Merge branch 'pw/unquote-path-in-git-pm' into maint
Code refactoring.
* pw/unquote-path-in-git-pm:
t9700: add tests for Git::unquote_path()
Git::unquote_path(): throw an exception on bad path
Git::unquote_path(): handle '\a'
add -i: move unquote_path() to Git.pm
Merge branch 'jk/gc-pre-detach-under-hook' into maint
We run an early part of "git gc" that deals with refs before
daemonising (and not under lock) even when running a background
auto-gc, which caused multiple gc processes attempting to run the
early part at the same time. This is now prevented by running the
early part also under the GC lock.
* jk/gc-pre-detach-under-hook:
gc: run pre-detach operations under lock
Merge branch 'rs/progress-overall-throughput-at-the-end' into maint
The progress meter did not give a useful output when we haven't had
0.5 seconds to measure the throughput during the interval. Instead
show the overall throughput rate at the end, which is a much more
useful number.
* rs/progress-overall-throughput-at-the-end:
progress: show overall rate in last update
Merge branch 'tb/push-to-cygwin-unc-path' into maint
On Cygwin, similar to Windows, "git push //server/share/repository"
ought to mean a repository on a network share that can be accessed
locally, but this did not work correctly due to stripping the double
slashes at the beginning.
This may need to be heavily tested before it gets unleashed to the
wild, as the change is at a fairly low-level code and would affect
not just the code to decide if the push destination is local. There
may be unexpected fallouts in the path normalization.
* tb/push-to-cygwin-unc-path:
cygwin: allow pushing to UNC paths
connect: reject paths that look like command line options
If we get a repo path like "-repo.git", we may try to invoke
"git-upload-pack -repo.git". This is going to fail, since
upload-pack will interpret it as a set of bogus options. But
let's reject this before we even run the sub-program, since
we would not want to allow any mischief with repo names that
actually are real command-line options.
You can still ask for such a path via git-daemon, but there's no
security problem there, because git-daemon enters the repo itself
and then passes "." on the command line.
Signed-off-by: Jeff King <peff@peff.net> Reviewed-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
connect: reject dashed arguments for proxy commands
If you have a GIT_PROXY_COMMAND configured, we will run it
with the host/port on the command-line. If a URL contains a
mischievous host like "--foo", we don't know how the proxy
command may handle it. It's likely to break, but it may also
do something dangerous and unwanted (technically it could
even do something useful, but that seems unlikely).
We should err on the side of caution and reject this before
we even run the command.
The hostname check matches the one we do in a similar
circumstance for ssh. The port check is not present for ssh,
but there it's not necessary because the syntax is "-p
<port>", and there's no ambiguity on the parsing side.
It's not clear whether you can actually get a negative port
to the proxy here or not. Doing:
git fetch git://remote:-1234/repo.git
keeps the "-1234" as part of the hostname, with the default
port of 9418. But it's a good idea to keep this check close
to the point of running the command to make it clear that
there's no way to circumvent it (and at worst it serves as a
belt-and-suspenders check).
Signed-off-by: Jeff King <peff@peff.net> Reviewed-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
connect: factor out "looks like command line option" check
We reject hostnames that start with a dash because they may
be confused for command-line options. Let's factor out that
notion into a helper function, as we'll use it in more
places. And while it's simple now, it's not clear if some
systems might need more complex logic to handle all cases.
Signed-off-by: Jeff King <peff@peff.net> Reviewed-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
connect: reject ssh hostname that begins with a dash
When commands like "git fetch" talk with ssh://$rest_of_URL/, the
code splits $rest_of_URL into components like host, port, etc., and
then spawns the underlying "ssh" program by formulating argv[] array
that has:
- the path to ssh command taken from GIT_SSH_COMMAND, etc.
- dashed options like '-batch' (for Tortoise), '-p <port>' as
needed.
- ssh_host, which is supposed to be the hostname parsed out of
$rest_of_URL.
- then the command to be run on the other side, e.g. git
upload-pack.
If the ssh_host ends up getting '-<anything>', the argv[] that is
used to spawn the command becomes something like:
which obviously is bogus, but depending on the actual value of
"<anything>", will make "ssh" parse and use it as an option.
Prevent this by forbidding ssh_host that begins with a "-".
Noticed-by: Joern Schneeweisz of Recurity Labs Reported-by: Brian at GitLab Signed-off-by: Junio C Hamano <gitster@pobox.com> Reviewed-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t/lib-proto-disable: restore protocol.allow after config tests
The tests for protocol.allow actually set that variable in
the on-disk config, run a series of tests, and then never
clean up after themselves. This means that whatever tests we
run after have protocol.allow=never, which may influence
their results.
