* rs/decorate:
add '%d' pretty format specifier to show decoration
move load_ref_decorations() to log-tree.c and export it
log: add load_ref_decorations()
* cc/bisect:
bisect: remove "checkout_done" variable used when checking merge bases
bisect: only check merge bases when needed
bisect: test merge base if good rev is not an ancestor of bad rev
The object oriented version of File::Temp is a rather new incarnation it
seems. The File::Temp man page for v5.8.0 says "(NOT YET IMPLEMENTED)" in
the 'Objects' section. Instead of creating a file with a unique name in
the system TMPDIR, we can create our own temporary file with a static
name and use that instead.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil> Tested-by: Tom G. Christensen <tgc@statsbiblioteket.dk> on RHEL 3, Perl 5.8.0 Signed-off-by: Junio C Hamano <gitster@pobox.com>
t9700/test.pl: avoid bareword 'STDERR' in 3-argument open()
Some versions of perl complain when 'STDERR' is used as the third argument
in the 3-argument form of open(). Convert to the 2-argument form which is
described for duping STDERR in my second edition camel book.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil> Tested-by: Tom G. Christensen <tgc@statsbiblioteket.dk> on RHEL 3, Perl 5.8.0 Signed-off-by: Junio C Hamano <gitster@pobox.com>
This augments 3632cfc24 (Use compatibility regex library on Darwin,
2008-09-07), which already carries a "Tested-by" statement for AIX,
but that test was actually done with this patch included.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at> Tested-by: Mike Ralphson <mike@abacus.co.uk> Signed-off-by: Junio C Hamano <gitster@pobox.com>
separate build targets for man and html documentation
This introduces new build targets "man" and "html" which allow building
the documentation in the respective formats separately. This helps
people with a partial documentation build chain: html pages can be built
without xmlto.
This is documented in INSTALL now, together with corrections: Before,
instructions in INSTALL would build man+html but install man only. Now
the instructions build and install both, and new and pre-existing
targets are explained.
Note that build targets "doc" and "man" correspond to install targets
"install-doc install-html" and "install-doc" respectively. This
inconsistency is not changed, in order to keep everyone's build scripts
from breaking.
Signed-off-by: Michael J Gruber <michaeljgruber+gmane@fastmail.fm> Signed-off-by: Junio C Hamano <gitster@pobox.com>
allow installation of man and html doc from the man and html branches
This patch introduces a make target "quick-install-html" which installs
the html documentation from the branch origin/html, without the need for
asciidoc/xmlto. This is analogous to the existing "quick-install-doc"
target for the man pages.
We advertise these targets in the INSTALL file now.
Signed-off-by: Michael J Gruber <michaeljgruber+gmane@fastmail.fm> Signed-off-by: Junio C Hamano <gitster@pobox.com>
140b378 (Teach git diff-tree --stdin to diff trees, 2008-08-10) broke the
more important case of reading series of commits to filter ones that touch
given pathspecs.
Noticed by Mark Levedahl, running "gitk ec3a4ba" and trying to focus on
commits that touch "t/" directory.
* maint:
Update draft release notes for 1.6.0.2
Use compatibility regex library for OSX/Darwin
git-svn: Fixes my() parameter list syntax error in pre-5.8 Perl
Git.pm: Use File::Temp->tempfile instead of ->new
t7501: always use test_cmp instead of diff
The standard libc regex library on OSX does not support alternation
in POSIX Basic Regular Expression mode. This breaks the diff.funcname
functionality on OSX.
To fix this, we use the GNU regex library which is already present in
the compat/ diretory for the MinGW port. However, simply adding compat/
to the COMPAT_CFLAGS variable causes a conflict between the system
fnmatch.h and the one present in compat/. To remedy this, move the
regex and fnmatch functionality to their own subdirectories in compat/
so they can be included seperately.
Signed-off-by: Arjen Laarhoven <arjen@yaph.org> Tested-by: Mike Ralphson <mike@abacus.co.uk> (AIX) Tested-by: Johannes Sixt <johannes.sixt@telecom.at> (MinGW) Signed-off-by: Junio C Hamano <gitster@pobox.com>
Perl 5.8.0 ships with File::Temp 0.13, which does not have the new()
interface introduced in 0.14, as pointed out by Tom G. Christensen.
