git rebase -i: add static check for commands and SHA-1
Check before the start of the rebasing if the commands exists, and for
the commands expecting a SHA-1, check if the SHA-1 is present and
corresponds to a commit. In case of error, print the error, stop git
rebase and prompt the user to fix with 'git rebase --edit-todo' or to
abort.
This allows to avoid doing half of a rebase before finding an error
and giving back what's left of the todo list to the user and prompt
him to fix when it might be too late for him to do so (he might have
to abort and restart the rebase).
Signed-off-by: Galan Rémi <remi.galan-alfonso@ensimag.grenoble-inp.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Check if commits were removed (i.e. a line was deleted) and print
warnings or stop git rebase depending on the value of the
configuration variable rebase.missingCommitsCheck.
This patch gives the user the possibility to avoid silent loss of
information (losing a commit through deleting the line in this case)
if he wants.
Add the configuration variable rebase.missingCommitsCheck.
- When unset or set to "ignore", no checking is done.
- When set to "warn", the commits are checked, warnings are
displayed but git rebase still proceeds.
- When set to "error", the commits are checked, warnings are
displayed and the rebase is stopped.
(The user can then use 'git rebase --edit-todo' and
'git rebase --continue', or 'git rebase --abort')
rebase.missingCommitsCheck defaults to "ignore".
Signed-off-by: Galan Rémi <remi.galan-alfonso@ensimag.grenoble-inp.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-rebase -i: add command "drop" to remove a commit
Instead of removing a line to remove the commit, you can use the
command "drop" (just like "pick" or "edit"). It has the same effect as
deleting the line (removing the commit) except that you keep a visual
trace of your actions, allowing a better control and reducing the
possibility of removing a commit by mistake.
Signed-off-by: Galan Rémi <remi.galan-alfonso@ensimag.grenoble-inp.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
When t7063 starts, it runs "update-index --untracked-cache"
to see if we support the untracked cache. Its output goes
straight to stderr, even if the test is not run with "-v".
Let's wrap it in a prereq that will hide the output by
default, but show it with "-v".
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git rev-list --objects $old --not --all" to see if everything that
is reachable from $old is already connected to the existing refs
was very inefficient.
* jk/still-interesting:
limit_list: avoid quadratic behavior from still_interesting
"hash-object --literally" introduced in v2.2 was not prepared to
take a really long object type name.
* jc/hash-object:
write_sha1_file(): do not use a separate sha1[] array
t1007: add hash-object --literally tests
hash-object --literally: fix buffer overrun with extra-long object type
git-hash-object.txt: document --literally option
Merge branch 'jk/filter-branch-use-of-sed-on-incomplete-line' into maint
"filter-branch" corrupted commit log message that ends with an
incomplete line on platforms with some "sed" implementations that
munge such a line. Work it around by avoiding to use "sed".
* jk/filter-branch-use-of-sed-on-incomplete-line:
filter-branch: avoid passing commit message through sed
Merge branch 'jk/stash-require-clean-index' into maint
"git stash pop/apply" forgot to make sure that not just the working
tree is clean but also the index is clean. The latter is important
as a stash application can conflict and the index will be used for
conflict resolution.
* jk/stash-require-clean-index:
stash: require a clean index to apply
t3903: avoid applying onto dirty index
t3903: stop hard-coding commit sha1s
Merge branch 'jk/git-no-more-argv0-path-munging' into maint
We have prepended $GIT_EXEC_PATH and the path "git" is installed in
(typically "/usr/bin") to $PATH when invoking subprograms and hooks
for almost eternity, but the original use case the latter tried to
support was semi-bogus (i.e. install git to /opt/foo/git and run it
without having /opt/foo on $PATH), and more importantly it has
become less and less relevant as Git grew more mainstream (i.e. the
users would _want_ to have it on their $PATH). Stop prepending the
path in which "git" is installed to users' $PATH, as that would
interfere the command search order people depend on (e.g. they may
not like versions of programs that are unrelated to Git in /usr/bin
and want to override them by having different ones in /usr/local/bin
and have the latter directory earlier in their $PATH).
* jk/git-no-more-argv0-path-munging:
stop putting argv[0] dirname at front of PATH
Teach the index to optionally remember already seen untracked files
to speed up "git status" in a working tree with tons of cruft.
