"git worktree add" used to do a "find an available name with stat
and then mkdir", which is race-prone. This has been fixed by using
mkdir and reacting to EEXIST in a loop.
* ra/t3600-test-path-funcs:
t3600: use helpers to replace test -d/f/e/s <path>
t3600: modernize style
test functions: add function `test_file_not_empty`
"git rebase" uses the refs/rewritten/ hierarchy to store its
intermediate states, which inherently makes the hierarchy per
worktree, but it didn't quite work well.
* nd/rewritten-ref-is-per-worktree:
Make sure refs/rewritten/ is per-worktree
files-backend.c: reduce duplication in add_per_worktree_entries_to_dir()
files-backend.c: factor out per-worktree code in loose_fill_ref_dir()
When the "clean" filter can reduce the size of a huge file in the
working tree down to a small "token" (a la Git LFS), there is no
point in allocating a huge scratch area upfront, but the buffer is
sized based on the original file size. The convert mechanism now
allocates very minimum and reallocates as it receives the output
from the clean filter process.
* jh/resize-convert-scratch-buffer:
convert: avoid malloc of original file size
"git config --type=color ..." is meant to replace "git config --get-color"
but there is a slight difference that wasn't documented, which is
now fixed.
* jk/config-type-color-ends-with-lf:
config: document --type=color output is a complete line
A recent update broke "is this object available to us?" check for
well-known objects like an empty tree (which should yield "yes",
even when there is no on-disk object for an empty tree), which has
been corrected.
* jk/virtual-objects-do-exist:
rev-list: allow cached objects in existence check
On platforms where "git fetch" is killed with SIGPIPE (e.g. OSX),
the upload-pack that runs on the other end that hangs up after
detecting an error could cause "git fetch" to die with a signal,
which led to a flakey test. "git fetch" now ignores SIGPIPE during
the network portion of its operation (this is not a problem as we
check the return status from our write(2)s).
"git fsck --connectivity-only" omits computation necessary to sift
the objects that are not reachable from any of the refs into
unreachable and dangling. This is now enabled when dangling
objects are requested (which is done by default, but can be
overridden with the "--no-dangling" option).
* jk/fsck-doc:
fsck: always compute USED flags for unreachable objects
doc/fsck: clarify --connectivity-only behavior
"git rebase" that was reimplemented in C did not set ORIG_HEAD
correctly, which has been corrected.
* js/rebase-orig-head-fix:
built-in rebase: set ORIG_HEAD just once, before the rebase
built-in rebase: demonstrate that ORIG_HEAD is not set correctly
built-in rebase: use the correct reflog when switching branches
built-in rebase: no need to check out `onto` twice
The final report from "git bisect" used to show the suspected
culprit using a raw "diff-tree", with which there is no output for
a merge commit. This has been updated to use a more modern and
human readable output that still is concise enough.
* jk/bisect-final-output:
bisect: make diff-tree output prettier
bisect: fix internal diff-tree config loading
bisect: use string arguments to feed internal diff-tree
CFLAGS now can be tweaked when invoking Make while using
DEVELOPER=YesPlease; this did not work well before.
* ab/makefile-help-devs-more:
Makefile: allow for combining DEVELOPER=1 and CFLAGS="..."
Makefile: move the setting of *FLAGS closer to "include"
Makefile: Move *_LIBS assignment into its own section
Makefile: add/remove comments at top and tweak whitespace
Makefile: move "strip" assignment down from flags
Makefile: remove an out-of-date comment
In commit 735285b403 ("am: fix signoff when other trailers are present",
2017-08-08) tests using variable $signoff were rewritten and it is no
longer used, so just remove it from the test setup.
Signed-off-by: Andrei Rybak <rybak.a.v@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
We have something much better now: --rebase-merges (which is a
complete re-design --preserve-merges, with a lot of issues fixed such as
the inability to reorder commits with --preserve-merges).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git runs a stat loop to find a worktree name that's available and
then does mkdir on the found name. Turn it to mkdir loop to avoid
another invocation of worktree add finding the same free name and
creating the directory first.
