* js/check-docs-exe:
check-docs: fix for setups where executables have an extension
check-docs: do not expect guide pages to correspond to commands
check-docs: really look at the documented commands again
docs: do not document the `git remote-testgit` command
docs: move gitremote-helpers into section 7
* ps/stash-in-c: (28 commits)
tests: add a special setup where stash.useBuiltin is off
stash: optionally use the scripted version again
stash: add back the original, scripted `git stash`
stash: convert `stash--helper.c` into `stash.c`
stash: replace all `write-tree` child processes with API calls
stash: optimize `get_untracked_files()` and `check_changes()`
stash: convert save to builtin
stash: make push -q quiet
stash: convert push to builtin
stash: convert create to builtin
stash: convert store to builtin
stash: convert show to builtin
stash: convert list to builtin
stash: convert pop to builtin
stash: convert branch to builtin
stash: convert drop and clear to builtin
stash: convert apply to builtin
stash: mention options in `show` synopsis
stash: add tests for `git stash show` config
stash: rename test cases to be more descriptive
...
dumb-http walker has been updated to share more error recovery
strategy with the normal codepath.
* jk/http-walker-status-fix:
http: use normalize_curl_result() instead of manual conversion
http: normalize curl results for dumb loose and alternates fetches
http: factor out curl result code normalization
"git multi-pack-index verify" did not scale well with the number of
packfiles, which is being improved.
* jh/midx-verify-too-many-packs:
midx: during verify group objects by packfile to speed verification
midx: add progress indicators in multi-pack-index verify
trace2:data: add trace2 data to midx
progress: add sparse mode to force 100% complete message
The completion helper code now pays attention to repository-local
configuration (when available), which allows --list-cmds to honour
a repository specific setting of completion.commands, for example.
* tz/completion:
completion: use __git when calling --list-cmds
completion: fix multiple command removals
t9902: test multiple removals via completion.commands
git: read local config in --list-cmds
Dev support update to make it easier to compare two formatted
results from our documentation.
* ma/doc-diff-doc-vs-doctor-comparison:
doc-diff: add `--cut-header-footer`
doc-diff: support diffing from/to AsciiDoc(tor)
doc-diff: let `render_tree()` take an explicit directory name
Doc: auto-detect changed build flags
A corner-case object name ambiguity while the sequencer machinery
is working (e.g. "rebase -i -x") has been (half) fixed.
* js/get-short-oid-drop-cache:
get_oid(): when an object was not found, try harder
sequencer: move stale comment into correct location
sequencer: improve error message when an OID could not be parsed
rebase -i: demonstrate obscure loose object cache bug
* ma/asciidoctor-fixes-more:
Documentation: turn middle-of-line tabs into spaces
git-svn.txt: drop escaping '\' that ends up being rendered
git.txt: remove empty line before list continuation
config/fsck.txt: avoid starting line with dash
config/diff.txt: drop spurious backtick
Help developers by making it easier to run most of the tests under
different versions of over-the-wire protocols.
* jt/test-protocol-version:
t5552: compensate for v2 filtering ref adv.
tests: fix protocol version for overspecifications
t5700: only run with protocol version 1
t5512: compensate for v0 only sending HEAD symrefs
t5503: fix overspecification of trace expectation
tests: always test fetch of unreachable with v0
t5601: check ssh command only with protocol v0
tests: define GIT_TEST_PROTOCOL_VERSION
"git worktree add" used to do a "find an available name with stat
and then mkdir", which is race-prone. This has been fixed by using
mkdir and reacting to EEXIST in a loop.
* ra/t3600-test-path-funcs:
t3600: use helpers to replace test -d/f/e/s <path>
t3600: modernize style
test functions: add function `test_file_not_empty`
"git rebase" uses the refs/rewritten/ hierarchy to store its
intermediate states, which inherently makes the hierarchy per
worktree, but it didn't quite work well.
* nd/rewritten-ref-is-per-worktree:
Make sure refs/rewritten/ is per-worktree
files-backend.c: reduce duplication in add_per_worktree_entries_to_dir()
files-backend.c: factor out per-worktree code in loose_fill_ref_dir()
When the "clean" filter can reduce the size of a huge file in the
working tree down to a small "token" (a la Git LFS), there is no
point in allocating a huge scratch area upfront, but the buffer is
sized based on the original file size. The convert mechanism now
allocates very minimum and reallocates as it receives the output
from the clean filter process.
