Teach fetch --dry-run as users of "git remote prune" switching to "git fetch
--prune" may expect it. Unfortunately OPT__DRY_RUN() cannot be used as fetch
already uses "-n" for something else.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com> Signed-off-by: Björn Gustavsson <bgustavsson@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach fetch to cull stale remote tracking branches after fetching via --prune.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com> Signed-off-by: Björn Gustavsson <bgustavsson@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Implement the configuration skipFetchAll option to allow
certain remotes to be skipped when doing 'git fetch --all' and
'git remote update'. The existing skipDefaultUpdate variable
is still honored (by 'git fetch --all' and 'git remote update').
(If both are set in the configuration file with different values,
the value of the last occurrence will be used.)
Signed-off-by: Björn Gustavsson <bgustavsson@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add the --multiple option to specify that all arguments are either
groups or remotes. The primary reason for adding this option is
to allow us to re-implement 'git remote update' using fetch.
It would have been nice if this option was not needed, but since
the colon in a refspec is optional, it is in general not possible
to know whether a single, colon-less argument is a remote or a
refspec.
Signed-off-by: Björn Gustavsson <bgustavsson@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git remote' is meant for managing remotes and 'git fetch' is meant
for actually fetching data from remote repositories. Therefore, it is
not logical that you must use 'git remote update' to fetch from
more than one repository at once.
Add the --all option to 'git fetch', to tell it to attempt to fetch
from all remotes. Also, if --all is not given, the <repository>
argument is allowed to be the name of a group, to allow fetching
from all repositories in the group.
Other options except -v and -q are silently ignored.
Signed-off-by: Björn Gustavsson <bgustavsson@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-svn: hide find_parent_branch output in double quiet mode
Hide find_parent_branch logging when -qq is specified.
This eliminates more unnecessary output when run from cron, e.g.:
Found possible branch point:
http://undernet-ircu.svn.sourceforge.net/svnroot/undernet-ircu/ircu2/trunk =>
http://undernet-ircu.svn.sourceforge.net/svnroot/undernet-ircu/ircu2/branches/authz,
1919
Found branch parent: (authz) ea061d76aea985dc0208d36fa5e0b2249b698557
Following parent with do_switch
Successfully followed parent
Acked-by: Eric Wong <normalperson@yhbt.net> Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Documentation: clone: clarify discussion of initial branch
When saying the initial branch is equal to the currently active
remote branch, it is probably intended that the branch heads
point to the same commit. Maybe it would be more useful to a
new user to emphasize that the tree contents and history are the
same.
More important, probably, is that this new branch is set up so
that "git pull" merges changes from the corresponding remote
branch. The next paragraph addresses that directly. What the
reader needs to know to begin with is that (1) the initial branch
is your own; if you do not pull, it won't get updated, and that
(2) the initial branch starts out at the same commit as the
upstream.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Björn Gustavsson <bgustavsson@gmail.com> Acked-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Aliases with newlines have been a problem since commit 56fc25f (Bash
completion support for remotes in .git/config., 2006-11-05). The chance
of the problem occurring has been slim at best, until commit 518ef8f
(completion: Replace config --list with --get-regexp, 2009-09-11)
removed the case statement introduced by commit 56fc25f. Before removing
the case statement, most aliases with newlines would work unless they
were specially crafted as follows
After commit 511a3fc (wrap git's main usage string., 2009-09-12), the
bash completion for git commands includes COMMAND and [ARGS] when it
shouldn't. Fix this by grepping more strictly for a line with git
commands. It's doubtful whether git will ever have commands starting
with anything besides numbers and letters so this should be fine. At
least by being stricter we'll know when we break the completion earlier.
Signed-off-by: Stephen Boyd <bebarino@gmail.com> Acked-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
This fixes an obvious syntax error that snuck in commit 7e787953:
syntax error at /home/ingmar/bin//git-import-tars line 143, near "/^$/ { "
syntax error at /home/ingmar/bin//git-import-tars line 145, near "} else"
syntax error at /home/ingmar/bin//git-import-tars line 152, near "}"
Signed-off-by: Ingmar Vanhassel <ingmar@exherbo.org> Acked-and-Tested-by: Peter Krefting <peter@softwolves.pp.se> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Idealists may want USE_NSEC to be the default on Linux some day.
