Merge branch 'tb/ref-filter-empty-modifier' into maint
In the "--format=..." option of the "git for-each-ref" command (and
its friends, i.e. the listing mode of "git branch/tag"), "%(atom:)"
(e.g. "%(refname:)", "%(body:)" used to error out. Instead, treat
them as if the colon and an empty string that follows it were not
there.
* tb/ref-filter-empty-modifier:
ref-filter.c: pass empty-string as NULL to atom parsers
Fixes for a handful memory access issues identified by valgrind.
* tg/memfixes:
sub-process: use child_process.args instead of child_process.argv
http-push: fix construction of hex value from path
path.c: fix uninitialized memory access
Merge branch 'rs/mailinfo-qp-decode-fix' into maint
"git mailinfo" was loose in decoding quoted printable and produced
garbage when the two letters after the equal sign are not
hexadecimal. This has been fixed.
Merge branch 'jk/describe-omit-some-refs' into maint
"git describe --match" learned to take multiple patterns in v2.13
series, but the feature ignored the patterns after the first one
and did not work at all. This has been fixed.
* jk/describe-omit-some-refs:
describe: fix matching to actually match all patterns
Merge branch 'aw/gc-lockfile-fscanf-fix' into maint
"git gc" tries to avoid running two instances at the same time by
reading and writing pid/host from and to a lock file; it used to
use an incorrect fscanf() format when reading, which has been
corrected.
* aw/gc-lockfile-fscanf-fix:
gc: call fscanf() with %<len>s, not %<len>c, when reading hostname
Merge branch 'rk/commit-tree-make-F-verbatim' into maint
Unlike "git commit-tree < file", "git commit-tree -F file" did not
pass the contents of the file verbatim and instead completed an
incomplete line at the end, if exists. The latter has been updated
to match the behaviour of the former.
* rk/commit-tree-make-F-verbatim:
commit-tree: do not complete line in -F input
In addition to "cc: <a@dd.re.ss> # cruft", "cc: a@dd.re.ss # cruft"
was taught to "git send-email" as a valid way to tell it that it
needs to also send a carbon copy to <a@dd.re.ss> in the trailer
section.
* mm/send-email-cc-cruft:
send-email: don't use Mail::Address, even if available
send-email: fix garbage removal after address
ref-filter.c: pass empty-string as NULL to atom parsers
Peff points out that different atom parsers handle the empty
"sub-argument" list differently. An example of this is the format
"%(refname:)".
Since callers often use `string_list_split` (which splits the empty
string with any delimiter as a 1-ary string_list containing the empty
string), this makes handling empty sub-argument strings non-ergonomic.
Let's fix this by declaring that atom parser implementations must
not care about distinguishing between the empty string "%(refname:)"
and no sub-arguments "%(refname)". Current code aborts, either with
"unrecognised arg" (e.g. "refname:") or "does not take args"
(e.g. "body:") as an error message.
Signed-off-by: Taylor Blau <me@ttaylorr.com> Reviewed-by: Jeff King <peff@peff.net> Reviewed-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
sub-process: use child_process.args instead of child_process.argv
Currently the argv is only allocated on the stack, and then assigned to
process->argv. When the start_subprocess function goes out of scope,
the local argv variable is eliminated from the stack, but the pointer is
still kept around in process->argv.
Much later when we try to access the same process->argv in
finish_command, this leads us to access a memory location that no longer
contains what we want. As argv0 is only used for printing errors, this
is not easily noticed in normal git operations. However when running
t0021-conversion.sh through valgrind, valgrind rightfully complains:
==21024== Invalid read of size 8
==21024== at 0x2ACF64: finish_command (run-command.c:869)
==21024== by 0x2D6B18: subprocess_exit_handler (sub-process.c:72)
==21024== by 0x2AB41E: cleanup_children (run-command.c:45)
==21024== by 0x2AB526: cleanup_children_on_exit (run-command.c:81)
==21024== by 0x54AD487: __run_exit_handlers (in /usr/lib/libc-2.26.so)
==21024== by 0x54AD4D9: exit (in /usr/lib/libc-2.26.so)
==21024== by 0x11A9EF: handle_builtin (git.c:550)
==21024== by 0x11ABCC: run_argv (git.c:602)
==21024== by 0x11AD8E: cmd_main (git.c:679)
==21024== by 0x1BF125: main (common-main.c:43)
==21024== Address 0x1ffeffec00 is on thread 1's stack
==21024== 1504 bytes below stack pointer
==21024==
These days, the child_process structure has its own args array, and
the standard way to set up its argv[] is to use that one, instead of
assigning to process->argv to point at an array that is outside.