* nd/untracked-cache: (24 commits)
git-status.txt: advertisement for untracked cache
untracked cache: guard and disable on system changes
mingw32: add uname()
t7063: tests for untracked cache
update-index: test the system before enabling untracked cache
update-index: manually enable or disable untracked cache
status: enable untracked cache
untracked-cache: temporarily disable with $GIT_DISABLE_UNTRACKED_CACHE
untracked cache: mark index dirty if untracked cache is updated
untracked cache: print stats with $GIT_TRACE_UNTRACKED_STATS
untracked cache: avoid racy timestamps
read-cache.c: split racy stat test to a separate function
untracked cache: invalidate at index addition or removal
untracked cache: load from UNTR index extension
untracked cache: save to an index extension
ewah: add convenient wrapper ewah_serialize_strbuf()
untracked cache: don't open non-existent .gitignore
untracked cache: mark what dirs should be recursed/saved
untracked cache: record/validate dir mtime and reuse cached output
untracked cache: make a wrapper around {open,read,close}dir()
...
The code to read pack-bitmap wanted to allocate a few hundred
pointers to a structure, but by mistake allocated and leaked memory
enough to hold that many actual structures. Correct the allocation
size and also have it on stack, as it is small enough.
There was a commented-out (instead of being marked to expect
failure) test that documented a breakage that was fixed since the
test was written; turn it into a proper test.
* sb/t1020-cleanup:
subdirectory tests: code cleanup, uncomment test
The controlling tty-based heuristics to squelch progress output did
not consider that the process may not be talking to a tty at all
(e.g. sending the progress to sideband #2). This is a finishing
touch to a topic that is already in 'master'.
* lm/squelch-bg-progress:
progress: treat "no terminal" as being in the foreground
Filter scripts were run with SIGPIPE disabled on the Git side,
expecting that they may not read what Git feeds them to filter.
We however treated a filter that does not read its input fully
before exiting as an error.
This changes semantics, but arguably in a good way. If a filter
can produce its output without consuming its input using whatever
magic, we now let it do so, instead of diagnosing it as a
programming error.
* jc/ignore-epipe-in-filter:
filter_buffer_or_fd(): ignore EPIPE
copy.c: make copy_fd() report its status silently
There was a dead code that used to handle "git pull --tags" and
show special-cased error message, which was made irrelevant when
the semantics of the option changed back in Git 1.9 days.
* pt/pull-tags-error-diag:
pull: remove --tags error in no merge candidates case
The ref API did not handle cases where 'refs/heads/xyzzy/frotz' is
removed at the same time as 'refs/heads/xyzzy' is added (or vice
versa) very well.
* mh/ref-directory-file:
reflog_expire(): integrate lock_ref_sha1_basic() errors into ours
ref_transaction_commit(): delete extra "the" from error message
ref_transaction_commit(): provide better error messages
rename_ref(): integrate lock_ref_sha1_basic() errors into ours
lock_ref_sha1_basic(): improve diagnostics for ref D/F conflicts
lock_ref_sha1_basic(): report errors via a "struct strbuf *err"
verify_refname_available(): report errors via a "struct strbuf *err"
verify_refname_available(): rename function
refs: check for D/F conflicts among refs created in a transaction
ref_transaction_commit(): use a string_list for detecting duplicates
is_refname_available(): use dirname in first loop
struct nonmatching_ref_data: store a refname instead of a ref_entry
report_refname_conflict(): inline function
entry_matches(): inline function
is_refname_available(): convert local variable "dirname" to strbuf
is_refname_available(): avoid shadowing "dir" variable
is_refname_available(): revamp the comments
t1404: new tests of ref D/F conflicts within transactions
Multi-ref transaction support we merged a few releases ago
unnecessarily kept many file descriptors open, risking to fail with
resource exhaustion. This is for 2.4.x track.