Signed-off-by: Michal Suchanek <msuchanek@suse.de> Acked-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
If you use "log -L" with an output format like "--raw" or "--stat",
we'll silently ignore the format and just output the normal patch.
Let's detect and complain about this, which at least tells the user
what's going on.
The tests here aren't exhaustive over the set of all formats, but it
should at least let us know if somebody breaks the format-checking.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Makefile uses 'find' utility to enumerate all the *.h header
files, which is expensive on platforms with slow filesystems; it
now optionally uses "ls-files" if working within a repository,
which is a trick similar to how all sources are enumerated to run
ETAGS on.
* js/find-lib-h-with-ls-files-when-possible:
Makefile: use `git ls-files` to list header files, if possible
The set of header files used by "make hdr-check" unconditionally
included sha256/gcrypt.h, even when it is not used, causing the
make target to fail. We now skip it when GCRYPT_SHA256 is not in
use.
* rj/hdr-check-gcrypt-fix:
Makefile: fix 'hdr-check' when GCRYPT not installed
Recently the Git for Windows project started the upgrade process to
a MSYS2 runtime version based on Cygwin v3.x.
This has the very notable consequence that `$(uname -r)` no longer
reports a version starting with "2", but a version with "3".
That breaks our build, as df5218b4c30b (config.mak.uname: support MSys2,
2016-01-13) simply did not expect the version reported by `uname -r` to
depend on the underlying Cygwin version: it expected the reported
version to match the "2" in "MSYS2".
So let's invert that test case to test for *anything else* than a
version starting with "1" (for MSys). That should safeguard us for the
future, even if Cygwin ends up releasing versionsl like 314.272.65536.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t3600: use helpers to replace test -d/f/e/s <path>
Take advantage of helper functions test_path_is_dir(),
test_path_is_missing(), etc. to replace `test -d|f|e|s` since the
functions make the code more readable and have better error
messages.
Signed-off-by: Rohit Ashiwal <rohit.ashiwal265@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The tests in `t3600-rm.sh` were written long time ago, and has a lot
of style violations, including the mixed use of tabs and spaces, not
having the title and the opening quote of the body on the first line
of the tests, and other shell script style violations. Update it to
match the CodingGuidelines.
Signed-off-by: Rohit Ashiwal <rohit.ashiwal265@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
a9be29c981 (sequencer: make refs generated by the `label` command
worktree-local, 2018-04-25) adds refs/rewritten/ as per-worktree
reference space. Unfortunately (my bad) there are a couple places that
need update to make sure it's really per-worktree.
- add_per_worktree_entries_to_dir() is updated to make sure ref listing
look at per-worktree refs/rewritten/ instead of per-repo one [1]
- common_list[] is updated so that git_path() returns the correct
location. This includes "rev-parse --git-path".
This mess is created by me. I started trying to fix it with the
introduction of refs/worktree, where all refs will be per-worktree
without special treatments. Unfortunate refs/rewritten came before
refs/worktree so this is all we can do.
This also fixes logs/refs/worktree not being per-worktree.
[1] note that ref listing still works sometimes. For example, if you
have .git/worktrees/foo/refs/rewritten/bar AND the directory
.git/worktrees/refs/rewritten, refs/rewritten/bar will show up.
add_per_worktree_entries_to_dir() is only needed when the directory
.git/worktrees/refs/rewritten is missing.
Reported-by: Phillip Wood <phillip.wood123@gmail.com> Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 20d2a30f8ffe (Makefile: replace perl/Makefile.PL with simple make
rules, 2017-12-10), Git stopped using MakeMaker. Therefore, that
definition in the MINGW-specific section became useless.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Reviewed-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rather than parse options manually, which is both difficult to
read and error prone, parse options supplied to commit-tree
using the parse-options api.
