prepare send-email for smoother change of --chain-reply-to default
Give a warning message when send-email uses chain-reply-to to thread the
messages because of the current default, not because the user explicitly
asked to, either from the command line or from the configuration.
This way, by the time 1.7.0 switches the default, everybody will be ready.
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The ARM SHA-1 implementation was removed by commit 30ae47b
(remove ARM and Mozilla SHA1 implementations, 2009-08-17). Prune
its directory from the list of object files to delete in 'make
clean'.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adds the option to specify the envelope sender as "auto" which
would pick the 'from' address. This is good because now we can specify
the address only in one place in $HOME/.gitconfig and change it easily.
[jc: added tests]
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
emit_line(): don't emit an empty <SET><RESET> followed by a newline
When emit_line() is called with an empty line (but non-zero length, as we
send line terminating LF or CRLF to the function), it used to emit
<SET><RESET> followed by a newline. Stop the wastefulness.
Ever since the initial implementation, "git am" had kept a dead code that
never triggered due to a typo in the variable name. Worse yet, the code,
if it weren't for the typo, would have attempted to add "[PATCH] " at the
beginning of the Subject: header when "git am" is run with its "-k"
option. However, because "git am -k" tells mailinfo to keep such prefix
when parsing the input, the "[PATCH] " added by this dead code would have
really been unnecessary duplicate.
Embarrassing is that we kept _maintaining_ the codepath without anybody
noticing for four years.
Add a notice that only certain functions can print color escape codes
We emulate color escape codes on Windows by overriding printf, fprintf,
and fputs. Warn developers that these are the only functions that can be
used to print them.
Signed-off-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
builtin-apply.c: pay attention to -p<n> when determining the name
The patch structure has def_name component that is used to validate the
sanity of a "diff --git" patch by checking pathnames that appear on the
patch header lines for consistency. The git_header_name() function is
used to compute this out of "diff --git a/... b/..." line, but the code
always stripped one level of prefix (i.e. "a/" and "b/"), without paying
attention to -p<n> option. Code in find_name() function that parses other
lines in the patch header (e.g. "--- a/..." and "+++ b/..." lines) however
did strip the correct number of leading paths prefixes, and the sanity
check between these computed values failed.
Teach git_header_name() to honor -p<n> option like find_name() function
does.
Found and reported by Steven J. Murdoch who also wrote tests.
There are some places in git where a long is passed to htonl/ntohl. llvm
doesn't support matching operands of different bitwidths intentionally.
This patch fixes the build with llvm-gcc (and clang) on x86_64.
Signed-off-by: Benjamin Kramer <benny.kra@googlemail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The fourth test of show-branch in t1200 test was failing but only
sometimes. It only failed when two commits created in an earlier
test had different timestamps. When they were created within the
same second, the actual output matched the expected output.
Fix this by using test_tick to force reliable timestamps and update
the expected output so it does not to depend on the commits made in
the same sacond.
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Documentation: update descriptions of revision options related to '--bisect'
In commit ad3f9a7 (Add '--bisect' revision machinery argument) the
'--bisect' option was added to easily pass bisection refs to commands
using the revision machinery.
This patch updates the documentation of the related options to describe
the new behavior.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The IPv6 support functions are loaded dynamically, to maintain backwards
compatibility with versions of Windows prior to XP, and fallback wrappers
are provided, implemented in terms of gethostbyname and gethostbyaddr.
Signed-off-by: Martin Storsjo <martin@martin.st> Acked-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Refactor winsock initialization into a separate function
The winsock library must be initialized. Since gethostbyname() is the
first function that calls into winsock, it was overridden to do the
initialization. This refactoring helps the next patch, where other
functions can be called earlier.
Signed-off-by: Martin Storsjo <martin@martin.st> Acked-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* bg/apply-doc:
Fix over-simplified documentation for 'git log -z'
apply: Use the term "working tree" consistently
apply: Format all options using back-quotes
apply: apply works outside a repository
Clarify and correct -z
* mm/maint-hint-failed-merge:
user-manual: Document that "git merge" doesn't like uncommited changes.
merge-recursive: point the user to commit when file would be overwritten.
* jc/log-stdin:
Add trivial tests for --stdin option to log family
Make --stdin option to "log" family read also pathspecs
setup_revisions(): do not call get_pathspec() too early
Teach --stdin option to "log" family
read_revision_from_stdin(): use strbuf
* mr/gitweb-snapshot:
t/gitweb-lib: Split HTTP response with non-GNU sed
gitweb: Smarter snapshot names
gitweb: Document current snapshot rules via new tests
t/gitweb-lib.sh: Split gitweb output into headers and body
gitweb: check given hash before trying to create snapshot
t/gitweb-lib: Split HTTP response with non-GNU sed
Recognizing \r in a regex is something GNU sed will do, but other sed
implementation's won't (e.g. BSD sed on OS X). Instead of two sed
invocations, use a single Perl script to split output into headers
and body.