Point to a patch to better explain the requirements on
filesystem code for that to happen.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation seems to assume that the starting point for a new
branch is the tip of an existing (ordinary) branch, but that is not
the most common case. More often, "git branch" is used to begin
a branch from a remote-tracking branch, a tag, or an interesting
commit (e.g. origin/pu^2). Clarify the language so it can apply
to these cases. Thanks to Sean Estabrooks for the wording.
Also add a pointer to the user's manual for the bewildered.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update the documentation for --merged and --no-merged to explain
the meaning of the optional parameter introduced in commit 049716b
(branch --merged/--no-merged: allow specifying arbitrary commit,
2008-07-08).
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sounds better this way, at least to my ears. ("The syntax and
supported options of git merge" is a plural noun. "the same"
instead of "equal" sounds less technical and seems to convey
the meaning better here.)
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Documentation: git fmt-merge-msg does not have to be a script
The fmt-merge-message builtin can be invoked as "git fmt-merge-msg" rather
than through the hard link in GIT_EXEC_PATH. Although this is unlikely to
confuse most script writers, it should not hurt to make the documentation
a little clearer anyway.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are several reasons a git-pull invocation might not
have anything marked for merge:
1. We're not on a branch, so there is no branch
configuration.
2. We're on a branch, but there is no configuration for
this branch.
3. We fetched from the configured remote, but the
configured branch to merge didn't get fetched (either
it doesn't exist, or wasn't part of the fetch refspec).
4. We fetched from the non-default remote, but didn't
specify a branch to merge. We can't use the configured
one because it applies to the default remote.
5. We fetched from a specified remote, and a refspec was
given, but it ended up not fetching anything (this is
actually hard to do; if the refspec points to a remote
branch and it doesn't exist, then fetch will fail and
we never make it to this code path. But if you provide
a wildcard refspec like
refs/bogus/*:refs/remotes/origin/*
then you can see this failure).
We have handled (1) and (2) for some time. Recently, commit a6dbf88 added code to handle case (3).
This patch handles cases (4) and (5), which previously just
fell under other cases, producing a confusing message.
While we're at it, let's rewrap the text for case (3), which
looks terribly ugly as it is.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-svn: Avoid spurious errors when rewriteRoot is used.
After doing a rebase, git-svn checks that the SVN URL
is what it expects. However, it does not account for
rewriteRoot, which is a legitimate way for the URL
to change. This produces a lot of spurious errors.
[ew: fixed line wrapping]
Signed-off-by: Alexander Gavrilov <angavrilov@gmail.com> Acked-by: Eric Wong <normalperson@yhbt.net>
Makefile: add a note about the NO_MMAP setting on IRIX and IRIX64
When git is compiled with the MIPSpro 7.4.4m compiler, and NO_PTHREADS is
set, and NO_MMAP is _not_ set, then git segfaults when trying to access the
first entry in a reflog. If NO_PTHREADS is not set (which implies that the
pthread library is linked in), or NO_MMAP _is_ set, then the segfault is
not encountered. The conservative choice has been made to set NO_MMAP in
the Makefile to avoid this flaw. The GNU C compiler does not produce this
behavior.
The segfault happens in refs.c:read_ref_at(). The mmap succeeds, and the
loop is executed properly until rec is rewound into the first line (reflog
entry) of the file. The segfault is caught by test 28 of
t1400-update-ref.sh which fails when 'git rev-parse --verify "master@{May 25
2005}"' is called.
So, add a comment in the Makefile to describe why NO_MMAP is set and as a
hint to those who may be interested in unsetting it.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil> Signed-off-by: Junio C Hamano <gitster@pobox.com>
When ls-files was called with -i but no exclude pattern, it was
calling fprintf(stderr, "...", NULL) and then exiting. On Solaris,
passing NULL into fprintf was causing a segfault. On glibc systems,
it was simply producing incorrect output (eg: "(null)": ...). The
NULL pointer was a result of argv[0] not being preserved by the option
parser. Instead of requesting that the option parser preserve
argv[0], use die() with a constant string.