* jh/resize-convert-scratch-buffer:
convert: avoid malloc of original file size
ci: fix AsciiDoc/Asciidoctor stderr check in the documentation build job
In 'ci/test-documentation.sh' we save the standard error of 'make
doc', and, in an attempt to make sure that neither AsciiDoc nor
Asciidoctor printed any warnings, we check the emptiness of the
resulting file with '! test -s stderr.log'. This check has never
actually worked, because in our 'ci/*' build scripts we rely on 'set
-e' aborting the build job when a command exits with error, and,
unfortunately, the combination of the two doesn't work as intended.
According to POSIX [1]:
"The -e setting shall be ignored when executing [...] a pipeline
beginning with the ! reserved word" [2]
Watch and learn:
$ echo unexpected >file
$ ( set -e; ! test -s file ; echo "should not reach this" ) ; echo $?
should not reach this
0
This is why we haven't noticed the warnings from Asciidoctor that were
fixed in the first patches of this patch series, though some of them
were already there in the build of v2.18.0-rc0 [3].
Check the emptiness of that file with 'test ! -s' instead, which works
properly with 'set -e':
$ ( set -e; test ! -s file ; echo "should not reach this" ) ; echo $?
1
Furthermore, dump the contents of that file to the log for our
convenience, so if it were to unexpectedly end up being non-empty,
then we wouldn't have to scroll through all that long build log
looking for warnings, but could see them right away near the end of
the log.
Note that we are only really interested in the standard error of
AsciiDoc and Asciidoctor, but by saving the stderr of 'make doc' we
also save any error output from the make rules. Currently there is
only one such line: we build the docs with Asciidoctor right after a
'make clean', meaning that 'make USE_ASCIIDOCTOR=1 doc' always starts
with running 'GIT-VERSION-GEN', which in turn prints the version to
stderr. A 'sed' command was supposed to remove this version line to
prevent it from triggering that (previously defunct) emptiness check,
but, unfortunately, this command doesn't work as intended, either,
because it leaves the file to be checked intact, but that defunct
emptiness check hid this issue, too... Furthermore, in the near
future there will be an other line on stderr, because commit 9a71722b4d (Doc: auto-detect changed build flags, 2019-03-17) in the
currently cooking branch 'ma/doc-diff-doc-vs-doctor-comparison' will
print "* new asciidoc flags" at the beginning of both 'make doc'
invokations.
Extend that 'sed' command to remove this line, too, wrap it in a
helper function so the output of both 'make doc' is filtered the same
way, and change its invokation to actually write the logfile to be
checked.
[2] POSIX doesn't discuss the meaning of '! cmd' in case of simple
commands, but it defines that "A pipeline is a sequence of one or
more commands separated by the control operator '|'", so
apparently a simple command is considered as pipeline as well.
The recent release of Asciidoctor v2.0.0 broke our documentation
build job on Travis CI, where we 'gem install asciidoctor', which
always brings us the latest and (supposedly) greatest. Alas, we are
not ready for that just yet, because it removed support for DocBook
4.5, and we have been requiring that particular DocBook version to
build 'user-manual.xml' with Asciidoctor, resulting in:
ASCIIDOC user-manual.xml
asciidoctor: FAILED: missing converter for backend 'docbook45'. Processing aborted.
Use --trace for backtrace
make[1]: *** [user-manual.xml] Error 1
Unfortunately, we can't simply switch to DocBook 5 right away, as
doing so leads to validation errors from 'xmlto', and working around
those leads to yet another errors... [1]
So let's stick with Asciidoctor v1.5.8 (latest stable release before
v2.0.0) in our documentation build job on Travis CI for now, until we
figure out how to deal with the fallout from Asciidoctor v2.0.0.
Documentation/git-status: fix titles in porcelain v2 section
Asciidoc uses either one-line or two-line syntax for document/section
titles[1]. The two-line form is used in git-status. Fix a few section
titles in the porcelain v2 section which were inadvertently using
markdown syntax.
[1] http://asciidoc.org/userguide.html#X17
Signed-off-by: Todd Zullinger <tmz@pobox.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Documentation/rev-list-options: wrap --date=<format> block with "--"
Using "+" to continue multiple list items is more tedious and
error-prone than wrapping the entire block with "--" block markers.
