attr.c: update a stale comment on "struct match_attr"
When 82dce998 (attr: more matching optimizations from .gitignore,
2012-10-15) changed a pointer to a string "*pattern" into an
embedded "struct pattern" in struct match_attr, it forgot to update
the comment that describes the structure.
Signed-off-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The URL matching function computes for two URLs whether they match not.
The match is performed by splitting up the URL into different parts and
then doing an exact comparison with the to-be-matched URL.
The main user of `urlmatch` is the configuration subsystem. It allows to
set certain configurations based on the URL which is being connected to
via keys like `http.<url>.*`. A common use case for this is to set
proxies for only some remotes which match the given URL. Unfortunately,
having exact matches for all parts of the URL can become quite tedious
in some setups. Imagine for example a corporate network where there are
dozens or even hundreds of subdomains, which would have to be configured
individually.
Allow users to write an asterisk '*' in place of any 'host' or
'subdomain' label as part of the host name. For example,
"http.https://*.example.com.proxy" sets "http.proxy" for all direct
subdomains of "https://example.com", e.g. "https://foo.example.com", but
not "https://foo.bar.example.com".
Signed-off-by: Patrick Steinhardt <patrick.steinhardt@elego.de> Helped-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
In order to be able to rank positive matches by `urlmatch`, we inspect
the path length and user part to decide whether a match is better than
another match. As all other parts are matched exactly between both URLs,
this is the correct thing to do right now.
In the future, though, we want to introduce wild cards for the domain
part. When doing this, it does not make sense anymore to only compare
the path lengths. Instead, we also want to compare the domain lengths to
determine which of both URLs matches the host part more closely.
Signed-off-by: Patrick Steinhardt <patrick.steinhardt@elego.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
connect: Add the envvar GIT_SSH_VARIANT and ssh.variant config
This environment variable and configuration value allow to
override the autodetection of plink/tortoiseplink in case that
Git gets it wrong.
[jes: wrapped overly-long lines, factored out and changed
get_ssh_variant() to handle_ssh_variant() to accomodate the
change from the putty/tortoiseplink variables to
port_option/needs_batch, adjusted the documentation, free()d
value obtained from the config.]
Signed-off-by: Segev Finer <segev208@gmail.com> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Prior to c2f41bf52 (color.c: fix color_parse_mem() with
value_len == 0, 2017-01-19), the empty string was
interpreted as a color "reset". This was an accidental
outcome, and that commit turned it into an error.
However, scripts may pass the empty string as a default
value to "git config --get-color" to disable color when the
value is not defined. The git-add--interactive script does
this. As a result, the script is unusable since c2f41bf52
unless you have color.diff.plain defined (if it is defined,
then we don't parse the empty default at all).
Our test scripts didn't notice the recent breakage because
they run without a terminal, and thus without color. They
never hit this code path at all. And nobody noticed the
original buggy "reset" behavior, because it was effectively
a noop.
Let's fix the code to have an empty color name produce an
empty sequence of color codes. The tests need a few fixups:
- we'll add a new test in t4026 to cover this case. But
note that we need to tweak the color() helper. While
we're there, let's factor out the literal ANSI ESC
character. Otherwise it makes the diff quite hard to
read.
- we'll add a basic sanity-check in t4026 that "git add
-p" works at all when color is enabled. That would have
caught this bug, as well as any others that are specific
to the color code paths.
- 73c727d69 (log --graph: customize the graph lines with
config log.graphColors, 2017-01-19) added a test to
t4202 that checks some "invalid" graph color config.
Since ",, blue" before yielded only "blue" as valid, and
now yields "empty, empty, blue", we don't match the
expected output.
One way to fix this would be to change the expectation
to the empty color strings. But that makes the test much
less interesting, since we show only two graph lines,
both of which would be colorless.
Since the empty-string case is now covered by t4026,
let's remove them entirely here. They're just in the way
of the primary thing the test is supposed to be
checking.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge branch 'jk/archive-zip-userdiff-config' into maint
"git archive" did not read the standard configuration files, and
failed to notice a file that is marked as binary via the userdiff
driver configuration.
Merge branch 'dt/disable-bitmap-in-auto-gc' into maint
It is natural that "git gc --auto" may not attempt to pack
everything into a single pack, and there is no point in warning
when the user has configured the system to use the pack bitmap,
leading to disabling further "gc".
* dt/disable-bitmap-in-auto-gc:
repack: die on incremental + write-bitmap-index
auto gc: don't write bitmaps for incremental repacks
Leakage of lockfiles in the config subsystem has been fixed.
* nd/config-misc-fixes:
config.c: handle lock file in error case in git_config_rename_...
config.c: rename label unlock_and_out
config.c: handle error case for fstat() calls
Compression setting for producing packfiles were spread across
three codepaths, one of which did not honor any configuration.
Unify these so that all of them honor core.compression and
pack.compression variables the same way.
Merge branch 'jk/make-tags-find-sources-tweak' into maint
Update the procedure to generate "tags" for developer support.
