Allow an asterisk as a substring (as opposed to the entirety) of
a path component for both side of a refspec, e.g.
"refs/heads/o*:refs/remotes/heads/i*".
An attempt to delete a ref by pushing into a repositorywhose HEAD
symbolic reference points at an unborn branch that cannot be
created due to ref D/F conflict (e.g. refs/heads/a/b exists, HEAD
points at refs/heads/a) failed.
* jx/do-not-crash-receive-pack-wo-head:
receive-pack: crash when checking with non-exist HEAD
In preparation for allowing different "backends" to store the refs
in a way different from the traditional "one ref per file in $GIT_DIR
or in a $GIT_DIR/packed-refs file" filesystem storage, reduce
direct filesystem access to ref-like things like CHERRY_PICK_HEAD
from scripts and programs.
* dt/refs-backend-preamble:
git-stash: use update-ref --create-reflog instead of creating files
update-ref and tag: add --create-reflog arg
refs: add REF_FORCE_CREATE_REFLOG flag
git-reflog: add exists command
refs: new public ref function: safe_create_reflog
refs: break out check for reflog autocreation
refs.c: add err arguments to reflog functions
Teach "git log" and friends a new "--date=format:..." option to
format timestamps using system's strftime(3).
* jk/date-mode-format:
strbuf: make strbuf_addftime more robust
introduce "format" date-mode
convert "enum date_mode" into a struct
show-branch: use DATE_RELATIVE instead of magic number
* pt/am-tests:
t3901: test git-am encoding conversion
t3418: non-interactive rebase --continue with rerere enabled
t4150: tests for am --[no-]scissors
t4150: am with post-applypatch hook
t4150: am with pre-applypatch hook
t4150: am with applypatch-msg hook
t4150: am --resolved fails if index has unmerged entries
t4150: am --resolved fails if index has no changes
t4150: am refuses patches when paused
t4151: am --abort will keep dirty index intact
t4150: am fails if index is dirty
t4150: am.messageid really adds the message id
Optimize computation of untracked status indicator by bash prompt
script (in contrib/).
* sg/bash-prompt-untracked-optim:
bash prompt: faster untracked status indicator with untracked directories
bash prompt: test untracked files status indicator with untracked dirs
A "rebase" replays changes of the local branch on top of something
else, as such they are placed in stage #3 and referred to as
"theirs", while the changes in the new base, typically a foreign
work, are placed in stage #2 and referred to as "ours". Clarify
the "checkout --ours/--theirs".
* se/doc-checkout-ours-theirs:
checkout: document subtlety around --ours/--theirs
The "rev-parse --parseopt" mode parsed the option specification
and the argument hint in a strange way to allow '=' and other
special characters in the option name while forbidding them from
the argument hint. This made it impossible to define an option
like "--pair <key>=<value>" with "pair=key=value" specification,
which instead would have defined a "--pair=key <value>" option.
* ib/scripted-parse-opt-better-hint-string:
rev-parse --parseopt: allow [*=?!] in argument hints
Often a fast-import stream builds a new commit on top of the
previous commit it built, and it often unconditionally emits a
"from" command to specify the first parent, which can be omitted in
such a case. This caused fast-import to forget the tree of the
previous commit and then re-read it from scratch, which was
inefficient. Optimize for this common case.
* mh/fast-import-optimize-current-from:
fast-import: do less work when given "from" matches current branch head
Add "drop commit-object-name subject" command as another way to
skip replaying of a commit in "rebase -i", and then punish those
who do not use it (and instead just remove the lines) by throwing
a warning.
* gr/rebase-i-drop-warn:
git rebase -i: add static check for commands and SHA-1
git rebase -i: warn about removed commits
git-rebase -i: add command "drop" to remove a commit
Teach "git status" to show a more detailed information regarding
the "rebase -i" session in progress.
* gp/status-rebase-i-info:
status: add new tests for status during rebase -i
status: give more information during rebase -i
status: differentiate interactive from non-interactive rebases
status: factor two rebase-related messages together
"cat-file" learned "--batch-all-objects" option to enumerate all
available objects in the repository more quickly than "rev-list
--all --objects" (the output includes unreachable objects, though).