When using asciidoctor, the list items after the --date=iso list items
are incorrectly formatted when using "+" continuation. Use "--" block
markers to correctly format the block.
When using asciidoc there is no change in how the content is rendered.
Signed-off-by: Todd Zullinger <tmz@pobox.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
interpret-trailers.txt: start the desc line with a capital letter
This description line is shown in 'git help -a' and all other commands
description starts with an uppercase character. This just makes that
printout a bit nicer.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
ci: install Asciidoctor in 'ci/install-dependencies.sh'
When our '.travis.yml' was split into several 'ci/*' scripts [1], the
installation of the 'asciidoctor' gem somehow ended up in
'ci/test-documentation.sh'.
Install it in 'ci/install-dependencies.sh', where we install other
dependencies of the Documentation build job as well (asciidoc,
xmlto).
[1] 657343a602 (travis-ci: move Travis CI code into dedicated scripts,
2017-09-10)
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Asciidoctor versions v1.5.7 or later print the following warning while
building the documentation:
ASCIIDOC technical/protocol-v2.html
asciidoctor: WARNING: protocol-v2.txt: line 38: unterminated listing block
This highlights an issue (even with older Asciidoctor versions) where
the 'Initial Client Request' header is not rendered as a header but in
monospace. I'm not sure what exactly causes this issue and why it's
an issue only with this particular header, but all headers in
'protocol-v2.txt' are written like this:
Initial Client Request
------------------------
i.e. the header itself is indented by a space, and the "underline" is
two characters longer than the header.
Dropping that indentation and making the length of the underline match
the length of the header apparently fixes this issue.
While at it, adjust all other headers 'protocol-v2.txt' as well, to
match the style we use everywhere else.
The page rendered with AsciiDoc doesn't have this formatting issue.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Asciidoctor versions v1.5.7 or later print the following warning while
building the documentation:
ASCIIDOC technical/api-config.html
asciidoctor: WARNING: api-config.txt: line 232: unterminated listing block
This highlight an issue (even with older Asciidoctor versions) where
the length of the '----' lines surrounding a code example don't match,
and the rest of the document is rendered in monospace.
Fix this by making sure that the length of those lines match.
The page rendered with AsciiDoc doesn't have this formatting issue.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Asciidoctor versions v1.5.7 or later print the following warning while
building the documentation:
ASCIIDOC git-diff-tree.xml
asciidoctor: WARNING: diff-format.txt: line 2: unterminated listing block
This highlights an issue (even with older Asciidoctor versions) where
the "Raw output format" header is not rendered as a header, and the
rest of the document is rendered in monospace. This is not caused by
'diff-format.txt' in itself, but rather by 'git-diff-tree.txt'
including 'pretty-formats.txt' and 'diff-format.txt' on subsequent
lines, while the former happens to end with monospace-formatted
example commands.
Fix this by inserting an empty line between the two include::
directives.
The page rendered with AsciiDoc doesn't have this formatting issue.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
config: correct '**' matching in includeIf patterns
The current wildmatch() call for includeIf's gitdir pattern does not
pass the WM_PATHNAME flag. Without this flag, '*' is treated _almost_
the same as '**' (because '*' also matches slashes) with one exception:
'/**/' can match a single slash. The pattern 'foo/**/bar' matches
'foo/bar'.
But '/*/', which is essentially what wildmatch engine sees without
WM_PATHNAME, has to match two slashes (and '*' matches nothing). Which
means 'foo/*/bar' cannot match 'foo/bar'. It can only match 'foo//bar'.
The result of this is the current wildmatch() call works most of the
time until the user depends on '/**/' matching no path component. And
also '*' matches slashes while it should not, but people probably
haven't noticed this yet. The fix is straightforward.
Reported-by: Jason Karns <jason.karns@gmail.com> Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
check-docs: do not expect guide pages to correspond to commands
When we want to see what commands are listed in `command-list.txt` but
not installed, we currently include lines that refer to guides, e.g.
`gitattributes` or `gitcli`.
Let's not include those lines, as they are not referring to commands.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
check-docs: really look at the documented commands again
As part of the `check-docs` target, we verify that commands that are
documented are actually in the current list of commands to be built.