* jk/make-tags-find-sources-tweak:
Makefile: exclude contrib from FIND_SOURCE_FILES
Makefile: match shell scripts in FIND_SOURCE_FILES
Makefile: exclude test cruft from FIND_SOURCE_FILES
Makefile: reformat FIND_SOURCE_FILES
Some platforms no longer understand "latin-1" that is still seen in
the wild in e-mail headers; replace them with "iso-8859-1" that is
more widely known when conversion fails from/to it.
* jc/latin-1:
utf8: accept "latin-1" as ISO-8859-1
utf8: refactor code to decide fallback encoding
"git fsck --connectivity-check" was not working at all.
* jk/fsck-connectivity-check-fix:
fsck: lazily load types under --connectivity-only
fsck: move typename() printing to its own function
t1450: use "mv -f" within loose object directory
fsck: check HAS_OBJ more consistently
fsck: do not fallback "git fsck <bogus>" to "git fsck"
fsck: tighten error-checks of "git fsck <head>"
fsck: prepare dummy objects for --connectivity-check
fsck: report trees as dangling
t1450: clean up sub-objects in duplicate-entry test
* js/difftool-builtin:
difftool: hack around -Wzero-length-format warning
difftool: retire the scripted version
difftool: implement the functionality in the builtin
difftool: add a skeleton for the upcoming builtin
A few codepaths had to rely on a global variable when sorting
elements of an array because sort(3) API does not allow extra data
to be passed to the comparison function. Use qsort_s() when
natively available, and a fallback implementation of it when not,
to eliminate the need, which is a prerequisite for making the
codepath reentrant.
* rs/qsort-s:
ref-filter: use QSORT_S in ref_array_sort()
string-list: use QSORT_S in string_list_sort()
perf: add basic sort performance test
add QSORT_S
compat: add qsort_s()
"git show-ref HEAD" used with "--verify" because the user is not
interested in seeing refs/remotes/origin/HEAD, and used with
"--head" because the user does not want HEAD to be filtered out,
i.e. "git show-ref --head --verify HEAD", did not work as expected.
* vp/show-ref-verify-head:
show-ref: remove a stale comment
show-ref: remove dead `if (verify)' check
show-ref: detect dangling refs under --verify as well
show-ref: move --quiet handling into show_one()
show-ref: allow -d to work with --verify
show-ref: accept HEAD with --verify
With anticipatory tweaking for remotes defined in ~/.gitconfig
(e.g. "remote.origin.prune" set to true, even though there may or
may not actually be "origin" remote defined in a particular Git
repository), "git remote rename" and other commands misinterpreted
and behaved as if such a non-existing remote actually existed.
* js/remote-rename-with-half-configured-remote:
remote rename: more carefully determine whether a remote is configured
remote rename: demonstrate a bogus "remote exists" bug
The sequencer machinery has been further enhanced so that a later
set of patches can start using it to reimplement "rebase -i".
* js/sequencer-i-countdown-3: (38 commits)
sequencer (rebase -i): write out the final message
sequencer (rebase -i): write the progress into files
sequencer (rebase -i): show the progress
sequencer (rebase -i): suggest --edit-todo upon unknown command
sequencer (rebase -i): show only failed cherry-picks' output
sequencer (rebase -i): show only failed `git commit`'s output
sequencer: use run_command() directly
sequencer: update reading author-script
sequencer (rebase -i): differentiate between comments and 'noop'
sequencer (rebase -i): implement the 'drop' command
sequencer (rebase -i): allow rescheduling commands
sequencer (rebase -i): respect strategy/strategy_opts settings
sequencer (rebase -i): respect the rebase.autostash setting
sequencer (rebase -i): run the post-rewrite hook, if needed
sequencer (rebase -i): record interrupted commits in rewritten, too
sequencer (rebase -i): copy commit notes at end
sequencer (rebase -i): set the reflog message consistently
sequencer (rebase -i): refactor setting the reflog message
sequencer (rebase -i): allow fast-forwarding for edit/reword
sequencer (rebase -i): implement the 'reword' command
...
"git submodule push" learned "--recurse-submodules=only option to
push submodules out without pushing the top-level superproject.
* bw/push-submodule-only:
push: add option to push only submodules
submodules: add RECURSE_SUBMODULES_ONLY value
transport: reformat flag #defines to be more readable
An error message with an ASCII control character like '\r' in it
can alter the message to hide its early part, which is problematic
when a remote side gives such an error message that the local side
will relay with a "remote: " prefix.
Implement the '--format' option provided by 'ref-filter'. This lets the
user list branches as per desired format similar to the implementation
in 'git for-each-ref'.
Add tests and documentation for the same.
Mentored-by: Christian Couder <christian.couder@gmail.com> Mentored-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr> Signed-off-by: Karthik Nayak <karthik.188@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Port branch.c to use ref-filter APIs for printing. This clears out
most of the code used in branch.c for printing and replaces them with
calls made to the ref-filter library.
