Emit helpful status for accidental "git stash" save
If the user types "git stash" mistakenly thinking that this will list
their stashes he/she may be surprised to see that it actually saved
a new stash and reset their working tree and index.
In the worst case they might not know how to recover the state. So
help them by telling them exactly what was saved and also how to
restore it immediately.
Signed-off-by: Wincent Colaiuta <win@wincent.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix $EDITOR regression introduced by rewrite in C.
When git-tag and git-commit launches the editor, they used to
honor EDITOR="editor -options args..." but recent rewrite in C
insisted on $EDITOR to be the path to the editor executable.
Currently git send-email does not accept $EDITOR with arguments, eg,
emacs -nw, when starting an editor to produce a cover letter. This
patch changes this by letting the shell handle the option parsing.
Signed-off-by: Gustaf Hendeby <hendeby@isy.liu.se> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The command itself takes an optional <pattern> argument that
limits the shown tags to the ones that match when in listing
mode that is triggered with '-l' option. The <pattern> is not
an optional option-argument to '-l'.
With this fix, "git tag -l -n 4 v0.99" works as expected.
It also removes a few bogus tests in t7004.
Signed-off-by: Pierre Habouzit <madcoder@debian.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The tar-ball and the git archive itself is fine, but yes, the diff from
2.6.23 to 2.6.24-rc6 is bad. It's the "trim_common_tail()" optimization
that has caused way too much pain.
Very interesting breakage. The patch was actually "correct" in a (rather
limited) technical sense, but the context at the end was missing because
while the trim_common_tail() code made sure to keep enough common context
to allow a valid diff to be generated, the diff machinery itself could
decide that it could generate the diff differently than the "obvious"
solution.
Thee sad fact is that the git optimization (which is very important for
"git blame", which needs no context), is only really valid for that one
case where we really don't need any context.
[jc: since this is shared with "git diff -U0" codepath, context recovery
to the end of line needs to be done even for zero context case.]
In everyday tasks, "repack -a -d -f" won't be used, so there
is not much point mentioning "repack". By showing the --prune
option to "gc", we can do without mentioning "git prune", too.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some entries in .gitignore are obselete. These should be cleaned up
just for the sake of general tidiness and so that any developers who
have a working tree that was moved forward without a clean know that
they have old stuff in their work tree.
Signed-off-by: Charles Bailey <charles@hashpling.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
shell-scripts usage(): consistently exit with non-zero
Earlier conversion of shell scripts to parse-options made usage()
to run "git cmd -h" which in turn emit LONG_USAGE and exit with 0
status. This is inconsistent with the scripts that do not use
parse-options, whose usage() died with the message, exiting with 1.
Reallow git-rebase --interactive --continue if commit is unnecessary
During git-rebase --interactive's --continue implementation we used
to silently restart the rebase if the user had made the commit
for us. This is common if the user stops to edit a commit and
does so by amending it. My recent change to watch git-commit's
exit status broke this behavior.
Thanks to Bernt Hansen for catching it in 1.5.4-rc1.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The prepare_log_message() function serves two purposes:
- Prepares the commit log message template, to be given to the end
user;
- Return true if there is something committable;
7168624c3530d8c7ee32f930f8fb2ba302b9801f (Do not generate full commit
log message if it is not going to be used) cheated to omit the former
when we know the log message template is not going to be used. However,
its replacement logic to see if there is something committable was
botched. When amending, it should compare the index with the parent of
the HEAD, not the current HEAD. Otherwise you cannot run --amend to
fix only the message without changing the tree.
The earlier test stripped away expected number of 'z' but the output
would have been very hard to read once somebody broke the common tail
optimization. Instead, count the number of 'z' and show it, to help
diagnosing the problem better in the future.
Teach diff machinery to display other prefixes than "a/" and "b/"
With the new options "--src-prefix=<prefix>", "--dst-prefix=<prefix>"
and "--no-prefix", you can now control the path prefixes of the diff
machinery. These used to by hardwired to "a/" for the source prefix
and "b/" for the destination prefix.
Initial patch by Pascal Obry. Sane option names suggested by Linus.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Catch and handle git-commit failures in git-rebase --interactive
If git-commit fails for any reason then git-rebase needs to stop
and not plow through the rest of the series. Its unlikely that
a future git-commit will succeed if the current attempt failed.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we are rebasing changes that contain potential whitespace
errors that our .git/hooks/pre-commit hook looks for and fails
on then git-commit will fail to commit that change. This causes
git-rebase--interactive to squash commits together, even though it
was not requested to do so by the todo file.