Signed-off-by: Brian Gernhardt <brian@gernhardtsoftware.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* cc/replace:
Documentation: talk a little bit about GIT_NO_REPLACE_OBJECTS
Documentation: fix typos and spelling in replace documentation
replace: use a GIT_NO_REPLACE_OBJECTS env variable
* maint:
pack-objects: split implications of --all-progress from progress activation
instaweb: restart server if already running
prune-packed: only show progress when stderr is a tty
pack-objects: split implications of --all-progress from progress activation
Currently the --all-progress flag is used to use force progress display
during the writing object phase even if output goes to stdout which is
primarily the case during a push operation. This has the unfortunate
side effect of forcing progress display even if stderr is not a
terminal.
Let's introduce the --all-progress-implied argument which has the same
intent except for actually forcing the activation of any progress
display. With this, progress display will be automatically inhibited
whenever stderr is not a terminal, or full progress display will be
included otherwise. This should let people use 'git push' within a cron
job without filling their logs with useless percentage displays.
Signed-off-by: Nicolas Pitre <nico@fluxnic.net> Tested-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Running 'git instaweb' when an instaweb server is already running will
fail (at least when the port is the same) and overwrite the pid file
used to track the currently running server. This turns out to be
especially annoying when the user tries to stop the previously running
server with 'git instaweb --stop' and is instead greeted with an error
message because the pid file has been destroyed.
Instead of allowing a user to start two instaweb servers, stop the
currently running server first and then start the new one. This should
be fine because it was never really possible to start two instaweb
servers in the first place due to the pid file issue outlined above.
Signed-off-by: Stephen Boyd <bebarino@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Protect scripted Porcelains from GREP_OPTIONS insanity
If the user has exported the GREP_OPTIONS environment variable, the output
from "grep" and "egrep" in scripted Porcelains may be different from what
they expect. For example, we may want to count number of matching lines,
by "grep" piped to "wc -l", and GREP_OPTIONS=-C3 will break such use.
The approach taken by this change to address this issue is to protect only
our own use of grep/egrep. Because we do not unset it at the beginning of
our scripts, hook scripts run from the scripted Porcelains are exposed to
the same insanity this environment variable causes when grep/egrep is used
to implement logic (e.g. "grep | wc -l"), and it is entirely up to the
hook scripts to protect themselves.
On the other hand, applypatch-msg hook may want to show offending words in
the proposed commit log message using grep to the end user, and the user
might want to set GREP_OPTIONS=--color to paint the match more visibly.
The approach to protect only our own use without unsetting the environment
variable globally will allow this use case.
Use a case statement instead of calling grep to find out if the editor's
name contains the string "vim". Remove the check for emacs, as this
branch did the same as the default one anyway.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t4014-format-patch: do not assume 'test' is available as non-builtin
One test case used 'xargs test', which assumes that 'test' is available
as external program. At least on MinGW it is not.
Moreover, 'git format-patch' was invoked in a pipeline, but not as the
last command. Rewrite the test case to catch breakage in 'git format-patch'
as well.
Signed-off-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix over-simplified documentation for 'git log -z'
In commit 64485b4a, the documentation for 'git log -z' was
simplified too much. The -z option actually changes the behavior
of 'git log' in two ways: commits will be ended with a NUL
instead of a LF (correctly documented) and the --raw and
--numstat will have NUL as field terminators (omitted in
the documentation for 'git log').
Signed-off-by: Björn Gustavsson <bgustavsson@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* bg/fetch-multi:
Re-implement 'git remote update' using 'git fetch'
builtin-fetch: add --dry-run option
builtin-fetch: add --prune option
teach warn_dangling_symref to take a FILE argument
remote: refactor some logic into get_stale_heads()
Add missing test for 'git remote update --prune'
Add the configuration option skipFetchAll
Teach the --multiple option to 'git fetch'
Teach the --all option to 'git fetch'
bisect: simplify calling visualizer using '--bisect' option
In commit ad3f9a7 (Add '--bisect' revision machinery argument) the
'--bisect' option was added to easily pass bisection refs to
commands using the revision machinery.
So it is now shorter and safer to use the new '--bisect' revision
machinery option, than to compute the refs that we must pass.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Disable CURLOPT_NOBODY before enabling CURLOPT_PUT and CURLOPT_POST
This works around a bug in curl versions up to 7.19.4, where disabling the
CURLOPT_NOBODY option sets the internal state incorrectly considering that
CURLOPT_PUT was enabled earlier.
