In addition to "cc: <a@dd.re.ss> # cruft", "cc: a@dd.re.ss # cruft"
was taught to "git send-email" as a valid way to tell it that it
needs to also send a carbon copy to <a@dd.re.ss> in the trailer
section.
* mm/send-email-cc-cruft:
send-email: don't use Mail::Address, even if available
send-email: fix garbage removal after address
We run `git rev-parse` though the shell, and quote its
argument only with single-quotes. This prevents most
metacharacters from being a problem, but misses the obvious
case when $name itself has single-quotes in it. We can fix
this by applying the usual shell-quoting formula.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The git-cvsserver script is old and largely unmaintained
these days. But git-shell allows untrusted users to run it
out of the box, significantly increasing its attack surface.
Let's drop it from git-shell's list of internal handlers so
that it cannot be run by default. This is not backwards
compatible. But given the age and development activity on
CVS-related parts of Git, this is likely to impact very few
users, while helping many more (i.e., anybody who runs
git-shell and had no intention of supporting CVS).
There's no configuration mechanism in git-shell for us to
add a boolean and flip it to "off". But there is a mechanism
for adding custom commands, and adding CVS support here is
fairly trivial. Let's document it to give guidance to
anybody who really is still running cvsserver.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge branch 'rs/archive-excluded-directory' into maint
"git archive" did not work well with pathspecs and the
export-ignore attribute.
We may want to resurrect the "we don't archive an empty directory"
bonus patch, but I do not mind merging the above early to 'next'
and leave it as a separate follow-up enhancement.
cf. <20170820090629.tumvqwzkromcykjf@sigill.intra.peff.net>
* rs/archive-excluded-directory:
archive: don't queue excluded directories
archive: factor out helper functions for handling attributes
t5001: add tests for export-ignore attributes and exclude pathspecs
Killing "git merge --edit" before the editor returns control left
the repository in a state with MERGE_MSG but without MERGE_HEAD,
which incorrectly tells the subsequent "git commit" that there was
a squash merge in progress. This has been fixed.
* mg/killed-merge:
merge: save merge state earlier
merge: split write_merge_state in two
merge: clarify call chain
Documentation/git-merge: explain --continue
"git apply" that is used as a better "patch -p1" failed to apply a
taken from a file with CRLF line endings to a file with CRLF line
endings. The root cause was because it misused convert_to_git()
that tried to do "safe-crlf" processing by looking at the index
entry at the same path, which is a nonsense---in that mode, "apply"
is not working on the data in (or derived from) the index at all.
This has been fixed.
* tb/apply-with-crlf:
apply: file commited with CRLF should roundtrip diff and apply
convert: add SAFE_CRLF_KEEP_CRLF
Merge branch 'cc/subprocess-handshake-missing-capabilities' into maint
When handshake with a subprocess filter notices that the process
asked for an unknown capability, Git did not report what program
the offending subprocess was running. This has been corrected.
We may want a follow-up fix to tighten the error checking, though.
* cc/subprocess-handshake-missing-capabilities:
sub-process: print the cmd when a capability is unsupported
"git svn" used with "--localtime" option did not compute the tz
offset for the timestamp in question and instead always used the
current time, which has been corrected.
* ur/svn-local-zone:
git svn fetch: Create correct commit timestamp when using --localtime
"git am -s" has been taught that some input may end with a trailer
block that is not Signed-off-by: and it should refrain from adding
an extra blank line before adding a new sign-off in such a case.
* pw/am-signoff:
am: fix signoff when other trailers are present
Merge branch 'ma/pager-per-subcommand-action' into maint
The "tag.pager" configuration variable was useless for those who
actually create tag objects, as it interfered with the use of an
editor. A new mechanism has been introduced for commands to enable
pager depending on what operation is being carried out to fix this,
and then "git tag -l" is made to run pager by default.
If this works out OK, I think there are low-hanging fruits in
other commands like "git branch" that outputs long list in one mode
while taking input in another.