Introduce build_format() which gets the format required for printing
of refs. Make amendments to print_ref_list() to reflect these changes.
The strings included in build_format() may not be safely quoted for
inclusion (i.e. it might contain '%' which needs to be escaped with an
additional '%'). Introduce quote_literal_for_format() as a helper
function which takes a string and returns a version of the string that
is safely quoted to be used in the for-each-ref format which is built
in build_format().
Change calc_maxwidth() to also account for the length of HEAD ref, by
calling ref-filter:get_head_discription().
Also change the test in t6040 to reflect the changes.
Before this patch, all cross-prefix symrefs weren't shortened. Since
we're using ref-filter APIs, we shorten all symrefs by default. We also
allow the user to change the format if needed with the introduction of
the '--format' option in the next patch.
Mentored-by: Christian Couder <christian.couder@gmail.com> Mentored-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr> Helped-by: Junio C Hamano <gitster@pobox.com> Helped-by: Jeff King <peff@peff.net> Helped-by: Ramsay Jones <ramsay@ramsayjones.plus.com> Signed-off-by: Karthik Nayak <karthik.188@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Call ref-filter's setup_ref_filter_porcelain_msg() to enable
translated messages for the %(upstream:tack) atom. Although branch.c
doesn't currently use ref-filter's printing API's, this will ensure
that when it does in the future patches, we do not need to worry about
translation.
Written-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr> Mentored-by: Christian Couder <christian.couder@gmail.com> Mentored-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr> Signed-off-by: Karthik Nayak <karthik.188@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
ref-filter: allow porcelain to translate messages in the output
Introduce setup_ref_filter_porcelain_msg() so that the messages used in
the atom %(upstream:track) can be translated if needed. By default, keep
the messages untranslated, which is the right behavior for plumbing
commands. This is needed as we port branch.c to use ref-filter's
printing API's.
Written-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr> Mentored-by: Christian Couder <christian.couder@gmail.com> Mentored-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr> Signed-off-by: Karthik Nayak <karthik.188@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
ref-filter: add an 'rstrip=<N>' option to atoms which deal with refnames
Complimenting the existing 'lstrip=<N>' option, add an 'rstrip=<N>'
option which strips `<N>` slash-separated path components from the end
of the refname (e.g., `%(refname:rstrip=2)` turns `refs/tags/foo` into
`refs`).
Signed-off-by: Karthik Nayak <Karthik.188@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
ref-filter: modify the 'lstrip=<N>' option to work with negative '<N>'
Currently the 'lstrip=<N>' option only takes a positive value '<N>'
and strips '<N>' slash-separated path components from the left. Modify
the 'lstrip' option to also take a negative number '<N>' which would
strip from the left as necessary and _leave_ behind only 'N'
slash-separated path components from the right-most end.
For e.g. %(refname:lstrip=-1) would make 'foo/goo/abc' into 'abc'.
Add documentation and tests for the same.
Signed-off-by: Karthik Nayak <Karthik.188@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Documentation: implement linkgit macro for Asciidoctor
AsciiDoc uses a configuration file to implement macros like linkgit,
while Asciidoctor uses Ruby extensions. Implement a Ruby extension that
implements the linkgit macro for Asciidoctor in the same way that
asciidoc.conf does for AsciiDoc. Adjust the Makefile to use it by
default.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
builtin/commit.c: switch to strbuf, instead of snprintf()
Switch to dynamic allocation with strbuf, so we can avoid dealing
with magic numbers in the code and reduce the cognitive burden from
the programmers. The original code is correct, but programmers no
longer have to count bytes needed for static allocation to know that.
As a side effect of this change, we also reduce the snprintf()
calls, that may silently truncate results if the programmer is not
careful.
Helped-by: René Scharfe <l.s.r@web.de> Helped-by: Junio C Hamano <gitster@pobox.com> Helped-by: Jeff King <peff@peff.net> Signed-off-by: Elia Pinto <gitter.spiros@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
urlmatch: split host and port fields in `struct url_info`
The `url_info` structure contains information about a normalized URL
with the URL's components being represented by different fields. The
host and port part though are to be accessed by the same `host` field,
so that getting the host and/or port separately becomes more involved
than really necessary.
To make the port more readily accessible, split up the host and port
fields. Namely, the `host_len` will not include the port length anymore
and a new `port_off` field has been added which includes the offset to
the port, if available.
The only user of these fields is `url_normalize_1`. This change makes it
easier later on to treat host and port differently when introducing
globs for domains.
Signed-off-by: Patrick Steinhardt <patrick.steinhardt@elego.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `url_normalize` function is used to validate and normalize URLs. As
such, it does not allow for some special characters to be part of the
URLs that are to be normalized. As we want to allow using globs in some
configuration keys making use of URLs, namely `http.<url>.<key>`, but
still normalize them, we need to somehow enable some additional allowed
characters.
To do this without having to change all callers of `url_normalize`,
where most do not actually want globbing at all, we split off another
function `url_normalize_1`. This function accepts an additional
parameter `allow_globs`, which is subsequently called by `url_normalize`
with `allow_globs=0`.
