branch_name}'
instead of the actual branch name.
Reported-by: Caleb Thompson <caleb@calebthompson.io> Signed-off-by: Richard Hansen <rhansen@bbn.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-gui: tolerate major version changes when comparing the git version
Since git 2.0.0 starting git gui in a submodule using a gitfile fails with
the following error:
No working directory ../../../<path>
couldn't change working directory
to "../../../<path>": no such file or
directory
This is because "git rev-parse --show-toplevel" is only run when git gui
sees a git version of at least 1.7.0 (which is the version in which the
--show-toplevel option was introduced). But "package vsatisfies" returns
false when the major version changes, which is not what we want here.
Fix that for both places where the git version is checked using vsatisfies
by appending a '-' to the version number. This tells vsatisfies that a
change of the major version is not considered to be a problem, as long as
the new major version is larger. This is done for both the place that
caused the reported bug and another spot where the git version is tested
for another feature.
Reported-by: Chris Packham <judge.packham@gmail.com> Reported-by: Yann Dirson <ydirson@free.fr> Helped-by: Pat Thoyts <patthoyts@users.sourceforge.net> Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de> Tested-by: Chris Packham <judge.packham@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Otherwise it might collide with a function of the same name in the
user's environment.
Suggested-by: SZEDER Gábor <szeder@ira.uka.de> Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The stray "+" has been there ever since the example was added in
v1.8.3-rc0~210^2 (shell: new no-interactive-login command to print a
custom message, 2013-03-09). The "+" sign between paragraphs is
needed in asciidoc to attach extra paragraphs to a list item but here
it is not needed and ends up rendered as a literal "+". Remove it.
A quick search with "grep -e '<p>+' /usr/share/doc/git/html/*.html"
doesn't find any other instances of this problem.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge branch 'km/avoid-non-function-return-in-rebase' into maint
"git rebase" used a POSIX shell construct FreeBSD /bin/sh does not
work well with.
* km/avoid-non-function-return-in-rebase:
Revert "rebase: fix run_specific_rebase's use of "return" on FreeBSD"
rebase: avoid non-function use of "return" on FreeBSD
Describe one last minute one-liner fix for regression introduced in
1.9, and fix a grave mischaracterization on a recent remote-hg/bzr
change, pointed out by Felipe.
git-p4: format-patch to diff-tree change breaks binary patches
When applying binary patches a full index is required. format-patch
already handles this, but diff-tree needs '--full-index' argument
to always output full index. When git-p4 runs git-apply to test
the patch, git-apply rejects the patch due to abbreviated blob
object names. This is the error message git-apply emits in this
case:
error: cannot apply binary patch to '<filename>' without full index line
error: <filename>: patch does not apply
Signed-off-by: Tolga Ceylan <tolga.ceylan@gmail.com> Acked-by: Pete Wyckoff <pw@padd.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Makefile: default to -lcurl when no CURL_CONFIG or CURLDIR
The original implementation of CURL_CONFIG support did not match the
original behavior of using -lcurl when CURLDIR was not set. This broke
implementations that were lacking curl-config but did have libcurl
installed along system libraries, such as MSysGit. In other words, the
assumption that curl-config is always installed was incorrect.
Instead, if CURL_CONFIG is empty or returns an empty result (e.g. due
to curl-config being missing), use the old behavior of falling back to
-lcurl.
Signed-off-by: Dave Borowitz <dborowitz@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a buffer over-stepping issue triggered by providing an absolute path
that is similar to the work tree path.
abspath_part_inside_repo() may currently increment the path pointer by
offset_1st_component() + wtlen, which is too much, since
offset_1st_component() is a subset of wtlen.
For the *nix-style prefix '/', this does (by luck) not cause any issues,
since offset_1st_component() is 1 and there will always be a '/' or '\0'
that can "absorb" this.
In the case of DOS-style prefixes though, the offset_1st_component() is
3 and this can potentially over-step the string buffer. For example if
work_tree = "c:/r"
path = "c:/rl"
Then wtlen is 4, and incrementing the path pointer by (3 + 4) would
end up 2 bytes outside a string buffer of length 6.
Similarly if
work_tree = "c:/r"
path = "c:/rl/d/a"
Then (since the loop starts by also incrementing the pointer one step),
this would mean that the function would miss checking if "c:/rl/d" could
be the work_tree, arguably this is unlikely though, since it would only
be possible with symlinks on windows.
