Updates to the HTTP layer we made recently unconditionally used
features of libCurl without checking the existence of them, causing
compilation errors, which has been fixed. Also migrate the code to
check feature macros, not version numbers, to cope better with
libCurl that vendor ships with backported features.
* tc/curl-with-backports:
http: use a feature check to enable GSSAPI delegation control
http: fix handling of missing CURLPROTO_*
When handshake with a subprocess filter notices that the process
asked for an unknown capability, Git did not report what program
the offending subprocess was running. This has been corrected.
* cc/subprocess-handshake-missing-capabilities:
sub-process: print the cmd when a capability is unsupported
* jt/subprocess-handshake:
sub-process: refactor handshake to common function
Documentation: migrate sub-process docs to header
convert: add "status=delayed" to filter process protocol
convert: refactor capabilities negotiation
convert: move multiple file filter error handling to separate function
convert: put the flags field before the flag itself for consistent style
t0021: write "OUT <size>" only on success
t0021: make debug log file name configurable
t0021: keep filter log files on comparison
Merge branch 'dl/credential-cache-socket-in-xdg-cache' into maint
A recently added test for the "credential-cache" helper revealed
that EOF detection done around the time the connection to the cache
daemon is torn down were flaky. This was fixed by reacting to
ECONNRESET and behaving as if we got an EOF.
* dl/credential-cache-socket-in-xdg-cache:
credential-cache: interpret an ECONNRESET as an EOF
When a directory is not readable, "gitweb" fails to build the
project list. Work this around by skipping such a directory.
It might end up hiding a problem under the rug and a better
solution might be to loudly complain to the administrator pointing
out the problematic directory, but this will at least make it
"work".
Numerous bugs in walking of reflogs via "log -g" and friends have
been fixed.
* jk/reflog-walk:
reflog-walk: apply --since/--until to reflog dates
reflog-walk: stop using fake parents
rev-list: check reflog_info before showing usage
get_revision_1(): replace do-while with an early return
log: do not free parents when walking reflog
log: clarify comment about reflog cycles
revision: disallow reflog walking with revs->limited
t1414: document some reflog-walk oddities
Merge branch 'jc/http-sslkey-and-ssl-cert-are-paths' into maint
The http.{sslkey,sslCert} configuration variables are to be
interpreted as a pathname that honors "~[username]/" prefix, but
weren't, which has been fixed.
* jc/http-sslkey-and-ssl-cert-are-paths:
http.c: http.sslcert and http.sslkey are both pathnames
"%C(color name)" in the pretty print format always produced ANSI
color escape codes, which was an early design mistake. They now
honor the configuration (e.g. "color.ui = never") and also tty-ness
of the output medium.
* jk/ref-filter-colors:
ref-filter: consult want_color() before emitting colors
pretty: respect color settings for %C placeholders
rev-list: pass diffopt->use_colors through to pretty-print
for-each-ref: load config earlier
color: check color.ui in git_default_config()
ref-filter: pass ref_format struct to atom parsers
ref-filter: factor out the parsing of sorting atoms
ref-filter: make parse_ref_filter_atom a private function
ref-filter: provide a function for parsing sort options
ref-filter: move need_color_reset_at_eol into ref_format
ref-filter: abstract ref format into its own struct
ref-filter: simplify automatic color reset
t: use test_decode_color rather than literal ANSI codes
docs/for-each-ref: update pointer to color syntax
check return value of verify_ref_format()
Merge branch 'js/git-gui-msgfmt-on-windows' into maint
Because recent Git for Windows do come with a real msgfmt, the
build procedure for git-gui has been updated to use it instead of a
hand-rolled substitute.
* js/git-gui-msgfmt-on-windows:
git-gui (MinGW): make use of MSys2's msgfmt
git gui: allow for a long recentrepo list
git gui: de-dup selected repo from recentrepo history
git gui: cope with duplicates in _get_recentrepo
git-gui: remove duplicate entries from .gitconfig's gui.recentrepo
"git commit" used to discard the index and re-read from the filesystem
just in case the pre-commit hook has updated it in the middle; this
has been optimized out when we know we do not run the pre-commit hook.
* kw/commit-keep-index-when-pre-commit-is-not-run:
commit: skip discarding the index if there is no pre-commit hook
"git rebase", especially when it is run by mistake and ends up
trying to replay many changes, spent long time in silence. The
command has been taught to show progress report when it spends
long time preparing these many changes to replay (which would give
the user a chance to abort with ^C).
* kw/rebase-progress:
rebase: turn on progress option by default for format-patch
format-patch: have progress option while generating patches
"git stash -u" used the contents of the committed version of the
".gitignore" file to decide which paths are ignored, even when the
file has local changes. The command has been taught to instead use
the locally modified contents.