As of now, this function is not used with globbing enabled. A caller
will be added in the following commit.
Signed-off-by: Patrick Steinhardt <patrick.steinhardt@elego.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The default behavior of update-ref to create reflogs differs in
repositories with worktree and bare ones. The existing tests cover only
the behavior of repositories with worktree.
This commit adds tests that assert the correct behavior in bare
repositories for update-ref. Two cases are covered:
- If core.logAllRefUpdates is not set, no reflogs should be created
- If core.logAllRefUpdates is true, reflogs should be created
Signed-off-by: Cornelius Weig <cornelius.weig@tngtech.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
When core.logallrefupdates is true, we only create a new reflog for refs
that are under certain well-known hierarchies. The reason is that we
know that some hierarchies (like refs/tags) are not meant to change, and
that unknown hierarchies might not want reflogs at all (e.g., a
hypothetical refs/foo might be meant to change often and drop old
history immediately).
However, sometimes it is useful to override this decision and simply log
for all refs, because the safety and audit trail is more important than
the performance implications of keeping the log around.
This patch introduces a new "always" mode for the core.logallrefupdates
option which will log updates to everything under refs/, regardless
where in the hierarchy it is (we still will not log things like
ORIG_HEAD and FETCH_HEAD, which are known to be transient).
Based-on-patch-by: Jeff King <peff@peff.net> Signed-off-by: Cornelius Weig <cornelius.weig@tngtech.com> Reviewed-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Exchange the values of graph->columns and graph->new_columns using the
macro SWAP instead of hand-rolled code. The result is shorter and
easier to read.
This transformation was not done by the semantic patch swap.cocci
because there's an unrelated statement between the second and the last
step of the exchange, so it didn't match the expected pattern.
Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the macro SWAP to exchange the value of pairs of variables instead
of swapping them manually with the help of a temporary variable. The
resulting code is shorter and easier to read.
The two cases were not transformed by the semantic patch swap.cocci
because it's extra careful and handles only cases where the types of all
variables are the same -- and here we swap two ints and use an unsigned
temporary variable for that. Nevertheless the conversion is safe, as
the value range is preserved with and without the patch.
Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apply the semantic patch swap.cocci to convert hand-rolled swaps to use
the macro SWAP. The resulting code is shorter and easier to read, the
object code is effectively unchanged.
The patch for object.c had to be hand-edited in order to preserve the
comment before the change; Coccinelle tried to eat it for some reason.
Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a macro for exchanging the values of variables. It allows users
to avoid repetition and takes care of the temporary variable for them.
It also makes sure that the storage sizes of its two parameters are the
same. Its memcpy(1) calls are optimized away by current compilers.
Also add a conservative semantic patch for transforming only swaps of
variables of the same type.
Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
merge-recursive: make "CONFLICT (rename/delete)" message show both paths
The current message printed by "git merge-recursive" for a rename/delete
conflict is like this:
CONFLICT (rename/delete): new-path deleted in HEAD and renamed in
other-branch. Version other-branch of new-path left in tree.
To be more helpful, the message should show both paths of the rename and
state that the deletion occurred at the old path, not the new path. So
change the message to the following format:
CONFLICT (rename/delete): old-path deleted in HEAD and renamed to
new-path in other-branch. Version other-branch of new-path left in tree.
Since this doubles the number of cases in handle_change_delete (modify vs.
rename), refactor the code to halve the number of cases again by merging the
cases where o->branch1 has the change and o->branch2 has the delete with the
cases that are the other way around.
Also add a simple test of the new conflict message.
Signed-off-by: Matt McCutchen <matt@mattmccutchen.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t0001: don't let a default ACL interfere with the umask test
The "init creates a new deep directory (umask vs. shared)" test expects
the permissions of newly created files to be based on the umask, which
fails if a default ACL is inherited from the working tree for git. So
attempt to remove a default ACL if there is one. Same idea as 8ed0a740dd42bd0724aebed6e3b07c4ea2a2d5e8. (I guess I'm the only one who
ever runs the test suite with a default ACL set.)
Signed-off-by: Matt McCutchen <matt@mattmccutchen.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
When running git-p4 on Windows, with multiple git-p4.mapUser entries in
git config - no user mappings are applied to the generated repository.
Reproduction Steps:
1. Add multiple git-p4.mapUser entries to git config on a Windows
machine
2. Attempt to clone a p4 repository
None of the user mappings will be applied.
This issue is actually caused by gitConfigList, using split(os.linesep)
to convert the output of git config --get-all into a list. On Windows,
os.linesep is equal to '\r\n' - however git.exe returns configuration
with a line seperator of '\n'.
This leads to the list returned by gitConfigList containing only one
element - which contains the full output of git config --get-all in
string form, which causes problems for the code introduced to
getUserMapFromPerforceServer in 10d08a149d ("git-p4: map a P4 user to
Git author name and email address", 2016-03-01)
This issue should be caught by the test introduced in 10d08a1, however
would require running on Windows to reproduce.