However, this logic broke in 5fafce0b78 (check-docs: get documented
command list from Makefile, 2012-08-08), when we tried to make the logic
safer by not looking at the files in the worktree, but at the list of
files to be generated in `Documentation/Makefile`. While this was the
right thing to do, it failed to accommodate for the fact that `make -C
Documentation/ print-man1`, unlike `ls Documentation/*.txt`, would *not*
print lines starting with the prefix `Documentation/`.
At long last, let's fix this.
Note: This went undetected due to a funny side effect of the
`ALL_PROGRAMS` variable starting with a space. That space, together with
the extra space we inserted before `$(ALL_PROGRAMS)` in the
case " $(ALL_PROGRAMS)" in
*" $$cmd ")
[...]
construct, is responsible that this case arm is used when `cmd` is empty
(which was clearly not intended to be the case).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is a remnant from early versions of the commit-graph patch series
[1], when 'git commit-graph --write' printed the hash of the created
commit-graph file, and tests did look at the command's output, because
the commit-graph file's name included that hash as well.
When using protocol v0, upload-pack over HTTP permits a "half-auth"
configuration in which, at the web server layer, the info/refs path is
not protected by authentication but the git-upload-pack path is, so that
a user can perform fetches that do not download any objects without
authentication, but still needs authentication to download objects.
But protocol v2 does not support this, because both ref and pack are
obtained from the git-upload-pack path.
Mark the test verifying this behavior as protocol v0-only, with a
description of what needs to be done to make v2 support this.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com> Acked-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
http: use normalize_curl_result() instead of manual conversion
When we switched off CURLOPT_FAILONERROR in 17966c0a63 (http: avoid
disconnecting on 404s for loose objects, 2016-07-11), the fetch_object()
function started manually handling 404's. Since we now have
normalize_curl_result() for use elsewhere, we can use it here as well,
shortening the code.
Note that we lose the check for http/https in the URL here. None of the
other result-normalizing code paths bother with this. Looking at
missing_target(), which checks specifically for an FTP-specific CURLcode
and "http" code 550, it seems likely that git-over-ftp has been subtly
broken since 17966c0a63. This patch does nothing to fix that, but nor
should it make anything worse (in fact, it may be slightly better
because we'll actually recognize an error as such, rather than assuming
CURLE_OK means we actually got some data).
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
http: normalize curl results for dumb loose and alternates fetches
If the dumb-http walker encounters a 404 when fetching a loose object,
it then looks at any http-alternates for the object. The 404 check is
implemented by missing_target(), which checks not only the http code,
but also that we got an http error from the CURLcode.
That broke when we stopped using CURLOPT_FAILONERROR in 17966c0a63
(http: avoid disconnecting on 404s for loose objects, 2016-07-11), since
our CURLcode will now be CURLE_OK. As a result, fetching over dumb-http
from a repository with alternates could result in Git printing "Unable
to find abcd1234..." and aborting.
We could probably fix this just by loosening missing_target(). However,
there's other code which looks at the curl result, and it would have to
be tweaked as well. Instead, let's just normalize the result the same
way the smart-http code does.
There's a similar case in processing the alternates (where we failover
from "info/http-alternates" to "info/alternates"). We'll give it the
same treatment.
After this patch, we should be hitting all code paths that need this
normalization (notably absent here is the http_pack_request path, but it
does not use FAILONERROR, nor missing_target()).
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
We make some requests with CURLOPT_FAILONERROR and some without, and
then handle_curl_result() normalizes any failures to a uniform CURLcode.
There are some other code paths in the dumb-http walker which don't use
handle_curl_result(); let's pull the normalization into its own function
so it can be reused.
Arguably those code paths would benefit from the rest of
handle_curl_result(), notably the auth handling. But retro-fitting it
now would be a lot of work, and in practice it doesn't matter too much
(whatever authentication we needed to make the initial contact with the
server is generally sufficient for the rest of the dumb-http requests).
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
refs/files-backend: don't look at an aborted transaction
When deleting refs, we hold packed-refs.lock and prepare a packed
transaction to drop the refs from the packed-refs file. If it turns out
that we don't need to rewrite the packed refs (e.g., because none of the
deletions were present in the file), then we abort the transaction.
