* jk/peel-ref:
upload-pack: load non-tip "want" objects from disk
upload-pack: make sure "want" objects are parsed
upload-pack: drop lookup-before-parse optimization
Merge branch 'mg/gpg-interface-using-status' into maint
Verification of signed tags were not done correctly when not in C
or en/US locale.
* mg/gpg-interface-using-status:
pretty: make %GK output the signing key for signed commits
pretty: parse the gpg status lines rather than the output
gpg_interface: allow to request status return
log-tree: rely upon the check in the gpg_interface
gpg-interface: check good signature in a reliable way
Merge branch 'bc/commit-complete-lines-given-via-m-option' into maint
'git commit -m "$msg"' used to add an extra newline even when
$msg already ended with one.
* bc/commit-complete-lines-given-via-m-option:
Documentation/git-commit.txt: rework the --cleanup section
git-commit: only append a newline to -m mesg if necessary
t7502: demonstrate breakage with a commit message with trailing newlines
t/t7502: compare entire commit message with what was expected
The "--match=<pattern>" option of "git describe", when used with
"--all" to allow refs that are not annotated tags to be used as a
base of description, did not restrict the output from the command to
those that match the given pattern.
* jc/describe:
describe: --match=<pattern> must limit the refs even when used with --all
An aliased command spawned from a bare repository that does not say
it is bare with "core.bare = yes" is treated as non-bare by mistake.
* jk/alias-in-bare:
setup: suppress implicit "." work-tree for bare repos
environment: add GIT_PREFIX to local_repo_env
cache.h: drop LOCAL_REPO_ENV_SIZE
"git archive" reports a failure when asked to create an archive out
of an empty tree. It would be more intuitive to give an empty
archive back in such a case.
* jk/empty-archive:
archive: handle commits with an empty tree
test-lib: factor out $GIT_UNZIP setup
* maint-1.8.1:
Start preparing for 1.8.1.6
git-tag(1): we tag HEAD by default
Fix revision walk for commits with the same dates
t2003: work around path mangling issue on Windows
pack-refs: add fully-peeled trait
pack-refs: write peeled entry for non-tags
use parse_object_or_die instead of die("bad object")
avoid segfaults on parse_object failure
entry: fix filter lookup
t2003: modernize style
name-hash.c: fix endless loop with core.ignorecase=true
Merge branch 'ap/maint-diff-rename-avoid-overlap' into maint-1.8.1
* ap/maint-diff-rename-avoid-overlap:
tests: make sure rename pretty print works
diff: prevent pprint_rename from underrunning input
diff: Fix rename pretty-print when suffix and prefix overlap
The <commit>|<object> argument is actually not explained anywhere
(except implicitly in the description of an unannotated tag). Write a
little explanation, in particular to cover the default.
Signed-off-by: Thomas Rast <trast@inf.ethz.ch> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge branch 'ap/maint-diff-rename-avoid-overlap' into maint
* ap/maint-diff-rename-avoid-overlap:
tests: make sure rename pretty print works
diff: prevent pprint_rename from underrunning input
diff: Fix rename pretty-print when suffix and prefix overlap
Merge branch 'tb/document-status-u-tradeoff' into maint
* tb/document-status-u-tradeoff:
status: advise to consider use of -u when read_directory takes too long
git status: document trade-offs in choosing parameters to the -u option
* da/downcase-u-in-usage:
contrib/mw-to-git/t/install-wiki.sh: use a lowercase "usage:" string
contrib/examples/git-remote.perl: use a lowercase "usage:" string
tests: use a lowercase "usage:" string
git-svn: use a lowercase "usage:" string
Documentation/user-manual.txt: use a lowercase "usage:" string
templates/hooks--update.sample: use a lowercase "usage:" string
contrib/hooks/setgitperms.perl: use a lowercase "usage:" string
contrib/examples: use a lowercase "usage:" string
contrib/fast-import/import-zips.py: use spaces instead of tabs
contrib/fast-import/import-zips.py: fix broken error message
contrib/fast-import: use a lowercase "usage:" string
contrib/credential: use a lowercase "usage:" string
git-cvsimport: use a lowercase "usage:" string
git-cvsimport: use a lowercase "usage:" string
git-cvsexportcommit: use a lowercase "usage:" string
git-archimport: use a lowercase "usage:" string
git-merge-one-file: use a lowercase "usage:" string
git-relink: use a lowercase "usage:" string
git-svn: use a lowercase "usage:" string
git-sh-setup: use a lowercase "usage:" string
After commit cbfd5e1c ("drop some obsolete "x = x" compiler warning
hacks", 21-03-2013) removed a gcc specific hack, older versions of
gcc now issue an "'contents' might be used uninitialized" warning.