Using splitlines solves this issue, by splitting config on all
typical delimiters ('\n', '\r\n' etc.)
Signed-off-by: George Vanburgh <gvanburgh@bloomberg.net> Reviewed-by: Luke Diamand <luke@diamand.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
On Windows, executables need to have the file extension `.exe`, or they
are not executables. Hence, to support scripts, Git for Windows also
looks for a she-bang line by opening the file in question, and executing
it via the specified script interpreter.
To figure out whether files in the `PATH` are executable, `git help` has
code that imitates this behavior. With one exception: it *always* opens
the files and looks for a she-bang line *or* an `MZ` tell-tale
(nevermind that files with the magic `MZ` but without file extension
`.exe` would still not be executable).
Opening this many files leads to performance problems that are even more
serious when a virus scanner is running. Therefore, let's change the
code to look for the file extension `.exe` early, and avoid opening the
file altogether if we already know that it is executable.
See the following measurements (in seconds) as an example, where we
execute a simple program that simply lists the directory contents and
calls open() on every listed file:
With virus scanner running (coldcache):
$ ./a.exe /libexec/git-core/
before open (git-add.exe): 0.000000
after open (git-add.exe): 0.412873
before open (git-annotate.exe): 0.000175
after open (git-annotate.exe): 0.397925
before open (git-apply.exe): 0.000243
after open (git-apply.exe): 0.399996
before open (git-archive.exe): 0.000147
after open (git-archive.exe): 0.397783
before open (git-bisect--helper.exe): 0.000160
after open (git-bisect--helper.exe): 0.397700
before open (git-blame.exe): 0.000160
after open (git-blame.exe): 0.399136
...
With virus scanner running (hotcache):
$ ./a.exe /libexec/git-core/
before open (git-add.exe): 0.000000
after open (git-add.exe): 0.000325
before open (git-annotate.exe): 0.000229
after open (git-annotate.exe): 0.000177
before open (git-apply.exe): 0.000167
after open (git-apply.exe): 0.000150
before open (git-archive.exe): 0.000154
after open (git-archive.exe): 0.000156
before open (git-bisect--helper.exe): 0.000132
after open (git-bisect--helper.exe): 0.000180
before open (git-blame.exe): 0.000718
after open (git-blame.exe): 0.000724
...
With this patch I get:
$ time git help git
Launching default browser to display HTML ...
real 0m8.723s
user 0m0.000s
sys 0m0.000s
and without
$ time git help git
Launching default browser to display HTML ...
real 1m37.734s
user 0m0.000s
sys 0m0.031s
both tests with cold cache and giving the machine some time to settle
down after restart.
[jes: adjusted the commit message]
Signed-off-by: Heiko Voigt <heiko.voigt@mahr.de> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Executable files in Windows need to have the extension '.exe', otherwise
they do not work. Extend the hooks to not just look at the hard coded
names, but also at the names extended by the custom STRIP_EXTENSION,
which is defined as '.exe' in Windows.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
pack-objects: convert recursion to iteration in break_delta_chain()
The break_delta_chain() function is recursive over the depth
of a given delta chain, which can lead to possibly running
out of stack space. Normally delta depth is quite small, but
if there _is_ a pathological case, this is where we would
find and fix it, so we should be more careful.
We can do it without recursion at all, but there's a little
bit of cleverness needed to do so. It's easiest to explain
by covering the less-clever strategies first.
The obvious thing to try is just keeping our own stack on
the heap. Whenever we would recurse, push the new entry onto
the stack and loop instead. But this gets tricky; when we
see an ACTIVE entry, we need to care if we just pushed it
(in which case it's a cycle) or if we just popped it (in
which case we dealt with its bases, and no we need to clear
the ACTIVE flag and compute its depth).
You can hack around that in various ways, like keeping a
"just pushed" flag, but the logic gets muddled. However, we
can observe that we do all of our pushes first, and then all
of our pops afterwards. In other words, we can do this in
two passes. First dig down to the base, stopping when we see
a cycle, and pushing each item onto our stack. Then pop the
stack elements, clearing the ACTIVE flag and computing the
depth for each.
This works, and is reasonably elegant. However, why do we
need the stack for the second pass? We can just walk the
delta pointers again. There's one complication. Popping the
stack went over our list in reverse, so we could compute the
depth of each entry by incrementing the depth of its base,
which we will have just computed. To go forward in the
second pass, we have to compute the total depth on the way
down, and then assign it as we go.
This patch implements this final strategy, because it not
only keeps the memory off the stack, but it eliminates it
entirely. Credit for the cleverness in that approach goes to
Michael Haggerty; bugs are mine.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
pack-objects: enforce --depth limit in reused deltas
Since 898b14c (pack-objects: rework check_delta_limit usage,
2007-04-16), we check the delta depth limit only when
figuring out whether we should make a new delta. We don't
consider it at all when reusing deltas, which means that
packing once with --depth=250, and then again with
--depth=50, the second pack may still contain chains larger
than 50.