Fix this by simply avoiding to increment by offset_1st_component() and
wtlen at the same time.
Signed-off-by: Martin Erik Werner <martinerikwerner@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make sure the marks are not written out when the transport helper
did not finish happily, to avoid leaving a marks file that is out of
sync with the reality.
* fc/transport-helper-sync-error-fix:
t5801 (remote-helpers): cleanup environment sets
transport-helper: fix sync issue on crashes
transport-helper: trivial cleanup
transport-helper: propagate recvline() error pushing
remote-helpers: make recvline return an error
transport-helper: remove barely used xchgline()
Versions of Perl's Getopt::Long module before 2.37 do not contain
this fix that first appeared in Getopt::Long version 2.37:
* Bugfix: With gnu_compat, --foo= will no longer trigger "Option
requires an argument" but return the empty string.
Instead of using --prefix="" use --prefix "" when testing an
explictly empty prefix string in order to work with older versions
of Perl's Getopt::Long module.
Also add a paragraph on this workaround to the documentation of
git-svn itself.
Signed-off-by: Kyle J. McKay <mackyle@gmail.com> Acked-by: Johan Herland <johan@herland.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
ewah_bitmap.c: do not assume size_t and eword_t are the same size
When buffer_grow changes the size of the buffer using realloc,
it first computes and saves the rlw pointer's offset into the
buffer using (uint8_t *) math before the realloc but then
restores it using (eword_t *) math.
In order to do this it's necessary to convert the (uint8_t *)
offset into an (eword_t *) offset. It was doing this by
dividing by the sizeof(size_t). Unfortunately sizeof(size_t)
is not same as sizeof(eword_t) on all platforms.
This causes illegal memory accesses and other bad things to
happen when attempting to use bitmaps on those platforms.
Fix this by dividing by the sizeof(eword_t) instead which
will always be correct for all platforms.
Signed-off-by: Kyle J. McKay <mackyle@gmail.com> Acked-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-prompt.sh: don't put unsanitized branch names in $PS1
Both bash and zsh subject the value of PS1 to parameter expansion,
command substitution, and arithmetic expansion. Rather than include
the raw, unescaped branch name in PS1 when running in two- or
three-argument mode, construct PS1 to reference a variable that holds
the branch name. Because the shells do not recursively expand, this
avoids arbitrary code execution by specially-crafted branch names such
as '$(IFS=_;cmd=sudo_rm_-rf_/;$cmd)'.
Signed-off-by: Richard Hansen <rhansen@bbn.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jx/i18n:
i18n: mention "TRANSLATORS:" marker in Documentation/CodingGuidelines
i18n: only extract comments marked with "TRANSLATORS:"
i18n: remove obsolete comments for translators in diffstat generation
i18n: fix uncatchable comments for translators in date.c
Work around /bin/sh that does not like "return" at the top-level
of a file that is dot-sourced from inside a function definition.
* km/avoid-non-function-return-in-rebase:
Revert "rebase: fix run_specific_rebase's use of "return" on FreeBSD"
rebase: avoid non-function use of "return" on FreeBSD
* ep/shell-command-substitution:
t9362-mw-to-git-utf8.sh: use the $( ... ) construct for command substitution
t9360-mw-to-git-clone.sh: use the $( ... ) construct for command substitution
git-tag.sh: use the $( ... ) construct for command substitution
git-revert.sh: use the $( ... ) construct for command substitution
git-resolve.sh: use the $( ... ) construct for command substitution
git-repack.sh: use the $( ... ) construct for command substitution
git-merge.sh: use the $( ... ) construct for command substitution
git-ls-remote.sh: use the $( ... ) construct for command substitution
git-fetch.sh: use the $( ... ) construct for command substitution
git-commit.sh: use the $( ... ) construct for command substitution
git-clone.sh: use the $( ... ) construct for command substitution
git-checkout.sh: use the $( ... ) construct for command substitution
install-webdoc.sh: use the $( ... ) construct for command substitution
howto-index.sh: use the $( ... ) construct for command substitution
Commit 512477b (tests: use "env" to run commands with temporary env-var
settings) missed some variables in the remote-helpers test. Also
standardize these.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current logic makes it hard to see what gets put onto
the command line in which cases. Pulling out a helper
function lets us see that we have two sets of file data, and
the second set either uses the original name, or the "other"
renamed/copy name.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
run_external_diff: hoist common bits out of conditional
Whether we have diff_filespecs to give to the diff command
or not, we always are going to run the program and pass it
the pathname. Let's pull that duplicated part out of the
conditional to make it more obvious.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
This fflush was added in d5535ec (Use run_command() to spawn
external diff programs instead of fork/exec., 2007-10-19),
because flushing buffers before forking is a good habit.
