Datestamp recorded in "Hg" format patch was reformatted incorrectly
to an e-mail looking date using locale dependant strftime, causing
patch application to fail.
* dl/am-hg-locale:
am: invoke perl's strftime in C locale
Replace our use of fnmatch(3) with a more feature-rich wildmatch.
A handful patches at the bottom have been moved to nd/wildmatch to
graduate as part of that branch, before this series solidifies.
We may want to mark USE_WILDMATCH as an experimental curiosity a
bit more clearly (i.e. should not be enabled in production
environment, because it will make the behaviour between builds
unpredictable).
* nd/retire-fnmatch:
Makefile: add USE_WILDMATCH to use wildmatch as fnmatch
wildmatch: advance faster in <asterisk> + <literal> patterns
wildmatch: make a special case for "*/" with FNM_PATHNAME
test-wildmatch: add "perf" command to compare wildmatch and fnmatch
wildmatch: support "no FNM_PATHNAME" mode
wildmatch: make dowild() take arbitrary flags
wildmatch: rename constants and update prototype
Since git-rev-parse already checks for the $GIT_DIR environment
variable and that it returns an actual git repository, there is no
need to repeat the checks again here.
This also fixes a problem where git-svn did not work in cases where
.git was a file with a gitdir: link.
[ew: squashed test case,
delay setting GIT_DIR until after `git rev-parse --cdup` to fix t9101,
(thanks to Junio)]
Signed-off-by: Barry Wardell <barry.wardell@gmail.com> Signed-off-by: Eric Wong <normalperson@yhbt.net>
Add an extra hook so that "git push" that is run without making
sure what is being pushed is sane can be checked and rejected (as
opposed to the user deciding not pushing).
* as/pre-push-hook:
Add sample pre-push hook script
push: Add support for pre-push hooks
hooks: Add function to check if a hook exists
Add a new command "git check-ignore" for debugging .gitignore
files.
The variable names may want to get cleaned up but that can be done
in-tree.
* as/check-ignore:
clean.c, ls-files.c: respect encapsulation of exclude_list_groups
t0008: avoid brace expansion
add git-check-ignore sub-command
setup.c: document get_pathspec()
add.c: extract new die_if_path_beyond_symlink() for reuse
add.c: extract check_path_for_gitlink() from treat_gitlinks() for reuse
pathspec.c: rename newly public functions for clarity
add.c: move pathspec matchers into new pathspec.c for reuse
add.c: remove unused argument from validate_pathspec()
dir.c: improve docs for match_pathspec() and match_pathspec_depth()
dir.c: provide clear_directory() for reclaiming dir_struct memory
dir.c: keep track of where patterns came from
dir.c: use a single struct exclude_list per source of excludes
Regression fix to stop "git push" complaining "target ref already
exists", when it is not the real reason the command rejected the
request (e.g. non-fast-forward).
* cr/push-force-tag-update:
push: fix "refs/tags/ hierarchy cannot be updated without --force"
* mh/imap-send-shrinkage:
imap-send.c: simplify logic in lf_to_crlf()
imap-send.c: fold struct store into struct imap_store
imap-send.c: remove unused field imap_store::uidvalidity
imap-send.c: use struct imap_store instead of struct store
imap-send.c: remove unused field imap_store::trashnc
imap-send.c: remove namespace fields from struct imap
imap-send.c: remove struct imap argument to parse_imap_list_l()
imap-send.c: inline parse_imap_list() in parse_list()
imap-send.c: remove some unused fields from struct store
imap-send.c: remove struct message
imap-send.c: remove struct store_conf
iamp-send.c: remove unused struct imap_store_conf
imap-send.c: remove struct msg_data
imap-send.c: remove msg_data::flags, which was always zero
* mo/cvs-server-updates:
t9402: Use TABs for indentation
t9402: Rename check.cvsCount and check.list
t9402: Simplify git ls-tree
t9402: Add missing &&; Code style
t9402: No space after IO-redirection
t9402: Dont use test_must_fail cvs
t9402: improve check_end_tree() and check_end_full_tree()
t9402: sed -i is not portable
cvsserver Documentation: new cvs ... -r support
cvsserver: add t9402 to test branch and tag refs
cvsserver: support -r and sticky tags for most operations
cvsserver: Add version awareness to argsfromdir
cvsserver: generalize getmeta() to recognize commit refs
cvsserver: implement req_Sticky and related utilities
cvsserver: add misc commit lookup, file meta data, and file listing functions
cvsserver: define a tag name character escape mechanism
cvsserver: cleanup extra slashes in filename arguments
cvsserver: factor out git-log parsing logic
* git://ozlabs.org/~paulus/gitk:
gitk: Display important heads even when there are many
gitk: Improve display of list of nearby tags and heads
gitk: Fix display of branch names on some commits
gitk: Update Swedish translation (296t)
gitk: When searching, only highlight files when in Patch mode
gitk: Fix error message when clicking on a connecting line
gitk: Fix crash when not using themed widgets
gitk: Use bindshiftfunctionkey to bind Shift-F5
gitk: Refactor code for binding modified function keys
gitk: Work around empty back and forward images when buttons are disabled
gitk: Highlight first search result immediately on incremental search
gitk: Highlight current search hit in orange
gitk: Synchronize highlighting in file view when scrolling diff
Makefile: Replace merge-file.h with merge-blobs.h in LIB_H
Commit fa2364ec ("Which merge_file() function do you mean?", 06-12-2012)
renamed the files merge-file.[ch] to merge-blobs.[ch], but forgot to
rename the header file in the definition of the LIB_H macro.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Various 'reset' optimizations and clean-ups, followed by a change
to allow "git reset" to work even on an unborn branch.