Passing --no-verify to git-commit makes git-rebase -i behave more
like git-rebase normally would in such conditions, providing more
consistent behavior between the different rebase implementations.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
When merging conflicting submodule changes from a supermodule, generate
a conflict message saying what went wrong. Also leave the tree in a state
where git status shows the conflict, and git submodule status gives the user
enough information to do the merge manally. Previously this would just fail.
Signed-off-by: Finn Arne Gangstad <finnag@pvv.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix git-instaweb breakage on MacOS X due to the limited sed functionality
git-instaweb relied on a pipe in a sed script, but this is not supported
by MacOS X sed when using BREs. git-instaweb relies on a working perl
in any case, and perl re are more consistent between platforms, so
replace sed invocation with an equivalent perl invocation.
Also, fix the documented -b "" to work without giving a spurious 'command
not found' error.
Signed-off-by: Charles Bailey <charles@hashpling.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's possible for bad clients to commit symlinks without the
5-character "link " prefix in symlinks. So guard around this
bug in SVN and make a best effort to create symlinks if the
"link " prefix is missing.
More information on this SVN bug is described here:
http://subversion.tigris.org/issues/show_bug.cgi?id=2692
To be pedantic, there is still a corner case that neither we nor
SVN can handle: If somebody made a link using a broken SVN
client where "link " is the first part of its path, e.g.
"link sausage", then we'd end up having a symlink which points
to "sausage" because we incorrectly stripped the "link ".
Hopefully this hasn't happened in practice, but if it has,
it's not our fault SVN is broken :)
Thanks to Benoit Sigoure and Sverre Johansen for reporting
and feedback.
git-svn: avoid leaving leftover committer/author info in rebase
We set the 6 environment variables for controlling
committer/author email/name/time for every commit.
We do this in the parent process to be passed to
git-commit-tree, because open3() doesn't afford us the control
of doing it only in the child process. This means we leave them
hanging around in the main process until the next revision comes
around and all 6 environment variables are overwridden again.
Unfortunately, for the last commit, leaving them hanging around
means the git-rebase invocation will pick it up, rewriting the
rebased commit with incorrect author information. This should fix
it.
git-filter-branch.sh: more portable tr usage: use \012, not \n.
I hesitate to suggest this, since GNU tr has accepted \n for 15 years,
but there are supposedly a few crufty vendor-supplied versions of tr still
in use. Also, all of the other uses of tr-with-newline in git use \012.
Signed-off-by: Jim Meyering <meyering@redhat.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
filter-branch: Remove broken and unnecessary summary of rewritten refs.
There was an attempt to list the refs that were rewritten by filtering
the output of 'git show-ref' for 'refs/original'. But it got the
grep argument wrong, which did not account for the SHA1 that is listed
before the ref.
Moreover, right before this summary is the loop that actually does the
rewriting, and the rewritten refs are listed there anyway. So this extra
summary is plainly too verbose.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at> Signed-off-by: Junio C Hamano <gitster@pobox.com>
and that "merge" is a cache_entry pointer. If we have a non-zero
FLEX_ARRAY size, it will cause us to copy the first few bytes of the
name too.
That is technically wrong even for FLEX_ARRAY being 1, but you'll never
notice, since the filenames should always be the same with the current
code. But if we do the same thing for a rename, we'd be screwed.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since commit 376ccb8cbb453343998e734d8a1ce79f57a4e092 (rebase -i: style
fixes and minor cleanups), unchanged SHA-1s are no longer mapped via
$REWRITTEN. But the updating phase was not prepared for the old head
not being rewritten.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Plug a resource leak in threaded pack-objects code.
A mutex and a condition variable is allocated for each thread and torn
down when the thread terminates. However, for certain workloads it can
happen that some threads are actually not started at all. In this case
we would leak the mutex and condition variable. Now we allocate them only
for those threads that are actually started.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at> Signed-off-by: Junio C Hamano <gitster@pobox.com>
We used to unconditionally add a message-id to the outgoing
email without bothering to check if it already had one.
Instead, let's use the existing one.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The exit status from curl was accidentally lost by the
'case' statement. We need to explicitly save it so that $?
doesn't get overwritten.
This improves the error message when fetching from an http
repository which has never had update-server-info run.
Previously, it would fail to note the fetch error and
produce multiple errors about the lack of origin branches.
It now correctly suggests running git-update-server-info.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
threaded pack-objects: Use condition variables for thread communication.
In the threaded pack-objects code the main thread and the worker threads
must mutually signal that they have assigned a new pack of work or have
completed their work, respectively. Previously, the code used mutexes that
were locked in one thread and unlocked from a different thread, which is
bogus (and happens to work on Linux).
