As a short-hand, we extract this flag into the local
variable "name_addr_only". It's more accurate to simply
negate this and refer to it as "want_date", which will be
less confusing when we add more NO_* flags.
While we're touching this part of the code, let's move the
call to ident_default_date() only when we are actually going
to use it, not when we have NO_DATE set, or when we get a
date from the environment.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
There's on point in printing the name, since it is by
definition the empty string if we have reached this code
path. Instead, let's be more clear that we are complaining
about the empty name, but still show the email address that
it is attached to (since that may provide some context to
the user).
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Avoid sorting if references are added to ref_cache in order
The old code allowed many references to be efficiently added to a
single directory, because it just appended the references to the
containing directory unsorted without doing any searching (and
therefore without requiring any intermediate sorting). But the old
code was inefficient when a large number of subdirectories were added
to a directory, because the directory always had to be searched to see
if the new subdirectory already existed, and this search required the
directory to be sorted first. The same was repeated for every new
subdirectory, so the time scaled like O(N^2), where N is the number of
subdirectories within a single directory.
In practice, references are often added to the ref_cache in
lexicographic order, for example when reading the packed-refs file.
So build some intelligence into add_entry_to_dir() to optimize for the
case of references and/or subdirectories being added in lexicographic
order: if the existing entries were already sorted, and the new entry
comes after the last existing entry, then adjust ref_dir::sorted to
reflect the fact that the ref_dir is still sorted.
Thanks to Peff for pointing out the performance regression that
inspired this change.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
If stderr isn't a tty, we shouldn't be printing incremental progress
messages. In particular, this affects 'git checkout -f . >&logfile'
unless you provided -q. And git-new-workdir has no way to provide -q.
It would probably be better to have progress.c check isatty(2) all the time,
but that wouldn't allow things like 'git push --progress' to force progress
reporting to on, so I won't try to solve the general case right now.
Actual fix suggested by Jeff King.
Signed-off-by: Avery Pennarun <apenwarr@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
osxkeychain: pull make config from top-level directory
The default compiler and cflags were mostly "works for me"
when I built the original version. We need to be much less
careful here than usual, because we know we are building
only on OS X. But it's only polite to at least respect the
CFLAGS and CC definitions that the user may have provided
earlier.
While we're at it, let's update our definitions and rules to
be more like the top-level Makefile; default our CFLAGS to
include -O2, and make sure we use CFLAGS and LDFLAGS when
linking.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 4435968 started sorting heads fed to fetch-pack so
that later commits could use more optimized algorithms;
commit 7db8d53 switched the remove_duplicates function to
such an algorithm.
Of course, the sorting is more effective if you do it
_before_ the algorithm in question.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
xdiff: import new 32-bit version of count_masked_bytes()
Import the latest 32-bit implementation of count_masked_bytes() from
Linux (arch/x86/include/asm/word-at-a-time.h). It's shorter and avoids
overflows and negative numbers.
This fixes test failures on 32-bit, where negative partial results had
been shifted right using the "wrong" method (logical shift right instead
of arithmetic short right). The compiler is free to chose the method,
so it was only wrong in the sense that it didn't work as intended by us.
Reported-by: Øyvind A. Holm <sunny@sunbase.org> Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>
xdiff: avoid more compiler warnings with XDL_FAST_HASH on 32-bit machines
Hide literals that can cause compiler warnings for 32-bit architectures in
expressions that evaluate to small numbers there. Some compilers warn that
0x0001020304050608 won't fit into a 32-bit long, others that shifting right
by 56 bits clears a 32-bit value completely.
The correct values are calculated in the 64-bit case, which is all that matters
in this if-branch.
Reported-by: Øyvind A. Holm <sunny@sunbase.org> Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Acked-by: Thomas Rast <trast@student.ethz.ch> Signed-off-by: Junio C Hamano <gitster@pobox.com>
xdiff: avoid compiler warnings with XDL_FAST_HASH on 32-bit machines
Import macro REPEAT_BYTE from Linux (arch/x86/include/asm/word-at-a-time.h)
to avoid 64-bit integer literals, which cause some 32-bit compilers to
print warnings.