* jk/cat-file-batch-all:
cat-file: sort and de-dup output of --batch-all-objects
cat-file: add --batch-all-objects option
cat-file: split batch_one_object into two stages
cat-file: stop returning value from batch_one_object
cat-file: add --buffer option
cat-file: move batch_options definition to top of file
cat-file: minor style fix in options list
Allow ignoring fsck errors on specific set of known-to-be-bad
objects, and also tweaking warning level of various kinds of non
critical breakages reported.
* js/fsck-opt:
fsck: support ignoring objects in `git fsck` via fsck.skiplist
fsck: git receive-pack: support excluding objects from fsck'ing
fsck: introduce `git fsck --connectivity-only`
fsck: support demoting errors to warnings
fsck: document the new receive.fsck.<msg-id> options
fsck: allow upgrading fsck warnings to errors
fsck: optionally ignore specific fsck issues completely
fsck: disallow demoting grave fsck errors to warnings
fsck: add a simple test for receive.fsck.<msg-id>
fsck: make fsck_tag() warn-friendly
fsck: handle multiple authors in commits specially
fsck: make fsck_commit() warn-friendly
fsck: make fsck_ident() warn-friendly
fsck: report the ID of the error/warning
fsck (receive-pack): allow demoting errors to warnings
fsck: offer a function to demote fsck errors to warnings
fsck: provide a function to parse fsck message IDs
fsck: introduce identifiers for fsck messages
fsck: introduce fsck options
Clean up refs API and make "git clone" less intimate with the
implementation detail.
* mh/init-delete-refs-api:
delete_ref(): use the usual convention for old_sha1
cmd_update_ref(): make logic more straightforward
update_ref(): don't read old reference value before delete
check_branch_commit(): make first parameter const
refs.h: add some parameter names to function declarations
refs: move the remaining ref module declarations to refs.h
initial_ref_transaction_commit(): check for ref D/F conflicts
initial_ref_transaction_commit(): check for duplicate refs
refs: remove some functions from the module's public interface
initial_ref_transaction_commit(): function for initial ref creation
repack_without_refs(): make function private
prune_refs(): use delete_refs()
prune_remote(): use delete_refs()
delete_refs(): bail early if the packed-refs file cannot be rewritten
delete_refs(): make error message more generic
delete_refs(): new function for the refs API
delete_ref(): handle special case more explicitly
remove_branches(): remove temporary
delete_ref(): move declaration to refs.h
* pt/pull-builtin:
pull: remove redirection to git-pull.sh
pull --rebase: error on no merge candidate cases
pull --rebase: exit early when the working directory is dirty
pull: configure --rebase via branch.<name>.rebase or pull.rebase
pull: teach git pull about --rebase
pull: set reflog message
pull: implement pulling into an unborn branch
pull: fast-forward working tree if head is updated
pull: check if in unresolved merge state
pull: support pull.ff config
pull: error on no merge candidates
pull: pass git-fetch's options to git-fetch
pull: pass git-merge's options to git-merge
pull: pass verbosity, --progress flags to fetch and merge
pull: implement fetch + merge
pull: implement skeletal builtin pull
argv-array: implement argv_array_pushv()
parse-options-cb: implement parse_opt_passthru_argv()
parse-options-cb: implement parse_opt_passthru()
"git send-email" now performs alias-expansion on names that are
given via --cccmd, etc.
This round comes with a lot more enhanced e-mail address parser,
which makes it a bit scary, but as long as it works as designed, it
makes it wonderful ;-).
* rl/send-email-aliases:
send-email: suppress meaningless whitespaces in from field
send-email: allow multiple emails using --cc, --to and --bcc
send-email: consider quote as delimiter instead of character
send-email: reduce dependencies impact on parse_address_line
send-email: minor code refactoring
send-email: allow use of aliases in the From field of --compose mode
send-email: refactor address list process
t9001-send-email: refactor header variable fields replacement
send-email: allow aliases in patch header and command script outputs
t9001-send-email: move script creation in a setup test
Replace "is this subdirectory a separate repository that should not
be touched?" check "git clean" does by checking if it has .git/HEAD
using the submodule-related code with a more optimized check.
* ee/clean-remove-dirs:
read_gitfile_gently: fix use-after-free
clean: improve performance when removing lots of directories
p7300: add performance tests for clean
t7300: add tests to document behavior of clean and nested git
setup: sanity check file size in read_gitfile_gently
setup: add gentle version of read_gitfile
Move machinery to parse human-readable scaled numbers like 1k, 4M,
and 2G as an option parameter's value from pack-objects to
parse-options API, to make it available to other codepaths.