Here we rectify the implementation by using condition variables: There is
one condition variable on which the main thread waits until a thread
requests new work; and each worker thread has its own condition variable
on which it waits until it is assigned new work or signaled to terminate.
As a cleanup, the worker threads are spawned only after the initial work
packages have been assigned.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at> Acked-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Because print_summary() forgot to call diff_setup_done() after futzing with
diff output options, it failed to activate recursive diff, which resulted in
an incorrect summary.
We need to be extra careful recovering the removed common section, so
that we do not break context nor the changed incomplete line (i.e. the
last line that does not end with LF).
whitespace: more accurate initial-indent highlighting
Instead of highlighting the entire initial indent, highlight only the
problematic spaces.
In the case of an indent like ' \t \t' there may be multiple problematic
ranges, so it's easiest to emit the highlighting as we go instead of
trying rember disjoint ranges and do it all at the end.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
After this patch, "written" counts the number of bytes up to and
including the most recently seen tab. This allows us to detect (and
count) spaces by comparing to "i".
This allows catching initial indents like '\t ' (a tab followed
by 8 spaces), while previously indent-with-non-tab caught only indents
that consisted entirely of spaces.
This also allows fixing an indent-with-non-tab regression, so we can
again detect indents like '\t \t'.
Also update tests to catch these cases.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The variable leading_space is initially used to represent the index of
the last space seen before a non-space. Then later it represents the
index of the first non-indent character.
It will prove simpler to replace it by a variable representing a number
of bytes. Eventually it will represent the number of bytes written so
far (in the stream != NULL case).
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The convention for helper scripts has been
git-$TOOL--$HELPER. Since this is a "browse" helper for the
"help" tool, git-help--browse is a more sensible name.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
gitweb: Make config_to_multi return [] instead of [undef]
This is important for the list of clone urls, where if there are
no per-repository clone URL configured, the default base URLs
are never used for URL construction without this patch.
Add tests for different ways of setting project URLs, just in case.
Note that those tests in current form wouldn't detect breakage fixed
by this patch, as it only checks for errors and not for expected
output.
Signed-off-by: Petr Baudis <pasky@suse.cz> Signed-off-by: Jakub Narebski <jnareb@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
gitweb: Teach "a=blob" action to be more lenient about blob/file mime type
Since 930cf7dd7cc6b87d173f182230763e1f1913d319 'blob' action knows the
file type; if the file type is not "text/*" or one of common network
image formats/mimetypes (gif, png, jpeg) then the action "blob"
defaulted to "blob_plain". This caused the problem if mimetypes file
was not well suited for web, for example returning "application/x-sh"
for "*.sh" shell scripts, instead of "text/plain" (or other "text/*").
Now "blob" action defaults to "blob_plain" ('raw' view) only if file
is of type which is neither "text/*" nor "image/{gif,png,jpeg}"
AND it is binary file. Otherwise it assumes that it can be displayed
either in <img> tag ("image/*" mimetype), or can be displayed line by
line (otherwise).
Signed-off-by: Jakub Narebski <jnareb@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
gitweb: disambiguate heads and tags withs the same name
Avoid wrong disambiguation that would link logs/trees of tags and
heads which share the same name to the same page, leading to
a disambiguation that would prefer the tag, thus making it impossible
to access the corresponding head log and tree without hacking the url
by hand.
It does it by using full refname (with 'refs/heads/' or 'refs/tags/'
prefix) instead of shortened one in the URLs in 'heads' and 'tags'
tables. This makes URLs (and refs) provided by gitweb unambiguous.
Signed-off-by: Guillaume Seguin <guillaume@segu.in> Signed-off-by: Jakub Narebski <jnareb@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
teach bash completion to treat commands with "--" as a helper
There is a convention that commands containing a double-dash
are implementation details and not to be used by mortals. We
should automatically remove them from the completion
suggestions as such.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The recovered context lines were not LF terminated due to off-by-one
error, which also caused the outer loop to count the number of recovered
lines to terminate after running only once.
Most of them are still stubs, but the procedure to build the HTML
documentation, maintaining the index and installing the end product are
there.
I placed names of people who are likely to know the most about the topic
in the stub files, so that volunteers will know whom to ask questions as
needed.
This config variable makes it possible to choose the default format
used to display help. This format will be used only if no option
like -a|--all|-i|--info|-m|--man|-w|--web is passed to "git-help".
The following values are possible for this variable:
- "man" --> "man" program is used
- "info" --> "info" program is used
- "web" --> "git-browse-help" is used
By default we still show help using "man".
This patch also adds -m|--man command line option to use "man"
to allow overriding the "help.format" configuration variable.