* mh/write-refs-sooner-2.4:
ref_transaction_commit(): fix atomicity and avoid fd exhaustion
ref_transaction_commit(): remove the local flags variable
ref_transaction_commit(): inline call to write_ref_sha1()
rename_ref(): inline calls to write_ref_sha1() from this function
commit_ref_update(): new function, extracted from write_ref_sha1()
write_ref_to_lockfile(): new function, extracted from write_ref_sha1()
t7004: rename ULIMIT test prerequisite to ULIMIT_STACK_SIZE
update-ref: test handling large transactions properly
ref_transaction_commit(): fix atomicity and avoid fd exhaustion
ref_transaction_commit(): remove the local flags variable
ref_transaction_commit(): inline call to write_ref_sha1()
rename_ref(): inline calls to write_ref_sha1() from this function
commit_ref_update(): new function, extracted from write_ref_sha1()
write_ref_to_lockfile(): new function, extracted from write_ref_sha1()
t7004: rename ULIMIT test prerequisite to ULIMIT_STACK_SIZE
update-ref: test handling large transactions properly
The "log --decorate" enhancement in Git 2.4 that shows the commit
at the tip of the current branch e.g. "HEAD -> master", did not
work with --decorate=full.
* mg/log-decorate-HEAD:
log: do not shorten decoration names too early
log: decorate HEAD with branch name under --decorate=full, too
Various documentation mark-up fixes to make the output more
consistent in general and also make AsciiDoctor (an alternative
formatter) happier.
* jk/asciidoc-markup-fix:
doc: convert AsciiDoc {?foo} to ifdef::foo[]
doc: put example URLs and emails inside literal backticks
doc: drop backslash quoting of some curly braces
doc: convert \--option to --option
doc/add: reformat `--edit` option
doc: fix length of underlined section-title
doc: fix hanging "+"-continuation
doc: fix unquoted use of "{type}"
doc: fix misrendering due to `single quote'
Fix remaining instances where "pack-file" is used instead of
"packfile". Some places remain where we still use "pack-file",
This is the case when we explicitly refer to a file with a
".pack" extension as opposed to a data source providing a pack
data stream.
Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
We are explicitly ignoring SIGPIPE, as we fully expect that the
filter program may not read our output fully. Ignore EPIPE that
may come from writing to it as well.
A new test was stolen from Jeff's suggestion.
Helped-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
When copy_fd() function encounters errors, it emits error messages
itself, which makes it impossible for callers to take responsibility
for reporting errors, especially when they want to ignore certain
errors.
Move the error reporting to its callers in preparation.
- copy_file() and copy_file_with_time() by indirection get their
own calls to error().
- hold_lock_file_for_append(), when told to die on error, used to
exit(128) relying on the error message from copy_fd(), but now it
does its own die() instead. Note that the callers that do not
pass LOCK_DIE_ON_ERROR need to be adjusted for this change, but
fortunately there is none ;-)
- filter_buffer_or_fd() has its own error() already, in addition to
the message from copy_fd(), so this will change the output but
arguably in a better way.
The refs API uses ref_lock struct which had its own "int fd", even
though the same file descriptor was in the lock struct it contains.
Clean-up the code to lose this redundant field.
* sb/ref-lock-lose-lock-fd:
refs.c: remove lock_fd from struct ref_lock
Add the "--allow-unknown-type" option to "cat-file" to allow
inspecting loose objects of an experimental or a broken type.
* kn/cat-file-literally:
t1006: add tests for git cat-file --allow-unknown-type
cat-file: teach cat-file a '--allow-unknown-type' option
cat-file: make the options mutually exclusive
sha1_file: support reading from a loose object of unknown type
A heuristic to help the "git <cmd> <revs> <pathspec>" command line
convention to catch mistyped paths is to make sure all the non-rev
parameters in the later part of the command line are names of the
files in the working tree, but that means "git grep $str -- \*.c"
must always be disambiguated with "--", because nobody sane will
create a file whose name literally is asterisk-dot-see. Loosen the
heuristic to declare that with a wildcard string the user likely
meant to give us a pathspec.
* nd/dwim-wildcards-as-pathspecs:
pathspec: avoid the need of "--" when wildcard is used
"git merge FETCH_HEAD" learned that the previous "git fetch" could
be to create an Octopus merge, i.e. recording multiple branches
that are not marked as "not-for-merge"; this allows us to lose an
old style invocation "git merge <msg> HEAD $commits..." in the
implementation of "git pull" script; the old style syntax can now
be deprecated.