In most cases we either exit after running these tests, or
do another round of test_proto(). In the latter case, this happens to
work because:
1. Tests of the GIT_ALLOW_PROTOCOL environment variable
override the config.
2. Tests of the specific config "protocol.foo.allow"
override the protocol.allow config.
3. The next round of protocol.allow tests start off by
setting the config to a known value.
However, it's a land-mine waiting to trap somebody adding
new tests to one of the t581x test scripts. Let's make sure
we clean up after ourselves.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
doc: reformat the paragraph containing the 'cut-line'
The paragraph that describes the 'scissors' cleanup mode of
'commit' had the 'cut-line' in the middle of a sentence. This
made it possible for the line to get wrapped on smaler windows.
This shouldn't be the case as it makes it hard for the user to
understand the structure of the cut-line.
Reformat the pragraph to make the 'cut-line' stand on a line of
it's own thus distinguishing it from the rest of the paragraph.
This further prevents it from getting wrapped to some extent.
Signed-off-by: Kaartic Sivaraam <kaarticsivaraam91196@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test_copy_bytes() function claims to read up to N bytes,
or until it gets EOF. But we never handle EOF in our loop,
and a short input will cause perl to go into an infinite
loop of read() getting zero bytes.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t1300: demonstrate that CamelCased aliases regressed
It is totally legitimate to add CamelCased aliases, but due to the way
config keys are compared, the case does not matter.
Except that now it does: the alias name is expected to be all
lower-case. This is a regression introduced by a9bcf6586d1 (alias: use
the early config machinery to expand aliases, 2017-06-14).
Noticed by Alejandro Pauly, diagnosed by Kevin Willford.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge branch 'kn/ref-filter-branch-list' into maint
The rewrite of "git branch --list" using for-each-ref's internals
that happened in v2.13 regressed its handling of color.branch.local;
this has been fixed.
* kn/ref-filter-branch-list:
ref-filter.c: drop return from void function
branch: set remote color in ref-filter branch immediately
branch: use BRANCH_COLOR_LOCAL in ref-filter format
branch: only perform HEAD check for local branches
After "git branch --move" of the currently checked out branch, the
code to walk the reflog of HEAD via "log -g" and friends
incorrectly stopped at the reflog entry that records the renaming
of the branch.
* jk/reflog-walk-maint:
reflog-walk: include all fields when freeing complete_reflogs
reflog-walk: don't free reflogs added to cache
reflog-walk: duplicate strings in complete_reflogs list
reflog-walk: skip over double-null oid due to HEAD rename
We normally try to avoid having two auto-gc operations run
at the same time, because it wastes resources. This was done
long ago in 64a99eb47 (gc: reject if another gc is running,
unless --force is given, 2013-08-08).
When we do a detached auto-gc, we run the ref-related
commands _before_ detaching, to avoid confusing lock
contention. This was done by 62aad1849 (gc --auto: do not
lock refs in the background, 2014-05-25).
These two features do not interact well. The pre-detach
operations are run before we check the gc.pid lock, meaning
that on a busy repository we may run many of them
concurrently. Ideally we'd take the lock before spawning any
operations, and hold it for the duration of the program.
This is tricky, though, with the way the pid-file interacts
with the daemonize() process. Other processes will check
that the pid recorded in the pid-file still exists. But
detaching causes us to fork and continue running under a
new pid. So if we take the lock before detaching, the
pid-file will have a bogus pid in it. We'd have to go back
and update it with the new pid after detaching. We'd also
have to play some tricks with the tempfile subsystem to
tweak the "owner" field, so that the parent process does not
clean it up on exit, but the child process does.
Instead, we can do something a bit simpler: take the lock
only for the duration of the pre-detach work, then detach,
then take it again for the post-detach work. Technically,
this means that the post-detach lock could lose to another
process doing pre-detach work. But in the long run this
works out.
That second process would then follow-up by doing
post-detach work. Unless it was in turn blocked by a third
process doing pre-detach work, and so on. This could in
theory go on indefinitely, as the pre-detach work does not
repack, and so need_to_gc() will continue to trigger. But
in each round we are racing between the pre- and post-detach
locks. Eventually, one of the post-detach locks will win the
race and complete the full gc. So in the worst case, we may
racily repeat the pre-detach work, but we would never do so
simultaneously (it would happen via a sequence of serialized
race-wins).