Reported-by: Øyvind A. Holm <sunny@sunbase.org> Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The search_ref_dir() function is about looking up an existing ref_entry in
a sorted array of ref_entry stored in dir->entries, but it still allocates
a new ref_entry and frees it before returning. This is only because the
call to bsearch(3) was coded in a suboptimal way. Unlike the comparison
function given to qsort(3), the first parameter to its comparison function
does not need to point at an object that is shaped like an element in the
array.
Introduce a new comparison function that takes a counted string as the key
and an element in an array of ref_entry and give it to bsearch(), so that
we do not have to allocate a new ref_entry that we will never return to
the caller anyway.
refs: use strings directly in find_containing_dir()
Convert the parameter subdirname of search_for_subdir() to a
length-limted string and then simply pass the interesting slice of the
refname from find_containing_dir(), thereby avoiding to duplicate the
string.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>
We have a list of refs that we want to compare against the
"match" array. The current code searches the match list
linearly, giving quadratic behavior over the number of refs
when you want to fetch all of them.
Instead, we can compare the lists as we go, giving us linear
behavior.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Having the list sorted means we can avoid some quadratic
algorithms when comparing lists.
These should typically be sorted already, but they do come
from the remote, so let's be extra careful. Our ref-sorting
implementation does a mergesort, so we do not have to care
about performance degrading in the common case that the list
is already sorted.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
fetch-pack: avoid quadratic behavior in remove_duplicates
We remove duplicate entries from the list of refs we are
fed in fetch-pack. The original algorithm is quadratic over
the number of refs, but since the list is now guaranteed to
be sorted, we can do it in linear time.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
There's no reason to preserve the incoming order of the
heads we're requested to fetch. By having them sorted, we
can replace some of the quadratic algorithms with linear
ones.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
cmd_fetch_pack(): respect constness of argv parameter
The old code cast away the constness of the strings passed to the
function in argument argv[], which could result in their being
modified by filter_refs(). Fix by copying reference names from argv
and putting them into our own array (similarly to how refnames passed
to stdin were already handled).
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
avoid segfault when reading header of malformed commits
If a commit object has a header line at the end of the
buffer that is missing its newline (or if it appears so
because the content on the header line contains a stray
NUL), then git will segfault.
Interestingly, this case is explicitly handled and we do
correctly scan the final line for the header we are looking
for. But if we don't find it, we will dereference NULL while
trying to look at the next line.
Git will never generate such a commit, but it's good to be
defensive. We could die() in such a case, but since it's
easy enough to handle it gracefully, let's just issue a
warning and continue (so you could still view such a commit
with "git show", though you might be missing headers after
the NUL).
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
pretty: avoid buffer overflow in format_person_part
When we parse the name and email from a commit to
pretty-print them, we usually can just put the result
directly into our strbuf result. However, if we are going to
use the mailmap, then we must first copy them into a
NUL-terminated buffer to feed to the mailmap machinery.
We did so by using strlcpy into a static buffer, but we used
it wrong. We fed it the length of the substring we wanted to
copy, but never checked that that length was less than the
size of the destination buffer.
The simplest fix is to just use snprintf to copy the
substring properly while still respecting the destination
buffer's size. It might seem like replacing the static
buffer with a strbuf would help, but we need to feed a
static buffer to the mailmap machinery anyway, so there's
not much benefit to handling arbitrary sizes.
A more ideal solution would be for mailmap to grow an
interface that:
1. Takes a pointer and length combination, instead of
assuming a NUL-terminated string.
2. Returns a pointer to the mailmap's allocated string,
rather than copying it into the buffer.
Then we could avoid the need for an extra buffer entirely.
However, doing this would involve a lot of refactoring of
mailmap and of string_list (which mailmap uses to store the
map itself). For now, let's do the simplest thing to fix the
bug.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 4b340cf split the logic to parse an ident line out of
pretty.c's format_person_part. But in doing so, it
accidentally introduced an off-by-one error that caused it
to think that single-character names were invalid.
This manifested itself as the "%an" format failing to show
anything at all for a single-character name.