Note that this patch also revert some recent changes in
"git-browse-help" because they prevented to look for config
variables in the global configuration file.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* wc/diff:
Test interaction between diff --check and --exit-code
Use shorter error messages for whitespace problems
Add tests for "git diff --check" with core.whitespace options
Make "diff --check" output match "git apply"
Unify whitespace checking
diff --check: minor fixups
"diff --check" should affect exit status
Setting CURLOPT_HTTPHEADER doesn't add HTTP headers, but replaces whatever
set of headers was configured before, so setting to NULL doesn't have any
magic meaning, and is pretty much useless when setting to another list
right after.
Signed-off-by: Mike Hommey <mh@glandium.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix random sha1 in error message in http-fetch and http-push
When a downloaded ref doesn't contain a sha1, the error message displays
a random sha1 because of uninitialized memory. This happens when cloning
a repository that is already a clone of another one, in which case
refs/remotes/origin/HEAD is a symref.
Signed-off-by: Mike Hommey <mh@glandium.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The specialized pool allocator fast-import uses aligned objects on the
size of a pointer, which was not sufficient at least on Sparc. Instead,
make the alignment for objects of type unitmax_t.
Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
remote: Fix bogus make_branch() call in configuration reader.
The configuration reader to enumerate branches that have configuration
data were not careful enough and failed to skip "branch.<variable>"
entries (e.g. branch.autosetupmerge). This resulted in bogus attempt to
allocate huge memory.
commit: allow --amend to reuse message from another commit
After tentatively applying a patch from a contributor, you can get a
replacement patch with corrected code and unusable commit log message.
In such a case, this sequence ought to give you an editor based on the
message in the earlier commit, to let you describe an incremental
improvement:
git reset --hard HEAD^ ;# discard the earlier one
git am <corrected-patch
git commit --amend -c HEAD@{1}
Unfortunately, --amend insisted reusing the message from the commit
being amended, ignoring the -c option. This corrects it.
git-svn: handle our top-level path being deleted and later re-added
Previously, git-svn would ignore cases where the path we're
tracking is removed from the repository. This was to prevent
heads with follow-parent from ending up with a tree full of
empty revisions (and thus breaking rename detection).
The previous behavior is fine until the path we're tracking
is re-added later on, leading to the old files being merged
in with the new files in the directory (because the old
files were never marked as deleted)
We will now only remove all the old files locally that were
deleted remotely iff we detect the directory we're in is being
created from scratch.
Thanks for Marcus D. Hanwell for the bug report and
Peter Baumann for the analysis.
Signed-off-by: Eric Wong <normalperson@yhbt.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Because we feed the changed filenames to CVS on the command
line, it was possible for massive commits to overflow the
system exec limits. Instead, we now do an xargs-like split
of the arguments.
This means that we lose some of the atomicity of calling CVS
in one shot. Since CVS commits are not atomic, but the CVS
protocol is, the possible effects of this are not clear;
however, since CVS doesn't provide a different interface,
this is our only option for large commits (short of writing
a CVS client library).
The argument size limit is arbitrarily set to 64kB. This
should be high enough to trigger only in rare cases where it
is necessary, so normal-sized commits are not affected by
the atomicity change.
For consistency, make the two tools report whitespace errors in the
same way (the output of "diff --check" has been tweaked to match
that of "git apply").
Note that although the textual content is basically the same only
"git diff --check" provides a colorized version of the problematic
lines; making "git apply" do colorization will require more extensive
changes (figuring out the diff colorization preferences of the user)
and so that will be a subject for another commit.
Signed-off-by: Wincent Colaiuta <win@wincent.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit unifies three separate places where whitespace checking was
performed:
- the whitespace checking previously done in builtin-apply.c is
extracted into a function in ws.c
- the equivalent logic in "git diff" is removed
- the emit_line_with_ws() function is also removed because that also
rechecks the whitespace, and its functionality is rolled into ws.c
The new function is called check_and_emit_line() and it does two things:
checks a line for whitespace errors and optionally emits it. The checking
is based on lines of content rather than patch lines (in other words, the
caller must strip the leading "+" or "-"); this was suggested by Junio on
the mailing list to allow for a future extension to "git show" to display
whitespace errors in blobs.
At the same time we teach it to report all classes of whitespace errors
found for a given line rather than reporting only the first found error.
Signed-off-by: Wincent Colaiuta <win@wincent.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is no reason --exit-code and --check-diff must be mutually
exclusive, so assign different bits to different results and allow them
to be returned from the command. Introduce diff_result_code() to factor
out the common code to decide final status code based on diffopt
settings and use it everywhere.
Update tests to match the above fix.
Turning pager off when "diff --check" is used is a regression.