* nm/stash-untracked:
stash: clean untracked files before reset
* mh/packed-ref-store: (32 commits)
files-backend: cheapen refname_available check when locking refs
packed_ref_store: handle a packed-refs file that is a symlink
read_packed_refs(): die if `packed-refs` contains bogus data
t3210: add some tests of bogus packed-refs file contents
repack_without_refs(): don't lock or unlock the packed refs
commit_packed_refs(): remove call to `packed_refs_unlock()`
clear_packed_ref_cache(): don't protest if the lock is held
packed_refs_unlock(), packed_refs_is_locked(): new functions
packed_refs_lock(): report errors via a `struct strbuf *err`
packed_refs_lock(): function renamed from lock_packed_refs()
commit_packed_refs(): use a staging file separate from the lockfile
commit_packed_refs(): report errors rather than dying
packed_ref_store: make class into a subclass of `ref_store`
packed-backend: new module for handling packed references
packed_read_raw_ref(): new function, replacing `resolve_packed_ref()`
packed_ref_store: support iteration
packed_peel_ref(): new function, extracted from `files_peel_ref()`
repack_without_refs(): take a `packed_ref_store *` parameter
get_packed_ref(): take a `packed_ref_store *` parameter
rollback_packed_refs(): take a `packed_ref_store *` parameter
...
"git svn" used with "--localtime" option did not compute the tz
offset for the timestamp in question and instead always used the
current time, which has been corrected.
* ur/svn-local-zone:
git svn fetch: Create correct commit timestamp when using --localtime
"git am -s" has been taught that some input may end with a trailer
block that is not Signed-off-by: and it should refrain from adding
an extra blank line before adding a new sign-off in such a case.
* pw/am-signoff:
am: fix signoff when other trailers are present
* ma/parse-maybe-bool:
parse_decoration_style: drop unused argument `var`
treewide: deprecate git_config_maybe_bool, use git_parse_maybe_bool
config: make git_{config,parse}_maybe_bool equivalent
config: introduce git_parse_maybe_bool_text
t5334: document that git push --signed=1 does not work
Doc/git-{push,send-pack}: correct --sign= to --signed=
"git grep --recurse-submodules" has been reworked to give a more
consistent output across submodule boundary (and do its thing
without having to fork a separate process).
* bw/grep-recurse-submodules:
grep: recurse in-process using 'struct repository'
submodule: merge repo_read_gitmodules and gitmodules_config
submodule: check for unmerged .gitmodules outside of config parsing
submodule: check for unstaged .gitmodules outside of config parsing
submodule: remove fetch.recursesubmodules from submodule-config parsing
submodule: remove submodule.fetchjobs from submodule-config parsing
config: add config_from_gitmodules
cache.h: add GITMODULES_FILE macro
repository: have the_repository use the_index
repo_read_index: don't discard the index
Documentation/git-for-each-ref: clarify peeling of tags for --format
`*` in format strings means peeling of tag objects so that object field
names refer to the object that the tag object points at, instead of the
tag object itself.
Currently, this is documented using grammar that is clearly inspired by
classical latin, though missing more than an article in order to be
classical english.
Try and straighten that explanation out a bit.
Signed-off-by: Michael J Gruber <git@grubix.eu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Documentation: use proper wording for ref format strings
Various commands list refs and allow to use a format string for the
output that interpolates from the ref as well as the object it points
at (for-each-ref; branch and tag in list mode).
Currently, the documentation talks about interpolating from the object.
This is confusing because a ref points to an object but not vice versa,
so the object cannot possible know %(refname), for example. Thus, this is
wrong independent of refs being objects (one day, maybe) or not.
Change the wording to make this clearer (and distinguish it from formats
for the log family).
Signed-off-by: Michael J Gruber <git@grubix.eu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The handling of `status_only` no longer interferes with the handling of
`unmatch_name_only`. `--quiet` no longer affects the exit code when using
`-L`/`--files-without-match`.
Signed-off-by: Anthony Sottile <asottile@umich.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Long time ago, 23707811 ("diff: do not chomp hunk-header in the
middle of a character", 2008-01-02) introduced sane_truncate_line()
helper function to trim the "function header" line that is shown at
the end of the hunk header line, in order to avoid chomping it in
the middle of a single UTF-8 character. It also added a facility to
define a custom callback function to make it possible to extend it
to non UTF-8 encodings.
During the following 8 1/2 years, nobody found need for this custom
callback facility.
A custom callback function is a wrong design to use here anyway---if
your contents need support for non UTF-8 encoding, you shouldn't
have to write a custom function and recompile Git to plumb it in. A
better approach would be to extend sane_truncate_line() function and
have a new member in emit_callback to conditionally trigger it.
files-backend: cheapen refname_available check when locking refs
When locking references in preparation for updating them, we need to
check that none of the newly added references D/F conflict with
existing references (e.g., we don't allow `refs/foo` to be added if
`refs/foo/bar` already exists, or vice versa).