* cb/parse-magnitude:
parse-options: move unsigned long option parsing out of pack-objects.c
test-parse-options: update to handle negative ints
"git verify-tag" and "git verify-commit" have been taught to share
more code, and then learned to optionally show the verification
message from the underlying GPG implementation.
* bc/gpg-verify-raw:
verify-tag: add option to print raw gpg status information
verify-commit: add option to print raw gpg status information
gpg: centralize printing signature buffers
gpg: centralize signature check
verify-commit: add test for exit status on untrusted signature
verify-tag: share code with verify-commit
verify-tag: add tests
Various enhancements around "git am" reading patches generated by
foreign SCM.
* pt/am-foreign:
am: teach mercurial patch parser how to read from stdin
am: use gmtime() to parse mercurial patch date
t4150: test applying StGit series
am: teach StGit patch parser how to read from stdin
t4150: test applying StGit patch
GSoC project to rebuild ref listing by branch and tag based on the
for-each-ref machinery. This is its first part.
* kn/for-each-ref:
ref-filter: make 'ref_array_item' use a FLEX_ARRAY for refname
for-each-ref: introduce filter_refs()
ref-filter: move code from 'for-each-ref'
ref-filter: add 'ref-filter.h'
for-each-ref: rename variables called sort to sorting
for-each-ref: rename some functions and make them public
for-each-ref: introduce 'ref_array_clear()'
for-each-ref: introduce new structures for better organisation
for-each-ref: rename 'refinfo' to 'ref_array_item'
for-each-ref: clean up code
for-each-ref: extract helper functions out of grab_single_ref()
Introduce filter_refs() which will act as an API for filtering
a set of refs. Based on the type of refs the user has requested,
we iterate through those refs and apply filters as per the
given ref_filter structure and finally store the filtered refs
in the ref_array structure.
Currently this will wrap around ref_filter_handler(). Hence,
ref_filter_handler is made file scope static.
As users of this API will no longer send a ref_filter_cbdata
structure directly, we make the elements of ref_filter_cbdata
pointers. We can now use the information given by the users
to obtain our own ref_filter_cbdata structure. Changes are made to
support the change in ref_filter_cbdata structure.
Make 'for-each-ref' use this API.
Helped-by: Junio C Hamano <gitster@pobox.com> Mentored-by: Christian Couder <christian.couder@gmail.com> Mentored-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr> Signed-off-by: Karthik Nayak <karthik.188@gmail.com> Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move most of the code from 'for-each-ref' to 'ref-filter' to make
it publicly available to other commands, this is to unify the code
of 'tag -l', 'branch -l' and 'for-each-ref' so that they can share
their implementations with each other.
Add 'ref-filter' to the Makefile, this completes the movement of code
from 'for-each-ref' to 'ref-filter'.
Mentored-by: Christian Couder <christian.couder@gmail.com> Mentored-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr> Signed-off-by: Karthik Nayak <karthik.188@gmail.com> Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge branch 'jc/fsck-retire-require-eoh' into maint
A fix to a minor regression to "git fsck" in v2.2 era that started
complaining about a body-less tag object when it lacks a separator
empty line after its header to separate it with a non-existent body.
* jc/fsck-retire-require-eoh:
fsck: it is OK for a tag and a commit to lack the body
We used to ask libCURL to use the most secure authentication method
available when talking to an HTTP proxy only when we were told to
talk to one via configuration variables. We now ask libCURL to
always use the most secure authentication method, because the user
can tell libCURL to use an HTTP proxy via an environment variable
without using configuration variables.
* et/http-proxyauth:
http: always use any proxy auth method available
Merge branch 'jc/unexport-git-pager-in-use-in-pager' into maint
When you say "!<ENTER>" while running say "git log", you'd confuse
yourself in the resulting shell, that may look as if you took
control back to the original shell you spawned "git log" from but
that isn't what is happening. To that new shell, we leaked
GIT_PAGER_IN_USE environment variable that was meant as a local
communication between the original "Git" and subprocesses that was
spawned by it after we launched the pager, which caused many
"interesting" things to happen, e.g. "git diff | cat" still paints
its output in color by default.