Use that facility automatically fixes this issue.
Reported-by: Thomas Gummerer <t.gummerer@gmail.com> Signed-off-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
http-push: fix construction of hex value from path
The get_oid_hex_from_objpath takes care of creating a oid from a
pathname. It does this by memcpy'ing the first two bytes of the path to
the "hex" string, then skipping the '/', and then copying the rest of the
path to the "hex" string. Currently it fails to increase the pointer to
the hex string, so the second memcpy invocation just mashes over what
was copied in the first one, and leaves the last two bytes in the string
uninitialized.
This breaks valgrind in t5540, although the test passes without
valgrind:
==5490== Use of uninitialised value of size 8
==5490== at 0x13C6B5: hexval (cache.h:1238)
==5490== by 0x13C6DB: hex2chr (cache.h:1247)
==5490== by 0x13C734: get_sha1_hex (hex.c:42)
==5490== by 0x13C78E: get_oid_hex (hex.c:53)
==5490== by 0x118BDA: get_oid_hex_from_objpath (http-push.c:1023)
==5490== by 0x118C92: process_ls_object (http-push.c:1038)
==5490== by 0x118E5B: handle_remote_ls_ctx (http-push.c:1077)
==5490== by 0x118227: xml_end_tag (http-push.c:815)
==5490== by 0x50C1448: ??? (in /usr/lib/libexpat.so.1.6.6)
==5490== by 0x50C221B: ??? (in /usr/lib/libexpat.so.1.6.6)
==5490== by 0x50BFBF2: ??? (in /usr/lib/libexpat.so.1.6.6)
==5490== by 0x50C0B24: ??? (in /usr/lib/libexpat.so.1.6.6)
==5490== Uninitialised value was created by a stack allocation
==5490== at 0x118B63: get_oid_hex_from_objpath (http-push.c:1012)
==5490==
Fix this by correctly incrementing the pointer to the "hex" variable, so
the first two bytes are left untouched by the memcpy call, and the last
two bytes are correctly initialized.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
In cleanup_path we're passing in a char array, run a memcmp on it, and
run through it without ever checking if something is in the array in the
first place. This can lead us to access uninitialized memory, for
example in t5541-http-push-smart.sh test 7, when run under valgrind:
==4423== Conditional jump or move depends on uninitialised value(s)
==4423== at 0x242FA9: cleanup_path (path.c:35)
==4423== by 0x242FA9: mkpath (path.c:456)
==4423== by 0x256CC7: refname_match (refs.c:364)
==4423== by 0x26C181: count_refspec_match (remote.c:1015)
==4423== by 0x26C181: match_explicit_lhs (remote.c:1126)
==4423== by 0x26C181: check_push_refs (remote.c:1409)
==4423== by 0x2ABB4D: transport_push (transport.c:870)
==4423== by 0x186703: push_with_options (push.c:332)
==4423== by 0x18746D: do_push (push.c:409)
==4423== by 0x18746D: cmd_push (push.c:566)
==4423== by 0x1183E0: run_builtin (git.c:352)
==4423== by 0x11973E: handle_builtin (git.c:539)
==4423== by 0x11973E: run_argv (git.c:593)
==4423== by 0x11973E: main (git.c:698)
==4423== Uninitialised value was created by a heap allocation
==4423== at 0x4C2CD8F: malloc (in /usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so)
==4423== by 0x4C2F195: realloc (in /usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so)
==4423== by 0x2C196B: xrealloc (wrapper.c:137)
==4423== by 0x29A30B: strbuf_grow (strbuf.c:66)
==4423== by 0x29A30B: strbuf_vaddf (strbuf.c:277)
==4423== by 0x242F9F: mkpath (path.c:454)
==4423== by 0x256CC7: refname_match (refs.c:364)
==4423== by 0x26C181: count_refspec_match (remote.c:1015)
==4423== by 0x26C181: match_explicit_lhs (remote.c:1126)
==4423== by 0x26C181: check_push_refs (remote.c:1409)
==4423== by 0x2ABB4D: transport_push (transport.c:870)
==4423== by 0x186703: push_with_options (push.c:332)
==4423== by 0x18746D: do_push (push.c:409)
==4423== by 0x18746D: cmd_push (push.c:566)
==4423== by 0x1183E0: run_builtin (git.c:352)
==4423== by 0x11973E: handle_builtin (git.c:539)
==4423== by 0x11973E: run_argv (git.c:593)
==4423== by 0x11973E: main (git.c:698)
==4423==
Avoid this by using skip_prefix(), which knows not to go beyond the
end of the string.
