"git diff <blob> <blob>" was not documented and was only hinted as
an extension to "git diff <commit> <commit> -- <pathspec>", but
comparison between two blobs are more special than that. It does
not take any pathspec to begin with.
* sl/git-svn-docs:
git-svn: Note about tags.
git-svn: Expand documentation for --follow-parent
git-svn: Recommend use of structure options.
git-svn: Document branches with at-sign(@).
* jk/mailmap-cleanup:
contrib: update stats/mailmap script
.mailmap: normalize emails for Linus Torvalds
.mailmap: normalize emails for Jeff King
.mailmap: fix broken entry for Martin Langhoff
.mailmap: match up some obvious names/emails
As it was not a common operation, it was described as if it is a
side note for the more common two-commit variant, but this mode
behaves very differently, e.g. it does not make any sense to ask
recursive behaviour, or give the command a pathspec.
t7004: do not create unneeded gpghome/gpg.conf when GPG is not used
These tests themselves are properly protected by the GPG
prerequisite, but one of the set-up steps outside the
test_expect_success block unconditionally assumed that there is a
gpghome/ directory, which is not true if GPG is not being used.
It may be a good idea to move the whole set-up steps in the test but
that is a follow-up topic.
The forms of checkout that do not take a path are lumped together in
the DESCRIPTION section, but the description for this group is
dominated by explanation of the -b|-B form.
Split these apart for more clarity.
Signed-off-by: Chris Rorvick <chris@rorvick.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git log -p -S<string>" now looks for the <string> after applying
the textconv filter (if defined); earlier it inspected the contents
of the blobs without filtering.
SubmittingPatches: add convention of prefixing commit messages
Conscientious newcomers to git development will read SubmittingPatches
and CodingGuidelines, but could easily miss the convention of
prefixing commit messages with a single word identifying the file
or area the commit touches.
Signed-off-by: Adam Spiers <git@adamspiers.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Documentation: don't link to example mail addresses
Email addresses in documentation are converted into mailto: hyperlinks
in the HTML output and footnotes in man pages. This isn't desirable for
cases where the address is used as an example and is not valid.
Particularly annoying is the example "jane@laptop.(none)" which appears
in git-shortlog(1) as "jane@laptop[1].(none)", with note 1 saying:
1. jane@laptop
mailto:jane@laptop
Fix this by escaping these email addresses with a leading backslash, to
prevent Asciidoc expanding them as inline macros.
In the case of mailmap.txt, render the address monospaced so that it
matches the block examples surrounding that paragraph.
Helped-by: Jeff King <peff@peff.net> Signed-off-by: John Keeping <john@keeping.me.uk> Signed-off-by: Junio C Hamano <gitster@pobox.com>
README: it does not matter who the current maintainer is
The audience of this introductory document does not have to know nor
interact with the maintainer, so drop the mention of him. Other
documents such as SubmittingPatches may be a more suitable place to
have it.
In remote-test-svn, there is a parse_rev_note function to
parse lines of the form "Revision-number" from notes. If it
finds such a line and parses it, it returns 0, copying the
value into a "struct rev_note". If it finds an entry that is
garbled or out of range, it returns -1 to signal an error.
However, if it does not find any "Revision-number" line at
all, it returns success but does not put anything into the
rev_note. So upon a successful return, the rev_note may or
may not be initialized, and the caller has no way of
knowing.
gcc does not usually catch the use of the unitialized
variable because the conditional assignment happens in a
separate function from the point of use. However, when
compiling with -O3, gcc will inline parse_rev_note and
notice the problem.
We can fix it by returning "-1" when no note is found (so on
a zero return, we always found a valid value).
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Explain that --tags is just like another explicit refspec on the
command line and as such overrides the default refspecs configured
via the remote.$name.fetch variable.
git.txt: add missing info about --git-dir command-line option
Unlike other environment variables (e.g. GIT_WORK_TREE, GIT_NAMESPACE),
the Documentation/git.txt file did not mention that the GIT_DIR
environment variable can also be set using the --git-dir command line
option.
Signed-off-by: Manlio Perillo <manlio.perillo@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
A cache-tree entry with a negative entry count is considered invalid
by the current Git; it records that we do not know the object name
of a tree that would result by writing the directory covered by the
cache-tree as a tree object.