* ma/pager-per-subcommand-action:
git.c: ignore pager.* when launching builtin as dashed external
tag: change default of `pager.tag` to "on"
tag: respect `pager.tag` in list-mode only
t7006: add tests for how git tag paginates
git.c: provide setup_auto_pager()
git.c: let builtins opt for handling `pager.foo` themselves
builtin.h: take over documentation from api-builtin.txt
"git log --tag=no-such-tag" showed log starting from HEAD, which
has been fixed---it now shows nothing.
* jk/rev-list-empty-input:
revision: do not fallback to default when rev_input_given is set
rev-list: don't show usage when we see empty ref patterns
revision: add rev_input_given flag
t6018: flesh out empty input/output rev-list tests
Merge branch 'st/lib-gpg-kill-stray-agent' into maint
Some versions of GnuPG fails to kill gpg-agent it auto-spawned
and such a left-over agent can interfere with a test. Work it
around by attempting to kill one before starting a new test.
* st/lib-gpg-kill-stray-agent:
t: lib-gpg: flush gpg agent on startup
Using for_each_ref_in() with a full refname has always been
a questionable practice, but it became an error with b9c8e7f2fb (prefix_ref_iterator: don't trim too much,
2017-05-22), making "git rev-parse --bisect" pretty reliably
show a BUG.
Commit 03df567fbf (for_each_bisect_ref(): don't trim
refnames, 2017-06-18) fixed this case for revision.c, but
rev-parse handles this option on its own. We can use the
same solution here (and piggy-back on its test).
Signed-off-by: Jeff King <peff@peff.net> Acked-by: Michael Haggerty <mhagger@alum.mit.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
send-email: don't use Mail::Address, even if available
Using Mail::Address made sense when we didn't have a proper parser. We
now have a reasonable address parser, and using Mail::Address
_if available_ causes much more trouble than it gives benefits:
* Developers typically test one version, not both.
* Users may not be aware that installing Mail::Address will change the
behavior. They may complain about the behavior in one case without
knowing that Mail::Address is involved.
* Having this optional Mail::Address makes it tempting to anwser "please
install Mail::Address" to users instead of fixing our own code. We've
reached the stage where bugs in our parser should be fixed, not worked
around.
Signed-off-by: Matthieu Moy <git@matthieu-moy.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is a followup over 9d33439 (send-email: only allow one address
per body tag, 2017-02-20). The first iteration did allow writting
Cc: <foo@example.com> # garbage
but did so by matching the regex ([^>]*>?), i.e. stop after the first
instance of '>'. However, it did not properly deal with
Cc: foo@example.com # garbage
Fix this using a new function strip_garbage_one_address, which does
essentially what the old ([^>]*>?) was doing, but dealing with more
corner-cases. Since we've allowed
Cc: "Foo # Bar" <foobar@example.com>
in previous versions, it makes sense to continue allowing it (but we
still remove any garbage after it). OTOH, when an address is given
without quoting, we just take the first word and ignore everything
after.
Signed-off-by: Matthieu Moy <git@matthieu-moy.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jt/subprocess-handshake:
sub-process: refactor handshake to common function
Documentation: migrate sub-process docs to header
convert: add "status=delayed" to filter process protocol
convert: refactor capabilities negotiation
convert: move multiple file filter error handling to separate function
convert: put the flags field before the flag itself for consistent style
t0021: write "OUT <size>" only on success
t0021: make debug log file name configurable
t0021: keep filter log files on comparison
Merge branch 'dl/credential-cache-socket-in-xdg-cache' into maint
A recently added test for the "credential-cache" helper revealed
that EOF detection done around the time the connection to the cache
daemon is torn down were flaky. This was fixed by reacting to
ECONNRESET and behaving as if we got an EOF.
* dl/credential-cache-socket-in-xdg-cache:
credential-cache: interpret an ECONNRESET as an EOF
When a directory is not readable, "gitweb" fails to build the
project list. Work this around by skipping such a directory.