Reported-by: Thomas Gummerer <t.gummerer@gmail.com> Signed-off-by: Jeff King <peff@peff.net> Reviewed-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
request-pull: capitalise "Git" to make it a proper noun
Of the many ways to spell the three-letter word, the variant "Git"
should be used when referring to a repository in a description; or, in
general, when it is used as a proper noun.
We thus change the pull-request template message so that it reads
"...in the Git repository at:"
Besides, this brings us in line with the documentation, see
Documentation/howto/using-signed-tag-in-pull-request.txt
Signed-off-by: Ann T Ropea <bedhanger@gmx.de> Acked-by: Jonathan Nieder <jrnieder@gmail.com> Reviewed-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Match what is done to pfd[i].revents when compute_revents() returns
0 to the upstream gnulib's commit d42461c3 ("poll: fixes for large
fds", 2015-02-20). The revents field is set to 0, without
incrementing the value rc to be returned from the function. The
original code left the field to whatever random value the field was
initialized to.
This fixes occasional hangs in git-upload-pack on HPE NonStop.
Signed-off-by: Randall S. Becker <randall.becker@nexbridge.ca> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
merge-strategies: avoid implying that "-s theirs" exists
The description of `-Xours` merge option has a parenthetical note
that tells the readers that it is very different from `-s ours`,
which is correct, but the description of `-Xtheirs` that follows it
carelessly says "this is the opposite of `ours`", giving a false
impression that the readers also need to be warned that it is very
different from `-s theirs`, which in reality does not even exist.
Decode =XY in quoted-printable segments only if X and Y are hexadecimal
digits, otherwise just copy them. That's at least better than
interpreting negative results from hexval() as a character.
Reported-by: Jeff King <peff@peff.net> Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit dc944b65f1 (get_sha1_with_context: dynamically
allocate oc->path, 2017-05-19) changed the rules that
callers must follow for seeing if we parsed a path in the
object name. The rules switched from "check if the oc.path
buffer is empty" to "check if the oc.path pointer is NULL".
But that commit forgot to update some sites in
cat_one_file(), meaning we might dereference a NULL pointer.
You can see this by making a path-aware request like
--textconv without specifying --path, and giving an object
name that doesn't have a path in it. Like:
git cat-file --textconv HEAD
which will reliably segfault.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some implementations of `echo` support the '-e' option to enable
backslash interpretation of the following string.
As an addition, they support '-E' to turn it off.
However, none of these are portable, POSIX doesn't even mention them,
and many implementations don't support them.
A check for '-n' is already done in check-non-portable-shell.pl,
extend it to cover '-n', '-e' or '-E'.
Signed-off-by: Torsten Bögershausen <tboegi@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Even though this probably works almost everywhere, it is undefined
behavior, and it could plausibly cause highly-optimizing compilers to
misbehave. C99 section 6.5.6 paragraph 8 explains:
If both the pointer operand and the result point to elements
of the same array object, or one past the last element of the
array object, the evaluation shall not produce an overflow;
otherwise, the behavior is undefined.
and (6.3.2.3.3) a null pointer does not point to anything.
Guard the loop with a NULL check to make the intent crystal clear to
even the most pedantic compiler. A suitably clever compiler could let
the NULL check only run in the first iteration, but regardless, this
overhead is likely to be dwarfed by the work to be done on each item.
This problem was noticed by Coverity.
[jn: using a NULL check instead of a placeholder empty list;
fleshed out the commit message based on mailing list discussion]
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
gc: call fscanf() with %<len>s, not %<len>c, when reading hostname
Earlier in this codepath, we (ab)used "%<len>c" to read the hostname
recorded in the lockfile into locking_host[HOST_NAME_MAX + 1] while
substituting <len> with the actual value of HOST_NAME_MAX.