* jc/merge:
merge: deprecate 'git merge <message> HEAD <commit>' syntax
merge: handle FETCH_HEAD internally
merge: decide if we auto-generate the message early in collect_parents()
merge: make collect_parents() auto-generate the merge message
merge: extract prepare_merge_message() logic out
merge: narrow scope of merge_names
merge: split reduce_parents() out of collect_parents()
merge: clarify collect_parents() logic
merge: small leakfix and code simplification
merge: do not check argc to determine number of remote heads
merge: clarify "pulling into void" special case
t5520: test pulling an octopus into an unborn branch
t5520: style fixes
merge: simplify code flow
merge: test the top-level merge driver
The connection initiation code for "ssh" transport tried to absorb
differences between the stock "ssh" and Putty-supplied "plink" and
its derivatives, but the logic to tell that we are using "plink"
variants were too loose and falsely triggered when "plink" appeared
anywhere in the path (e.g. "/home/me/bin/uplink/ssh").
* bc/connect-plink:
connect: improve check for plink to reduce false positives
t5601: fix quotation error leading to skipped tests
connect: simplify SSH connection code path
"git stash pop/apply" forgot to make sure that not just the working
tree is clean but also the index is clean. The latter is important
as a stash application can conflict and the index will be used for
conflict resolution.
* jk/stash-require-clean-index:
stash: require a clean index to apply
t3903: avoid applying onto dirty index
t3903: stop hard-coding commit sha1s
We have prepended $GIT_EXEC_PATH and the path "git" is installed in
(typically "/usr/bin") to $PATH when invoking subprograms and hooks
for almost eternity, but the original use case the latter tried to
support was semi-bogus (i.e. install git to /opt/foo/git and run it
without having /opt/foo on $PATH), and more importantly it has
become less and less relevant as Git grew more mainstream (i.e. the
users would _want_ to have it on their $PATH). Stop prepending the
path in which "git" is installed to users' $PATH, as that would
interfere the command search order people depend on (e.g. they may
not like versions of programs that are unrelated to Git in /usr/bin
and want to override them by having different ones in /usr/local/bin
and have the latter directory earlier in their $PATH).
* jk/git-no-more-argv0-path-munging:
stop putting argv[0] dirname at front of PATH
core.excludesfile (defaulting to $XDG_HOME/git/ignore) is supposed
to be overridden by repository-specific .git/info/exclude file, but
the order was swapped from the beginning. This belatedly fixes it.
* jc/gitignore-precedence:
ignore: info/exclude should trump core.excludesfile
After "git add -N", the path appeared in output of "git diff HEAD"
and "git diff --cached HEAD", leading "git status" to classify it
as "Changes to be committed". Such a path, however, is not yet to
be scheduled to be committed. "git diff" showed the change to the
path as modification, not as a "new file", in the header of its
output.
Treat such paths as "yet to be added to the index but Git already
know about them"; "git diff HEAD" and "git diff --cached HEAD"
should not talk about them, and "git diff" should show them as new
files yet to be added to the index.
* nd/diff-i-t-a:
diff-lib.c: adjust position of i-t-a entries in diff
progress: treat "no terminal" as being in the foreground
progress: treat "no terminal" as being in the foreground
Commit 85cb890 (progress: no progress in background,
2015-04-13) avoids sending progress from background
processes by checking that the process group id of the
current process is the same as that of the controlling
terminal.
If we don't have a terminal, however, this check never
succeeds, and we print no progress at all (until the final
"done" message). This can be seen when cloning a large
repository; instead of getting progress updates for
"counting objects", it will appear to hang then print the
final count.
We can fix this by treating an error return from tcgetpgrp()
as a signal to show the progress.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
pack-bitmaps: plug memory leak, fix allocation size for recent_bitmaps
Use an automatic variable for recent_bitmaps, an array of pointers.
This way we don't allocate too much and don't have to free the memory
at the end. The old code over-allocated because it reserved enough
memory to store all of the structs it is only pointing to and never
freed it. 160 64-bit pointers take up 1280 bytes, which is not too
much to be placed on the stack.
MAX_XOR_OFFSET is turned into a preprocessor constant to make it
constant enough for use in an non-variable array declaration.
Noticed-by: Stefan Beller <stefanbeller@gmail.com> Suggested-by: Jeff King <peff@peff.net> Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
clone: call transport_set_verbosity before anything else on the newly created transport
Commit 2879bc3 made the progress and verbosity options sent to remote helper
earlier than they previously were. But nothing else after that would send
updates if the value is changed later on with transport_set_verbosity.
While for fetch and push, transport_set_verbosity is the first thing that
is done after creating the transport, it was not the case for clone. So
commit 2879bc3 broke changing progress and verbosity for clone, for urls
requiring a remote helper only (so, not git:// urls, for instance).