This is generally considered a feature, as the results of
earlier high-depth repacks are carried forward, used for
serving fetches, etc. However, since we started using
cross-pack deltas in c9af708b1 (pack-objects: use mru list
when iterating over packs, 2016-08-11), we are no longer
bounded by the length of an existing delta chain in a single
pack.
Here's one particular pathological case: a sequence of N
packs, each with 2 objects, the base of which is stored as a
delta in a previous pack. If we chain all the deltas
together, we have a cycle of length N. We break the cycle,
but the tip delta is still at depth N-1.
This is less unlikely than it might sound. See the included
test for a reconstruction based on real-world actions. I
ran into such a case in the wild, where a client was rapidly
sending packs, and we had accumulated 10,000 before doing a
server-side repack. The pack that "git repack" tried to
generate had a very deep chain, which caused pack-objects to
run out of stack space in the recursive write_one().
This patch bounds the length of delta chains in the output
pack based on --depth, regardless of whether they are caused
by cross-pack deltas or existed in the input packs. This
fixes the problem, but does have two possible downsides:
1. High-depth aggressive repacks followed by "normal"
repacks will throw away the high-depth chains.
In the long run this is probably OK; investigation
showed that high-depth repacks aren't actually
beneficial, and we dropped the aggressive depth default
to match the normal case in 07e7dbf0d (gc: default
aggressive depth to 50, 2016-08-11).
2. If you really do want to store high-depth deltas on
disk, they may be discarded and new delta computed when
serving a fetch, unless you set pack.depth to match
your high-depth size.
The implementation uses the existing search for delta
cycles. That lets us compute the depth of any node based on
the depth of its base, because we know the base is DFS_DONE
by the time we look at it (modulo any cycles in the graph,
but we know there cannot be any because we break them as we
see them).
There is some subtlety worth mentioning, though. We record
the depth of each object as we compute it. It might seem
like we could save the per-object storage space by just
keeping track of the depth of our traversal (i.e., have
break_delta_chains() report how deep it went). But we may
visit an object through multiple delta paths, and on
subsequent paths we want to know its depth immediately,
without having to walk back down to its final base (doing so
would make our graph walk quadratic rather than linear).
Likewise, one could try to record the depth not from the
base, but from our starting point (i.e., start
recursion_depth at 0, and pass "recursion_depth + 1" to each
invocation of break_delta_chains()). And then when
recursion_depth gets too big, we know that we must cut the
delta chain. But that technique is wrong if we do not visit
the nodes in topological order. In a chain A->B->C, it
if we visit "C", then "B", then "A", we will never recurse
deeper than 1 link (because we see at each node that we have
already visited it).
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
doc: clarify distinction between sign-off and pgp-signing
The documentation for submission discourages pgp-signing, but demands
a proper sign-off by contributors. However, when skimming the headings,
the wording of the section for sign-off could mistakenly be understood
as concerning pgp-signing. Thus, new contributors could oversee the
necessary sign-off.
This commit improves the wording such that the section about sign-off
cannot be misunderstood as pgp-signing. In addition, the paragraph about
pgp-signing is changed such that it avoids the impression that
pgp-signing could be relevant at later stages of the submission.
Signed-off-by: Cornelius Weig <cornelius.weig@tngtech.com> Helped-by: Philip Oakley <philipoakley@iee.org> Helped-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
test-lib: on FreeBSD, look for unzip(1) in /usr/local/bin/
Eric Wong reported that while FreeBSD has a /usr/bin/unzip, it uses
different semantics from those that are needed by Git's tests: When
passing the -a option to Info-Zip, it heeds the text attribute of the
.zip file's central directory, while FreeBSD's unzip ignores that
attribute.
The common work-around is to install Info-Zip on FreeBSD, into
/usr/local/bin/.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Tested-by: Eric Wong <e@80x24.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t/Makefile: add a rule to re-run previously-failed tests
This patch automates the process of determining which tests failed
previously and re-running them.
While developing patch series, it is a good practice to run the test
suite from time to time, just to make sure that obvious bugs are caught
early. With complex patch series, it is common to run `make -j15 -k
test`, i.e. run the tests in parallel and *not* stop at the first
failing test but continue. This has the advantage of identifying
possibly multiple problems in one big test run.
It is particularly important to reduce the turn-around time thusly on
Windows, where the test suite spends 45 minutes on the computer on which
this patch was developed.
It is the most convenient way to determine which tests failed after
running the entire test suite, in parallel, to look for left-over "trash
directory.t*" subdirectories in the t/ subdirectory. However, those
directories might live outside t/ when overridden using the
--root=<directory> option, to which the Makefile has no access. The next
best method is to grep explicitly for failed tests in the test-results/
directory, which the Makefile *can* access.