This modifies Git.pm to use the more established tempfile() interface
and updates 'git svn' to match.
Signed-off-by: Marcus Griep <marcus@griep.us> Acked-by: Eric Wong <normalperson@yhbt.net> Tested-by: Tom G. Christensen <tgc@statsbiblioteket.dk> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* np/maint-safer-pack:
fixup_pack_header_footer(): use nicely aligned buffer sizes
index-pack: use fixup_pack_header_footer()'s validation mode
pack-objects: use fixup_pack_header_footer()'s validation mode
improve reliability of fixup_pack_header_footer()
pack-objects: improve returned information from write_one()
The logic to checkout a different commit implements the safety to never
lose user's local changes. For example, switching from a commit to
another commit, when you have changed a path that is different between
them, need to merge your changes to the version from the switched-to
commit, which you may not necessarily be able to resolve easily. By
default, "git checkout" refused to switch branches, to give you a chance
to stash your local changes (or use "-m" to merge, accepting the risks of
getting conflicts).
This safety, however, had one deliberate hole since early June 2005. When
your local change was to remove a path (and optionally to stage that
removal), the command checked out the path from the switched-to commit
nevertheless.
This was to allow an initial checkout to happen smoothly (e.g. an initial
checkout is done by starting with an empty index and switching from the
commit at the HEAD to the same commit). We can tighten the rule slightly
to allow this special case to pass, without losing sight of removal
explicitly done by the user, by noticing if the index is truly empty when
the operation begins.
Use xmalloc() and friends to catch allocation failures
Some places use the standard malloc/strdup without checking if the
allocation was successful; they should use xmalloc/xstrdup that
check the memory allocation result.
Signed-off-by: Dotan Barak <dotanba@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix permission bits on sources checked out with an overtight umask
Two patches 9907721 (templates/Makefile: don't depend on local umask
setting, 2008-02-28) and 96cda0b (templates/Makefile: install is
unnecessary, just use mkdir -p, 2008-08-21) tried to prevent an overtight
umask the builder/installer might have from screwing over the installation
procedure, but we forgot there was another source of trouble. If the
person who checked out the source tree had an overtight umask, it will
leak out to the built products, which is propagated to the installation
destination.
git-rebase--interactive: auto amend only edited commit
"git rebase --continue" issued after git rebase being stop by "edit"
command is trying to amend the last commit using stage changes. However,
if the last commit is not the commit that was marked as "edit" then it
can produce unexpected results.
For instance, after being stop by "edit", I have made some changes to
commit message using "git commit --amend". After that I realized that
I forgot to add some changes to some file. So, I said "git add file"
and the "git rebase --continue". Unfortunately, it caused that the new
commit message was lost.
Another problem is that after being stopped at "edit", the user adds new
commits. In this case, automatic amend behavior of git rebase triggered
by some stage changes causes that not only that the log message of the
last commit is lost but that it will contain also wrong Author and Date
information.
Therefore, this patch restrict automatic amend only to the situation
where HEAD is the commit at which git rebase stop by "edit" command.
Signed-off-by: Dmitry Potapov <dpotapov@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-rebase-interactive: do not squash commits on abort
If git rebase interactive is stopped by "edit" command and then the user
said "git rebase --continue" while having some stage changes, git rebase
interactive is trying to amend the last commit by doing:
git --soft reset && git commit
However, the user can abort commit for some reason by providing an empty
log message, and that would leave the last commit undone, while the user
being completely unaware about what happened. Now if the user tries to
continue, by issuing "git rebase --continue" that squashes two previous
commits.
Signed-off-by: Dmitry Potapov <dpotapov@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t6023-merge-file: Work around non-portable sed usage
OS X sed doesn't understand '\n' on the right side of a substitution.
Use a valid substitution character instead and use 'tr' to convert
those to a newline.