Moving transport_set_verbosity to just after the transport is created
works around the issue.
Signed-off-by: Mike Hommey <mh@glandium.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Back when these tests were written, we wanted to make sure that Git
notices it is in a bare repository and "git show -s HEAD" would
refrain from complaining that HEAD might mean a file it sees in its
current working directory (because it does not). But the version of
Git back then didn't behave well, without (doubly) being told that
it is inside a bare repository by exporting "GIT_DIR=.". The form
of the test we originally wanted to have was left commented out as
a reminder.
Nowadays the test as originally intended works, so add it to the
test suite. We'll keep the old test that explicitly sets GIT_DIR=.
to make sure that use case will not regress.
Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since b814da8 (pull: add pull.ff configuration, 2014-01-15) git-pull
supported setting --(no-)ff via the pull.ff configuration value.
However, as it only matches the string values of "true" and "false", it
does not support other boolean aliases such as "on", "off", "1", "0".
This is inconsistent with the merge.ff setting, which supports these
aliases.
Fix this by using the bool_or_string_config function to retrieve the
value of pull.ff.
Signed-off-by: Paul Tan <pyokagan@gmail.com> Reviewed-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since b814da8 (pull: add pull.ff configuration, 2014-01-15), running
git-pull with the configuration pull.ff=false or pull.ff=only is
equivalent to passing --no-ff and --ff-only to git-merge. However, if
pull.ff=true, no switch is passed to git-merge. This leads to the
confusing behavior where pull.ff=false or pull.ff=only is able to
override merge.ff, while pull.ff=true is unable to.
Fix this by adding the --ff switch if pull.ff=true, and add a test to
catch future regressions.
Furthermore, clarify in the documentation that pull.ff overrides
merge.ff.
Signed-off-by: Paul Tan <pyokagan@gmail.com> Reviewed-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since efb779f (merge, pull: add '--(no-)log' command line option,
2008-04-06) git-pull supported the (--no-)log switch and would pass it
to git-merge.
96e9420 (merge: Make '--log' an integer option for number of shortlog
entries, 2010-09-08) implemented support for the --log=<n> switch, which
would explicitly set the number of shortlog entries. However, git-pull
does not recognize this option, and will instead pass it to git-fetch,
leading to "unknown option" errors.
Fix this by matching --log=* in addition to --log and --no-log.
Implement a test for this use case.
Signed-off-by: Paul Tan <pyokagan@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
lock_packed_refs(): allow retries when acquiring the packed-refs lock
Currently, there is only one attempt to acquire any lockfile, and if
the lock is held by another process, the locking attempt fails
immediately.
This is not such a limitation for loose reference files. First, they
don't take long to rewrite. Second, most reference updates have a
known "old" value, so if another process is updating a reference at
the same moment that we are trying to lock it, then probably the
expected "old" value will not longer be valid, and the update will
fail anyway.
But these arguments do not hold for packed-refs:
* The packed-refs file can be large and take significant time to
rewrite.
* Many references are stored in a single packed-refs file, so it could
be that the other process was changing a different reference than
the one that we are interested in.
Therefore, it is much more likely for there to be spurious lock
conflicts in connection to the packed-refs file, resulting in
unnecessary command failures.
So, if the first attempt to lock the packed-refs file fails, continue
retrying for a configurable length of time before giving up. The
default timeout is 1 second.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
lockfile: allow file locking to be retried with a timeout
Currently, there is only one attempt to lock a file. If it fails, the
whole operation fails.
But it might sometimes be advantageous to try acquiring a file lock a
few times before giving up. So add a new function,
hold_lock_file_for_update_timeout(), that allows a timeout to be
specified. Make hold_lock_file_for_update() a thin wrapper around the
new function.
If timeout_ms is positive, then retry for at least that many
milliseconds to acquire the lock. On each failed attempt, use select()
to wait for a backoff time that increases quadratically (capped at 1
second) and has a random component to prevent two processes from
getting synchronized. If timeout_ms is negative, retry indefinitely.