Please note that the often-recommended `prove` tool requires Perl, and
that opens a whole new can of worms on Windows. As no native Windows Perl
comes with Subversion bindings, we have to use a Perl in Git for Windows
that uses the POSIX emulation layer named MSYS2 (which is a portable
version of Cygwin). When using this emulation layer under stress, e.g.
when running massively-parallel tests, unexplicable crashes occur quite
frequently, and instead of having a solution to the original problem, the
developer now has an additional, quite huge problem. For that reason, this
developer rejected `prove` as a solution and went with this patch instead.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Reviewed-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apply the semantic patch for converting callers that duplicate the
result of absolute_path() to call absolute_pathdup() instead, which
avoids an extra string copy to a static buffer.
Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a function that returns a buffer containing the absolute path of its
argument and a semantic patch for its intended use. It avoids an extra
string copy to a static buffer.
Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
status: be prepared for not-yet-started interactive rebase
Some developers might want to call `git status` in a working
directory where they just started an interactive rebase, but the
edit script is still opened in the editor.
Let's show a meaningful message in such cases.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
One of these two may have originally been named after "what exact
SSH implementation do we have?" so that we can tweak the command
line options for that exact implementation. But "putty=1" no longer
means "We are using the plink SSH implementation that comes with
PuTTY" these days. It is set when we guess that either PuTTY plink
or Tortoiseplink is in use.
Rename them after what effect is desired. The current 'putty'
option is about using "-P <port>" when OpenSSH would use "-p <port>",
so rename it to 'port_option' whose value is either 'p' or 'P". The
other one is about passing an extra command line option "-batch",
so rename it to 'needs_batch'.
[jes: wrapped overly-long line]
Signed-off-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
submodule update: run custom update script for initial populating as well
In 1b4735d9f3 (submodule: no [--merge|--rebase] when newly cloned,
2011-02-17), all actions were defaulted to checkout for populating
a submodule initially, because merging or rebasing makes no sense
in that situation.
Other commands however do make sense, such as the custom command
that was added later (6cb5728c43, submodule update: allow custom
command to update submodule working tree, 2013-07-03).
I am unsure about the "none" command, as I can see an initial
checkout there as a useful thing. On the other hand going strictly
by our own documentation, we should do nothing in case of "none"
as well, because the user asked for it.
Reported-by: Han-Wen Nienhuys <hanwen@google.com> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
submodule absorbing: fix worktree/gitdir pointers recursively for non-moves
Consider having a submodule 'sub' and a nested submodule at 'sub/nested'.
When nested is already absorbed into sub, but sub is not absorbed into
its superproject, then we need to fixup the gitfile and core.worktree
setting for 'nested' when absorbing 'sub', but we do not need to move
its git dir around.
Previously 'nested's gitfile contained "gitdir: ../.git/modules/nested";
it has to be corrected to "gitdir: ../../.git/modules/sub1/modules/nested".
An alternative I considered to do this work lazily, i.e. when resolving
"../.git/modules/nested", we would notice the ".git" being a gitfile
linking to another path. That seemed to be robuster by design, but harder
to get the implementation right. Maybe we have to do that anyway once we
try to have submodules and worktrees working nicely together, but for now
just produce 'correct' (i.e. direct) pointers.
Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
cache.h: expose the dying procedure for reading gitlinks
In a later patch we want to react to only a subset of errors, defaulting
the rest to die as usual. Separate the block that takes care of dying
into its own function so we have easy access to it.
Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
This follows a93bedada (setup: add gentle version of read_gitfile,
2015-06-09), and assumes the same reasoning. resolve_git_dir is unsuited
for speculative calls, so we want to use the gentle version to find out
about potential errors.
Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The recent fixes to "fsck --connectivity-only" load all of
the objects with their correct types. This keeps the
connectivity-only code path close to the regular one, but it
also introduces some unnecessary inefficiency. While getting
the type of an object is cheap compared to actually opening
and parsing the object (as the non-connectivity-only case
would do), it's still not free.
For reachable non-blob objects, we end up having to parse
them later anyway (to see what they point to), making our
type lookup here redundant.
For unreachable objects, we might never hit them at all in
the reachability traversal, making the lookup completely
wasted. And in some cases, we might have quite a few
unreachable objects (e.g., when alternates are used for
shared object storage between repositories, it's normal for
there to be objects reachable from other repositories but
not the one running fsck).
The comment in mark_object_for_connectivity() claims two
benefits to getting the type up front:
1. We need to know the types during fsck_walk(). (And not
explicitly mentioned, but we also need them when
printing the types of broken or dangling commits).
We can address this by lazy-loading the types as
necessary. Most objects never need this lazy-load at
all, because they fall into one of these categories:
a. Reachable from our tips, and are coerced into the
correct type as we traverse (e.g., a parent link
will call lookup_commit(), which converts OBJ_NONE
to OBJ_COMMIT).
b. Unreachable, but not at the tip of a chunk of
unreachable history. We only mention the tips as
"dangling", so an unreachable commit which links
to hundreds of other objects needs only report the
type of the tip commit.
2. It serves as a cross-check that the coercion in (1a) is
correct (i.e., we'll complain about a parent link that
points to a blob). But we get most of this for free
already, because right after coercing, we'll parse any
non-blob objects. So we'd notice then if we expected a
commit and got a blob.