* mz/reset-misc:
reset: update documentation to require only tree-ish with paths
reset [--mixed]: use diff-based reset whether or not pathspec was given
reset: allow reset on unborn branch
reset $sha1 $pathspec: require $sha1 only to be treeish
reset.c: inline update_index_refresh()
reset.c: finish entire cmd_reset() whether or not pathspec is given
reset [--mixed]: only write index file once
reset.c: move lock, write and commit out of update_index_refresh()
reset.c: move update_index_refresh() call out of read_from_tree()
reset.c: replace switch by if-else
reset: avoid redundant error message
reset --keep: only write index file once
reset.c: share call to die_if_unmerged_cache()
reset.c: extract function for updating {ORIG_,}HEAD
reset.c: remove unnecessary variable 'i'
reset.c: extract function for parsing arguments
reset: don't allow "git reset -- $pathspec" in bare repo
reset.c: pass pathspec around instead of (prefix, argv) pair
reset $pathspec: exit with code 0 if successful
reset $pathspec: no need to discard index
"git clean" states what it is going to remove and then goes on to
remove it, but sometimes it only discovers things that cannot be
removed after recursing into a directory, which makes the output
confusing and even wrong.
* zk/clean-report-failure:
git-clean: Display more accurate delete messages
Merge branch 'nz/send-email-headers-are-case-insensitive' into maint
When users spell "cc:" in lowercase in the fake "header" in the
trailer part, "git send-email" failed to pick up the addresses from
there. As e-mail headers field names are case insensitive, this
script should follow suit and treat "cc:" and "Cc:" the same way.
* nz/send-email-headers-are-case-insensitive:
git-send-email: treat field names as case-insensitively
* rs/zip-tests:
t5003: check if unzip supports symlinks
t5000, t5003: move ZIP tests into their own script
t0024, t5000: use test_lazy_prereq for UNZIP
t0024, t5000: clear variable UNZIP, use GIT_UNZIP instead
Teach commands in the "log" family to optionally pay attention to
the mailmap.
* ap/log-mailmap:
log --use-mailmap: optimize for cases without --author/--committer search
log: add log.mailmap configuration option
log: grep author/committer using mailmap
test: add test for --use-mailmap option
log: add --use-mailmap option
pretty: use mailmap to display username and email
mailmap: add mailmap structure to rev_info and pp
mailmap: simplify map_user() interface
mailmap: remove email copy and length limitation
Use split_ident_line to parse author and committer
string-list: allow case-insensitive string list
git-svn: do not escape certain characters in paths
Subversion 1.7 and newer implement HTTPv2, an extension that should make HTTP
more efficient. Servers with support for this protocol will make the subversion
client library take an alternative code path that checks (with assertions)
whether the URL is "canonical" or not.
This patch fixes an issue I encountered while trying to `git svn dcommit` a
rename action for a file containing a single quote character ("User's Manual"
to "UserMan.tex"). It does not happen for older subversion 1.6 servers nor
non-HTTP(S) protocols such as the native svn protocol, only on an Apache server
shipping SVN 1.7. Trying to `git svn dcommit` under the aforementioned
conditions yields the following error which aborts the commit process:
Committing to http://example.com/svn ...
perl: subversion/libsvn_subr/dirent_uri.c:1520: uri_skip_ancestor:
Assertion `svn_uri_is_canonical(child_uri, ((void *)0))' failed.
error: git-svn died of signal 6
An analysis of the subversion source for the cause:
- The assertion originates from uri_skip_ancestor which calls
svn_uri_is_canonical, which fails when the URL contains percent-encoded values
that do not necessarily have to be encoded (not "canonical" enough). This is
done by a table lookup in libsvn_subr/path.c. Putting some debugging prints
revealed that the character ' is indeed encoded to %27 which is not
considered canonical.