It was discovered that the --no-gpg-sign option was documented
but not implemented in commit 70ddbd7767 (commit-tree: add missing
--gpg-sign flag, 2019-01-19), and the existing implementation
would attempt to translate the option as a tree oid. It was also
suggested earlier in commit 55ca3f99ae (commit-tree: add and document
--no-gpg-sign, 2013-12-13) that commit-tree should be migrated to
utilize the parse-options api, which could help prevent mistakes
like this in the future. Hence this change.
Also update the documentation to better describe that mixing
`-m` and `-F` options will correctly compose commit log messages in the
order in which the options are given.
In the process, mark various strings for translation.
Signed-off-by: Brandon Richardson <brandon1024.br@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "-L" is in use, we ignore any diff output format that the user
provides to us, and just always print a patch (with extra context lines
covering the whole area of interest). It's not entirely clear what we
should do with all formats (e.g., should "--stat" show just the diffstat
of the touched lines, or the stat for the whole file?).
But "-s" is pretty clear: the user probably wants to see just the
commits that touched those lines, without any diff at all. Let's at
least make that work.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
We write the output of a "clean" filter into a strbuf. Rather than
growing the strbuf dynamically as we read its output, we make the
initial allocation as large as the original input file. This is a good
guess when the filter is just tweaking a few bytes, but it's disastrous
when the point of the filter is to condense a very large file into a
short identifier (e.g., the way git-lfs and git-annex do). We may ask to
allocate many gigabytes, causing the allocation to fail and Git to
die().
Instead, let's just let strbuf do its usual growth.
When the clean filter does output something around the same size as the
worktree file, the buffer will need to be reallocated until it fits,
starting at 8192 and doubling in size. Benchmarking indicates that
reallocation is not a significant overhead for outputs up to a
few MB in size.
Signed-off-by: Joey Hess <id@joeyh.name> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the git-clean documentation, -x and -e documented .gitignore,
$GIT_DIR/info/excludes but neglected to mention the file pointed to by
core.excludesFile.
Remove specific list of files and, instead, reference gitignore(5)
documentation so that information is consolidated and the git-clean
documentation is more precise.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca> Helped-by: Martin Ågren <martin.agren@gmail.com> Helped-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Denton Liu <liu.denton@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
config: document --type=color output is a complete line
Even though the newer "--type=color" option to "git config" is meant
to be upward compatible with the traditional "--get-color" option,
unlike the latter, its output is not an incomplete line that lack
the LF at the end. That makes it consistent with output of other
types like "git config --type=bool".
Document it, as it sometimes surprises unsuspecting users.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Unify RPC code for smart http in protocol v0/v1 and v2, which fixes
a bug in the latter (lack of authentication retry) and generally
improves the code base.
* jt/http-auth-proto-v2-fix:
remote-curl: use post_rpc() for protocol v2 also
remote-curl: refactor reading into rpc_state's buf
remote-curl: reduce scope of rpc_state.result
remote-curl: reduce scope of rpc_state.stdin_preamble
remote-curl: reduce scope of rpc_state.argv
"git diff --no-index" may still want to access Git goodies like
--ext-diff and --textconv, but so far these have been ignored,
which has been corrected.
* jk/diff-no-index-initialize:
diff: reuse diff setup for --no-index case
* jk/unused-params:
ref-filter: drop unused "sz" parameters
ref-filter: drop unused "obj" parameters
ref-filter: drop unused buf/sz pairs
files-backend: drop refs parameter from split_symref_update()
pack-objects: drop unused parameter from oe_map_new_pack()
merge-recursive: drop several unused parameters
diff: drop complete_rewrite parameter from run_external_diff()
diff: drop unused emit data parameter from sane_truncate_line()
diff: drop unused color reset parameters
diff: drop options parameter from diffcore_fix_diff_index()
"git prune" has been taught to take advantage of reachability
bitmap when able.
* jk/prune-optim:
t5304: rename "sha1" variables to "oid"
prune: check SEEN flag for reachability
prune: use bitmaps for reachability traversal
prune: lazily perform reachability traversal
Output from "diff --cc" did not show the original paths when the
merge involved renames. A new option adds the paths in the
original trees to the output.