Stop leaking that environment variable to the pager's half of the
fork; we only need it on "Git" side when we spawn the pager.
* jc/unexport-git-pager-in-use-in-pager:
pager: do not leak "GIT_PAGER_IN_USE" to the pager
Merge branch 'rh/test-color-avoid-terminfo-in-original-home' into maint
An ancient test framework enhancement to allow color was not
entirely correct; this makes it work even when tput needs to read
from the ~/.terminfo under the user's real HOME directory.
* rh/test-color-avoid-terminfo-in-original-home:
test-lib.sh: fix color support when tput needs ~/.terminfo
Revert "test-lib.sh: do tests for color support after changing HOME"
Loosen restrictions on refspecs by allowing patterns that have a "*"
within a component instead of only as the whole component.
Remove the logic to accept a single "*" as a whole component from
check_refname_format(), and implement an extended form of that logic
in check_refname_component(). Pass the pointer to the flags argument
to the latter, as it has to clear REFNAME_REFSPEC_PATTERN bit when
it sees "*".
Teach check_refname_component() function to allow an asterisk "*"
only when REFNAME_REFSPEC_PATTERN is set in the flags, and drop the
bit after seeing a "*", to ensure that one side of a refspec
contains at most one asterisk.
This will allow us to accept refspecs such as `for/bar*:foo/baz*`.
Any refspec which functioned before shall continue functioning with
the new logic.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Correctly specify all characters which are rejected under the '4: a
bad character' disposition, which did not list all characters that
are treated as such.
Cleanup comment style for rejected refs by inserting a ", or" at the
end of each statement.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
It used to be possible to apply a patch series with "git am mbox"
and then only after seeing a failure, switch to three-way mode via
"git am -3" (no other options or arguments). The commit being
reverted broke this workflow.
Add support for Fountain, a plain text screenplay format. Git
facilitates not just programming specifically, but creative writing
in general, so it makes sense to also support other plain text
documents besides source code.
In the structure of a screenplay specifically, scenes are roughly
analogous to functions, in the sense that it makes your job easier
if you can see which ones were changed in a given range of patches.
More information about the Fountain format can be found on its
official website, at http://fountain.io .
Signed-off-by: Zoë Blade <zoe@bytenoise.co.uk> Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is because if HEAD points to a conflict reference, the function
`resolve_refdup("HEAD", ...)` does not return a valid reference name,
but a null buffer. Later matching the delete reference against the null
buffer will cause git-receive-pack crash.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
When git-send-pack is exec'ed, as is done by git-remote-http, it
does not read the config, and configured value of user.signingkey is
ignored. Thus it was impossible to specify a signing key over HTTP,
other than the default key in the keyring having a User ID matching
the "Name <email>" format.
This patch at least partially fixes the problem by reading in the GPG
config from within send-pack. It does not address the related problem
of plumbing a value for this configuration option using
`git -c user.signingkey push ...`.
Signed-off-by: Dave Borowitz <dborowitz@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow the creation of a ref (e.g. stash) with a reflog already in
place. For most refs (e.g. those under refs/heads), this happens
automatically, but for others, we need this option.
Currently, git does this by pre-creating the reflog, but alternate ref
backends might store reflogs somewhere other than .git/logs. Code
that now directly manipulates .git/logs should instead use git
plumbing commands.
I also added --create-reflog to git tag, just for completeness.
In a moment, we will use this argument to make git stash work with
alternate ref backends.
Signed-off-by: David Turner <dturner@twopensource.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is necessary because alternate ref backends might store reflogs
somewhere other than .git/logs. Code that now directly manipulates
.git/logs should instead go through git-reflog.
Signed-off-by: David Turner <dturner@twopensource.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The safe_create_reflog function creates a reflog, if it does not
already exist.
The log_ref_setup function becomes private and gains a force_create
parameter to force the creation of a reflog even if log_all_ref_updates
is false or the refname is not one of the special refnames.
The new parameter also reduces the need to store, modify, and restore
the log_all_ref_updates global before reflog creation.
In a moment, we will use this to add reflog creation commands to
git-reflog.