This turns out to be incorrect, as it is an instruction to read
exactly the specified number of bytes. Because we are trying to
read at most that many bytes, we should be using "%<len>s" instead.
Helped-by: A. Wilcox <awilfox@adelielinux.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
While git doesn't track empty directories, git archive can be tricked
into putting some into archives. One way is to construct an empty tree
object, as t5004 does. While that is supported by the object database,
it can't be represented in the index and thus it's unlikely to occur in
the wild.
Another way is using the literal name of a directory in an exclude
pathspec -- its contents are are excluded, but the directory stub is
included. That's inconsistent: exclude pathspecs containing wildcards
don't leave empty directories in the archive.
Yet another way is have a few levels of nested subdirectories (e.g.
d1/d2/d3/file1) and ignoring the entries at the leaves (e.g. file1).
The directories with the ignored content are ignored as well (e.g. d3),
but their empty parents are included (e.g. d2).
As empty directories are not supported by git, they should also not be
written into archives. If an empty directory is really needed then it
can be tracked and archived by placing an empty .gitignore file in it.
There already is a mechanism in place for suppressing empty directories.
When read_tree_recursive() encounters a directory excluded by a pathspec
then it enters it anyway because it might contain included entries. It
calls the callback function before it is able to decide if the directory
is actually needed. For that reason git archive adds directories to a
queue and writes entries for them only when it encounters the first
child item -- but currently only if pathspecs with wildcards are used.
Queue *all* directories, no matter if there even are pathspecs present.
This prevents git archive from writing entries for empty directories in
all cases.
Suggested-by: Jeff King <peff@peff.net> Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
refs: strip out not allowed flags from ref_transaction_update
Callers are only allowed to pass certain flags into
ref_transaction_update, other flags are internal to it. To prevent
mistakes from the callers, strip the internal only flags out before
continuing.
This was noticed because of a compiler warning gcc 7.1.1 issued about
passing a NULL parameter as second parameter to memcpy (through
hashcpy):
In file included from refs.c:5:0:
refs.c: In function ‘ref_transaction_verify’:
cache.h:948:2: error: argument 2 null where non-null expected [-Werror=nonnull]
memcpy(sha_dst, sha_src, GIT_SHA1_RAWSZ);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from git-compat-util.h:165:0,
from cache.h:4,
from refs.c:5:
/usr/include/string.h:43:14: note: in a call to function ‘memcpy’ declared here
extern void *memcpy (void *__restrict __dest, const void *__restrict __src,
^~~~~~
The call to hascpy in ref_transaction_add_update is protected by the
passed in flags, but as we only add flags there, gcc notices
REF_HAVE_NEW or REF_HAVE_OLD flags could be passed in from the outside,
which would potentially result in passing in NULL as second parameter to
memcpy.
Fix both the compiler warning, and make the interface safer for its
users by stripping the internal flags out.
Suggested-by: Michael Haggerty <mhagger@alum.mit.edu> Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
We run `git rev-parse` though the shell, and quote its
argument only with single-quotes. This prevents most
metacharacters from being a problem, but misses the obvious
case when $name itself has single-quotes in it. We can fix
this by applying the usual shell-quoting formula.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The git-cvsserver script is old and largely unmaintained
these days. But git-shell allows untrusted users to run it
out of the box, significantly increasing its attack surface.
Let's drop it from git-shell's list of internal handlers so
that it cannot be run by default. This is not backwards
compatible. But given the age and development activity on
CVS-related parts of Git, this is likely to impact very few
users, while helping many more (i.e., anybody who runs
git-shell and had no intention of supporting CVS).
There's no configuration mechanism in git-shell for us to
add a boolean and flip it to "off". But there is a mechanism
for adding custom commands, and adding CVS support here is
fairly trivial. Let's document it to give guidance to
anybody who really is still running cvsserver.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge branch 'rs/archive-excluded-directory' into maint
"git archive" did not work well with pathspecs and the
export-ignore attribute.