Reported-by: Brian Turner <bturner@atlassian.com> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The get_patch_filename function expects a commit argument
and uses it to get the sanitized subject line when making a
patch filename. However, we also want to use this same
function for the cover letter, which does not have a commit
object. The current solution is to create a fake commit with
the subject "cover letter". Instead, let's make the
get_patch_filename interface more flexibile, and allow
passing a direct subject.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Usually these values get fed to fmt_ident, which will trim
any cruft anyway, but there are a few code paths which use
them directly. Let's clean them up for the benefit of those
callers. Furthermore, fmt_ident will look at the pre-trimmed
value and decide whether to invoke ERROR_ON_NO_NAME; this
check can be fooled by a name consisting only of spaces.
Note that we only bother to clean up when we are pulling the
information from gecos or from system files. Any other value
comes from a config file, where we will have cleaned up
accidental whitespace already.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that we accept arbitrary-sized names and email
addresses, the only remaining limit is in the actual
formatting of the names into a buffer. The current limit is
1000 characters, which is not likely to be reached, but
using a strbuf is one less error condition we have to worry
about.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
ident: use full dns names to generate email addresses
When we construct an email address from the username and
hostname, we generate the host part of the email with this
procedure:
1. add the result of gethostname
2. if it has a dot, ok, it's fully qualified
3. if not, then look up the unqualified hostname via
gethostbyname; take the domain name of the result and
append it to the hostname
Step 3 can actually produce a bogus result, as the name
returned by gethostbyname may not be related to the hostname
we fed it (e.g., consider a machine "foo" with names
"foo.one.example.com" and "bar.two.example.com"; we may have
the latter returned and generate the bogus name
"foo.two.example.com").
This patch simply uses the full hostname returned by
gethostbyname. In the common case that the first part is the
same as the unqualified hostname, the behavior is identical.
And in the case that it is not the same, we are much more
likely to be generating a valid name.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
ident: report passwd errors with a more friendly message
When getpwuid fails, we give a cute but cryptic message.
While it makes sense if you know that getpwuid or identity
functions are being called, this code is triggered behind
the scenes by quite a few git commands these days (e.g.,
receive-pack on a remote server might use it for a reflog;
the current message is hard to distinguish from an
authentication error). Let's switch to something that gives
a little more context.
While we're at it, we can factor out all of the
cut-and-pastes of the "you don't exist" message into a
wrapper function. Rather than provide xgetpwuid, let's make
it even more specific to just getting the passwd entry for
the current uid. That's the only way we use getpwuid anyway,
and it lets us make an even more specific error message.
The current message also fails to mention errno. While the
usual cause for getpwuid failing is that the user does not
exist, mentioning errno makes it easier to diagnose these
problems. Note that POSIX specifies that errno remain
untouched if the passwd entry does not exist (but will be
set on actual errors), whereas some systems will return
ENOENT or similar for a missing entry. We handle both cases
in our wrapper.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
drop length limitations on gecos-derived names and emails
When we pull the user's name from the GECOS field of the
passwd file (or generate an email address based on their
username and hostname), we put the result into a
static buffer. While it's extremely unlikely that anybody
ever hit these limits (after all, in such a case their
parents must have hated them), we still had to deal with the
error cases in our code.
Converting these static buffers to strbufs lets us simplify
the code and drop some error messages from the documentation
that have confused some users.
The conversion is mostly mechanical: replace string copies
with strbuf equivalents, and access the strbuf.buf directly.
There are a few exceptions:
- copy_gecos and copy_email are the big winners in code
reduction (since they no longer have to manage the
string length manually)
- git_ident_config wants to replace old versions of
the default name (e.g., if we read the config multiple
times), so it must reset+add to the strbuf instead of
just adding
Note that there is still one length limitation: the
gethostname interface requires us to provide a static
buffer, so we arbitrarily choose 1024 bytes for the
hostname.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
ident: don't write fallback username into git_default_name
The fmt_ident function gets a flag that tells us whether to
die if the name field is blank. If it is blank and we don't
die, then we fall back to the username from the passwd file.
The current code writes the value into git_default_name.
However, that's not necessarily correct, as the empty value
might have come from git_default_name, or it might have been
passed in. This leads to two potential problems:
1. If we are overriding an empty name in the passed-in
value, then we may be overwriting a perfectly good name
(from gitconfig or gecos) in the git_default_name
buffer. Later calls to fmt_ident will end up using the
fallback name, even though a better name was available.