In order to suppress the warning, we simply initialize the variable
to NULL in it's declaration.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit cbfd5e1c ("drop some obsolete "x = x" compiler warning hacks",
21-03-2013) removed a gcc hack that suppressed an "might be used
uninitialized" warning issued by older versions of gcc.
However, commit 3aa99df8 ('fast-import: clarify "inline" logic in
file_change_m', 21-03-2013) addresses an (almost) identical issue
(with very similar code), but includes additional code in it's
resolution. The solution used by this commit, unlike that used by
commit cbfd5e1c, also suppresses the -Wuninitialized warning on
older versions of gcc.
In order to suppress the warning (against the 'oe' symbol) in the
note_change_n() function, we adopt the same solution used by commit 3aa99df8.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk> Signed-off-by: Junio C Hamano <gitster@pobox.com>
When calculating whether there is a d/f conflict, the calculation of
whether both sides are directories generates an incorrect references
mask because it does not use the loop index to set the correct bit.
Fix this typo.
Signed-off-by: John Keeping <john@keeping.me.uk> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge branch 'jk/mailsplit-maildir-muttsort' into maint
Sort filenames read from the maildir/ in a way that is more likely
to sort messages in the order the writing MUA meant to, by sorting
numeric segment in numeric order and non-numeric segment in
alphabetical order.
* jk/mailsplit-maildir-muttsort:
mailsplit: sort maildir filenames more cleverly
Merge branch 'jk/utf-8-can-be-spelled-differently' into maint
Some platforms and users spell UTF-8 differently; retry with the
most official "UTF-8" when the system does not understand the
user-supplied encoding name that are the common alternative
spellings of UTF-8.
* jk/utf-8-can-be-spelled-differently:
utf8: accept alternate spellings of UTF-8
Merge branch 'jk/graph-c-expose-symbols-for-cgit' into maint
In the v1.8.0 era, we changed symbols that do not have to be global
to file scope static, but a few functions in graph.c were used by
CGit from sideways bypassing the entry points of the API the
in-tree users use.
* jk/graph-c-expose-symbols-for-cgit:
Revert "graph.c: mark private file-scope symbols as static"
* maint-1.8.1:
bundle: Add colons to list headings in "verify"
bundle: Fix "verify" output if history is complete
Documentation: filter-branch env-filter example
git-filter-branch.txt: clarify ident variables usage
git-compat-util.h: Provide missing netdb.h definitions
describe: Document --match pattern format
Documentation/githooks: Explain pre-rebase parameters
update-index: list supported idx versions and their features
diff-options: unconfuse description of --color
read-cache.c: use INDEX_FORMAT_{LB,UB} in verify_hdr()
index-format.txt: mention of v4 is missing in some places
Merge branch 'nd/doc-index-format' into maint-1.8.1
The v4 index format was not documented.
* nd/doc-index-format:
update-index: list supported idx versions and their features
read-cache.c: use INDEX_FORMAT_{LB,UB} in verify_hdr()
index-format.txt: mention of v4 is missing in some places
transport.c: help gcc 4.6.3 users by squelching compiler warning
To a human reader, it is quite obvious that cmp is assigned before
it is used, but gcc 4.6.3 that ships with Ubuntu 12.04 is among
those that do not get this right.
Logic in still_interesting function allows to stop the commits
traversing if the oldest processed commit is not older then the
youngest commit on the list to process and the list contains only
commits marked as not interesting ones. It can be premature when dealing
with a set of coequal commits. For example git rev-list A^! --not B
provides wrong answer if all commits in the range A..B had the same
commit time and there are more then 7 of them.
To fix this problem the relevant part of the logic in still_interesting
is changed to: the walk can be stopped if the oldest processed commit is
younger then the youngest commit on the list to processed.
Signed-off-by: Kacper Kornet <draenog@pld-linux.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
When asking Git to merge a tag (such as a signed tag or annotated tag),
it will always create a merge commit even if fast-forward was possible.
It's like having --no-ff present on the command line.
It's a difference from the default behavior described in git-merge.txt.
It should be documented as an exception of "FAST-FORWARD MERGE" section
and "--ff" option description.