If that abort succeeds, then the transaction struct will have been
freed, and we set our local pointer to NULL so we don't look at it
again.
However, if it fails, then the struct will _still_ have been freed
(because ref_transaction_abort() always frees). But we don't clean up
the pointer, and will jump to our cleanup code, which will try to abort
it again, causing a use-after-free.
It's actually impossible for this to trigger in practice, since
packed_transaction_abort() will never return anything but success. But
let's fix it anyway, since that's more than we should assume about the
packed-refs code (after all, we are already bothering to check for an
error result which cannot be triggered).
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
In files_transaction_prepare(), if we have to delete some refs, we use a
subordinate packed_transaction to do so. It's rare for that
sub-transaction's prepare step to fail, since we hold the packed-refs
lock. But if it does, we trigger a BUG() due to these steps:
- we've attached the packed transaction to the files transaction as
backend_data->packed_transaction
- when the prepare step fails, the packed transaction cleans itself
up, putting itself into the CLOSED state
- the error value from preparing the packed transaction lets us know
in files_transaction_prepare() that we should also clean up and
return an error. We call files_transaction_cleanup(), which tries to
abort backend_data->packed_transaction. Since it's already CLOSED,
that triggers an assertion in ref_transaction_abort().
We can fix that by disconnecting the packed transaction from the outer
files transaction, and then free-ing (not aborting!) it ourselves.
A few other options/alternatives I considered:
- we could just make it a noop to abort a CLOSED transaction. But that
seems less safe, since clearly this code expects (and enforces) a
particular set of state transitions.
- we could have files_transaction_cleanup() selectively call abort()
vs free() based on the state of the on the packed transaction.
That's basically a more restricted version of the above, but also
potentially unsafe.
- instead of disconnecting backend_data->packed_transaction on error,
we could wait to install it until we successfully prepare. That
might make the flow a little simpler, but it introduces a hassle.
Earlier parts of files_transaction_prepare() that encounter an error
will jump to the cleanup label, and expect that cleaning up the
outer transaction will clean up the packed transaction, too. We'd
have to adjust those sites to clean up the packed transaction.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
midx: during verify group objects by packfile to speed verification
Teach `multi-pack-index verify` to sort the set of object by
packfile so that only one packfile needs to be open at a time.
This is a performance improvement. Previously, objects were
verified in OID order. This essentially requires all packfiles
to be open at the same time. If the number of packfiles exceeds
the open file limit, packfiles would be LRU-closed and re-opened
many times.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
progress: add sparse mode to force 100% complete message
Add new start_sparse_progress() and start_delayed_sparse_progress()
constructors and "sparse" flag to struct progress.
Teach stop_progress() to force a 100% complete progress message before
printing the final "done" message when "sparse" is set.
Calling display_progress() for every item in a large set can
be expensive. If callers try to filter this for performance
reasons, such as emitting every k-th item, progress would
not reach 100% unless they made a final call to display_progress()
with the item count before calling stop_progress().
Now this is automatic when "sparse" is set.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
checkout.txt: note about losing staged changes with --merge
If you have staged changes in path A and perform 'checkout
--merge' (which could result in conflicts in a totally unrelated path
B), changes in A will be gone. Which is unexpected. We are supposed
to keep all changes, or kick and scream otherwise.
This is the result of how --merge is implemented, from the very first
day in 1be0659efc (checkout: merge local modifications while switching
branches., 2006-01-12):
1. a merge is done, unmerged entries are collected
2. a hard switch to a new branch is done, then unmerged entries added
back
There is no trivial fix for this. Going with 3-way merge one file at a
time loses rename detection. Going with 3-way merge by trees requires
teaching the algorithm to pick up staged changes. And even if we detect
staged changes with --merge and abort for safety, an option to continue
--merge is very weird. Such an option would keep worktree changes, but
drop staged changes.
Because the problem has been with us since the introduction of --merge
and everybody has been pretty happy (except Phillip, who found this
problem), I'll just take a note here to acknowledge it and wait for
merge wizards to come in and work their magic. There may be a way
forward [1].
unpack-trees: fix oneway_merge accidentally carry over stage index
Phillip found out that 'git checkout -f <branch>' does not restore
conflict/unmerged files correctly. All tracked files should be taken
from <branch> and all non-zero stages removed. Most of this is true,
except that the final file could be in stage one instead of zero.