The bug is discussed at http://curl.haxx.se/bug/view.cgi?id=2727981 and is
corrected in the latest version of curl in CVS.
This bug usually has no impact on git, but may surface if using multi-pass
authentication methods.
Signed-off-by: Martin Storsjo <martin@martin.st> Signed-off-by: Tay Ray Chuan <rctay89@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
cvsserver doc: database generally can not be reproduced consistently
A regenerated git-cvsserver database is at risk of having different
CVS revision numbers from an incrementally updated database. Mention
this in the the documentation, and remove an erroneous statement
to the contrary.
Signed-off-by: Matthew Ogilvie <mmogilvi_git@miniinfo.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git svn: strip leading path when making empty dirs
Since unhandled.log stores paths relative to the repository
root, we need to strip out leading path components if the
directories we're tracking are not the repository root.
Reported-by: Björn Steinbrink Signed-off-by: Eric Wong <normalperson@yhbt.net>
* mm/config-pathname-tilde-expand:
Documentation: avoid xmlto input error
expand_user_path: expand ~ to $HOME, not to the actual homedir.
Expand ~ and ~user in core.excludesfile, commit.template
* jk/maint-break-rename-reduce-memory:
diffcore-rename: reduce memory footprint by freeing blob data early
diffcore-break: save cnt_data for other phases
diffcore-break: free filespec data as we go
strbuf_add_wrapped_text(): factor out strbuf_add_indented_text()
Add a new helper function, strbuf_add_indented_text(), to indent text
without a width limit, and call it from strbuf_add_wrapped_text(). It
respects both indent (applied to the first line) and indent2 (applied to
the rest of the lines); indent2 was ignored by the indent-only path of
strbuf_add_wrapped_text() before the patch.
Two simple test cases are added, one exercising strbuf_add_wrapped_text()
and the other strbuf_add_indented_text().
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>
grep: unset GREP_OPTIONS before spawning external grep
While we're at it, also unset GREP_COLOR and GREP_COLORS in case colouring
is not enabled, to be on the safe side. The presence of these variables
alone is not sufficient to trigger coloured output with GNU grep, but
other implementations may behave differently.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the Table of Contents, there is a notable inconsistency:
first there is "GIT Glossary", followed by "Git Quick Reference"
on the very next line.
Running "grep -c" on user-manual.txt, I find 780 occurrrences of
"git", 37 occurrences of "Git", and 9 occurrences of "GIT".
In general, "git" is the preferred spelling, except at the
beginning of a sentence.
Therefore, change "GIT Glossary" to "Git Glossary" for consistency
with the rest of the document.
Looking at the other eight occurrences of "GIT" I found one other
occurrence that should be changed:
* The mention of "StGIT". Looking at the web pages for "Stacked Git"
at http://www.procode.org/stgit, I only saw the spelling "StGit",
except in http://wiki.procode.org/cgi-bin/wiki.cgi/StGIT_Tutorial,
but that page was last updated in 2006.
The other seven occurrences should not be changed:
* Three occurrences were in the output of 'git show-branch' run
on the git.git repository.
* One occurrence was in the output of 'git cat-file'.
* One occurrence was as part of the file name "GIT-VERSION-GEN".
* Two occurrences were in comments in scripts quoted in a description
of Tony Luck's workflow.
Signed-off-by: Björn Gustavsson <bgustavsson@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The usage messages for some commands (such as 'git diff-tree')
are truncated because they don't fit in a fixed buffer of
1024 bytes.
It would be tempting to eliminate the buffer and the problem once
and for all by doing the output in three steps, but doing so could
(according to commit d048a96e) increase the likelyhood of messing
up the display.
So we just increase the size of the buffer.
Signed-off-by: Björn Gustavsson <bgustavsson@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
user-manual: Document that "git merge" doesn't like uncommited changes.
We explain the user why uncommited changes can be problematic with merge,
and point to "commit" and "stash" for the solution. While talking about
commited Vs uncommited changes, we also make it clear that the result of
a merge is normally commited.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
merge-recursive: point the user to commit when file would be overwritten.
The commit-before-pull is well accepted in the DVCS community, but is
confusing some new users. This should get them back in the right way when
the problem occurs.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation for 'git apply' uses both the terms
"work tree" and "working tree". Since the glossary uses
the term "working tree", change all occurrences of
"work tree" to "working tree".
Signed-off-by: Björn Gustavsson <bgustavsson@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation for 'git apply' talks about applying a
patch/diff to the index and to the working tree, which seems
to imply that it will not work outside a git repository.
Actually 'git patch' works outside a repository (which can
be useful especially for applying binary or rename patches that
the standard "patch" utility cannot handle), so the documentation
should mention it.