It might end up hiding a problem under the rug and a better
solution might be to loudly complain to the administrator pointing
out the problematic directory, but this will at least make it
"work".
Numerous bugs in walking of reflogs via "log -g" and friends have
been fixed.
* jk/reflog-walk:
reflog-walk: apply --since/--until to reflog dates
reflog-walk: stop using fake parents
rev-list: check reflog_info before showing usage
get_revision_1(): replace do-while with an early return
log: do not free parents when walking reflog
log: clarify comment about reflog cycles
revision: disallow reflog walking with revs->limited
t1414: document some reflog-walk oddities
Merge branch 'jc/http-sslkey-and-ssl-cert-are-paths' into maint
The http.{sslkey,sslCert} configuration variables are to be
interpreted as a pathname that honors "~[username]/" prefix, but
weren't, which has been fixed.
* jc/http-sslkey-and-ssl-cert-are-paths:
http.c: http.sslcert and http.sslkey are both pathnames
"%C(color name)" in the pretty print format always produced ANSI
color escape codes, which was an early design mistake. They now
honor the configuration (e.g. "color.ui = never") and also tty-ness
of the output medium.
* jk/ref-filter-colors:
ref-filter: consult want_color() before emitting colors
pretty: respect color settings for %C placeholders
rev-list: pass diffopt->use_colors through to pretty-print
for-each-ref: load config earlier
color: check color.ui in git_default_config()
ref-filter: pass ref_format struct to atom parsers
ref-filter: factor out the parsing of sorting atoms
ref-filter: make parse_ref_filter_atom a private function
ref-filter: provide a function for parsing sort options
ref-filter: move need_color_reset_at_eol into ref_format
ref-filter: abstract ref format into its own struct
ref-filter: simplify automatic color reset
t: use test_decode_color rather than literal ANSI codes
docs/for-each-ref: update pointer to color syntax
check return value of verify_ref_format()
Merge branch 'js/git-gui-msgfmt-on-windows' into maint
Because recent Git for Windows do come with a real msgfmt, the
build procedure for git-gui has been updated to use it instead of a
hand-rolled substitute.
* js/git-gui-msgfmt-on-windows:
git-gui (MinGW): make use of MSys2's msgfmt
git gui: allow for a long recentrepo list
git gui: de-dup selected repo from recentrepo history
git gui: cope with duplicates in _get_recentrepo
git-gui: remove duplicate entries from .gitconfig's gui.recentrepo
vcs-svn: move remaining repo_tree functions to fast_export.h
These used to be for manipulating the in-memory repo_tree structure,
but nowadays they are convenience wrappers to handle a few git-vs-svn
mismatches:
1. Git does not track empty directories but Subversion does. When
looking up a path in git that Subversion thinks exists and finding
nothing, we can safely assume that the path represents a
directory. This is needed when a later Subversion revision
modifies that directory.
2. Subversion allows deleting a file by copying. In Git fast-import
we have to handle that more explicitly as a deletion.
These are details of the tool's interaction with git fast-import.
Move them to fast_export.c, where other such details are handled.
This way the function names do not start with a repo_ prefix that
would clash with the repository object introduced in
v2.14.0-rc0~38^2~16 (repository: introduce the repository object,
2017-06-22) or an svn_ prefix that would clash with libsvn (in case
someone wants to link this code with libsvn some day).
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since v1.7.10-rc0~118^2~4^2~4^2~3 (vcs-svn: pass paths through to
fast-import, 2010-12-13) this is an alias for fast_export_delete.
Remove the unnecessary layer of indirection.
No functional change intended.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the rest of Git, these modes are spelled as S_IFDIR,
S_IFREG | 0644, S_IFREG | 0755, and S_IFLNK. Use the same constants
in svn-fe for simplicity and consistency.