Prior to 524a9fdb51 (refs_verify_refname_available(): use function in
more places, 2017-04-16), conflicts with existing loose references
were checked by looking directly in the filesystem, and then conflicts
with existing packed references were checked by running
`verify_refname_available_dir()` against the packed-refs cache.
But that commit changed the final check to call
`refs_verify_refname_available()` against the *whole* files ref-store,
including both loose and packed references, with the following
comment:
> This means that those callsites now check for conflicts with all
> references rather than just packed refs, but the performance cost
> shouldn't be significant (and will be regained later).
That comment turned out to be too sanguine. User s@kazlauskas.me
reported that fetches involving a very large number of references in
neighboring directories were slowed down by that change.
The problem is that when fetching, each reference is updated
individually, within its own reference transaction. This is done
because some reference updates might succeed even though others fail.
But every time a reference update transaction is finished,
`clear_loose_ref_cache()` is called. So when it is time to update the
next reference, part of the loose ref cache has to be repopulated for
the `refs_verify_refname_available()` call. If the references are all
in neighboring directories, then the cost of repopulating the
reference cache increases with the number of references, resulting in
O(N²) effort.
The comment above also claims that the performance cost "will be
regained later". The idea was that once the packed-refs were finished
being split out into a separate ref-store, we could limit the
`refs_verify_refname_available()` call to the packed references again.
That is what we do now.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
sub-process: print the cmd when a capability is unsupported
In handshake_capabilities() we use warning() when a capability
is not supported, so the exit code of the function is 0 and no
further error is shown. This is a problem because the warning
message doesn't tell us which subprocess cmd failed.
On the contrary if we cannot write a packet from this function,
we use error() and then subprocess_start() outputs:
initialization for subprocess '<cmd>' failed
so we can know which subprocess cmd failed.
Let's improve the warning() message, so that we can know which
subprocess cmd failed.
Helped-by: Lars Schneider <larsxschneider@gmail.com> Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
read_info_alternates is not used from outside, so let's make it static.
We have to declare the function before link_alt_odb_entry instead of
moving the code around, link_alt_odb_entry calls read_info_alternates,
which in turn calls link_alt_odb_entry.
Signed-off-by: Stefan Beller <sbeller@google.com> Reviewed-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
sum(1) is a command for calculating checksums of the contents of files.
It was part of early editions of Unix ("Research Unix", 1972/1973, [1]).
cksum(1) appeared in 4.4BSD (1993) as a replacement [2], and became part
of POSIX.1-2008 [3]. OpenBSD 5.6 (2014) removed sum(1).
We only use sum(1) in t1002 to check for changes in three files. On
MinGW we use md5sum(1) instead. We could switch to the standard command
cksum(1) for all platforms; MinGW comes with GNU coreutils now, which
provides sum(1), cksum(1) and md5sum(1). Use our standard method for
checking for file changes instead: test_cmp.
It's more convenient because it shows differences nicely, it's faster on
MinGW because we have a special implementation there based only on
shell-internal commands, it's simpler as it allows us to avoid stripping
out unnecessary entries from the checksum file using grep(1), and it's
more consistent with the rest of the test suite.
We already compare changed files with their expected new contents using
diff(1), so we don't need to check with "test_must_fail test_cmp" if
they differ from their original state. A later patch could convert the
direct diff(1) calls to test_cmp as well.
With all sum(1) calls gone, remove the MinGW-specific implementation
from test-lib.sh as well.
doc: clarify "config --bool" behaviour with empty string
`git config --bool xxx.yyy` returns `true` for `[xxx]yyy` but
`false` for `[xxx]yyy=` or `[xxx]yyy=""`. This is tested in
t1300-repo-config.sh since 09bc098c2.
Signed-off-by: Andreas Heiduk <asheiduk@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `no_changes` function calls the `untracked_files` function through
command substitution. `untracked_files` will return null bytes because it
runs ls-files with the '-z' option.
Bash since version 4.4 warns about these null bytes. As they are not
required for the test that is being done, make sure `untracked_files`
does not output null bytes when not required.
This is achieved by adding a parameter to the `untracked_files` function to
specify wither `-z` should be passed to ls-files or not.
This warning is triggered when running git stash save -u resulting in
two warnings:
git-stash: line 43: warning: command substitution: ignored null byte
in input
Signed-off-by: Kevin Daudt <me@ikke.info> Signed-off-by: Junio C Hamano <gitster@pobox.com>
format-patch: have progress option while generating patches
When generating patches for the rebase command, if the user does
not realize the branch they are rebasing onto is thousands of
commits different, there is no progress indication after initial
rewinding message.