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
pre-rebase hook: capture documentation in a <<here document
Without this change, the sample hook does not pass a syntax check
(sh -n):
$ sh -n hooks--pre-rebase.sample
hooks--pre-rebase.sample: line 101: syntax error near unexpected token `('
hooks--pre-rebase.sample: line 101: ` merged into it again (either directly or indirectly).'
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge branch 'js/t5534-rev-parse-gives-multi-line-output-fix' into maint
A few tests that tried to verify the contents of push certificates
did not use 'git rev-parse' to formulate the line to look for in
the certificate correctly.
The split index code did not honor core.sharedrepository setting
correctly.
* cc/shared-index-permfix:
t1700: make sure split-index respects core.sharedrepository
t1301: move modebits() to test-lib-functions.sh
read-cache: use shared perms when writing shared index
Merge branch 'pw/rebase-i-regression-fix-tests' into maint
Fix a recent regression to "git rebase -i" and add tests that would
have caught it and others.
* pw/rebase-i-regression-fix-tests:
t3420: fix under GETTEXT_POISON build
rebase: add more regression tests for console output
rebase: add regression tests for console output
rebase -i: add test for reflog message
sequencer: print autostash messages to stderr
Merge branch 'jk/add-p-commentchar-fix' into maint
"git add -p" were updated in 2.12 timeframe to cope with custom
core.commentchar but the implementation was buggy and a
metacharacter like $ and * did not work.
The code to pick up and execute command alias definition from the
configuration used to switch to the top of the working tree and
then come back when the expanded alias was executed, which was
unnecessarilyl complex. Attempt to simplify the logic by using the
early-config mechanism that does not chdir around.
* js/alias-early-config:
alias: use the early config machinery to expand aliases
t7006: demonstrate a problem with aliases in subdirectories
t1308: relax the test verifying that empty alias values are disallowed
help: use early config when autocorrecting aliases
config: report correct line number upon error
discover_git_directory(): avoid setting invalid git_dir
The pretty-format specifiers like '%h', '%t', etc. had an
optimization that no longer works correctly. In preparation/hope
of getting it correctly implemented, first discard the optimization
that is broken.
* rs/pretty-add-again:
pretty: recalculate duplicate short hashes
Reported-by: Andre Hinrichs <andre.hinrichs@gmx.de> Signed-off-by: Ralf Thielow <ralf.thielow@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The first illustration of the "RECOVERING FROM UPSTREAM REBASE"
section in the 'git-rebase' documentation meant to depict that
there are number of commits on the 'master' branch, but it is
longer than the 'master' branch in the following illustrations
by one commit, even though there is no resetting of 'master' to
lose that commit.
Correct it.
Signed-off-by: Kaartic Sivaraam <kaarticsivaraam91196@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The values in struct throughput are only updated every 0.5 seconds. If
we're all done before that time span then the final update will show a
rate of 0 bytes/s, which is misleading if some bytes had been handled.
Remember the start time and show the total throughput instead.
And avoid division by zero by enforcing a minimum time span value of 1
(unit: 1/1024th of a second). That makes the resulting rate an
underestimation, but it's closer to the actual value than the currently
shown 0 bytes/s.
Reported-by: 積丹尼 Dan Jacobson <jidanni@jidanni.org> Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
apply: use strcmp(3) for comparing strings in gitdiff_verify_name()
We don't know the length of the C string "another". It could be
shorter than "name", which we compare it to using memchr(3). Call
strcmp(3) instead to avoid running over the end of the former, and
get rid of a strlen(3) call as a bonus.
Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
branch: set remote color in ref-filter branch immediately
We set the current and local branch colors at the top of the
build_format() function. Let's do the same for the remote
color. This saves a little bit of repetition, but more
importantly it puts all of the color-setting in the same
place. That makes it easier to see that we are coloring all
possibilities.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
branch: use BRANCH_COLOR_LOCAL in ref-filter format
Since 949af0684 (branch: use ref-filter printing APIs,
2017-01-10), git-branch's output is generated by passing a
custom format to the ref-filter code. This format forgot to
pass BRANCH_COLOR_LOCAL, meaning that local branches
(besides the current one) were never colored at all.
We can add it in the %(if) block where we decide whether the
branch is "current" or merely "local". Note that this means
the current/local coloring is either/or. You can't set:
[color "branch"]
local = blue
current = bold
and expect the current branch to be "bold blue". This
matches the pre-949af0684 behavior.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
branch: only perform HEAD check for local branches
When assembling the ref-filter format to show "git branch"
output, we put the "%(if)%(HEAD)" conditional at the start
of the overall format. But there's no point in checking
whether a remote branch matches HEAD, as it never will.