Clarify that any entry with a negative entry count is invalid, but
the implementations must write -1 there. This way, we can later
decide to allow writers to use negative values other than -1 to
encode optional information on such invalidated entries without
harming interoperability; we do not know what will be encoded and
how, so we keep these other negative values as reserved for now.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
1. The original parsed the mailmap file itself, and it did
it wrong (it did not understand entries with an extra
email key).
Instead, this version uses git's "%aE" and "%aN"
formats to have git perform the mapping, meaning we do
not have to read .mailmap at all, but still operate on
the current state that git sees (and it also works
properly from subdirs).
2. The original would find multiple names for an email,
but not the other way around.
This version can do either or both. If we find multiple
emails for a name, the resolution is less obvious than
the other way around. However, it can still be a
starting point for a human to investigate.
3. The original would order only by count, not by recency.
This version can do either. Combined with showing the
counts, it can be easier to decide how to resolve.
4. This version shows similar entries in a blank-delimited
stanza, which makes it more clear which options you are
picking from.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Linus used a lot of different per-machine email addresses in
the early days. This means that "git shortlog -nse" does not
aggregate his counts, and he is listed well below where he
should be (8th instead of 3rd).
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit adc3192 (Martin Langhoff has a new e-mail address,
2010-10-05) added a mailmap entry, but forgot that both the
old and new email addresses need to appear for one to be
mapped to the other (i.e., we do not key mailmap emails by
name).
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch updates git's .mailmap in cases where multiple
names are matched to a single email. The "master" name for
each email was chosen by:
1. If the only difference is in the presence or absence
of accented characters, the accented form is chosen
(under the assumption that it is the natural spelling,
and accents are sometimes stripped in email).
2. Otherwise, the most commonly used name is chosen.
3. If all names are equally common, the most recently used name is
chosen.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The description of __git_ps1 function operating in two-arg mode was
not very clear. It said "set PROMPT_COMMAND=__git_ps1" which is not
the right usage for this mode, followed by "To customize the prompt,
do this", giving a false impression that those who do not want to
customize it can get away with no-arg form, which was incorrect.
Make it clear that this mode always takes two arguments, pre and
post, with an example.
The straight-forward one should be listed as the primary usage, and
the confusing one should be an alternate for advanced users. Swap
the order of these two.
Acked-by: Simon Oosthoek <s.oosthoek@xs4all.nl> Signed-off-by: Junio C Hamano <gitster@pobox.com>
For bash completion, the option '-o bashdefault' is used to indicate
that when no other choices are available, file completion should be
performed. Since this option is not available in tcsh, no file
completion is ever performed. Therefore, commands like 'git add ',
'git send-email ', etc, require the user to manually type out
the file name. This can be quite annoying.
To improve the user experience we try to simulate file completion
directly in this script (although not perfectly).
The known issues with the file completion simulation are:
- Possible completions are shown with their directory prefix.
- Completions containing shell variables are not handled.
- Completions with ~ as the first character are not handled.
Signed-off-by: Marc Khouzam <marc.khouzam@ericsson.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
MinGW has a workaround when rmdir unnecessarily fails to retry with
a prompt, but the logic was kicking in when the rmdir failed with
ENOTEMPTY, i.e. was expected to fail and there is no point retrying.
* ef/mingw-rmdir:
mingw_rmdir: do not prompt for retry when non-empty
* ef/mingw-tty-getpass:
mingw: get rid of getpass implementation
mingw: reuse tty-version of git_terminal_prompt
compat/terminal: separate input and output handles
compat/terminal: factor out echo-disabling
mingw: make fgetc raise SIGINT if apropriate
mingw: correct exit-code for SIGALRM's SIG_DFL
Makefile: whitespace style fixes in macro definitions
Consistently use a single space before and after the "=" (or ":=", "+=",
etc.) in assignments to make macros. Granted, this was not a big deal,
but I did find the needless inconsistency quite distracting.
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
mingw_rmdir: do not prompt for retry when non-empty
in ab1a11be ("mingw_rmdir: set errno=ENOTEMPTY when appropriate"),
a check was added to prevent us from retrying to delete a directory
that is both in use and non-empty.