"checkout -f" (among other commands) does this with one-way merge, which
is supposed to take stat info from the index and everything else from
the given tree. The add_entry(.., old, ...) call in oneway_merge()
though will keep stage index from the index.
This is normally not a problem if the entry from the index is
normal (stage #0). But if there is a conflict, stage #0 does not exist
and we'll get stage #1 entry as "old" variable, which gets recorded in
the final index. Fix it by clearing stage mask.
This bug probably comes from b5b425074e (git-read-tree: make one-way
merge also honor the "update" flag, 2005-06-07). Before this commit, we
may create the final ("dst") index entry from the one in index, but we
do clear CE_STAGEMASK.
I briefly checked two- and three-way merge functions. I think we don't
have the same problem in those.
Reported-by: Phillip Wood <phillip.wood@dunelm.org.uk> Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
As we made --list-cmds read the local configuration file in an
earlier step, the completion.commands variable respects repo-level
configuration. Use __git which ensures that the proper repo config
is consulted if the command line contains 'git -C /some/other/repo'.
Suggested-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Todd Zullinger <tmz@pobox.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 6532f3740b ("completion: allow to customize the completable
command list", 2018-05-20) tried to allow multiple space-separated
entries in completion.commands. To do this, it copies each parsed token
into a strbuf so that the result is NUL-terminated.
However, for tokens starting with "-", it accidentally passes the
original non-terminated string, meaning that only the final one worked.
Switch to using the strbuf.
Reported-by: Todd Zullinger <tmz@pobox.com> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t9902: test multiple removals via completion.commands
6532f3740b ("completion: allow to customize the completable command
list", 2018-05-20) added the completion.commands config variable.
Multiple commands may be added or removed, separated by a space.
Demonstrate the failure of multiple removals.
Signed-off-by: Todd Zullinger <tmz@pobox.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Normally code that is checking config before we've decided to do
setup_git_directory() would use read_early_config(), which uses
discover_git_directory() to tentatively see if we're in a repo,
and if so to add it to the config sequence.
But list_cmds() uses the caching configset mechanism which
rightly does not use read_early_config(), because it has no
idea if it's being called early.
Call setup_git_directory_gently() so we can pick up repo-level
config (like completion.commands).
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
stash: setup default diff output format if necessary
In the scripted 'git stash show' when no arguments are passed, we just
pass '--stat' to 'git diff'. When any argument is passed to 'stash
show', we no longer pass '--stat' to 'git diff', and pass whatever
flags are passed directly through to 'git diff'.
By default 'git diff' shows the patch output. So when a user uses
'git stash show --patience', they would be shown the diff as expected,
using the patience algorithm. '--patience' in this case only changes
the diff algorithm, but does not cause 'git diff' to show the diff by
itself. The diff is shown because that's the default behaviour of
'git diff'.
In the C version of 'git stash show', we try to emulate that behaviour
using the internal diff API. However we forgot to set up the default
output format, in case it wasn't set by any of the flags that were
passed through. So 'git stash show --patience' in the builtin version
of stash would be completely silent, while it would show the diff in
the scripted version.
The same thing would happen for other flags that only affect the way a
patch is displayed, rather than switching to a different output format
than the default one.
Fix this by setting up the default output format for 'git diff'.
Reported-by: Denton Liu <liu.denton@gmail.com> Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git config --type=color ..." is meant to replace "git config --get-color"
but there is a slight difference that wasn't documented, which is
now fixed.
* jk/config-type-color-ends-with-lf:
config: document --type=color output is a complete line
A recent update broke "is this object available to us?" check for
well-known objects like an empty tree (which should yield "yes",
even when there is no on-disk object for an empty tree), which has
been corrected.
* jk/virtual-objects-do-exist:
rev-list: allow cached objects in existence check
On platforms where "git fetch" is killed with SIGPIPE (e.g. OSX),
the upload-pack that runs on the other end that hangs up after
detecting an error could cause "git fetch" to die with a signal,
which led to a flakey test. "git fetch" now ignores SIGPIPE during
the network portion of its operation (this is not a problem as we
check the return status from our write(2)s).
"git fsck --connectivity-only" omits computation necessary to sift
the objects that are not reachable from any of the refs into
unreachable and dangling. This is now enabled when dangling
objects are requested (which is done by default, but can be
overridden with the "--no-dangling" option).