The check should go inside the local conditional; we
assemble that format inside the "local" strbuf.
By itself, this is just a minor optimization. But in a
future patch, we'll need this refactoring to fix
local-branch coloring.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
reflog-walk: include all fields when freeing complete_reflogs
When we encounter an error adding reflogs for a walk, we try
to free any logs we have read. But we didn't free all
fields, meaning that we could in theory leak all of the
"items" array (which would consitute the bulk of the
allocated memory).
This patch adds a helper which frees all of the entries and
uses it as appropriate.
As it turns out, the leak seems impossible to trigger with
the current code. Of the three error paths that free the
complete_reflogs struct, two only kick in when the items
array is empty, and the third was removed entirely in the
previous commit.
So this patch should be a noop in terms of behavior, but it
fixes a potential maintenance headache should anybody add a
new error path and copy the partial-free code. Which is
what happened in 5026b47175 (add_reflog_for_walk: avoid
memory leak, 2017-05-04), though its leaky call was the
third one that was recently removed.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The add_reflog_for_walk() function keeps a cache mapping
refnames to their reflog contents. We use a cached reflog
entry if available, and otherwise allocate and store a new
one.
Since 5026b47175 (add_reflog_for_walk: avoid memory leak,
2017-05-04), when we hit an error parsing a date-based
reflog spec, we free the reflog memory but leave the cache
entry pointing to the now-freed memory.
We can fix this by just leaving the memory intact once it
has made it into the cache. This may leave an unused entry
in the cache, but that's OK. And it means we also catch a
similar situation: we may not have allocated at all in this
invocation, but simply be pointing to a cached entry from a
previous invocation (which is relying on that entry being
present).
The new test in t1411 exercises this case and fails when run
with --valgrind or ASan.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
reflog-walk: duplicate strings in complete_reflogs list
As part of the add_reflog_to_walk() function, we keep a
string_list mapping refnames to their reflog contents. This
serves as a cache so that accessing the same reflog twice
requires only a single copy of the log in memory.
The string_list is initialized via xcalloc, meaning its
strdup_strings field is set to 0. But after inserting a
string into the list, we unconditionally call free() on the
string, leaving the list pointing to freed memory. If
another reflog is added (e.g., "git log -g HEAD HEAD"), then
the second one may have unpredictable results.
The extra free was added by 5026b47175 (add_reflog_for_walk:
avoid memory leak, 2017-05-04). Though if you look
carefully, you can see that the code was buggy even before
then. If we tried to read the reflogs by time but came up
with no entries, we exited with an error, freeing the string
in that code path. So the bug was harder to trigger, but
still there.
We can fix it by just asking the string list to make a copy
of the string. Technically we could fix the problem by not
calling free() on our string (and just handing over
ownership to the string list), but there are enough
conditionals that it's quite hard to figure out which code
paths need the free and which do not. Simpler is better
here.
The new test reliably shows the problem when run with
--valgrind or ASAN.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
reflog-walk: skip over double-null oid due to HEAD rename
Since 39ee4c6c2f (branch: record creation of renamed branch
in HEAD's log, 2017-02-20), a rename on the currently
checked out branch will create two entries in the HEAD
reflog: one where the branch goes away (switching to the
null oid), and one where it comes back (switching away from
the null oid).
This confuses the reflog-walk code. When walking backwards,
it first sees the null oid in the "old" field of the second
entry. Thanks to the "root commit" logic added by 71abeb753f
(reflog: continue walking the reflog past root commits,
2016-06-03), we keep looking for the next entry by scanning
the "new" field from the previous entry. But that field is
also null! We need to go just a tiny bit further, and look
at its "old" field. But with the current code, we decide the
reflog has nothing else to show and just give up. To the
user this looks like the reflog was truncated by the rename
operation, when in fact those entries are still there.
This patch does the absolute minimal fix, which is to look
back that one extra level and keep traversing.
The resulting behavior may not be the _best_ thing to do in
the long run (for example, we show both reflog entries each
with the same commit id), but it's a simple way to fix the
problem without risking further regressions.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
It seems to be a little-known feature of `grep` (and it certainly came
as a surprise to this here developer who believed to know the Unix tools
pretty well) that multiple patterns can be passed in the same
command-line argument simply by separating them by newlines. Watch, and
learn:
That behavior also extends to patterns passed via `-e`, and it is not
modified by passing the option `-E` (but trying this with -P issues the
error "grep: the -P option only supports a single pattern").