The progress meter as presented in this patch assumes the thousands of
patches to have a fine granularity as well as assuming to require all
the same amount of work/time for each, such that a steady progress bar
is achieved.
We do not want to estimate the time for each patch based e.g.
on their size or number of touched files (or parents) as that is too
expensive for just a progress meter.
This patch allows a progress option to be passed to format-patch
so that the user can be informed the progress of generating the
patch. This option is then used by the rebase command when
calling format-patch.
Signed-off-by: Kevin Willford <kewillf@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
tree-walk: convert fill_tree_descriptor() to object_id
All callers of fill_tree_descriptor() have been converted to object_id
already, so convert that function as well. As a nice side-effect we get
rid of NULL checks in tree-diff.c, as fill_tree_descriptor() already
does them for us.
Helped-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Rene Scharfe <l.s.r@web.de> Reviewed-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sign-off added should be that of the "committer", not that of the
"commit's author"; that is how the rest of Git adds sign-off using
sequencer.c::append_signoff().
Use the correct logical variable that identifies the committer.
Signed-off-by: Kaartic Sivaraam <kaarticsivaraam91196@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
http: use a feature check to enable GSSAPI delegation control
Turn the version check into a feature check to ensure this functionality
is also enabled with vendor supported curl versions where the feature
may have been backported.
Signed-off-by: Tom G. Christensen <tgc@jupiterrise.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit aeae4db1 refactored the handling of the curl protocol
restriction support into a function but failed to add a version
check for older versions of curl that lack CURLPROTO_* support.
Add the missing check and at the same time convert it to a feature
check instead of a version based check. This is done to ensure that
vendor supported curl versions that have had CURLPROTO_* support
backported are handled correctly.
Signed-off-by: Tom G. Christensen <tgc@jupiterrise.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
If calling git stash -u on a repo that contains a file that is not
ignored any more due to a current modification of the gitignore file,
this file is stashed but not remove from the working tree.
This is due to git-stash first doing a reset --hard which clears the
.gitignore file modification and the call git clean, leaving the file
untouched.
This causes git stash pop to fail due to the file existing.
This patch simply switches the order between cleaning and resetting
and adds a test for this usecase.
Reported-by: Sam Partington <sam@whiteoctober.co.uk> Signed-off-by: Nicolas Morey-Chaisemartin <nicolas@morey-chaisemartin.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the setting of oi->whence to sha1_loose_object_info() and
packed_object_info().
This allows sha1_object_info_extended() to not need to know about the
delta base cache. This will be useful during a future refactoring in
which packfile-related functions, including the handling of the delta
base cache, will be moved to a separate file.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Notably, let's declare that we aim to make "git add ''" illegal in
the cycle after this one.
The topic to do so, ex/deprecate-empty-pathspec-as-match-all, has
been cooking in 'next' too long, and will stay there during this
cycle, but not after.
The "tag.pager" configuration variable was useless for those who
actually create tag objects, as it interfered with the use of an
editor. A new mechanism has been introduced for commands to enable
pager depending on what operation is being carried out to fix this,
and then "git tag -l" is made to run pager by default.
* ma/pager-per-subcommand-action:
git.c: ignore pager.* when launching builtin as dashed external
tag: change default of `pager.tag` to "on"
tag: respect `pager.tag` in list-mode only
t7006: add tests for how git tag paginates
git.c: provide setup_auto_pager()
git.c: let builtins opt for handling `pager.foo` themselves
builtin.h: take over documentation from api-builtin.txt
"git log --tag=no-such-tag" showed log starting from HEAD, which
has been fixed---it now shows nothing.
* jk/rev-list-empty-input:
revision: do not fallback to default when rev_input_given is set
rev-list: don't show usage when we see empty ref patterns
revision: add rev_input_given flag
t6018: flesh out empty input/output rev-list tests
Because recent Git for Windows do come with a real msgfmt, the
build procedure for git-gui has been updated to use it instead of a
hand-rolled substitute.
* js/git-gui-msgfmt-on-windows:
git-gui (MinGW): make use of MSys2's msgfmt
git gui: allow for a long recentrepo list
git gui: de-dup selected repo from recentrepo history
git gui: cope with duplicates in _get_recentrepo
git-gui: remove duplicate entries from .gitconfig's gui.recentrepo
"git contacts" (in contrib/) now lists the address on the
"Reported-by:" trailer to its output, in addition to those on
S-o-b: and other trailers, to make it easier to notify (and thank)
the original bug reporter.
* eb/contacts-reported-by:
git-contacts: also recognise "Reported-by:"
A recently added test for the "credential-cache" helper revealed
that EOF detection done around the time the connection to the cache
daemon is torn down were flaky. This was fixed by reacting to
ECONNRESET and behaving as if we got an EOF.
* dl/credential-cache-socket-in-xdg-cache:
credential-cache: interpret an ECONNRESET as an EOF