* jk/fsck-doc:
fsck: always compute USED flags for unreachable objects
doc/fsck: clarify --connectivity-only behavior
"git rebase" that was reimplemented in C did not set ORIG_HEAD
correctly, which has been corrected.
* js/rebase-orig-head-fix:
built-in rebase: set ORIG_HEAD just once, before the rebase
built-in rebase: demonstrate that ORIG_HEAD is not set correctly
built-in rebase: use the correct reflog when switching branches
built-in rebase: no need to check out `onto` twice
The final report from "git bisect" used to show the suspected
culprit using a raw "diff-tree", with which there is no output for
a merge commit. This has been updated to use a more modern and
human readable output that still is concise enough.
* jk/bisect-final-output:
bisect: make diff-tree output prettier
bisect: fix internal diff-tree config loading
bisect: use string arguments to feed internal diff-tree
CFLAGS now can be tweaked when invoking Make while using
DEVELOPER=YesPlease; this did not work well before.
* ab/makefile-help-devs-more:
Makefile: allow for combining DEVELOPER=1 and CFLAGS="..."
Makefile: move the setting of *FLAGS closer to "include"
Makefile: Move *_LIBS assignment into its own section
Makefile: add/remove comments at top and tweak whitespace
Makefile: move "strip" assignment down from flags
Makefile: remove an out-of-date comment
Some compilers don't allow NULL to be passed for a va_list,
and e.g. "gcc (Raspbian 6.3.0-18+rpi1+deb9u1) 6.3.0 20170516"
errors out like this:
trace2/tr2_tgt_event.c:193:18:
error: invalid operands to binary &&
(have ‘int’ and ‘va_list {aka __va_list}’)
if (fmt && *fmt && ap) {
^^
I couldn't find any hints that va_list and pointers can be mixed,
and no hints that they can't either. Morten Welinder comments:
"C99, Section 7.15, simply says that va_list "is an object type suitable for
holding information needed by the macros va_start, va_end, and
va_copy". So clearly not guaranteed to be mixable with pointers...
The portable solution is to use "va_list" everywhere in the callchain.
As a consequence, both trace2_region_enter_fl() and trace2_region_leave_fl()
now take a variable argument list.
Signed-off-by: Torsten Bögershausen <tboegi@web.de> Acked-by: Jeff Hostetler <jeffhost@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the rebase.useBuiltin setting, which was added as an escape
hatch to disable the builtin version of rebase first released with Git
2.20.
See [1] for the initial implementation of rebase.useBuiltin, and [2]
and [3] for the documentation and corresponding
GIT_TEST_REBASE_USE_BUILTIN option.
Carrying the legacy version is a maintenance burden as seen in 7e097e27d3 ("legacy-rebase: backport -C<n> and --whitespace=<option>
checks", 2018-11-20) and 9aea5e9286 ("rebase: fix regression in
rebase.useBuiltin=false test mode", 2019-02-13). Since the built-in
version has been shown to be stable enough let's remove the legacy
version.
As noted in [3] having use_builtin_rebase() shell out to get its
config doesn't make any sense anymore, that was done for the purposes
of spawning the legacy rebase without having modified any global
state. Let's instead handle this case in rebase_config().
There's still a bunch of references to git-legacy-rebase in po/*.po,
but those will be dealt with in time by the i18n effort.
Even though this configuration variable only existed two releases
let's not entirely delete the entry from the docs, but note its
absence. Individual versions of git tend to be around for a while due
to distro packaging timelines, so e.g. if we're "lucky" a given
version like 2.21 might be installed on say OSX for half a decade.
That'll mean some people probably setting this in config, and then
when they later wonder if it's needed they can Google search the
config option name or check it in git-config. It also allows us to
refer to the docs from the warning for details.
1. 55071ea248 ("rebase: start implementing it as a builtin",
2018-08-07)
2. d8d0a546f0 ("rebase doc: document rebase.useBuiltin", 2018-11-14)
3. 62c23938fa ("tests: add a special setup where rebase.useBuiltin is
off", 2018-11-14)
3. https://public-inbox.org/git/nycvar.QRO.7.76.6.1903141544110.41@tvgsbejvaqbjf.bet/
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>