In a moment we will switch to using the new function when locking
packed-refs.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The problem is that setup_rerere() will not actually take
the lock if the rerere system is disabled. We should notice
this and return early. We can return with a success code
here, because we know there is nothing to forget.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
pull: remove --tags error in no merge candidates case
Since 441ed41 ("git pull --tags": error out with a better message.,
2007-12-28), git pull --tags would print a different error message if
git-fetch did not return any merge candidates:
It doesn't make sense to pull all tags; you probably meant:
git fetch --tags
This is because at that time, git-fetch --tags would override any
configured refspecs, and thus there would be no merge candidates. The
error message was thus introduced to prevent confusion.
However, since c5a84e9 (fetch --tags: fetch tags *in addition to*
other stuff, 2013-10-30), git fetch --tags would fetch tags in addition
to any configured refspecs. Hence, if any no merge candidates situation
occurs, it is not because --tags was set. As such, this special error
message is now irrelevant.
To prevent confusion, remove this error message.
Signed-off-by: Paul Tan <pyokagan@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The former seems to just be syntactic sugar for the latter.
And as it's sugar that AsciiDoctor doesn't understand, it
would be nice to avoid it. Since there are only two spots,
and the resulting source is not significantly harder to
read, it's worth doing.
Note that this does slightly affect the generated HTML (it
has an extra newline), but the rendered result for both HTML
and docbook should be the same (since the newline is not
syntactically significant there).
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach the codepaths that read .gitignore and .gitattributes files
that these files encoded in UTF-8 may have UTF-8 BOM marker at the
beginning; this makes it in line with what we do for configuration
files already.
* cn/bom-in-gitignore:
attr: skip UTF8 BOM at the beginning of the input file
config: use utf8_bom[] from utf.[ch] in git_parse_source()
utf8-bom: introduce skip_utf8_bom() helper
add_excludes_from_file: clarify the bom skipping logic
dir: allow a BOM at the beginning of exclude files
Access to objects in repositories that borrow from another one on a
slow NFS server unnecessarily got more expensive due to recent code
becoming more cautious in a naive way not to lose objects to pruning.
* jk/prune-mtime:
sha1_file: only freshen packs once per run
sha1_file: freshen pack objects before loose
reachable: only mark local objects as recent
Merge branch 'jk/init-core-worktree-at-root' into maint
We avoid setting core.worktree when the repository location is the
".git" directory directly at the top level of the working tree, but
the code misdetected the case in which the working tree is at the
root level of the filesystem (which arguably is a silly thing to
do, but still valid).
* jk/init-core-worktree-at-root:
init: don't set core.worktree when initializing /.git
The DECORATE_SHORT_REFS option given to load_ref_decorations()
affects the way a copy of the refname is stored for each decorated
commit, and this forces later steps like current_pointed_by_HEAD()
to adjust their behaviour based on this initial settings.
Instead, we can always store the full refname and then shorten them
when producing the output.
log: decorate HEAD with branch name under --decorate=full, too
The previous step to teach "log --decorate" to show "HEAD -> master"
instead of "HEAD, master" when showing the commit at the tip of the
'master' branch, when the 'master' branch is checked out, did not
work for "log --decorate=full".
The commands in the "log" family prepare commit decorations for all
refs upfront, and the actual string used in a decoration depends on
how load_ref_decorations() is called very early in the process. By
default, "git log --decorate" stores names with common prefixes such
as "refs/heads" stripped; "git log --decorate=full" stores the full
refnames.
When the current_pointed_by_HEAD() function has to decide if "HEAD"
points at the branch a decoration describes, however, what was
passed to load_ref_decorations() to decide to strip (or keep) such a
common prefix is long lost. This makes it impossible to reliably
tell if a decoration that stores "refs/heads/master", for example,
is the 'master' branch (under "--decorate" with prefix omitted) or
'refs/heads/master' branch (under "--decorate=full").
Keep what was passed to load_ref_decorations() in a global next to
the global variable name_decoration, and use that to decide how to
match what was read from "HEAD" and what is in a decoration.
Text like "{foo}" triggers an AsciiDoc attribute; we have to
write "\{foo}" to suppress this. But when the "foo" is not a
syntactically valid attribute, we can skip the quoting. This
makes the source nicer to read, and looks better under
Asciidoctor. With AsciiDoc itself, this patch produces no
changes.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Older versions of AsciiDoc would convert the "--" in
"--option" into an emdash. According to 565e135
(Documentation: quote double-dash for AsciiDoc, 2011-06-29),
this is fixed in AsciiDoc 8.3.0. According to bf17126, we
don't support anything older than 8.4.1 anyway, so we no
longer need to worry about quoting.