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com> Reviewed-by: Yann Droneaud <ydroneaud@opteya.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before talking about notations such as optional [--option] enclosed
in brackets, state that the documents are in AsciiDoc and processed
into other formats.
diff.c: diff.renamelimit => diff.renameLimit in message
In the warning message printed when rename or unmodified copy
detection was skipped due to too many files, change "diff.renamelimit"
to "diff.renameLimit", in order to make it consistent with git
documentation, which consistently uses "diff.renameLimit".
Signed-off-by: Max Nanasy <max.nanasy@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
wt-status: fix possible use of uninitialized variable
In wt_status_print_change_data, we accept a change_type flag
that is meant to be either WT_STATUS_UPDATED or
WT_STATUS_CHANGED. We then switch() on this value to set
the local variable "status" for each case, but do not
provide a fallback "default" label to the switch statement.
As a result, the compiler realizes that "status" might be
unset, and complains with a warning. To silence this
warning, we use the "int status = status" trick. This is
correct with the current code, as all callers provide one of
the two expected change_type flags. However, it's also a
maintenance trap, as there is nothing to prevent future
callers from passing another flag, nor to document this
assumption.
Instead of using the "x = x" hack, let's handle the default
case in the switch() statement with a die("BUG"). That tells
the compiler and any readers of the code exactly what the
function's input assumptions are.
We could also convert the flag to an enum, which would
provide a compile-time check on the function input. However,
since these flags are part of a larger enum, that would make
the code unnecessarily complex (we would have to make a new
enum with just the two flags, and then convert it to the old
enum for passing to sub-functions).
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
fast-import: clarify "inline" logic in file_change_m
When we read a fast-import line like:
M 100644 :1 foo.c
we point the local object_entry variable "oe" to the object
named by the mark ":1". When the input uses the "inline"
construct, however, we do not have such an object_entry.
The current code is careful not to access "oe" in the inline
case, but we can make the assumption even more obvious (and
catch violations of it) by setting oe to NULL and adding a
comment. As a bonus, this also squelches an over-zealous gcc
-Wuninitialized warning, which means we can drop the "oe =
oe" initialization hack.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
run-command: always set failed_errno in start_command
When we fail to fork, we set the failed_errno variable to
the value of errno so it is not clobbered by later syscalls.
However, we do so in a conditional, and it is hard to see
later under what conditions the variable has a valid value.
Instead of setting it only when fork fails, let's just
always set it after forking. This is more obvious for human
readers (as we are no longer setting it as a side effect of
a strerror call), and it is more obvious to gcc, which no
longer generates a spurious -Wuninitialized warning. It also
happens to match what the WIN32 half of the #ifdef does.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
According to 47ec794, this initialization is meant to
squelch an erroneous uninitialized variable warning from gcc
4.0.1. That version is quite old at this point, and gcc 4.1
and up handle it fine, with one exception. There seems to be
a regression in gcc 4.6.3, which produces the warning;
however, gcc versions 4.4.7 and 4.7.2 do not.
Signed-off-by: Jeff King <peff@peff.net> Reviewed-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
In cases where the setting and access of a variable are
protected by the same conditional flag, older versions of
gcc would generate a "might be used unitialized" warning. We
silence the warning by initializing the variable to itself,
a hack that gcc recognizes.
Modern versions of gcc are smart enough to get this right,
going back to at least version 4.3.5. gcc 4.1 does get it
wrong in both cases, but is sufficiently old that we
probably don't need to care about it anymore.
Signed-off-by: Jeff King <peff@peff.net> Reviewed-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
index-pack: always zero-initialize object_entry list
Commit 38a4556 (index-pack: start learning to emulate
"verify-pack -v", 2011-06-03) added a "delta_depth" counter
to each "struct object_entry". Initially, all object entries
have their depth set to 0; in resolve_delta, we then set the
depth of each delta to "base + 1". Base entries never have
their depth touched, and remain at 0.
To ensure that all depths start at 0, that commit changed
calls to xmalloc the object_entry list into calls to
xcalloc. However, it forgot that we grow the list with
xrealloc later. These extra entries are used when we add an
object from elsewhere to complete a thin pack. If we add a
non-delta object, its depth value will just be uninitialized
heap data.
This patch fixes it by zero-initializing entries we add to
the objects list via the xrealloc.