- url_skip_ancestor is called by svn_ra_neon__get_baseline_info with the root
repository URL and path as parameters;
- which is called by copy_resource (libsvn_ra_neon/commit.c) for a copy action
(or in my case, renaming which is actually copy + delete old);
- which is called by commit_add_dir;
- which is assigned as a structure method "add_file" in
svn_ra_neon__get_commit_editor.
In the whole path, the path argument is not modified.
Through some more uninteresting wrapper functions, the Perl bindings gives you
access to the add_file method which will pass the path argument without
modifications to svn.
git-svn calls the "R"(ename) subroutine in Git::SVN::Editor which contains:
326 my $fbat = $self->add_file($self->repo_path($m->{file_b}), $pbat,
327 $self->url_path($m->{file_a}), $self->{r});
"repo_path" basically returns the path as-is, unless the "svn.pathnameencoding"
configuration property is set. "url_path" tries to escape some special
characters, but does not take all special characters into account, thereby
causing the path to contain some escaped characters which do not have to be
escaped.
The list of characters not to be escaped are taken from the
subversion/libsvn_subr/path.c file to fully account for all characters. Tested
with a filename containing all characters in the range 0x20 to 0x78 (inclusive).
Signed-off-by: Peter Wu <lekensteyn@gmail.com> Signed-off-by: Eric Wong <normalperson@yhbt.net>
This header not only declares but also defines the contents of the
array that holds the list of command names and help text. Do not
include it in multiple places to waste text space.
* git://bogomips.org/git-svn:
git-svn: teach find-rev to find near matches
git svn: do not overescape URLs (fallback case)
Git::SVN::Editor::T: pass $deletions to ->A and ->D
We used to convert timestamps in metadata comment of Hg patch to
mbox-looking Date: field using strftime, without making sure the
resulting string is not translated. Always use C locale for this.
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-completion.bash: replace zsh notation that breaks bash 3.X
When commit d8b45314 began separating the zsh completion from the bash
completion, it introduced a zsh completion "bridge" section into the bash
completion script for zsh users to use until they migrated to the zsh
script. The zsh '+=()' append-to-array notation prevents bash 3.00.15 on
CentOS 4.x from loading the completion script and breaks test 9902. We can
easily work around this by using standard Bash array notation.
Signed-off-by: Brandon Casey <drafnel@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
An internal ls-tree call made by completion code only to probe if
a path exists in the tree recorded in a commit object leaked error
messages when the path is not there. It is not an error at all and
should not be shown to the end user.
* ds/completion-silence-in-tree-path-probe:
git-completion.bash: silence "not a valid object" errors
In the precedence order, the environment variable $EMAIL comes
between the built-in default (i.e. taking value by asking the
system's gethostname() etc.) and the user.email configuration
variable; the documentation implied that it is stronger than the
configuration like $GIT_COMMITTER_EMAIL is, which is wrong.
* pe/doc-email-env-is-trumped-by-config:
git-commit-tree(1): correct description of defaults
Create a sample of a script for a pre-push hook. The main purpose is to
illustrate how a script may parse the information which is supplied to
such a hook. The script may also be useful to some people as-is for
avoiding to push commits which are marked as a work in progress.
Signed-off-by: Aaron Schrab <aaron@schrab.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add support for a pre-push hook which can be used to determine if the
set of refs to be pushed is suitable for the target repository. The
hook is run with two arguments specifying the name and location of the
destination repository.
Information about what is to be pushed is provided by sending lines of
the following form to the hook's standard input:
If the hook exits with a non-zero status, the push will be aborted.
This will allow the script to determine if the push is acceptable based
on the target repository and branch(es), the commits which are to be
pushed, and even the source branches in some cases.
Signed-off-by: Aaron Schrab <aaron@schrab.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a single SVN repository is split into multiple Git repositories
many SVN revisions will exist in only one of the Git repositories
created. For some projects the only way to build a working artifact is
to check out corresponding versions of various repositories, with no
indication of what those are in the Git world - in the SVN world the
revision numbers are sufficient.