We may want to resurrect the "we don't archive an empty directory"
bonus patch, but I do not mind merging the above early to 'next'
and leave it as a separate follow-up enhancement.
cf. <20170820090629.tumvqwzkromcykjf@sigill.intra.peff.net>
* rs/archive-excluded-directory:
archive: don't queue excluded directories
archive: factor out helper functions for handling attributes
t5001: add tests for export-ignore attributes and exclude pathspecs
Killing "git merge --edit" before the editor returns control left
the repository in a state with MERGE_MSG but without MERGE_HEAD,
which incorrectly tells the subsequent "git commit" that there was
a squash merge in progress. This has been fixed.
* mg/killed-merge:
merge: save merge state earlier
merge: split write_merge_state in two
merge: clarify call chain
Documentation/git-merge: explain --continue
"git apply" that is used as a better "patch -p1" failed to apply a
taken from a file with CRLF line endings to a file with CRLF line
endings. The root cause was because it misused convert_to_git()
that tried to do "safe-crlf" processing by looking at the index
entry at the same path, which is a nonsense---in that mode, "apply"
is not working on the data in (or derived from) the index at all.
This has been fixed.
* tb/apply-with-crlf:
apply: file commited with CRLF should roundtrip diff and apply
convert: add SAFE_CRLF_KEEP_CRLF
Merge branch 'cc/subprocess-handshake-missing-capabilities' into maint
When handshake with a subprocess filter notices that the process
asked for an unknown capability, Git did not report what program
the offending subprocess was running. This has been corrected.
We may want a follow-up fix to tighten the error checking, though.
* cc/subprocess-handshake-missing-capabilities:
sub-process: print the cmd when a capability is unsupported
"git svn" used with "--localtime" option did not compute the tz
offset for the timestamp in question and instead always used the
current time, which has been corrected.
* ur/svn-local-zone:
git svn fetch: Create correct commit timestamp when using --localtime
"git am -s" has been taught that some input may end with a trailer
block that is not Signed-off-by: and it should refrain from adding
an extra blank line before adding a new sign-off in such a case.
* pw/am-signoff:
am: fix signoff when other trailers are present
Merge branch 'ma/pager-per-subcommand-action' into maint
The "tag.pager" configuration variable was useless for those who
actually create tag objects, as it interfered with the use of an
editor. A new mechanism has been introduced for commands to enable
pager depending on what operation is being carried out to fix this,
and then "git tag -l" is made to run pager by default.
If this works out OK, I think there are low-hanging fruits in
other commands like "git branch" that outputs long list in one mode
while taking input in another.
* ma/pager-per-subcommand-action:
git.c: ignore pager.* when launching builtin as dashed external
tag: change default of `pager.tag` to "on"
tag: respect `pager.tag` in list-mode only
t7006: add tests for how git tag paginates
git.c: provide setup_auto_pager()
git.c: let builtins opt for handling `pager.foo` themselves
builtin.h: take over documentation from api-builtin.txt
"git log --tag=no-such-tag" showed log starting from HEAD, which
has been fixed---it now shows nothing.
* jk/rev-list-empty-input:
revision: do not fallback to default when rev_input_given is set
rev-list: don't show usage when we see empty ref patterns
revision: add rev_input_given flag
t6018: flesh out empty input/output rev-list tests
Merge branch 'st/lib-gpg-kill-stray-agent' into maint
Some versions of GnuPG fails to kill gpg-agent it auto-spawned
and such a left-over agent can interfere with a test. Work it
around by attempting to kill one before starting a new test.
* st/lib-gpg-kill-stray-agent:
t: lib-gpg: flush gpg agent on startup
"git commit-tree -F <file>", unlike "cat <file> | git
commit-tree" (i.e. feeding the same contents from the standard
input), added a missing final newline when the input ended in an
incomplete line.
Correct this inconsistency by leaving the incomplete line as-is,
as erring on the side of not touching the input is preferrable
and expected for a plumbing command like "commit-tree".
Signed-off-by: Ross Kabus <rkabus@aerotech.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using for_each_ref_in() with a full refname has always been
a questionable practice, but it became an error with b9c8e7f2fb (prefix_ref_iterator: don't trim too much,
2017-05-22), making "git rev-parse --bisect" pretty reliably
show a BUG.
Commit 03df567fbf (for_each_bisect_ref(): don't trim
refnames, 2017-06-18) fixed this case for revision.c, but
rev-parse handles this option on its own. We can use the
same solution here (and piggy-back on its test).
Signed-off-by: Jeff King <peff@peff.net> Acked-by: Michael Haggerty <mhagger@alum.mit.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>