A trigger for this bug was: `git ls-files -i`
Signed-off-by: Ben Walton <bwalton@artsci.utoronto.ca> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Makefile: enable THREADED_DELTA_SEARCH on IRIX and IRIX64
Since commit dcda3614 removed the use of a variable length array from
builtin-pack-objects.c, it is now safe to compile with the threaded delta
search feature enabled. Formerly, the MIPSpro 7.4.4m compiler warned that
variable length arrays should not be used with pthreads.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil> Signed-off-by: Junio C Hamano <gitster@pobox.com>
During an MSVC build on cygwin, the make program did not notice
when the compiler or linker exited with an error. This was caused
by the scripts exiting with the value returned by system() directly.
On POSIX-like systems, such as cygwin, the return value of system()
has the exit code of the executed command encoded in the first byte
(ie the value is shifted up by 8 bits). This allows the bottom
7 bits to contain the signal number of a terminated process, while
the eighth bit indicates whether a core-dump was produced. (A value
of -1 indicates that the command failed to execute.)
The make program, however, expects the exit code to be encoded in the
bottom byte. Futhermore, it apparently masks off and ignores anything
in the upper bytes.
However, these scripts are (naturally) intended to be used on the
windows platform, where we can not assume POSIX-like semantics from
a perl implementation (eg ActiveState). So, in general, we can not
assume that shifting the return value right by eight will get us
the exit code.
In order to improve portability, we assume that a zero return from
system() indicates success, whereas anything else indicates failure.
Since we don't need to know the exact exit code from the compiler
or linker, we simply exit with 0 (success) or 1 (failure).
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk> Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the MSVC section of the Makefile, BASIC_CFLAGS is set to a
value which contains the string "-DWIN32-D_CONSOLE". This results
in a (single) malformed -Define being passed to the compiler.
At least on my cygwin installation, the msvc compiler seems to
ignore this parameter, without issuing an error or warning, and
results in the WIN32 and _CONSOLE macros being undefined. This
breaks the build.
In order to fix the build, we simply insert a space between the
two -Define parameters, "-DWIN32" and "-D_CONSOLE", as originally
intended.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk> Signed-off-by: Junio C Hamano <gitster@pobox.com>
With --prefix=string that does not end with a slash, the top-level entries
are written out with the specified prefix as expected, but no paths in the
directories are added.
Fix this by adding the prefix in write_archive_entry() instead of letting
get_pathspec() and read_tree_recursive() pair; they are designed to only
handle prefixes that are path components.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>
fast-import.c::validate_raw_date(): really validate the value
When reading the "raw format" timestamp from the input stream, make sure
that the timezone offset is a reasonable value by imitating 7122f82
(date.c: improve guess between timezone offset and year., 2006-06-08).
We _might_ want to also check if the timestamp itself is reasonable, but
that is left for a separate commit.
Back when a74b170 (git-pull: disallow implicit merging to detached HEAD,
2007-01-15) added this check, $? referred to the error status of reading
HEAD as a symbolic-ref; but cd67e4d (Teach 'git pull' about --rebase,
2007-11-28) moved the command away from where the check is, and nobody
noticed the breakage. Ever since, $? has always been 0 (tr at the end of
the pipe to find merge_head never fails) and other case arms were never
reached.
These days, error_on_no_merge_candidates function is prepared to handle a
detached HEAD case, which was what the code this patch removes used to
handle.
show-branch: fix segfault when showbranch.default exists
When running "git show-branch" without any parameter in a repository that
has showbranch.default defined, we used to rely on the fact that our
handcrafted option parsing loop never looked at av[0].
The array of default strings had the first real command line argument in
default_arg[0], but the option parser wanted to look at the array starting
at av[1], so we assigned the address of -1th element to av to force the
loop start working from default_arg[0].
This no longer worked since 5734365 (show-branch: migrate to parse-options
API, 2009-05-21), as parse_options_start() saved the incoming &av[0] in
its ctx->out and later in parse_options_end() it did memmove to ctx->out
(with ctx->cpidx == 0), overwriting the memory before default_arg[] array.
I am not sure if this is a bug in parse_options(), or a bug in the caller,
and tonight I do not have enough concentration to figure out which. In
any case, this patch works the issue around.
commit 51ea551 ("make sure byte swapping is optimal for git"
2009-08-18) introduced a "sane definition for ntohl()/htonl()"
for use on some GNU C platforms. Unfortunately, for some of
these platforms, this results in the introduction of a problem
which is essentially the reverse of a problem that commit 6e1c234
("Fix some warnings (on cygwin) to allow -Werror" 2008-07-3) was
intended to fix.