By adding "--before" to "git-svn find-rev" we can say "tell me what this
repository looked like when that other repository looked like this":
Subversion's canonical URLs are intended to make URL comparison easy
and therefore have strict rules about what characters are special
enough to urlencode and what characters should be left alone.
When in the fallback codepath because unable to use libsvn's own
canonicalization function for some reason, escape special characters
in URIs according to the svn_uri__char_validity[] table in
subversion/libsvn_subr/path.c (r935829). The libsvn versions that
trigger this code path are not likely to be strict enough to care, but
it's nicer to be consistent.
Noticed by using SVN 1.6.17 perl bindings, which do not provide
SVN::_Core::svn_uri_canonicalize (triggering the fallback code),
with libsvn 1.7.5, whose do_switch is fussy enough to care:
Committing to file:///home/jrn/src/git/t/trash%20directory.\
t9118-git-svn-funky-branch-names/svnrepo/pr%20ject/branches\
/more%20fun%20plugin%21 ...
svn: E235000: In file '[...]/subversion/libsvn_subr/dirent_uri.c' \
line 2291: assertion failed (svn_uri_is_canonical(url, pool))
error: git-svn died of signal 6
not ok - 3 test dcommit to funky branch
After this change, the '!' in 'more%20fun%20plugin!' is not urlencoded
and t9118 passes again.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Eric Wong <normalperson@yhbt.net>
Git::SVN::Editor::T: pass $deletions to ->A and ->D
This shouldn't make a difference because the $deletions hash is
only used when adding a directory (see 379862ec, 2012-02-20) but
it's nice to be consistent to make reading smoother anyway. No
functional change intended.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Eric Wong <normalperson@yhbt.net>
push: fix "refs/tags/ hierarchy cannot be updated without --force"
When pushing to update a branch with a commit that is not a
descendant of the commit at the tip, a wrong message "already
exists" was given, instead of the correct "non-fast-forward", if we
do not have the object sitting in the destination repository at the
tip of the ref we are updating.
The primary cause of the bug is that the check in a new helper
function is_forwardable() assumed both old and new objects are
available and can be checked, which is not always the case.
The way the caller uses the result of this function is also wrong.
If the helper says "we do not want to let this push go through", the
caller unconditionally translates it into "we blocked it because the
destination already exists", which is not true at all in this case.
Fix this by doing these three things:
* Remove unnecessary not_forwardable from "struct ref"; it is only
used inside set_ref_status_for_push();
* Make "refs/tags/" the only hierarchy that cannot be replaced
without --force;
* Remove the misguided attempt to force that everything that
updates an existing ref has to be a commit outside "refs/tags/"
hierarchy.
The policy last one tried to implement may later be resurrected and
extended to ensure fast-forwardness (defined as "not losing
objects", extending from the traditional "not losing commits from
the resulting history") when objects that are not commit are
involved (e.g. an annotated tag in hierarchies outside refs/tags),
but such a logic belongs to "is this a fast-forward?" check that is
done by ref_newer(); is_forwardable(), which is now removed, was not
the right place to do so.
fix clang -Wunused-value warnings for error functions
Commit a469a10 wraps some error calls in macros to give the
compiler a chance to do more static analysis on their
constant -1 return value. We limit the use of these macros
to __GNUC__, since gcc is the primary beneficiary of the new
information, and because we use GNU features for handling
variadic macros.
However, clang also defines __GNUC__, but generates warnings
with -Wunused-value when these macros are used in a void
context, because the constant "-1" ends up being useless.
Gcc does not complain about this case (though it is unclear
if it is because it is smart enough to see what we are
doing, or too dumb to realize that the -1 is unused). We
can squelch the warning by just disabling these macros when
clang is in use.
Signed-off-by: Max Horn <max@quendi.de> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
attr: avoid calling find_basename() twice per path
find_basename() is only used inside collect_all_attrs(), called once
in prepare_attr_stack, then again after prepare_attr_stack()
returns. Both calls return exact same value. Reorder the code to do
the same task once. Also avoid strlen() because we knows the length
after finding basename.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
refs: use strncmp() instead of strlen() and memcmp()
Simplify ref_entry_cmp_sslice() by using strncmp() to compare the
length-limited key and a NUL-terminated entry. While we're at it,
retain the const attribute of the input pointers.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>
clean.c, ls-files.c: respect encapsulation of exclude_list_groups
Consumers of the dir.c traversal API should avoid assuming knowledge
of the internal implementation of exclude_list_groups. Therefore
when adding items to an exclude list, it should be accessed via the
pointer returned from add_exclude_list(), rather than by referencing
a location within dir.exclude_list_groups[EXC_CMDL].