But later, 7d0b18a (Add output flushing before fork(),
2008-08-04) added it to the generic run-command interface,
meaning that our flush here is redundant.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the external diff reports an error, we try to clean up
and die. However, we can make this process a bit simpler:
1. We do not need to bother freeing memory, since we are
about to exit. Nor do we need to clean up our
tempfiles, since the atexit() handler will do it for
us. So we can die as soon as we see the error.
3. We can just call die() rather than fprintf/exit. This
does technically change our exit code, but the exit
code of "1" is not meaningful here. In fact, it is
probably wrong, since "1" from diff usually means
"completed successfully, but there were differences".
And while we're there, we can mark the error message for
translation, and drop the full stop at the end to make it
more like our other messages.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
run_external_diff: use an argv_array for the environment
We currently use static buffers and a static array for
formatting the environment passed to the external diff.
There's nothing wrong in the code, but it is much easier to
verify that it is correct if we use a dynamic argv_array.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
run_external_diff: use an argv_array for the command line
We currently generate the command-line for the external
command using a fixed-length array of size 10. But if there
is a rename, we actually need 11 elements (10 items, plus a
NULL), and end up writing a random NULL onto the stack.
Rather than bump the limit, let's just use an argv_array, which
makes this sort of error impossible.
Noticed-by: Max L <infthi.inbox@gmail.com> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git 2.0: git svn: Set default --prefix='origin/' if --prefix is not given
git-svn by default puts its Subversion-tracking refs directly in
refs/remotes/*. This runs counter to Git's convention of using
refs/remotes/$remote/* for storing remote-tracking branches.
Furthermore, combining git-svn with regular git remotes run the risk of
clobbering refs under refs/remotes (e.g. if you have a git remote
called "tags" with a "v1" branch, it will overlap with the git-svn's
tracking branch for the "v1" tag from Subversion.
Even though the git-svn refs stored in refs/remotes/* are not "proper"
remote-tracking branches (since they are not covered by a proper git
remote's refspec), they clearly represent a similar concept, and would
benefit from following the same convention.
For example, if git-svn tracks Subversion branch "foo" at
refs/remotes/foo, and you create a local branch refs/heads/foo to add
some commits to be pushed back to Subversion (using "git svn dcommit),
then it is clearly unhelpful of Git to throw
warning: refname 'foo' is ambiguous.
every time you checkout, rebase, or otherwise interact with the branch.
The existing workaround for this is to supply the --prefix=quux/ to
git svn init/clone, so that git-svn's tracking branches end up in
refs/remotes/quux/* instead of refs/remotes/*. However, encouraging
users to specify --prefix to work around a design flaw in git-svn is
suboptimal, and not a long term solution to the problem. Instead,
git-svn should default to use a non-empty prefix that saves
unsuspecting users from the inconveniences described above.
This patch will only affect newly created git-svn setups, as the
--prefix option only applies to git svn init (and git svn clone).
Existing git-svn setups will continue with their existing (lack of)
prefix. Also, if anyone somehow prefers git-svn's old layout, they
can recreate that by explicitly passing an empty prefix (--prefix "")
on the git svn init/clone command line.
The patch changes the default value for --prefix from "" to "origin/",
updates the git-svn manual page, and fixes the fallout in the git-svn
testcases.
(Note that this patch might be easier to review using the --word-diff
and --word-diff-regex=. diff options.)
[ew: squashed description of <= 1.9 behavior into manpage]
Suggested-by: Thomas Ferris Nicolaisen <tfnico@gmail.com> Signed-off-by: Johan Herland <johan@herland.net> Signed-off-by: Eric Wong <normalperson@yhbt.net>
* fc/remote-helper-fixes:
remote-bzr: trivial test fix
remote-bzr: include authors field in pushed commits
remote-bzr: add support for older versions
remote-hg: always normalize paths
remote-helpers: allow all tests running from any dir