Signed-off-by: Arjen Laarhoven <arjen@yaph.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The non-verbose output was not changed in fdb2a2a (compat: introduce
on_disk_bytes(), 2008-08-18) which caused git-count-objects to claim 512
times too much space used for loose objects.
The reason that git-shell was excluded from the Windows build was that
our compatibility layer needed stuff that was removed when we tried to
link less of the git library into git-shell. Since 4cfc24a (shell: do
not play duplicated definition games to shrink the executable,
2008-08-19) the complete library is linked again, so we can build
git-shell on Windows as well. (This fixes 'make install', which depends
on that git-shell is always built.)
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t/t91XX-svn: start removing use of "git-" from these tests
Subversion tests use too many "git-foo" form, so I am converting them
in two steps.
This first step replaces literal strings "remotes/git-svn" and "git-svn-id"
by introducing $remotes_git_svn and $git_svn_id constants defined as shell
variables. This will reduce the number of false hits from "git grep".
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Don't verify host name in SSL certs when GIT_SSL_NO_VERIFY is set
Originally from Mike Hommey; earlier we were disabling SSL_VERIFYPEER
but SSL_VERIFYHOST was in effect even when the user asked not to with
the environment variable.
git-svn: fix handling of even funkier branch names
Apparently do_switch() tolerates the lack of escaping in less
funky branch names. For the really strange and scary ones, we
need to escape them properly. It strangely maintains compatible
with the existing handling of branch names with spaces and
exclamation marks.
Reported-by: m.skoric@web.de ($gmane/94677) Signed-off-by: Eric Wong <normalperson@yhbt.net>
This function is outside POSIX (Linux and recent BSD have it). Replace it
with setvbuf() which is POSIX.
I am not sure about the value this patch passes as size argument to
setvbuf(), though. I know the call this patch makes is equivalent to
calling setlinebuf() with GNU libc, but POSIX itself leaves what happens
to the size argument quite vague, saying only "otherwise [i.e. when buf is
a null pointer], size _may_ determine the size of a buffer allocated by
the setvbuf() function." If passing size=0 causes stdio to allocate very
small buffer, and while stdio tries to line buffer the output, it might
make it to fail to buffer an entire line, causing early flushing of the
stream.
Even if that turns out to be a problem on minorority platforms, we won't
know it until the issue actually hurts them, so let's push this change out
and see what happens.
* git://git.bogomips.org/git-svn:
git-svn: set auto_props when renaming files
t9124: clean up chdir usage
git-svn: fix 'info' tests for unknown items
git-svn: match SVN 1.5 behaviour of info' on unknown item
git svn info: always quote URLs in 'info' output
git svn info: make info relative to the current directory
git svn info: tests: fix ptouch argument order in setup
git svn info: tests: use test_cmp instead of git-diff
git svn info: tests: do not use set -e
git svn info: tests: let 'init' test run with SVN 1.5
git svn: catch lack of upstream info for dcommit earlier
git-svn: check error code of send_txstream
git-svn: Send deltas during commits
git-svn: Introduce SVN::Git::Editor::_chg_file_get_blob
git-svn: extract base blob in generate_diff
diff --quiet: make it synonym to --exit-code >/dev/null
The point of --quiet was to return the status as early as possible without
doing any extra processing. Well behaved scripts, when they expect to run
many diff operations inside, are supposed to run "update-index --refresh"
upfront; we do not want them to pay the price of iterating over the index
and comparing the contents to fix the stat dirtiness, and we avoided most
of the processing in diffcore_std() when --quiet is in effect.
But scripts that adhere to the good practice won't have to pay any more
price than the necessary lstat(2) that will report stat cleanliness, as
long as only -q is given without any fancier diff options.
More importantly, users who do ask for "--quiet -M --filter=D" (in order
to notice only the deletion, not paths that disappeared only because they
have been renamed away) deserve to get the result they asked for, even it
means they have to pay the extra price; the alternative is to get a cheap
early return that gives a result they did not ask for, which is much
worse.
diff Porcelain: do not disable auto index refreshing on -C -C
When we enabled the automatic refreshing of the index to "diff" Porcelain,
we disabled it when --find-copies-harder was asked, but there is no good
reason to do so. In the following command sequence, the first "diff"
shows an "empty" diff exposing stat dirtyness, while the second one does
not.