Signed-off-by: Jeff King <peff@peff.net> Acked-by: Thomas Rast <trast@student.ethz.ch> Signed-off-by: Junio C Hamano <gitster@pobox.com>
MSYS bash considers the part "/g" in the sed expression "s/./=/g" as an
absolute path after an assignment, and mangles it to a C:/something
string. Do not attract bash's attention by avoiding the equals sign.
Signed-off-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Older versions of pack-refs did not write peel lines for
refs outside of refs/tags. This meant that on reading the
pack-refs file, we might set the REF_KNOWS_PEELED flag for
such a ref, even though we do not know anything about its
peeled value.
The previous commit updated the writer to always peel, no
matter what the ref is. That means that packed-refs files
written by newer versions of git are fine to be read by both
old and new versions of git. However, we still have the
problem of reading packed-refs files written by older
versions of git, or by other implementations which have not
yet learned the same trick.
The simplest fix would be to always unset the
REF_KNOWS_PEELED flag for refs outside of refs/tags that do
not have a peel line (if it has a peel line, we know it is
valid, but we cannot assume a missing peel line means
anything). But that loses an important optimization, as
upload-pack should not need to load the object pointed to by
refs/heads/foo to determine that it is not a tag.
Instead, we add a "fully-peeled" trait to the packed-refs
file. If it is set, we know that we can trust a missing peel
line to mean that a ref cannot be peeled. Otherwise, we fall
back to assuming nothing.
[commit message and tests by Jeff King <peff@peff.net>]
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t1507: Test that branchname@{upstream} is interpreted as branch
Syntax branchname@{upstream} should interpret its argument as a name of
a branch. Add the test to check that it doesn't try to interpret it as a
refname if the branch in question does not exist.
Signed-off-by: Kacper Kornet <draenog@pld-linux.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we pack an annotated tag ref, we write not only the
sha1 of the tag object along with the ref, but also the sha1
obtained by peeling the tag. This lets readers of the
pack-refs file know the peeled value without having to
actually load the object, speeding up upload-pack's ref
advertisement.
The writer marks a packed-refs file with peeled refs using
the "peeled" trait at the top of the file. When the reader
sees this trait, it knows that each ref is either followed
by its peeled value, or it is not an annotated tag.
However, there is a mismatch between the assumptions of the
reader and writer. The writer will only peel refs under
refs/tags, but the reader does not know this; it will assume
a ref without a peeled value must not be a tag object. Thus
an annotated tag object placed outside of the refs/tags
hierarchy will not have its peeled value printed by
upload-pack.
The simplest way to fix this is to start writing peel values
for all refs. This matches what the reader expects for both
new and old versions of git.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
use parse_object_or_die instead of die("bad object")
Some call-sites do:
o = parse_object(sha1);
if (!o)
die("bad object %s", some_name);
We can now handle that as a one-liner, and get more
consistent output.
In the third case of this patch, it looks like we are losing
information, as the existing message also outputs the sha1
hex; however, parse_object will already have written a more
specific complaint about the sha1, so there is no point in
repeating it here.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many call-sites of parse_object assume that they will get a
non-NULL return value; this is not the case if we encounter
an error while parsing the object.
This patch adds a wrapper function around parse_object that
handles dying automatically, and uses it anywhere we
immediately try to access the return value as a non-NULL
pointer (i.e., anywhere that we would currently segfault).
This wrapper may also be useful in other places. The most
obvious one is code like:
o = parse_object(sha1);
if (!o)
die(...);
However, these should not be mechanically converted to
parse_object_or_die, as the die message is sometimes
customized. Later patches can address these sites on a
case-by-case basis.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
rev-parse: clarify documentation of $name@{upstream} syntax
sha1_name: pass object name length to diagnose_invalid_sha1_path()
Makefile: keep LIB_H entries together and sorted
rev-parse: clarify documentation of $name@{upstream} syntax
"git rev-parse" interprets string in string@{upstream} as a name of
a branch not a ref. For example, refs/heads/master@{upstream} looks
for an upstream branch that is merged by git-pull to ref
refs/heads/refs/heads/master not to refs/heads/master.
However the documentation could mislead a user to believe that the
string is interpreted as ref.
Signed-off-by: Kacper Kornet <draenog@pld-linux.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
sha1_name: pass object name length to diagnose_invalid_sha1_path()
The only caller of diagnose_invalid_sha1_path() extracts a substring from
an object name by creating a NUL-terminated copy of the interesting part.