Update the implementation of pack-redundant for performance in a
repository with many packfiles.
* sc/pack-redundant:
pack-redundant: consistent sort method
pack-redundant: rename pack_list.all_objects
pack-redundant: new algorithm to find min packs
pack-redundant: delete redundant code
pack-redundant: delay creation of unique_objects
t5323: test cases for git-pack-redundant
The %(trailers) formatter in "git log --format=..." now allows to
optionally pick trailers selectively by keyword, show only values,
etc.
* aw/pretty-trailers:
pretty: add support for separator option in %(trailers)
strbuf: separate callback for strbuf_expand:ing literals
pretty: add support for "valueonly" option in %(trailers)
pretty: allow showing specific trailers
pretty: single return path in %(trailers) handling
pretty: allow %(trailers) options with explicit value
doc: group pretty-format.txt placeholders descriptions
The diff machinery, one of the oldest parts of the system, which
long predates the parse-options API, uses fairly long and complex
handcrafted option parser. This is being rewritten to use the
parse-options API.
* nd/diff-parseopt:
diff.c: convert --raw
diff.c: convert -W|--[no-]function-context
diff.c: convert -U|--unified
diff.c: convert -u|-p|--patch
diff.c: prepare to use parse_options() for parsing
diff.h: avoid bit fields in struct diff_flags
diff.h: keep forward struct declarations sorted
parse-options: allow ll_callback with OPTION_CALLBACK
parse-options: avoid magic return codes
parse-options: stop abusing 'callback' for lowlevel callbacks
parse-options: add OPT_BITOP()
parse-options: disable option abbreviation with PARSE_OPT_KEEP_UNKNOWN
parse-options: add one-shot mode
parse-options.h: remove extern on function prototypes
"git checkout --no-overlay" can be used to trigger a new mode of
checking out paths out of the tree-ish, that allows paths that
match the pathspec that are in the current index and working tree
and are not in the tree-ish.
* tg/checkout-no-overlay:
revert "checkout: introduce checkout.overlayMode config"
checkout: introduce checkout.overlayMode config
checkout: introduce --{,no-}overlay option
checkout: factor out mark_cache_entry_for_checkout function
checkout: clarify comment
read-cache: add invalidate parameter to remove_marked_cache_entries
entry: support CE_WT_REMOVE flag in checkout_entry
entry: factor out unlink_entry function
move worktree tests to t24*
Our compat/bswap.h lacks the usual preprocessor guards against multiple
inclusion. This usually isn't an issue since it only gets included from
git-compat-util.h, which has its own guards. But it would produce
redeclaration errors if any file included it separately.
Our hdr-check target would complain about this, except that it currently
skips items in compat/ entirely.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Makefile: fix 'hdr-check' when GCRYPT not installed
If the GCRYPT_SHA256 build variable is not set, then the 'hdr-check'
target complains about the missing <gcrypt.h> header file. Add the
'sha256/gcrypt.h' header file to the exception list, if the build
variable is not defined. While here, replace the 'xdiff%' filter
pattern with 'xdiff/%' (and similarly for the compat pattern) since
the original pattern inadvertently excluded the 'xdiff-interface.h'
header.
Signed-off-by: Ramsay Jones <ramsay@ramsayjones.plus.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-reset.txt contained a missing "a" and "wrt". Fix the missing "a" for
correctness and replace "wrt" with "with respect to" so that the
documentation is not so cryptic.
Signed-off-by: Denton Liu <liu.denton@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
fsck: always compute USED flags for unreachable objects
The --connectivity-only option avoids opening every object, and instead
just marks reachable objects with a flag and compares this to the set
of all objects. This strategy is discussed in more detail in 3e3f8bd608
(fsck: prepare dummy objects for --connectivity-check, 2017-01-17).
This means that we report _every_ unreachable object as dangling.