Patch-by: Paul Talacko <gnuruandstuff@yahoo.co.uk>:
<http://article.gmane.org/gmane.comp.version-control.git/95006>
> Hello,
>
> There's an issue in git-svn as autoprops are not applied to
> renamed files, only to added files.
>
> This patch fixes the bug.
[ew: added test case] Signed-off-by: Eric Wong <normalperson@yhbt.net>
Merge updated git-gui and gitk that call each other
Merge git://repo.or.cz/git-gui and git://git.kernel.org/pub/scm/gitk/gitk
* git://repo.or.cz/git-gui:
git-gui: Show special diffs for complex conflict cases.
git-gui: Make F5 reselect a diff, if an untracked file is selected.
git-gui: Reimplement and enhance auto-selection of diffs.
git-gui: Support conflict states _U & UT.
git-gui: Support more merge tools.
git-gui: Don't allow staging files with conflicts.
git-gui: Support calling merge tools.
git-gui: Support resolving conflicts via the diff context menu.
git-gui: Mark forgotten strings for translation.
git-gui: Allow specifying an initial line for git gui blame.
git-gui: Better positioning in Blame Parent Commit
git-gui: Support passing blame to a parent commit.
git-gui: Support starting gitk from Gui Blame
git-gui: Teach git gui about file type changes
* git://git.kernel.org/pub/scm/gitk/gitk:
gitk: Add menu item for calling git gui blame
gitk: Add option to specify the default commit on command line
* maint:
Update draft release notes for 1.6.0.2
stash: refresh the index before deciding if the work tree is dirty
Mention the fact that 'git annotate' is only for backward compatibility.
"blame -c" should be compatible with "annotate"
git-gui: Fix diff parsing for lines starting with "--" or "++"
git-gui: Fix string escaping in po2msg.sh
git gui: show diffs with a minimum of 1 context line
git-gui: update all remaining translations to French.
git-gui: Update french translation
Merge branch 'maint' of git://repo.or.cz/git-gui into maint
* 'maint' of git://repo.or.cz/git-gui:
git-gui: Fix diff parsing for lines starting with "--" or "++"
git-gui: Fix string escaping in po2msg.sh
git gui: show diffs with a minimum of 1 context line
git-gui: update all remaining translations to French.
git-gui: Update french translation
Tries to shorten the refname to a non-ambiguous name.
Szeder Gábor noticed that the git bash completion takes a
tremendous amount of time to strip leading components from
heads and tags refs (i.e. refs/heads, refs/tags, ...). He
proposed a new atom called 'refbasename' which removes at
most two leading components from the ref name.
I myself, proposed a more dynamic solution, which strips off
common leading components with the matched pattern.
But the current bash solution and both proposals suffer from
one mayor problem: ambiguous refs.
A ref is ambiguous, if it resolves to more than one full refs.
I.e. given the refs refs/heads/xyzzy and refs/tags/xyzzy. The
(short) ref xyzzy can point to both refs.
( Note: Its irrelevant whether the referenced objects are the
same or not. )
This proposal solves this by checking for ambiguity of the
shorten ref name.
The shortening is done with the same rules for resolving refs
but in the reverse order. The short name is checked if it
resolves to a different ref.
To continue the above example, the output would be like this:
heads/xyzzy
xyzzy
So, if you want just tags, xyzzy is not ambiguous, because it
will resolve to a tag. If you need the heads you get a also
a non-ambiguous short form of the ref.
To integrate this new format into the bash completion to get
only non-ambiguous refs is beyond the scope of this patch.
Signed-off-by: Bert Wesarg <bert.wesarg@googlemail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous tests all expected the results from SVN and Git to be
identical, and expected both to return success. This cannot be
guaranteed: SVN changed the message style between 1.4 and 1.5, and
in 1.5, sets a failure exit code.