In particular, on platforms where the uint32_t type is defined
to be unsigned long, the return type of the new ntohl()/htonl()
is causing gcc to issue printf format warnings, such as:
warning: long unsigned int format, unsigned int arg (arg 3)
(nine such warnings, covering six different files). The earlier
commit (6e1c234) needed to suppress these same warnings, except
that the types were in the opposite direction; namely the format
specifier ("%u") was 'unsigned int' and the argument type (ie the
return type of ntohl()) was 'long unsigned int' (aka uint32_t).
In order to suppress these warnings, the earlier commit used the
(C99) PRIu32 format specifier, since the definition of this macro
is suitable for use with the uint32_t type on that platform.
This worked because the return type of the (original) platform
ntohl()/htonl() functions was uint32_t.
In order to suppress these warnings, we change the return type of
the new byte swapping functions in the compat/bswap.h header file
from 'unsigned int' to uint32_t.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk> Acked-by: Nicolas Pitre <nico@fluxnic.net> Signed-off-by: Jeff King <peff@peff.net>
For example:
alias -group friends foo Foo Bar <foo@bar.com>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Acked(-and-tested)-by: Eric Wong <normalperson@yhbt.net> Signed-off-by: Jeff King <peff@peff.net>
Some compilers (including at least MSVC and ARM RVDS) supports
NORETURN on function declarations, but not on function pointers.
This patch makes it possible to define NORETURN for these compilers,
by splitting the NORETURN macro into two - one for function
declarations and one for function pointers.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com> Signed-off-by: Jeff King <peff@peff.net>
When we show a reflog, we have two ways of naming the entry:
by sequence number (e.g., HEAD@{0}) or by date (e.g.,
HEAD@{10 minutes ago}). There is no explicit option to set
one or the other, but we guess based on whether or not the
user has provided us with a date format, showing them the
date version if they have done so, and the sequence number
otherwise.
This usually made sense if the use did something like "git
log -g --date=relative". However, it didn't make much sense
if the user set the date format using the log.date config
variable; in that case, all of their reflogs would end up as
dates.
This patch records the source of the date format and only
triggers the date-based view if --date= was given on the
command line.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
builtin-mailinfo.c: check error status from rewind and ftruncate
A recent "cut at scissors" implementation rewinds and truncates
the output file to store the message when it sees a scissors mark,
but it did not check if these library calls succeeded.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
[sp: Use fseek as rewind returns void] Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Make just opening the generated MSVC solution file not modify it
The format of the generated MSVC solution file is fixed in a way that
just opening it in Visual Studio and immediately closing it again
without performing any modifications does not trigger a prompt to save
the solution file. This behavior was caused by several minor
incompatibilities between the generated file and what Visual Studio
2008 expected, so Visual Studio transparently fixed the file format,
marking it internally as modified.
Signed-off-by: Sebastian Schuberth <sschuberth@gmail.com> Acked-by: Marius Storm-Olsen <mstormo@gmail.com> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Make generated MSVC solution file open from Windows Explorer
In order to be able to open the generated solution file by double-
clicking it in Windows Explorer, all project files need to use DOS
line-endings and a comment about the Visual Studio version needs to
be added to the header of the solution file. This also fixes the icon
that is displayed for the solution file in Windows Explorer.
Note that opening the solution file from a running instance of Visual
Studio already worked before.
Signed-off-by: Sebastian Schuberth <sschuberth@gmail.com> Acked-by: Marius Storm-Olsen <mstormo@gmail.com> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Defining UNICODE for MSVC IDE builds results in certain Win32 WIDE
API's receiving ANSI strings. The result of which is an invalid use
of the API and will end in either data corruption or an application
crash.
Prevent the use of WIDE API's when building with the MSVC IDE for
compatibility with msysGit.