Signed-off-by: David Turner <dturner@twopensource.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add an err argument to log_ref_setup that can explain the reason
for a failure. This then eliminates the need to manage errno through
this function since we can just add strerror(errno) to the err string
when meaningful. No callers relied on errno from this function for
anything else than the error message.
Also add err arguments to private functions write_ref_to_lockfile,
log_ref_write_1, commit_ref_update. This again eliminates the need to
manage errno in these functions.
Some error messages are slightly reordered.
Update of a patch by Ronnie Sahlberg.
Signed-off-by: Ronnie Sahlberg <sahlberg@google.com> Signed-off-by: David Turner <dturner@twopensource.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
unpack-trees: don't update files with CE_WT_REMOVE set
Don't update files in the worktree from cache entries which are
flagged with CE_WT_REMOVE.
When a user does a sparse checkout, git removes files that are
marked with CE_WT_REMOVE (because they are out-of-scope for the
sparse checkout). If those files are also marked CE_UPDATE (for
instance, because they differ in the branch that is being checked
out and the outgoing branch), git would previously recreate them.
This patch prevents them from being recreated.
These erroneously-created files would also interfere with merges,
causing pre-merge revisions of out-of-scope files to appear in the
worktree.
apply_sparse_checkout() is the function where all "action"
manipulation (add, delete, update files..) for sparse checkout
occurs; it should not ask to delete and update both at the same
time.
Signed-off-by: Anatole Shaw <git-devel@omni.poc.net> Signed-off-by: David Turner <dturner@twopensource.com> Helped-by: Duy Nguyen <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The return value of strftime is poorly designed; when it
returns 0, the caller cannot tell if the buffer was not
large enough, or if the output was actually 0 bytes. In the
original implementation of strbuf_addftime, we simply punted
and guessed that our 128-byte hint would be large enough.
We can do better, though, if we're willing to treat strftime
like less of a black box. We can munge the incoming format
to make sure that it never produces 0-length output, and
then "fix" the resulting output. That lets us reliably grow
the buffer based on strftime's return value.
Clever-idea-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
bash prompt: faster untracked status indicator with untracked directories
If the untracked status indicator is enabled, __git_ps1() looks for
untracked files by running 'git ls-files'. This can be perceptibly slow
in case of an untracked directory containing lot of files, because it
lists all files found in the untracked directory only to be redirected
into /dev/null right away (this is the actual command run by __git_ps1()):
$ ls untracked-dir/ |wc -l
100000
$ time git ls-files --others --exclude-standard --error-unmatch \
-- ':/*' >/dev/null 2>/dev/null
real 0m0.955s
user 0m0.936s
sys 0m0.016s
Eliminate this delay by additionally passing the '--directory
--no-empty-directory' options to 'git ls-files' to show only the name of
non-empty untracked directories instead of all their content:
bash prompt: test untracked files status indicator with untracked dirs
The next commit will tweak the way __git_ps1() decides whether to display
the untracked files status indicator in the presence of untracked
directories. Add tests to make sure it doesn't change current behavior,
in particular that an empty untracked directory doesn't trigger the
untracked files status indicator.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since d1c5f2a (Add git-am, applymbox replacement., 2005-10-07), git-am
supported the --utf8 and --no-utf8 options, and if set, would pass the
-u flag and the -k flag respectively.
git mailinfo -u will re-code the commit log message and authorship info
in the charset specified by i18n.commitencoding setting, while
git mailinfo -n will disable the re-coding.
Since d84029b (--utf8 is now default for 'git-am', 2007-01-08), --utf8
is set by default in git-am.
Add various encoding conversion tests to t3901 to test git-mailinfo's
encoding conversion. In addition, add a test for --no-utf8 to check that
no encoding conversion will occur if that option is set.
Helped-by: Johannes Sixt <j6t@kdbg.org> Reviewed-by: Stefan Beller <sbeller@google.com> Reviewed-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Paul Tan <pyokagan@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t3418: non-interactive rebase --continue with rerere enabled
Since 8389b52 (git-rerere: reuse recorded resolve., 2006-01-28), git-am
will call git-rerere to re-use recorded merge conflict resolutions if
any occur in a threeway merge.
Add a test to ensure that git-rerere is called by git-am (which handles
the non-interactive rebase).
Reviewed-by: Stefan Beller <sbeller@google.com> Reviewed-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Paul Tan <pyokagan@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 017678b (am/mailinfo: Disable scissors processing by default,
2009-08-26), git-am supported the --[no-]scissors option, passing it to
git-mailinfo.