It seems that there are more old Unix hands who are surprised by this
behavior, as grep invocations of the form
grep "$(git rev-parse A B) C" file
were introduced in a85b377d041 (push: the beginning of "git push
--signed", 2014-09-12), and later faithfully copy-edited in b9459019bbb
(push: heed user.signingkey for signed pushes, 2014-10-22).
Please note that the output of `git rev-parse A B` separates the object
IDs via *newlines*, not via spaces, and those newlines are preserved
because the interpolation is enclosed in double quotes.
As a consequence, these tests try to validate that the file contains
either A's object ID, or B's object ID followed by C, or both. Clearly,
however, what the test wanted to see is that there is a line that
contains all of them.
This is clearly unintended, and the grep invocations in question really
match too many lines.
Fix the test by avoiding the newlines in the patterns.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update sha1dc from the latest version by the upstream maintainer[1].
See commit 6b851e536b ("sha1dc: update from upstream", 2017-06-06) for
the last update.
This solves the Big Endian detection on Solaris reported against
v2.13.2[2], hopefully without any regressions. A version of this has
been tested on two Solaris SPARC installations, Cygwin (by jturney on
cygwin@Freenode), and on numerous more boring systems (mainly
linux/x86_64). See [3] for a discussion of the implementation and
platform-specific issues.
See commit a0103914c2 ("sha1dc: update from upstream", 2017-05-20) and 6b851e536b ("sha1dc: update from upstream", 2017-06-06) for previous
attempts in the 2.13 series to address various compile-time feature
detection in this library.
Avoid running over the end of line -- a C string whose length is not
known to this function -- by using starts_with() instead of memcmp(3)
for checking if it starts with "/dev/null". Also simply include the
newline in the string constant to compare against. Drop a comment that
just states the obvious.
Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
unquote_path() does not handle quoted paths containing '\a',
even though quote.c::unquote_c_style() does, and quote.c:sq_lookup[]
tells quote.c::sq_must_quote() that '\007' must be quoted as '\a'.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move unquote_path() from git-add--interactive to Git.pm so it can be
used by other scripts. Note this is a straight copy, it does not
handle '\a'. That will be fixed in the next commit.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk> Signed-off-by: Junio C Hamano <gitster@pobox.com>
submodule--helper: do not call utf8_fprintf() unnecessarily
The helper function utf8_fprintf(fp, ...) has exactly the same
effect to the output stream fp as fprintf(fp, ...) does, and the
only difference is that its return value counts in display columns
consumed (assuming that the payload is encoded in UTF-8), as opposed
to number of bytes.
There is no reason to call it unless the caller cares about its
return value.
GNU grep allows "\(A\|B\)" as alternation in BRE, but this is an
extension not understood by some other implementations of grep
(Michael Kebe reported an breakage on Solaris).
Rewrite the offending test to ERE and use egrep instead.
Noticed-by: Michael Kebe <michael.kebe@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Defining USE_ASCIIDOCTOR=1 when building Git uses asciidoctor over
asciidoc when generating DocBook and man page documentation. However,
the contrib/subtree module does not presently honour that flag.
This causes a build failure when asciidoc is not present on the build
system. Instead, adapt the main Documentation/Makefile logic to use
asciidoctor when requested.
Signed-off-by: A. Wilcox <AWilcox@Wilcox-Tech.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
apply: check git diffs for mutually exclusive header lines
A file can either be added, removed, copied, or renamed, but no two of
these actions can be done by the same patch. Some of these combinations
provoke error messages due to missing file names, and some are only
caught by an assertion. Check git patches already as they are parsed
and report conflicting lines on sight.
Found by Vegard Nossum using AFL.
Reported-by: Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
An empty string as mode specification is accepted silently by git apply,
as Vegard Nossum found out using AFL. It's interpreted as zero. Reject
such bogus file modes, and only accept ones consisting exclusively of
octal digits.
Reported-by: Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2c93286a (fix "git apply --index ..." not to deref NULL) added a check
for git patches missing a +++ line, preventing a segfault. Check for
missing --- lines as well, and add a test for each case.
Found by Vegard Nossum using AFL.
Original-patch-by: Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The preceding bitmap entries have a 1-byte XOR-offset and 1-byte flags,
so their size is not a multiple of 4. Thus the name-hash cache is only
guaranteed to be 2-byte aligned and so we must use get_be32 rather than
indexing the array directly.
Signed-off-by: James Clarke <jrtc27@jrtc27.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t1700: make sure split-index respects core.sharedrepository
Add a few tests to check that both the split-index file and the
shared-index file are created using the right permissions when
core.sharedrepository is set.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>