Signed-off-by: Michael Wookey <michaelwookey@gmail.com> Acked-by: Marius Storm-Olsen <mstormo@gmail.com> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
git branch -D: give a better error message when lockfile creation fails
Previously the old error message just told the user that it was not
possible to delete the ref from the packed-refs file. Give instructions
on how to resolve the problem.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
parse-opt: ignore negation of OPT_NONEG for ambiguity checks
parse_long_opt always matches both --opt and --no-opt for any option
"opt", and only get_value checks whether --no-opt is actually valid.
Since the options for git branch contains both "no-merged" and "merged"
there are two matches for --no-merge, but no exact match. With this
patch the negation of a NONEG option is rejected earlier, but it changes
the error message from "option `no-opt' isn't available" to "unknown
option `no-opt'".
[jk: added test]
Signed-off-by: Andreas Schwab <schwab@linux-m68k.org> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
make 'git clone' ask the remote only for objects it cares about
Current behavior of 'git clone' when not using --mirror is to fetch
everything from the peer, and then filter out unwanted refs just before
writing them out to the cloned repository. This may become highly
inefficient if the peer has an unusual ref namespace, or if it simply
has "remotes" refs of its own, and those locally unwanted refs are
connecting to a large set of objects which becomes unreferenced as soon
as they are fetched.
Let's filter out those unwanted refs from the peer _before_ asking it
what refs we want to fetch instead, which is the most logical thing to
do anyway.
Signed-off-by: Nicolas Pitre <nico@fluxnic.net> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
perl/Makefile.PL: detect MakeMaker versions incompatible with DESTDIR
It appears that ExtUtils::MakeMaker versions older than 6.11 do not
implement the DESTDIR mechanism. So add a test to the generated perl.mak
to detect when DESTDIR is used along with a too old ExtUtils::MakeMaker and
abort with a message suggesting the use of NO_PERL_MAKEMAKER.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
pull: Clarify "helpful" message for another corner case
When the remote branch we asked for merging did not exist in the set of
fetched refs, we unconditionally hinted that it was because of lack of
configuration. It is not necessarily so, and risks sending users for a
wild goose chase.
Make sure to check if that is indeed the case before telling a wild guess
to the user.
This update adds 'git stash (apply|pop) --quiet' and all options known
to 'git stash save', and handles the DWIMery from 3c2eb80f (stash:
simplify defaulting to "save" and reject unknown options, 2009-08-18).
Care is taken to avoid offering subcommands in the DWIM case.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de> Acked-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
bash: rename __git_find_subcommand() to __git_find_on_cmdline()
__git_find_subcommand() was originally meant to check whether
subcommands are already present on the command line. But the code is
general enough to be used for checking the presence of command line
options as well, and the next commit will use it for that purpose, so
let's give it a more general name.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de> Acked-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
pay attention to DESTDIR when building with NO_PERL_MAKEMAKER
Building with prefix=/some/where and temporarily installing it to
elsewhere for tar'ing up is done with:
make prefix=/some/where
make prefix=/some/where DESTDIR=/else/where install
Make handcrafted perl/perl.mak without NO_PERL_MAKEMAKER honour DESTDIR.
Ancient ExtUtils::MakeMaker (pre 6.11?) has the same issue, but recent
versions of Perl ships with at leat 6.17; this patch does not address that
issue.
test-genrandom: ensure stdout is set to _O_BINARY on Windows
Commit a6ca8c62 (Set _O_BINARY as default fmode for both MinGW and MSVC)
removed the definition of _CRT_fmode from mingw.c. Before this commit,
since test-genrandom is linked against libgit.a, the MinGW process
initialization code would pick up that definition of _CRT_fmode, which was
initialized to _O_BINARY. After this commit, however, text mode is used
for std(in|out|err) because it is the default in absence of _CRT_fmode.
In order to fix that, we must use git-compat-util.h, which overrides
main() to set the mode to binary.
Signed-off-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* git://git.kernel.org/pub/scm/gitk/gitk:
gitk: Work around leftover temporary save file
gitk: Show diff of commits at end of compare-commits output
gitk: Update Swedish translation (280t0f0u)
If a file exists and is hidden on Windows the Tcl open command will
fail as the attributes provided in the CREAT call fail to match those
of the existing file. Forcing removal of the temporary file before we
begin solves any problems caused by previous failures to save the
application settings. An alternative would be to remove the hidden
attribute before calling 'open'.
Signed-off-by: Pat Thoyts <patthoyts@users.sourceforge.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
push: Correctly initialize nonfastforward in transport_push.