However, this logic was slightly flawed; since we didn't return
immediately, we end up falling out of the retry-loop, but right into
the prompting-loop.
Fix this by setting errno, and guarding the prompting-loop with an
errno-check.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git(1): remove a defunct link to "list of authors"
The linked page has not been showing the promised "more complete
list" for more than 6 months by now, and nobody has resurrected
the list there nor elsewhere since then.
Documentation/diff-config: work around AsciiDoc misfortune
The line that happens to begin with indent followed by "3. " was
interpreted as if it was an enumerated list; just wrap the lines
differently to work it around for now.
Various codepaths checked if two encoding names are the same using
ad-hoc code and some of them ended up asking iconv() to convert
between "utf8" and "UTF-8". The former is not a valid way to spell
the encoding name, but often people use it by mistake, and we
equated them in some but not all codepaths. Introduce a new helper
function to make these codepaths consistent.
* jc/same-encoding:
reencode_string(): introduce and use same_encoding()
Merge branch 'lt/diff-stat-show-0-lines' into maint
"git diff --stat" miscounted the total number of changed lines when
binary files were involved and hidden beyond --stat-count. It also
miscounted the total number of changed files when there were
unmerged paths.
* lt/diff-stat-show-0-lines:
t4049: refocus tests
diff --shortstat: do not count "unmerged" entries
diff --stat: do not count "unmerged" entries
diff --stat: move the "total count" logic to the last loop
diff --stat: use "file" temporary variable to refer to data->files[i]
diff --stat: status of unmodified pair in diff-q is not zero
test: add failing tests for "diff --stat" to t4049
Fix "git diff --stat" for interesting - but empty - file changes
git-remote-helpers.txt: clarify options & ref list attributes
The documentation was misleading in that it gave the impression that
'for-push' could be used as a ref attribute in the output of the
'list' command. That is wrong.
Also, explicitly point out the connection between the commands
'list' and 'options' on the one hand, and the sections
'REF LIST ATTRIBUTES' and 'OPTIONS' on the other hand.
Signed-off-by: Max Horn <max@quendi.de> Acked-by: Sverre Rabbelier <srabbelier@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
In particular, document 'list for-push' separately from 'list', as
the former needs only be supported for the push/export
capabilities, and the latter only for fetch/import. Indeed, a
hypothetically 'push-only' helper would only need to support the
former, not the latter.
Signed-off-by: Max Horn <max@quendi.de> Acked-by: Sverre Rabbelier <srabbelier@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-remote-helpers.txt: document invocation before input format
In the distant past, the order things were documented was
'Invocation', 'Commands', 'Capabilities', ...
Then it was decided that before giving a list of Commands, there
should be an overall description of the 'Input format', which was
a wise decision. However, this description was put as the very
first thing, with the rationale that any implementor would want
to know that first.
However, it seems an implementor would actually first need to
know how the remote helper will be invoked, so moving
'Invocation' to the front again seems logical. Moreover, we now
don't switch from discussing the input format to the invocation
style and then back to input related stuff.
Signed-off-by: Max Horn <max@quendi.de> Acked-by: Sverre Rabbelier <srabbelier@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Translate 825 new messages came from git.pot update in cc76011 ("l10n: Update git.pot (825 new, 24 removed messages)").
Signed-off-by: Ralf Thielow <ralf.thielow@gmail.com> Reviewed-by: Thomas Rast <trast@student.ethz.ch> Helped-by: Michael J Gruber <git@drmicha.warpmail.net>
Document that 'git svn' will import SVN tags as branches.
Signed-off-by: Sebastian Leske <sebastian.leske@sleske.name> Acked-by: Eric Wong <normalperson@yhbt.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Describe what the option --follow-parent does, and what happens if it is
set or unset.
Signed-off-by: Sebastian Leske <sebastian.leske@sleske.name> Acked-by: Eric Wong <normalperson@yhbt.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Document that when using git svn, one should usually either use the
directory structure options to import branches as branches, or only
import one subdirectory. The default behaviour of cloning all branches
and tags as subdirectories in the working copy is usually not what the
user wants.