Whereas in a full fsck, we'd have actually opened and parsed each of
those unreachable objects, marking their child objects with the USED
flag, to mean "this was mentioned by another object". And thus we can
report only the tip of an unreachable segment of the object graph as
dangling.
You can see this difference with a trivial example:
tree=$(git hash-object -t tree -w /dev/null)
one=$(echo one | git commit-tree $tree)
two=$(echo two | git commit-tree -p $one $tree)
Running `git fsck` will report only $two as dangling, but with
--connectivity-only, both commits (and the tree) are reported. Likewise,
using --lost-found would write all three objects.
We can make --connectivity-only work like the normal case by taking a
separate pass over the unreachable objects, parsing them and marking
objects they refer to as USED. That still avoids parsing any blobs,
though we do pay the cost to access any unreachable commits and trees
(which may or may not be noticeable, depending on how many you have).
If neither --dangling nor --lost-found is in effect, then we can skip
this step entirely, just like we do now. That makes "--connectivity-only
--no-dangling" just as fast as the current "--connectivity-only". I.e.,
we do the correct thing always, but you can still tweak the options to
make it faster if you don't care about dangling objects.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
This fixes a regression in 7c0fe330d5 (rev-list: handle missing tree
objects properly, 2018-10-05) where rev-list will now complain about the
empty tree when it doesn't physically exist on disk.
Before that commit, we relied on the traversal code in list-objects.c to
walk through the trees. Since it uses parse_tree(), we'd do a normal
object lookup that includes looking in the set of "cached" objects
(which is where our magic internal empty-tree kicks in).
After that commit, we instead tell list-objects.c not to die on any
missing trees, and we check them ourselves using has_object_file(). But
that function uses OBJECT_INFO_SKIP_CACHED, which means we won't use our
internal empty tree.
This normally wouldn't come up. For most operations, Git will try to
write out the empty tree object as it would any other object. And
pack-objects in a push or fetch will send the empty tree (even if it's
virtual on the sending side). However, there are cases where this can
matter. One I found in the wild:
1. The root tree of a commit became empty by deleting all files,
without using an index. In this case it was done using libgit2's
tree builder API, but as the included test shows, it can easily be
done with regular git using hash-object.
The resulting repo works OK, as we'd avoid walking over our own
reachable commits for a connectivity check.
2. Cloning with --reference pointing to the repository from (1) can
trigger the problem, because we tell the other side we already have
that commit (and hence the empty tree), but then walk over it
during the connectivity check (where we complain about it missing).
Arguably the workflow in step (1) should be more careful about writing
the empty tree object if we're referencing it. But this workflow did
work prior to 7c0fe330d5, so let's restore it.
This patch makes the minimal fix, which is to swap out a direct call to
oid_object_info_extended(), minus the SKIP_CACHED flag, instead of
calling has_object_file(). This is all that has_object_file() is doing
under the hood. And there's little danger of unrelated fallout from
other unexpected "cached" objects, since there's only one call site that
ends such a cached object, and it's in git-blame.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Makefile: use `git ls-files` to list header files, if possible
In d85b0dff72 (Makefile: use `find` to determine static header
dependencies, 2014-08-25), we switched from a static list of header
files to a dynamically-generated one, asking `find` to enumerate them.
Back in those days, we did not use `$(LIB_H)` by default, and many a
`make` implementation seems smart enough not to run that `find` command
in that case, so it was deemed okay to run `find` for special targets
requiring this macro.
However, as of ebb7baf02f (Makefile: add a hdr-check target,
2018-09-19), $(LIB_H) is part of a global rule and therefore must be
expanded. Meaning: this `find` command has to be run upon every
`make` invocation. In the presence of many a worktree, this can tax the
developers' patience quite a bit.
Even in the absence of worktrees or other untracked files and
directories, the cost of I/O to generate that list of header files is
simply a lot larger than a simple `git ls-files` call.