The variable is assigned unconditionally in print_push_status, but
print_push_status is not reached by all codepaths. In particular, this
fixes a bug where "git push ... nonexisting-branch" was complaining about
non-fast forward.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add scripts to generate projects for other buildsystems (MSVC vcproj, QMake)
These scripts generate projects for the MSVC IDE (.vcproj files) or
QMake (.pro files), based on the output of a 'make -n MSVC=1 V=1' run.
This enables us to simply do the necesarry changes in the Makefile, and you
can update the other buildsystems by regenerating the files. Keeping the
other buildsystems up-to-date with main development.
The generator system is designed to easily drop in pm's for other
buildsystems as well, if someone has an itch. However, the focus has been
Windows development, so the 'engine' might need patches to support any
platform.
Also add some .gitignore entries for MSVC files.
Signed-off-by: Marius Storm-Olsen <mstormo@gmail.com> Acked-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Enable MSVC builds with GNU Make by simply calling
make MSVC=1
(Debug build possible by adding DEBUG=1 as well)
Two scripts, clink.pl and lib.pl, are used to convert certain GCC
specific command line options into something MSVC understands.
By building for MSVC with GNU Make, we can ensure that the MSVC
port always follows the latest code, and does not lag behind due
to unmaintained NMake Makefile or IDE projects.
Signed-off-by: Marius Storm-Olsen <mstormo@gmail.com> Acked-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Centralize the include of windows.h in git-compat-util.h, turn on
WIN32_LEAN_AND_MEAN to avoid including plenty of other header files
which is not needed in Git. Also ensure we load winsock2.h first,
so we don't load the older winsock definitions at a later stage,
since they contain duplicate definitions.
When moving windows.h into git-compat-util.h, we need to protect
the definition of struct pollfd in mingw.h, since this file is used
by both MinGW and MSVC, and the latter defines this struct in
winsock2.h.
We need to keep the windows.h include in compat/win32.h, since its
shared by both MinGW and Cygwin, and we're not touching Cygwin in
this commit. The include in git-compat-util.h is protected with an
ifdef WIN32, which is not the case when compiling for Cygwin.
Signed-off-by: Marius Storm-Olsen <mstormo@gmail.com> Acked-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Frank Li <lznuaa@gmail.com> Signed-off-by: Marius Storm-Olsen <mstormo@gmail.com> Acked-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Added the header files dirent.h, unistd.h and utime.h
Add alloca.h, which simply includes malloc.h, which defines alloca().
Signed-off-by: Frank Li <lznuaa@gmail.com> Signed-off-by: Marius Storm-Olsen <mstormo@gmail.com> Acked-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code which is conditional on MinGW32 is actually conditional on Windows.
Use the WIN32 symbol, which is defined by the MINGW32 and MSVC environments,
but not by Cygwin.
Define SNPRINTF_SIZE_CORR=1 for MSVC too, as its vsnprintf function does
not add NUL at the end of the buffer if the result fits the buffer size
exactly.
Signed-off-by: Frank Li <lznuaa@gmail.com> Signed-off-by: Marius Storm-Olsen <mstormo@gmail.com> Acked-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
MSVC requires __stdcall to be between the functions return value and the
function name, and that the function pointer type is in the form of
return_type (WINAPI *function_name)(arguments...)
Signed-off-by: Frank Li <lznuaa@gmail.com> Signed-off-by: Marius Storm-Olsen <mstormo@gmail.com> Acked-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Set _O_BINARY as default fmode for both MinGW and MSVC
MinGW set the _CRT_fmode to set both the default fmode and _O_BINARY on
stdin/stdout/stderr. Rather use the main() define in mingw.h to set this
for both MinGW and MSVC.
This will ensure that a MinGW and MSVC build will handle input and output
identically.
Signed-off-by: Marius Storm-Olsen <mstormo@gmail.com> Acked-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change regerror() declaration from K&R style to ANSI C (C89)
The MSVC headers typedef errcode as int, and thus confused the compiler in
the K&R style definition. ANSI style deconfuses it.
Signed-off-by: Frank Li <lznuaa@gmail.com> Signed-off-by: Marius Storm-Olsen <mstormo@gmail.com> Acked-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>