The one exception is when we expect a blob, in which
case we never actually read the object contents.
So this is a slight weakening, but given that the whole
point of --connectivity-only is to sacrifice some data
integrity checks for speed, this seems like an
acceptable tradeoff.
Here are before and after timings for an extreme case with
~5M reachable objects and another ~12M unreachable (it's the
torvalds/linux repository on GitHub, connected to shared
storage for all of the other kernel forks):
[before]
$ time git fsck --no-dangling --connectivity-only
real 3m4.323s
user 1m25.121s
sys 1m38.710s
[after]
$ time git fsck --no-dangling --connectivity-only
real 0m51.497s
user 0m49.575s
sys 0m1.776s
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
fsck: move typename() printing to its own function
When an object has a problem, we mention its type. But we do
so by feeding the result of typename() directly to
fprintf(). This is potentially dangerous because typename()
can return NULL for some type values (like OBJ_NONE).
It's doubtful that this can be triggered in practice with
the current code, so this is probably not fixing a bug. But
it future-proofs us against modifications that make things
like OBJ_NONE more likely (and gives future patches a
central point to handle them).
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The files in contrib/examples are meant to illustrate "you could
combine plumbing commands to implement something like these"; this
is an opposite and is an example of what not to do, e.g. accessing
the object store directly bypassing Git.
Remove it.
Suggested-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Back in the olden days, when all objects were loose and rubber boots were
made out of wood, it made sense to try to share (immutable) objects
between repositories.
Ever since the arrival of pack files, it is but an anachronism.
Let's move the script to the contrib/examples/ directory and no longer
offer it.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
connect: handle putty/plink also in GIT_SSH_COMMAND
Git for Windows has special support for the popular SSH client PuTTY:
when using PuTTY's non-interactive version ("plink.exe"), we use the -P
option to specify the port rather than OpenSSH's -p option. TortoiseGit
ships with its own, forked version of plink.exe, that adds support for
the -batch option, and for good measure we special-case that, too.
However, this special-casing of PuTTY only covers the case where the
user overrides the SSH command via the environment variable GIT_SSH
(which allows specifying the name of the executable), not
GIT_SSH_COMMAND (which allows specifying a full command, including
additional command-line options).
When users want to pass any additional arguments to (Tortoise-)Plink,
such as setting a private key, they are required to either use a shell
script named plink or tortoiseplink or duplicate the logic that is
already in Git for passing the correct style of command line arguments,
which can be difficult, error prone and annoying to get right.
This patch simply reuses the existing logic and expands it to cover
GIT_SSH_COMMAND, too.
Note: it may look a little heavy-handed to duplicate the entire
command-line and then split it, only to extract the name of the
executable. However, this is not a performance-critical code path, and
the code is much more readable this way.
Signed-off-by: Segev Finer <segev208@gmail.com> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
difftool: hack around -Wzero-length-format warning
Building with "gcc -Wall" will complain that the format in:
warning("")
is empty. Which is true, but the warning is over-eager. We
are calling the function for its side effect of printing
"warning:", even with an empty string.
Our DEVELOPER Makefile knob disables the warning, but not
everybody uses it. Let's silence the warning in the code so
that nobody reports it or tries to "fix" it.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the future we want to support working tree operations within submodules,
e.g. "git checkout --recurse-submodules", which will update the submodule
to the commit as recorded in its superproject. In the submodule the
unpack-tree operation is carried out as usual, but the reporting to the
user needs to prefix any path with the superproject. The mechanism for
this is the super-prefix. (see 74866d757, git: make super-prefix option)
Add support for the super-prefix option for commands that unpack trees
by wrapping any path output in unpacking trees in the newly introduced
super_prefixed function. This new function prefixes any path with the
super-prefix if there is one. Assuming the submodule case doesn't happen
in the majority of the cases, we'd want to have a fast behavior for no
super prefix, i.e. no reallocation/copying, but just returning path.
Another aspect of introducing the `super_prefixed` function is to consider
who owns the memory and if this is the right place where the path gets
modified. As the super prefix ought to change the output behavior only and
not the actual unpack tree part, it is fine to be that late in the line.
As we get passed in 'const char *path', we cannot change the path itself,
which means in case of a super prefix we have to copy over the path.
We need two static buffers in that function as the error messages
contain at most two paths.
For testing purposes enable it in read-tree, which has no output
of paths other than an unpack-trees.c. These are all converted in
this patch.
Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The loose objects are created with mode 0444. That doesn't
prevent them being overwritten by rename(), but some
versions of "mv" will be extra careful and prompt the user,
even without "-i".
Reportedly macOS does this, at least in the Travis builds.
The prompt reads from /dev/null, defaulting to "no", and the
object isn't moved. Then to make matters even more
interesting, it still returns "0" and the rest of the test
proceeds, but with a broken setup.
We can work around it by using "mv -f" to override the
prompt. This should work as it's already used in t5504 for
the same purpose.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>