Change the tests to verify that 'git svn info <item>' sets a failure
exit code, and that its output contains the file name. This should
hopefully catch all other errors.
Signed-off-by: Thomas Rast <trast@student.ethz.ch> Acked-by: Eric Wong <normalperson@yhbt.net>
git-svn: match SVN 1.5 behaviour of info' on unknown item
Previously 'git svn info unknown-file' only announced its failure (in
the SVN 1.4 style, "not a versioned resource"), and exited
successfully.
It is desirable to actually exit with failure, so change the code to
exit(1) under this condition. Since that is already halfway SVN 1.5
compatibility, also change the error output to match 1.5.
Signed-off-by: Thomas Rast <trast@student.ethz.ch> Acked-by: Eric Wong <normalperson@yhbt.net>
Changes 'git svn info' to always URL-escape the 'URL' and 'Repository'
fields and --url output, like SVN (at least 1.5) does.
Note that reusing the escape_url() further down in Git::SVN::Ra is not
possible because it only triggers for http(s) URLs. I did not know
whether extending it to all schemes would break SVN access anywhere,
so I made a new one that quotes in all schemes.
Signed-off-by: Thomas Rast <trast@student.ethz.ch> Acked-by: Eric Wong <normalperson@yhbt.net>
git svn info: make info relative to the current directory
Previously 'git svn info <path>' would always treat the <path> as
relative to the working directory root, with a default of ".". This
does not match the behaviour of 'svn info'. Prepend $(git rev-parse
--show-prefix) to the path used inside cmd_info to make it relative to
the current working directory.
Signed-off-by: Thomas Rast <trast@student.ethz.ch> Acked-by: Eric Wong <normalperson@yhbt.net>
git svn info: tests: fix ptouch argument order in setup
The arguments must be <gitwc-path> <svnwc-path>, otherwise it fails to
update the timestamps (without setting a failure exit code) and
results in bad test output later on.
Signed-off-by: Thomas Rast <trast@student.ethz.ch> Acked-by: Eric Wong <normalperson@yhbt.net>
git svn info: tests: use test_cmp instead of git-diff
git-diff does not appear to return the correct exit values, and gives
a false success for more than half (!) of the tests due to the space
in "trash directory" which git-svn fails to encode.
Signed-off-by: Thomas Rast <trast@student.ethz.ch> Acked-by: Eric Wong <normalperson@yhbt.net>
Exiting in the middle of a test confuses the test suite, which will
just say "FATAL: Unexpected exit with code 1" in response to a failed
test, instead of actually diagnosing failure and continuing with the
next test.
Signed-off-by: Thomas Rast <trast@student.ethz.ch> Acked-by: Eric Wong <normalperson@yhbt.net>
git svn: catch lack of upstream info for dcommit earlier
Since 711521e 'git svn dcommit' attempts to use the upstream
information to determine the SVN URL, before it verifies that it even
found an upstream. Move up the corresponding check.
Signed-off-by: Thomas Rast <trast@student.ethz.ch> Acked-by: Eric Wong <normalperson@yhbt.net>
Not checking the error code of a function used to transform and
send data makes me nervous. It currently returns "undef" on
success; so die if we get any result other than "undef" because
it's likely something went wrong somewhere. I really wish this
function returned an MD5 like send_stream (or better yet, SHA1)
for verification.
Mention the fact that 'git annotate' is only for backward compatibility.
When somebody is reading git-blame.txt (or git-annotate.txt) for the first
time, the message we would like to send is:
(1) Here is why you would want to use this command, what it can do
(perhaps more than what you would have expected from "$scm blame"),
and how you tell it to do what it does.
This is obvious.
(2) You might have heard of the command with the other name. There is no
difference between the two, except they differ in their default
output formats.
This is essential to answer: "git has both? how are they different?"
(3) We tend to encourage blame over annotate for new scripts and new
people, but there is no reason to choose one over the other.
This is not as important as (2), but would be useful to avoid
repeated questions about "when will we start deprecating this?"
As long as we describe (2) on git-annotate page clearly enough, people who
read git-blame page first and get curious can refer to git-annotate page.