No functional change intended.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Doc: clarify that pack-objects makes packs, plural
The documentation for pack-objects describes that it creates "a packed
archive of objects", which is confusing because it may create multiple
packs if --max-pack-size is set. Update the documentation to clarify
this, and explaining in which cases such a feature would be useful.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the `git merge` process is killed while waiting for the editor to
finish, the merge state is lost but the prepared merge msg and tree is kept.
So, a subsequent `git commit` creates a squashed merge even when the
user asked for proper merge commit originally.
Demonstrate the problem with a test crafted after the in t7502. The test
requires EXECKEEPSPID (thus does not run under MINGW).
Save the merge state earlier (in the non-squash case) so that it does
not get lost. This makes the test pass.
Reported-by: hIpPy <hippy2981@gmail.com> Signed-off-by: Michael J Gruber <git@grubix.eu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
write_merge_state() writes out the merge heads, mode, and msg. But we
may want to write out heads, mode without the msg. So, split out heads
(+mode) into a separate function write_merge_heads() that is called by
write_merge_state().
No funtional change so far, except when these non-atomic writes are
interrupted: we write heads-mode-msg now when we used to write
heads-msg-mode.
Signed-off-by: Michael J Gruber <git@grubix.eu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
prepare_to_commit() cannot be reached in the non-squash case:
It is called by merge_trivial() and finish_automerge() only, but the
calls to the latter are somewhat hard to track:
If option_commit is not set, the code in cmd_merge() uses a fake
conflict return code (ret=1) to avoid writing the tree, which also
avoids setting automerge_was_ok (just as in the proper ret==1 case), so
that finish_automerge() is not called.
To ensure that no code change breaks that assumption, safe-guard
prepare_to_commit() by a BUG() statement.
Suggested-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Michael J Gruber <git@grubix.eu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
There were several functions in the Subversion code that started with
"repo_". This namespace is also used by the Git struct repository code.
Rename these functions to start with "svn_repo" to avoid any future
conflicts.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Subversion code had prototypes for several functions which were not
ever defined or used. These functions all had names starting with
"repo_", some of which conflict with those in repository.h. To avoid
the conflict, remove those unused prototypes.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
apply: file commited with CRLF should roundtrip diff and apply
When a file had been commited with CRLF but now .gitattributes say
"* text=auto" (or core.autocrlf is true), the following does not
roundtrip, `git apply` fails:
Before applying the patch, the file from working tree is converted
into the index format (clean filter, CRLF conversion, ...). Here,
when commited with CRLF, the line endings should not be converted.
Note that `git apply --index` or `git apply --cache` doesn't call
convert_to_git() because the source material is already in index
format.
Analyze the patch if there is a) any context line with CRLF, or b)
if any line with CRLF is to be removed. In this case the patch file
`patch` has mixed line endings, for a) it looks like this:
If `git apply` detects that the patch itself has CRLF, (look at the
line " a\r" or "-a\r" above), the new flag crlf_in_old is set in
"struct patch" and two things will happen:
- read_old_data() will not convert CRLF into LF by calling
convert_to_git(..., SAFE_CRLF_KEEP_CRLF);
- The WS_CR_AT_EOL bit is set in the "white space rule",
CRLF are no longer treated as white space.
While at there, make it clear that read_old_data() in apply.c knows
what it wants convert_to_git() to do with respect to CRLF. In fact,
this codepath is about applying a patch to a file in the filesystem,
which may not exist in the index, or may exist but may not match
what is recorded in the index, or in the extreme case, we may not
even be in a Git repository. If convert_to_git() peeked at the
index while doing its work, it *would* be a bug.
Pass NULL instead of &the_index to convert_to_git() to make sure we
catch future bugs to clarify this.
Update the test in t4124: split one test case into 3:
- Detect the " a\r" line in the patch
- Detect the "-a\r" line in the patch
- Use LF in repo and CLRF in the worktree.
Reported-by: Anthony Sottile <asottile@umich.edu> Signed-off-by: Torsten Bögershausen <tboegi@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>