Add a length parameter to the function and thus avoid the need for an
allocation, thereby simplifying the code.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>
As a follow-up to 60d24dd25 (Makefile: fold XDIFF_H and VCSSVN_H into
LIB_H), let the unconditional additions to LIB_H form a single sorted
list. Also drop the duplicate entry for xdiff/xdiff.h, which was easy
to spot after sorting.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>
upload-pack: load non-tip "want" objects from disk
It is a long-time security feature that upload-pack will not
serve any "want" lines that do not correspond to the tip of
one of our refs. Traditionally, this was enforced by
checking the objects in the in-memory hash; they should have
been loaded and received the OUR_REF flag during the
advertisement.
The stateless-rpc mode, however, has a race condition here:
one process advertises, and another receives the want lines,
so the refs may have changed in the interim. To address
this, commit 051e400 added a new verification mode; if the
object is not OUR_REF, we set a "has_non_tip" flag, and then
later verify that the requested objects are reachable from
our current tips.
However, we still die immediately when the object is not in
our in-memory hash, and at this point we should only have
loaded our tip objects. So the check_non_tip code path does
not ever actually trigger, as any non-tip objects would
have already caused us to die.
We can fix that by using parse_object instead of
lookup_object, which will load the object from disk if it
has not already been loaded.
We still need to check that parse_object does not return
NULL, though, as it is possible we do not have the object
at all. A more appropriate error message would be "no such
object" rather than "not our ref"; however, we do not want
to leak information about what objects are or are not in
the object database, so we continue to use the same "not
our ref" message that would be produced by an unreachable
object.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
When upload-pack receives a "want" line from the client, it
adds it to an object array. We call lookup_object to find
the actual object, which will only check for objects already
in memory. This works because we are expecting to find
objects that we already loaded during the ref advertisement.
We use the resulting object structs for a variety of
purposes. Some of them care only about the object flags, but
others care about the type of the object (e.g.,
ok_to_give_up), or even feed them to the revision parser
(when --depth is used), which assumes that objects it
receives are fully parsed.
Once upon a time, this was OK; any object we loaded into
memory would also have been parsed. But since 435c833
(upload-pack: use peel_ref for ref advertisements,
2012-10-04), we try to avoid parsing objects during the ref
advertisement. This means that lookup_object may return an
object with a type of OBJ_NONE. The resulting mess depends
on the exact set of objects, but can include the revision
parser barfing, or the shallow code sending the wrong set of
objects.
This patch teaches upload-pack to parse each "want" object
as we receive it. We do not replace the lookup_object call
with parse_object, as the current code is careful not to let
just any object appear on a "want" line, but rather only one
we have previously advertised (whereas parse_object would
actually load any arbitrary object from disk).
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
upload-pack: drop lookup-before-parse optimization
When we receive a "have" line from the client, we want to
load the object pointed to by the sha1. However, we are
careful to do:
o = lookup_object(sha1);
if (!o || !o->parsed)
o = parse_object(sha1);
to avoid loading the object from disk if we have already
seen it. However, since ccdc603 (parse_object: try internal
cache before reading object db), parse_object already does
this optimization internally. We can just call parse_object
directly.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
index-pack: fix buffer overflow caused by translations
The translation of "completed with %d local objects" is put in a
48-byte buffer, which may be enough for English but not true for any
translations. Convert it to use strbuf (i.e. no hard limit on
translation length).
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
status: advise to consider use of -u when read_directory takes too long
Introduce advice.statusUoption to suggest considering use of -u to
strike different trade-off when it took more than 2 seconds to
enumerate untracked/ignored files.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git status: document trade-offs in choosing parameters to the -u option
In some repostories users experience that "git status" command takes
long time. The command spends some time searching the file system
for untracked files.
Explain the trade-off struck by the default choice of `normal` to
help users make an appropriate choice better, before talking about
the configuration variable.
When looking up the stream filter, write_entry() should be passing the
path of the file in the repository, not the path to which the content is
going to be written. This allows the file to be correctly looked up
against the .gitattributes files in the working tree.
This change makes the streaming case match the non-streaming case which
passes ce->name to convert_to_working_tree later in the same function.
The two tests added here test the different paths through write_entry
since the CRLF filter is a streaming filter but the user-defined smudge
filter is not streamed.
Signed-off-by: John Keeping <john@keeping.me.uk> Signed-off-by: Junio C Hamano <gitster@pobox.com>