While at it, subtly hint (3) without being overly explicit.
There is no reason to have a separate variable cmd_is_annotate;
OUTPUT_ANNOTATE_COMPAT option is supposed to produce the compatibility
output, and we should produce the same output even when the command was
not invoked as "annotate" but as "blame -c".
* jc/maint-log-grep:
log --author/--committer: really match only with name part
diff --cumulative is a sub-option of --dirstat
bash completion: Hide more plumbing commands
log --author/--committer: really match only with name part
When we tried to find commits done by AUTHOR, the first implementation
tried to pattern match a line with "^author .*AUTHOR", which later was
enhanced to strip leading caret and look for "^author AUTHOR" when the
search pattern was anchored at the left end (i.e. --author="^AUTHOR").
This had a few problems:
* When looking for fixed strings (e.g. "git log -F --author=x --grep=y"),
the regexp internally used "^author .*x" would never match anything;
* To match at the end (e.g. "git log --author='google.com>$'"), the
generated regexp has to also match the trailing timestamp part the
commit header lines have. Also, in order to determine if the '$' at
the end means "match at the end of the line" or just a literal dollar
sign (probably backslash-quoted), we would need to parse the regexp
ourselves.
An earlier alternative tried to make sure that a line matches "^author "
(to limit by field name) and the user supplied pattern at the same time.
While it solved the -F problem by introducing a special override for
matching the "^author ", it did not solve the trailing timestamp nor tail
match problem. It also would have matched every commit if --author=author
was asked for, not because the author's email part had this string, but
because every commit header line that talks about the author begins with
that field name, regardleses of who wrote it.
Instead of piling more hacks on top of hacks, this rethinks the grep
machinery that is used to look for strings in the commit header, and makes
sure that (1) field name matches literally at the beginning of the line,
followed by a SP, and (2) the user supplied pattern is matched against the
remainder of the line, excluding the trailing timestamp data.
git-gui: Fix diff parsing for lines starting with "--" or "++"
Languages like Lua and SQL use "--" to mark a line as commented out.
If this appears at column 0 and is part of the pre-image we may see
"--- foo" in the diff, indicating that the line whose content is
"-- foo" has been removed from the new version.
git-gui was incorrectly parsing "--- foo" as the old file name
in the file header, causing it to generate a bad patch file when
the user tried to stage or unstage a hunk or the selected line.
We need to keep track of where we are in the parsing so that we do
not misread a deletion or addition record as part of the header.
Reported-by: Alexander Gladysh <agladysh@gmail.com> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
git-gui: Show special diffs for complex conflict cases.
Add special handling for displaying diffs of modified/deleted,
and symlink/mode conflicts. Currently the display is completely
unusable for deciding how to resolve the conflict.
New display modes:
1) Deleted/Modified conflict: e.g.
LOCAL: deleted
REMOTE:
[diff :1:$path :3:$path]
git-gui: Make F5 reselect a diff, if an untracked file is selected.
If an untracked file is selected, F5 and other manual rescan synonyms
would try to select a tracked file instead. Also, clicking on an icon
in the unstaged changes list skips over untracked files, unless the
file clicked is untracked itself.
The objective is to make it easier to ignore untracked files showing
up in the Unstaged Changes list, and ensure that no modifications
to tracked objects are left unstaged.
Signed-off-by: Alexander Gavrilov <angavrilov@gmail.com> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
git-gui: Reimplement and enhance auto-selection of diffs.
Generalize the next_diff system, and implement auto-reselection
for merge tool resolution and reshow_diff. Also add auto-selection
of diffs after rescan, if no diff is already selected.
New auto-select rules:
- Rescan auto-selects the first conflicting file, or if none
a modified tracked file, if nothing was selected previously.
- Resolving a conflict auto-selects the nearest conflicting
file, or nothing if everything is resolved.
- Staging the last remaining hunk auto-selects the nearest
modified staged file.
- Staging a file through its icon auto-selects the nearest file.
Signed-off-by: Alexander Gavrilov <angavrilov@gmail.com> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>