Therefore, just like in 335339758c (Makefile: ask "ls-files" to list
source files if available, 2011-10-18), we now prefer to use `git
ls-files` to enumerate the header files to enumerating them via `find`,
falling back to the latter if the former failed (which would be the case
e.g. in a worktree that was extracted from a source .tar file rather
than from a clone of Git's sources).
This has one notable consequence: we no longer include `command-list.h`
in `LIB_H`, as it is a generated file, not a tracked one, but that is
easily worked around. Of the three sites that use `LIB_H`, two
(`LOCALIZED_C` and `CHK_HDRS`) already handle generated headers
separately. In the third, the computed-dependency fallback, we can just
add in a reference to $(GENERATED_H).
Likewise, we no longer include not-yet-tracked header files in `LIB_H`.
Given the speed improvements, these consequences seem a comparably small
price to pay.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Acked-by: Ramsay Jones <ramsay@ramsayjones.plus.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The default SIGPIPE behavior can be useful for a command that generates
a lot of output: if the receiver of our output goes away, we'll be
notified asynchronously to stop generating it (typically by killing the
program).
But for a command like fetch, which is primarily concerned with
receiving data and writing it to disk, an unexpected SIGPIPE can be
awkward. We're already checking the return value of all of our write()
calls, and dying due to the signal takes away our chance to gracefully
handle the error.
On Linux, we wouldn't generally see SIGPIPE at all during fetch. If the
other side of the network connection hangs up, we'll see ECONNRESET. But
on OS X, we get a SIGPIPE, and the process is killed. This causes t5570
to racily fail, as we sometimes die by signal (instead of the expected
die() call) when the server side hangs up.
Let's ignore SIGPIPE during the network portion of the fetch, which will
cause our write() to return EPIPE, giving us consistent behavior across
platforms.
This fixes the test flakiness, but note that it stops short of fixing
the larger problem. The server side hit a fatal error, sent us an "ERR"
packet, and then hung up. We notice the failure because we're trying to
write to a closed socket. But by dying immediately, we never actually
read the ERR packet and report its content to the user. This is a (racy)
problem on all platforms. So this patch lays the groundwork from which
that problem might be fixed consistently, but it doesn't actually fix
it.
Note the placement of the SIGPIPE handling. The absolute minimal change
would be to ignore SIGPIPE only when we're writing. But twiddling the
signal handler for each write call is inefficient and maintenance
burden. On the opposite end of the spectrum, we could simply declare
that fetch does not need SIGPIPE handling, since it doesn't generate a
lot of output, and we could just ignore it at the start of cmd_fetch().
This patch takes a middle ground. It ignores SIGPIPE during the network
operation (which is admittedly most of the program, since the actual
network operations are all done under the hood by the transport code).
So it's still pretty coarse.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The write_or_die() function has one quirk that a caller might not
expect: when it sees EPIPE from the write() call, it translates that
into a death by SIGPIPE. This doesn't change the overall behavior (the
program exits either way), but it does potentially confuse test scripts
looking for a non-signal exit code.
Let's switch away from using write_or_die() in a few code paths, which
will give us more consistent exit codes. It also gives us the
opportunity to write more descriptive error messages, since we have
context that write_or_die() does not.
Note that this won't do much by itself, since we'd typically be killed
by SIGPIPE before write_or_die() even gets a chance to do its thing.
That will be addressed in the next patch.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
built-in rebase: set ORIG_HEAD just once, before the rebase
Technically, the scripted version set ORIG_HEAD only in two spots (which
really could have been one, because it called `git checkout $onto^0` to
start the rebase and also if it could take a shortcut, and in both cases
it called `git update-ref $orig_head`).
Practically, it *implicitly* reset ORIG_HEAD whenever `git reset --hard`
was called.
However, what we really want is that it is set exactly once, at the
beginning of the rebase.
So let's do that.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
built-in rebase: demonstrate that ORIG_HEAD is not set correctly
The ORIG_HEAD pseudo ref is supposed to refer to the original,
pre-rebase state after a successful rebase. Let's add a regression test
to prove that this regressed: With GIT_TEST_REBASE_USE_BUILTIN=false,
this test case passes, with GIT_TEST_REBASE_USE_BUILTIN=true (or unset),
it fails.