Add tests to ensure that git-am will pass the --scissors option to
git-mailinfo, and that --no-scissors will override the configuration
setting of mailinfo.scissors.
Reviewed-by: Stefan Beller <sbeller@google.com> Reviewed-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Paul Tan <pyokagan@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since d1c5f2a (Add git-am, applymbox replacement., 2005-10-07),
git-am.sh will invoke the post-applypatch hook after the patch is
applied and a commit is made. The exit code of the hook is ignored.
Add tests for this hook.
Helped-by: Junio C Hamano <gitster@pobox.com> Reviewed-by: Stefan Beller <sbeller@google.com> Reviewed-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Paul Tan <pyokagan@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since d1c5f2a (Add git-am, applymbox replacement., 2005-10-07),
git-am.sg will invoke the pre-applypatch hook after applying the patch
to the index, but before a commit is made. Should the hook exit with a
non-zero status, git am will exit.
Add tests for this hook.
Helped-by: Junio C Hamano <gitster@pobox.com> Reviewed-by: Stefan Beller <sbeller@google.com> Reviewed-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Paul Tan <pyokagan@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since d1c5f2a (Add git-am, applymbox replacement., 2005-10-07), git-am
will invoke the applypatch-msg hooks just after extracting the patch
message. If the applypatch-msg hook exits with a non-zero status, git-am
abort before even applying the patch to the index.
Add tests for this hook.
Helped-by: Junio C Hamano <gitster@pobox.com> Reviewed-by: Stefan Beller <sbeller@google.com> Reviewed-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Paul Tan <pyokagan@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t4150: am --resolved fails if index has unmerged entries
Since c1d1128 (git-am --resolved: more usable error message.,
2006-04-28), git-am --resolved will check to see if there are any
unmerged entries, and will error out with a user-friendly error message
if there are.
Add a test for this.
Reviewed-by: Stefan Beller <sbeller@google.com> Reviewed-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Paul Tan <pyokagan@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t4150: am --resolved fails if index has no changes
Since 6d28644 (git-am: do not allow empty commits by mistake.,
2006-02-23), git-am --resolved will check to see if the index has any
changes to prevent the user from creating an empty commit by mistake.
Add a test for this.
Reviewed-by: Stefan Beller <sbeller@google.com> Reviewed-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Paul Tan <pyokagan@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since c95b138 (Fix git-am safety checks, 2006-09-15), when there is a
session in progress, git-am will check the command-line arguments and
standard input to ensure that the user does not pass it any patches.
Add a test for this.
Reviewed-by: Stefan Beller <sbeller@google.com> Reviewed-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Paul Tan <pyokagan@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 7b3b7e3 (am --abort: keep unrelated commits since the last failure
and warn, 2010-12-21), git-am --abort will not touch the index if on the
previous invocation, git-am failed because the index is dirty. This is
to ensure that the user's modifications to the index are not discarded.
Add a test for this.
Reviewed-by: Stefan Beller <sbeller@google.com> Reviewed-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Paul Tan <pyokagan@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since d1c5f2a (Add git-am, applymbox replacement., 2005-10-07), git-am
will ensure that the index is clean before applying the patch. This is
to prevent changes unrelated to the patch from being committed.
Add a test for this check.
Reviewed-by: Stefan Beller <sbeller@google.com> Reviewed-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Paul Tan <pyokagan@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
According to POSIX specification uname(2) must return -1 on failure
and a non-negative value on success. Although many implementations
do return 0 on success it is valid to return any positive value for
success. In particular, Solaris returns 1.
Signed-off-by: Charles Bailey <cbailey32@bloomberg.net> Reviewed-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of "checkout --to" that does not do what "checkout"
normally does, move the functionality to "git worktree add".
As this makes the end-user experience of the "worktree add" more or
less complete, I am tempted to say we should cook the other topic
that removes the internal "new-worktree-mode" hack from "checkout"
a bit longer in 'next', and release 2.5 final without that one.
* es/worktree-add:
Documentation/git: fix stale "MULTIPLE CHECKOUT MODE" reference
worktree: caution that this is still experimental
Documentation/git-worktree: fix stale "git checkout --to" references