Thanks to Junio for suggesting better wording.
Signed-off-by: Björn Gustavsson <bgustavsson@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The description for -z is too vague and general for the
apply, diff*, and log commands.
Change the description of -z for 'git log' to note that
commits will be separated by NULs.
Change the description of -z for 'git diff*' and 'git apply'
to note that it applies to the --numstat option, and for
'git diff*' also for --raw option.
Also correct the description of the "munging" of pathanmes that
takes place in the absence of -z for the 'git diff*' and
'git apply' commands, namely that apart from the characters mentioned,
double quotes will also be escaped and that the pathname will be
enclosed in double quotes if any characters are escaped.
Signed-off-by: Björn Gustavsson <bgustavsson@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Do not write literal "~/" or "~user" but use "{tilde}/" and "{tilde}user";
otherwise the text between them gets enclosed in
"<subscript>...</subscript>".
* 'jh/notes' (early part):
Add selftests verifying concatenation of multiple notes for the same commit
Refactor notes code to concatenate multiple notes annotating the same object
Add selftests verifying that we can parse notes trees with various fanouts
Teach the notes lookup code to parse notes trees with various fanout schemes
Teach notes code to free its internal data structures on request
Add '%N'-format for pretty-printing commit notes
Add flags to get_commit_notes() to control the format of the note string
t3302-notes-index-expensive: Speed up create_repo()
fast-import: Add support for importing commit notes
Teach "-m <msg>" and "-F <file>" to "git notes edit"
Add an expensive test for git-notes
Speed up git notes lookup
Add a script to edit/inspect notes
Introduce commit notes
* sp/smart-http: (37 commits)
http-backend: Let gcc check the format of more printf-type functions.
http-backend: Fix access beyond end of string.
http-backend: Fix bad treatment of uintmax_t in Content-Length
t5551-http-fetch: Work around broken Accept header in libcurl
t5551-http-fetch: Work around some libcurl versions
http-backend: Protect GIT_PROJECT_ROOT from /../ requests
Git-aware CGI to provide dumb HTTP transport
http-backend: Test configuration options
http-backend: Use http.getanyfile to disable dumb HTTP serving
test smart http fetch and push
http tests: use /dumb/ URL prefix
set httpd port before sourcing lib-httpd
t5540-http-push: remove redundant fetches
Smart HTTP fetch: gzip requests
Smart fetch over HTTP: client side
Smart push over HTTP: client side
Discover refs via smart HTTP server when available
http-backend: more explict LocationMatch
http-backend: add example for gitweb on same URL
http-backend: use mod_alias instead of mod_rewrite
...
* jn/editor-pager:
Provide a build time default-pager setting
Provide a build time default-editor setting
am -i, git-svn: use "git var GIT_PAGER"
add -i, send-email, svn, p4, etc: use "git var GIT_EDITOR"
Teach git var about GIT_PAGER
Teach git var about GIT_EDITOR
Suppress warnings from "git var -l"
Do not use VISUAL editor on dumb terminals
Handle more shell metacharacters in editor names
* bg/format-patch-doc-update:
format-patch: Add "--no-stat" as a synonym for "-p"
format-patch documentation: Fix formatting
format-patch documentation: Remove diff options that are not useful
format-patch: Always generate a patch
* jn/gitweb-log-history:
gitweb: Make 'history' view (re)use git_log_generic()
gitweb: Refactor common parts of 'log' and 'shortlog' views
gitweb: Refactor 'log' action generation, adding git_log_body()
* jn/help-everywhere: (23 commits)
diff --no-index: make the usage string less scary
merge-{recursive,subtree}: use usagef() to print usage
Introduce usagef() that takes a printf-style format
Let 'git <command> -h' show usage without a git dir
Show usage string for 'git http-push -h'
Let 'git http-fetch -h' show usage outside any git repository
Show usage string for 'git stripspace -h'
Show usage string for 'git unpack-file -h'
Show usage string for 'git show-index -h'
Show usage string for 'git rev-parse -h'
Show usage string for 'git merge-one-file -h'
Show usage string for 'git mailsplit -h'
Show usage string for 'git imap-send -h'
Show usage string for 'git get-tar-commit-id -h'
Show usage string for 'git fast-import -h'
Show usage string for 'git check-ref-format -h'
http-fetch: add missing initialization of argv0_path
Show usage string for 'git show-ref -h'
Show usage string for 'git merge-ours -h'
Show usage string for 'git commit-tree -h'
...
* jp/fetch-cull-many-refs:
remote: fix use-after-free error detected by glibc in ref_remove_duplicates
fetch: Speed up fetch of large numbers of refs
remote: Make ref_remove_duplicates faster for large numbers of refs