2. If we override an empty gecos name, we end up with the
fallback name in git_default_name. A later call that
uses IDENT_ERROR_ON_NO_NAME will see the fallback name
and think that it is a good name, instead of producing
an error. In other words, a blank gecos name would
cause an error with this code:
because in the latter case, the first call has polluted
the name buffer.
Instead, let's make the fallback a per-invocation variable.
We can just use the pw->pw_name string directly, since it
only needs to persist through the rest of the function (and
we don't do any other getpwent calls).
Note that while this solves (1) for future invocations of
fmt_indent, the current invocation might use the fallback
when it could in theory load a better value from
git_default_name. However, by not passing
IDENT_ERROR_ON_NO_NAME, the caller is indicating that it
does not care too much about the name, anyway, so we don't
bother; this is primarily about protecting future callers
who do care.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
format-patch: use default email for generating message ids
We try to generate a sane message id for cover letters and
threading by appending some changing bits to the front of
the user's email address. The current code parses the email
out of the results of git_committer_info, but we can do this
much more easily by just calling ident_default_email
ourselves.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
We use fgets to read the /etc/mailname file, which means we
will typically end up with an extra newline in our
git_default_email. Most of the time this doesn't matter, as
fmt_ident will skip it as cruft, but there is one code path
that accesses it directly (in http-push.c:lock_remote).
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
There's no reason anybody outside of ident.c should access
these directly (they should use the new accessors which make
sure the variables are initialized), so we can make them
file-scope statics.
While we're at it, move user_ident_explicitly_given into
ident.c; while still globally visible, it makes more sense
to reside with the ident code.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
There's no reason for this to be in config, except that once
upon a time all of the config parsing was there. It makes
more sense to keep the ident code together.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
fmt-merge-msg: don't use static buffer in record_person
The record_person function just parses out the "name" field
of the person line in a commit and adds it to a string_list.
The only reason we need an extra buffer is that the
string_list functions require a NUL-terminated string.
Instead of the static buffer, we can just allocate a
temporary NUL-terminated copy. In addition to removing a
useless limit, this removes the only user of MAX_GITNAME
outside of ident.c.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function sets up the default name, email, and date, and
is not publicly available. Let's split it into three public
functions so that callers can get just the parts they need.
While we're at it, let's change the interface to simple
accessors. The original function was called only by fmt_ident,
and contained logic for "if we already have some other
value, don't load the default" which properly belongs in
fmt_ident.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
When reading patterns from a file, we pass the lines as allocated string
buffers to append_grep_pat() and never free them. That's not a problem
because they are needed until the program ends anyway.
However, now that the function duplicates the pattern string, we can
reuse the strbuf after calling that function. This simplifies the code
a bit and plugs a minor memory leak.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>
By Jens Lehmann (1) and Johannes Sixt (1)
* maint:
Consistently use "superproject" instead of "supermodule"
t3404: begin "exchange commits with -p" test with correct preconditions
Currently, patterns that contain newline characters don't match anything
when given to git grep. Regular grep(1) interprets patterns as lists of
newline separated search strings instead.
Implement this functionality by creating and inserting extra grep_pat
structures for patterns consisting of multiple lines when appending to
the pattern lists. For simplicity, all pattern strings are duplicated.
The original pattern is truncated in place to make it contain only the
first line.
Requested-by: Torne (Richard Coles) <torne@google.com> Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Consistently use "superproject" instead of "supermodule"
We fairly consistently say "superproject" and never "supermodule" these
days. But there are seven occurrences of "supermodule" left in the current
work tree. Three appear in Release Notes for 1.5.3 and 1.7.7, three in
test names and one in a C-code comment.
Replace all occurrences of "supermodule" outside of the Release Notes
(which shouldn't be changed after the fact) with "superproject" for
consistency.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t3404: begin "exchange commits with -p" test with correct preconditions
The test case shows a bug in 'rebase -p', but even if the bug were fixed
the test would fail because it did not ensure that the preconditions match
the postconditions that were checked. Insert the suitable 'git checkout'.
Signed-off-by: Johannes Sixt <j6t@kdbg.org> Acked-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
completion: add support for backwards compatibility
Some people might be relying on _git and _gitk to define custom aliases,
unfortunately, commit 6b179ad (completion: add new __git_complete
helper) broke that support.