Signed-off-by: Sebastian Leske <sebastian.leske@sleske.name> Acked-by: Eric Wong <normalperson@yhbt.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git svn sometimes creates branches with an at-sign in the name
(branchname@revision). These branches confuse many users and it is a FAQ
why they are created. Document when git svn creates them.
Signed-off-by: Sebastian Leske <sebastian.leske@sleske.name> Acked-by: Eric Wong <normalperson@yhbt.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The getpass-implementation we use on Windows isn't at all ideal;
it works in raw-mode (as opposed to cooked mode), and as a result
does not deal correcly with deletion, arrow-keys etc.
Instead, use cooked mode to read a line at the time, allowing the
C run-time to process the input properly.
Since we set files to be opened in binary-mode by default on
Windows, introduce a FORCE_TEXT macro that expands to the "t"
modifier that forces the terminal to be opened in text-mode so we
do not have to deal with CRLF issues.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
compat/terminal: separate input and output handles
On Windows, the terminal cannot be opened in read-write mode, so
we need distinct pairs for reading and writing. Since this works
fine on other platforms as well, always open them in pairs.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
status: respect advice.statusHints for ahead/behind advice
If the user has unset advice.statusHints, we already
suppress the "use git reset to..." hints in each stanza. The
new "use git push to publish..." hint is the same type of
hint. Let's respect statusHints for it, rather than making
the user set yet another advice flag.
Signed-off-by: Jeff King <peff@peff.net> Acked-by: Matthieu Moy <Matthieu.Moy@grenoble-inp.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
- Enclose tests in single quotes as opposed to double quotes. This is
the prevalent style in other tests.
- Remove the unused variable $head4_full.
- Indent the expected output so that it lines up with the rest of the
test text.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of "cd there and then come back", use the "cd there in a
subshell" pattern. Also fix '&&' chaining in one place.
Suggested-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
`git rev-list --max-count=1 HEAD` is a roundabout way of saying `git
rev-parse --verify HEAD`; replace a bunch of instances of the former
with the latter. Also, don't unnecessarily `cut -c1-7` the rev-parse
output when the `--short` option is available.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git diff --stat" miscounted the total number of changed lines when
binary files were involved and hidden beyond --stat-count. It also
miscounted the total number of changed files when there were
unmerged paths.
* lt/diff-stat-show-0-lines:
t4049: refocus tests
diff --shortstat: do not count "unmerged" entries
diff --stat: do not count "unmerged" entries
diff --stat: move the "total count" logic to the last loop
diff --stat: use "file" temporary variable to refer to data->files[i]
diff --stat: status of unmodified pair in diff-q is not zero
test: add failing tests for "diff --stat" to t4049
* fc/remote-hg: (22 commits)
remote-hg: fix for older versions of python
remote-hg: fix for files with spaces
remote-hg: avoid bad refs
remote-hg: try the 'tip' if no checkout present
remote-hg: fix compatibility with older versions of hg
remote-hg: add missing config for basic tests
remote-hg: the author email can be null
remote-hg: add option to not track branches
remote-hg: add extra author test
remote-hg: add tests to compare with hg-git
remote-hg: add bidirectional tests
test-lib: avoid full path to store test results
remote-hg: add basic tests
remote-hg: fake bookmark when there's none
remote-hg: add compat for hg-git author fixes
remote-hg: add support for hg-git compat mode
remote-hg: match hg merge behavior
remote-hg: make sure the encoding is correct
remote-hg: add support to push URLs
remote-hg: add support for remote pushing
...
* km/send-email-remove-cruft-in-address:
git-send-email: allow edit invalid email address
git-send-email: ask what to do with an invalid email address
git-send-email: remove invalid addresses earlier
git-send-email: fix fallback code in extract_valid_address()
git-send-email: remove garbage after email address
General clean-ups in various areas, originally written to support a
patch that later turned out to be unneeded.
* jk/send-email-sender-prompt:
t9001: check send-email behavior with implicit sender
t: add tests for "git var"
ident: keep separate "explicit" flags for author and committer
ident: make user_ident_explicitly_given static
t7502: factor out autoident prerequisite
test-lib: allow negation of prerequisites