Signed-off-by: Adam Spiers <git@adamspiers.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* The first character in the string used to be special-cased to get
around the fact that msg->buf[i - 1] is not defined for i == 0.
Instead, keep track of the previous character in a separate
variable, "lastc", initialized in such a way to let the loop handle
i == 0 correctly.
* Make the two loops over the string look as similar as possible to
make it more obvious that the count computed in the first pass
agrees with the true length of the new string written in the second
pass. As a side effect, this makes it possible to use the "j"
counter in place of lfnum and new_len.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Reviewed-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
imap-send.c: fold struct store into struct imap_store
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Reviewed-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
imap-send.c: remove unused field imap_store::uidvalidity
I suspect that the existence of both imap_store::uidvalidity and
store::uidvalidity was an accident.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Reviewed-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
imap-send.c: use struct imap_store instead of struct store
In fact, all struct store instances are upcasts of struct imap_store
anyway, so stop making the distinction.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Reviewed-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
imap-send.c: remove unused field imap_store::trashnc
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Reviewed-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
imap-send.c: remove namespace fields from struct imap
They are unused, and their removal means that a bunch of list-related
infrastructure can be disposed of.
It might be that the "NAMESPACE" response that is now skipped over in
get_cmd_result() should never be sent by the server. But somebody
would have to check the IMAP protocol and how we interact with the
server to be sure. So for now I am leaving that branch of the "if"
statement there.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Reviewed-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
imap-send.c: remove struct imap argument to parse_imap_list_l()
It was always set to NULL.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Reviewed-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
imap-send.c: inline parse_imap_list() in parse_list()
The function is only called from here.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Reviewed-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Reviewed-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Reviewed-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Reviewed-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that its flags member has been deleted, all that is left is a
strbuf. So use a strbuf directly.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Reviewed-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
imap-send.c: remove msg_data::flags, which was always zero
This removes the need for function imap_make_flags(), so delete it,
too.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Reviewed-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 82dce99 (attr: more matching optimizations from .gitignore -
2012-10-15) changed match_attr structure but it did not update
DEBUG_ATTR-specific code. This fixes it.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
remote-hg: fix handling of file perms when pushing
Previously, when changing and committing an executable file, the file
would loose its executable bit on the hg side. Likewise, symlinks ended
up as "normal" files". This was not immediately apparent on the git side
unless one did a fresh clone.
Signed-off-by: Max Horn <max@quendi.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mercurial might convert the URL to something more appropriate, like an
absolute path. Lets store that instead of the original URL, which won't
work from a different working directory if it's relative.
Suggested-by: Max Horn <max@quendi.de> Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com> Signed-off-by: Max Horn <max@quendi.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Tests assume that this is set to something valid. Make sure
that the 'clone --use-client-spec' does not leak its changes
out into the rest of the tests.
Signed-off-by: Pete Wyckoff <pw@padd.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git p4: fail gracefully on sync with no master branch
If --branch was used to build a repository with no
refs/remotes/p4/master, future syncs will not know
which branch to sync. Notice this situation and
print a helpful error message.
Signed-off-by: Pete Wyckoff <pw@padd.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
For a clone or sync, --branch says where the newly imported
branch should go, or which existing branch to sync up. It
takes an argument, which is currently either something that
starts with "refs/", or if not, "refs/heads/p4" is prepended.
Putting it in heads seems like a bad default; these should
go in remotes/p4/ in most situations. Make that the new default,
and be more liberal in the form of the branch name.
Signed-off-by: Pete Wyckoff <pw@padd.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make sure that the example on how to use git-p4.branchList
works if typed directly. In particular, it does not make sense
to set a config variable until the git repository has been
initialized.
Reported-by: Olivier Delalleau <shish@keba.be> Signed-off-by: Pete Wyckoff <pw@padd.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using the --branch argument to "git p4 clone", one
might specify a destination for p4 changes different from
the default refs/remotes/p4/master. Both cases should
create a master branch and checkout files.
Signed-off-by: Pete Wyckoff <pw@padd.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is code to create a symbolic reference from p4/HEAD to
p4/master. This allows saying "git show p4" as a shortcut
to "git show p4/master", for example.
But this reference was only created on the second "git p4 sync"
(or first sync after a clone). Make it work on the initial
clone or sync.
Signed-off-by: Pete Wyckoff <pw@padd.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>