"bash: [: 1: unary operator expected"
This can be easily fixed by using __git_complete, but it's not meant to
be public.
Although _git and _gitk are probably not meant to be public, it's easy
to keep having support for them by having a wrapper to the proper
new function that is fully functional.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t/Makefile: retain cache t/.prove across prove runs
prove(1) can write a summary of its test results and timings into a
cache file, t/.prove, then use this information during later runs for
various purposes. But deleting t/.prove after every test run defeats
this purpose. So do not delete t/.prove as part of "make
DEFAILT_TEST_TARGET=prove test". (Continue to delete the file on
"make clean".)
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
pack-objects: refactor write_object() into helper functions
The function first decides if we want to copy data taken from existing
pack verbatim or we want to encode the data ourselves for the packfile
we are creating and then carries out the decision. Separate the latter
phase into two helper functions, one for the case the data is reused,
the other for the case the data is produced anew.
A little twist is that it can later turn out that we cannot reuse the
data after we initially decide to do so; in such a case, the "reuse"
helper makes a call to "generate" helper. It is easier to follow than
the current fallback code that uses "goto" inside a single large
function.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test intends to rebase a branchy history onto a later commit, but it
forgot to reset HEAD back to an earlier commit before it set up the side
branches. In the end, every "rebased" commit was only a fast-forward and
the 'rebase -p' did not change the commit graph at all. Insert the missing
checkout that moves to an earlier commit.
Signed-off-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
rev-parse doc: --git-dir does not always show a relative path
The description was misleading because it lead the reader to believe
that --git-dir would always show a relative path when, in fact, the
actual behaviour does not guarantee this.
Rather, it was intended that the advice be given that if a relative
path is shown, then the path is relative to the current working
directory and not some other directory (for example, the root of the
working tree).
Signed-off-by: Jon Seymour <jon.seymour@gmail.com> Acked-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is no need to build a copy of the relevant part of the string just
to make sure we have a NUL-terminated string. We can simply pass the
length of the interesting part to dwim_ref() instead.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Text from "git cmd --help" are getting prepared for i18n.
By Nguyễn Thái Ngọc Duy
* nd/i18n-parseopt:
i18n: apply: mark parseopt strings for translation
i18n: parseopt: lookup help and argument translations when showing usage
Simplifies the interface between the implementation of "blame" and
underlying xdiff engine, and removes a lot of unused or unnecessary code
from the latter.
By René Scharfe (6) and Ramsay Jones (1)
* rs/xdiff-lose-emit-func:
builtin/blame.c: Fix a "Using plain integer as NULL pointer" warning
xdiff: remove unused functions
xdiff: remove emit_func() and xdi_diff_hunks()
blame: factor out helper for calling xdi_diff()
blame: use hunk_func(), part 2
blame: use hunk_func(), part 1
xdiff: add hunk_func()
By Luke Diamand
* ld/git-p4-tags-and-labels:
git p4: fix bug when enabling tag import/export via config variables
git p4: fix bug when verbose enabled with tag export
git p4: add test for tag import/export enabled via config
When git svn rebase is performed after an unpushed merge, the
rebase operation follows both parents and replays both the user's
local commits and those from the merged branch. This is usually
not the intended behavior.
This patch adds support for the --preserve-merges/-p flag which
allows for a better workflow by re-applying merge commits as merges.
[ew: fixed a minor syntax error]
Signed-off-by: Avishay Lavie <avishay.lavie@gmail.com> Signed-off-by: Eric Wong <normalperson@yhbt.net>
queue_diff uses two strbufs, and at the end of the function
strbuf_reset was called. This only reset the length of the buffer -
any allocated memory was leaked. Using strbuf_release fixes this.
Signed-off-by: Bobby Powers <bobbypowers@gmail.com> Reviewed-by: René Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>
diff --no-index: reset temporary buffer lengths on directory iteration
Commit 875b91b (diff --no-index: use strbuf for temporary pathnames,
2012-04-25) introduced a regression when using diff --no-index with
directories. When iterating through a directory, the switch to strbuf
from heap-allocated char arrays caused paths to form like 'dir/file1',
'dir/file1file2', rather than 'dir/file1', 'dir/file2' as expected.
Avoid this by resetting the paths variables to their original length
before each iteration.