Reported by Nazri Ramliy.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
built-in rebase: no need to check out `onto` twice
In the case that the rebase boils down to a fast-forward, the built-in
rebase reset the working tree twice: once to start the rebase at `onto`,
then realizing that the original (pre-rebase) HEAD was an ancestor and
we basically already fast-forwarded to the post-rebase HEAD,
`reset_head()` was called to update the original ref and to point HEAD
back to it.
That second `reset_head()` call does not need to touch the working tree,
though, as it does not change the actual tip commit (and therefore the
working tree should stay unchanged anyway): only the ref needs to be
updated (because the rebase detached the HEAD, and we want to go back to
the branch on which the rebase was started).
But that second `reset_head()` was called without the flag to leave the
working tree alone (the reason: when that call was introduced, that flag
was not yet even thought of). Let's avoid that unnecessary work by
passing that flag.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --stress option currently accepts an argument, but it is confusing
to at least this user that the argument does not define the maximal
number of stress iterations, but instead the number of jobs to run in
parallel per stress iteration.
Let's introduce a separate option for that, whose name makes it more
obvious what it is about, and let --stress=<N> error out with a helpful
suggestion about the two options tha could possibly have been meant.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
When transmitting and receiving POSTs for protocol v0 and v1,
remote-curl uses post_rpc() (and associated functions), but when doing
the same for protocol v2, it uses a separate set of functions
(proxy_rpc() and others). Besides duplication of code, this has caused
at least one bug: the auth retry mechanism that was implemented in v0/v1
was not implemented in v2.
To fix this issue and avoid it in the future, make remote-curl also use
post_rpc() when handling protocol v2. Because line lengths are written
to the HTTP request in protocol v2 (unlike in protocol v0/v1), this
necessitates changes in post_rpc() and some of the functions it uses;
perform these changes too.
A test has been included to ensure that the code for both the unchunked
and chunked variants of the HTTP request is exercised.
Note: stateless_connect() has been updated to use the lower-level packet
reading functions instead of struct packet_reader. The low-level control
is necessary here because we cannot change the destination buffer of
struct packet_reader while it is being used; struct packet_buffer has a
peeking mechanism which relies on the destination buffer being present
in between a peek and a read.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
setup: fix memory leaks with `struct repository_format`
After we set up a `struct repository_format`, it owns various pieces of
allocated memory. We then either use those members, because we decide we
want to use the "candidate" repository format, or we discard the
candidate / scratch space. In the first case, we transfer ownership of
the memory to a few global variables. In the latter case, we just
silently drop the struct and end up leaking memory.
Introduce an initialization macro `REPOSITORY_FORMAT_INIT` and a
function `clear_repository_format()`, to be used on each side of
`read_repository_format()`. To have a clear and simple memory ownership,
let all users of `struct repository_format` duplicate the strings that
they take from it, rather than stealing the pointers.
Call `clear_...()` at the start of `read_...()` instead of just zeroing
the struct, since we sometimes enter the function multiple times. Thus,
it is important to initialize the struct before calling `read_...()`, so
document that. It's also important because we might not even call
`read_...()` before we call `clear_...()`, see, e.g., builtin/init-db.c.
Teach `read_...()` to clear the struct on error, so that it is reset to
a safe state, and document this. (In `setup_git_directory_gently()`, we
look at `repo_fmt.hash_algo` even if `repo_fmt.version` is -1, which we
weren't actually supposed to do per the API. After this commit, that's
ok.)
We inherit the existing code's combining "error" and "no version found".
Both are signalled through `version == -1` and now both cause us to
clear any partial configuration we have picked up. For "extensions.*",
that's fine, since they require a positive version number. For
"core.bare" and "core.worktree", we're already verifying that we have a
non-negative version number before using them.
Signed-off-by: Martin Ågren <martin.agren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>