Even though this does not change the output at all, there
are a few good reasons to drop the quoting:
1. It makes the source prettier to read.
2. We don't quote consistently, which may be confusing when
reading the source.
3. Asciidoctor does not like the quoting, and renders a
literal backslash.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
but AsciiDoctor is more strict. Let's match the underline to
the title (which also makes the source prettier to read).
The output from AsciiDoc is the same either way.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
In list content that wants to continue to a second
paragraph, the "+" continuation and subsequent paragraph
need to be left-aligned. Otherwise AsciiDoc seems to insert
only a linebreak.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Curly braces open an "attribute" in AsciiDoc; if there's no
such attribute, strange things may happen. In this case, the
unquoted "{type}" causes AsciiDoc to omit an entire line of
text from the output. We can fix it by putting the whole
phrase inside literal backticks (which also lets us get rid
of ugly backslash escaping).
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
AsciiDoc misparses some text that contains a `literal`
word followed by a fancy `single quote' word, and treats
everything from the start of the literal to the end of the
quote as a single-quoted phrase.
We can work around this by switching the latter to be a
literal, as well. In the first case, this is perhaps what
was intended anyway, as it makes us consistent with the the
earlier literals in the same paragraph. In the second, the
output is arguably better, as we will format our commit
references as <code> blocks.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge branch 'mh/write-refs-sooner-2.3' into mh/write-refs-sooner-2.4
* mh/write-refs-sooner-2.3:
ref_transaction_commit(): fix atomicity and avoid fd exhaustion
ref_transaction_commit(): remove the local flags variable
ref_transaction_commit(): inline call to write_ref_sha1()
rename_ref(): inline calls to write_ref_sha1() from this function
commit_ref_update(): new function, extracted from write_ref_sha1()
write_ref_to_lockfile(): new function, extracted from write_ref_sha1()
t7004: rename ULIMIT test prerequisite to ULIMIT_STACK_SIZE
update-ref: test handling large transactions properly
ref_transaction_commit(): fix atomicity and avoid fd exhaustion
The old code was roughly
for update in updates:
acquire locks and check old_sha
for update in updates:
if changing value:
write_ref_to_lockfile()
commit_ref_update()
for update in updates:
if deleting value:
unlink()
rewrite packed-refs file
for update in updates:
if reference still locked:
unlock_ref()
This has two problems.
Non-atomic updates
==================
The atomicity of the reference transaction depends on all pre-checks
being done in the first loop, before any changes have started being
committed in the second loop. The problem is that
write_ref_to_lockfile() (previously part of write_ref_sha1()), which
is called from the second loop, contains two more checks:
* It verifies that new_sha1 is a valid object
* If the reference being updated is a branch, it verifies that
new_sha1 points at a commit object (as opposed to a tag, tree, or
blob).
If either of these checks fails, the "transaction" is aborted during
the second loop. But this might happen after some reference updates
have already been permanently committed. In other words, the
all-or-nothing promise of "git update-ref --stdin" could be violated.
So these checks have to be moved to the first loop.
The old code locked all of the references in the first loop, leaving
all of the lockfiles open until later loops. Since we might be
updating a lot of references, this could result in file descriptor
exhaustion.
The solution
============
After this patch, the code looks like
for update in updates:
acquire locks and check old_sha
if changing value:
write_ref_to_lockfile()
else:
close_ref()
for update in updates:
if changing value:
commit_ref_update()
for update in updates:
if deleting value:
unlink()
rewrite packed-refs file
for update in updates:
if reference still locked:
unlock_ref()
This fixes both problems:
1. The pre-checks in write_ref_to_lockfile() are now done in the first
loop, before any changes have been committed. If any of the checks
fails, the whole transaction can now be rolled back correctly.
2. All lockfiles are closed in the first loop immediately after they
are created (either by write_ref_to_lockfile() or by close_ref()).
This means that there is never more than one open lockfile at a
time, preventing file descriptor exhaustion.
To simplify the bookkeeping across loops, add a new REF_NEEDS_COMMIT
bit to update->flags, which keeps track of whether the corresponding
lockfile needs to be committed, as opposed to just unlocked. (Since
"struct ref_update" is internal to the refs module, this change is not
visible to external callers.)
This change fixes two tests in t1400.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>