Signed-off-by: Bobby Powers <bobbypowers@gmail.com> Reviewed-by: René Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-sh-setup: define workaround wrappers before they are used
Recently we tweaked this scriptlet to let mingw port redefine "pwd" to
always return Windows-style path, but the code to do so came after the
first use of "pwd" to set up $GIT_DIR shell variable.
Move the block to define these workaround wrappers, so that everything
everything that executes when the scriptlet is dot-sourced uses the
replacements.
Noticed-by: Ramsay Jones Signed-off-by: Junio C Hamano <gitster@pobox.com>
Enables threading in index-pack to resolve base data in parallel.
By Nguyễn Thái Ngọc Duy (3) and Ramsay Jones (1)
* nd/threaded-index-pack:
index-pack: disable threading if NO_PREAD is defined
index-pack: support multithreaded delta resolving
index-pack: restructure pack processing into three main functions
compat/win32/pthread.h: Add an pthread_key_delete() implementation
Merge branch 'master' of git://github.com/git-l10n/git-po
By Ralf Thielow (6) and others
via Jiang Xin (3) and Ralf Thielow (1)
* 'master' of git://github.com/git-l10n/git-po:
l10n: zh_CN.po: translate 1 new message
l10n: de.po: translate one new message
l10n: de.po: unify translation of "ahead" and "behind"
l10n: de.po: collection of improvements
l10n: de.po: translate "remote" as "extern"
l10n: de.po: translate "track" as "beobachten"
l10n: add new members to German translation team
l10n: de.po: collection of suggestions
l10n: de.po: translate "bad" as "ungültig" ("invalid")
l10n: de.po: hopefully uncontroversial fixes
l10n: de.po: translate "bare" as "bloß"
l10n: Update git.pot (275 new, 15 removed messages)
l10n: Update git.pot (1 new messages)
Merge branch 'maint' of git://github.com/git-l10n/git-po into maint
By Ralf Thielow (6) and others
via Jiang Xin
* 'maint' of git://github.com/git-l10n/git-po:
l10n: zh_CN.po: translate 1 new message
l10n: de.po: translate one new message
l10n: de.po: unify translation of "ahead" and "behind"
l10n: de.po: collection of improvements
l10n: de.po: translate "remote" as "extern"
l10n: de.po: translate "track" as "beobachten"
l10n: add new members to German translation team
l10n: de.po: collection of suggestions
l10n: de.po: translate "bad" as "ungültig" ("invalid")
l10n: de.po: hopefully uncontroversial fixes
l10n: de.po: translate "bare" as "bloß"
l10n: Update git.pot (1 new messages)
Merge branch 'jk/maint-reflog-walk-count-vs-time' into maint
Gives a better DWIM behaviour for --pretty=format:%gd, "stash list", and
"log -g", depending on how the starting point ("master" vs "master@{0}" vs
"master@{now}") and date formatting options (e.g. "--date=iso") are given
on the command line.
By Jeff King (4) and Junio C Hamano (1)
* jk/maint-reflog-walk-count-vs-time:
reflog-walk: tell explicit --date=default from not having --date at all
reflog-walk: always make HEAD@{0} show indexed selectors
reflog-walk: clean up "flag" field of commit_reflog struct
log: respect date_mode_explicit with --format:%gd
t1411: add more selector index/date tests
By Jan Krüger (1) and Junio C Hamano (1)
* jk/maint-tformat-with-z:
log-tree: the previous one is still not quite right
log-tree: use custom line terminator in line termination mode
Merge branch 'js/checkout-detach-count' into maint
When checking out another commit from an already detached state, we used
to report all commits that are not reachable from any of the refs as
lossage, but some of them might be reachable from the new HEAD, and there
is no need to warn about them.
By Johannes Sixt
* js/checkout-detach-count:
checkout (detached): truncate list of orphaned commits at the new HEAD
t2020-checkout-detach: check for the number of orphaned commits
Merge branch 'ef/maint-clone-progress-fix' into maint
Some time ago, "git clone" lost the progress output for its "checkout"
phase; when run without any "--quiet" option, it should give progress to
the lengthy operation.
By Erik Faye-Lund
* ef/maint-clone-progress-fix:
clone: fix progress-regression