* ms/filter-branch-submodule:
filter-branch: Add tests for submodules in tree-filter
filter-branch: Fix to allow replacing submodules with another content
* 'jh/gitweb-caching' (early part):
gitweb: Add optional extra parameter to die_error, for extended explanation
gitweb: add a "string" variant of print_sort_th
gitweb: add a "string" variant of print_local_time
gitweb: Check that $site_header etc. are defined before using them
gitweb: Makefile improvements
gitweb: Load checking
gitweb: Make running t9501 test with '--debug' reliable and usable
This patch allows someone to use configure to build git while at the
same time disabling the python remote helper code. It leverages the
ability of GIT_ARG_SET_PATH to accept an optional second argument
indicating that --without-$PROGRAM is acceptable.
Signed-off-by: Ben Walton <bwalton@artsci.utoronto.ca> Signed-off-by: Junio C Hamano <gitster@pobox.com>
configure: Allow GIT_ARG_SET_PATH to handle --without-PROGRAM
Add an optional second argument to both GIT_ARG_SET_PATH and
GIT_CONF_APPEND_PATH such that any value of the second argument will
enable configure to set NO_$PROGRAM in addition to an empty
$PROGRAM_PATH. This is initially useful for allowing configure to
disable the use of python, as the remote helper code has nothing
leveraging it yet.
The Makefile already recognizes NO_PYTHON, but configure provided no
way to set it appropriately.
Signed-off-by: Ben Walton <bwalton@artsci.utoronto.ca> Signed-off-by: Junio C Hamano <gitster@pobox.com>
fast-import: Stream very large blobs directly to pack
If a blob is larger than the configured big-file-threshold, instead
of reading it into a single buffer obtained from malloc, stream it
onto the end of the current pack file. Streaming the larger objects
into the pack avoids the 4+ GiB memory footprint that occurs when
fast-import is processing 2+ GiB blobs.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The P4D/NTX64/2009.2/228098 (2009/12/16) server reports
'move/delete' instead of 'delete'. This causes the Perforce
depot and the git repo to get out of sync. Fixed by adding
the new status string.
Signed-off-by: Pal-Kristian Engstad <pal_engstad@naughtydog.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Updates for dirty submodules in release notes and user manual
In the release notes "git status" was not mentioned, also shortly explain
the "-dirty" output generated by diff.
Added a paragraph to the "Pitfalls with submodules" section in
user-manual.txt describing new and old behavior of "git status" and "git
diff" for dirty submodules.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make NO_PTHREADS the sole thread configuration variable
When the first piece of threaded code was introduced in commit 8ecce684, it
came with its own THREADED_DELTA_SEARCH Makefile option. Since this time,
more threaded code has come into the codebase and a NO_PTHREADS option has
also been added. Get rid of the original option as the newer, more generic
option covers everything we need.
Signed-off-by: Dan McGee <dpmcgee@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
mention new shell execution behavior in release notes
This is already in the "bells and whistles" section, but it also has a
slight chance of breakage, so let's also mention it in the "changed
behaviors" section.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The strbuf used in add_submodule_odb() was never released. So for every
submodule - populated or not - we leaked its object directory name when
using "git diff*" with the --submodule option.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
gitweb: Add optional extra parameter to die_error, for extended explanation
Add a 3rd, optional, parameter to die_error to allow for extended error
information to be output along with what the error was.
Signed-off-by: John 'Warthog9' Hawley <warthog9@kernel.org> Signed-off-by: Jakub Narebski <jnareb@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a function (named format_sort_th) that returns the string that
print_sort_th would print.
Signed-off-by: John 'Warthog9' Hawley <warthog9@kernel.org> Signed-off-by: Jakub Narebski <jnareb@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
gitweb: add a "string" variant of print_local_time
Add a function (named format_local_time) that returns the string that
print_local_time would print.
Signed-off-by: John 'Warthog9' Hawley <warthog9@kernel.org> Signed-off-by: Jakub Narebski <jnareb@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
gitweb: Check that $site_header etc. are defined before using them
If one of $site_header, $site_footer or $home_text is not defined, you
get extraneous errors in the web logs, for example (line wrapped for
better readibility):
[Wed Jan 13 16:55:42 2010] [error] [client ::1] [Wed Jan 13 16:55:42 2010]
gitweb.cgi: Use of uninitialized value $site_header in -f at
/var/www/gitweb/gitweb.cgi line 3287., referer: http://git/gitweb.cgi
This ensures that those variables are defined before trying to use it.
Note that such error can happen only because of an error in gitweb
config file; building gitweb.cgi can make mentioned variables holding
empty string (it is even the default), but they are still defined.
Signed-off-by: John 'Warthog9' Hawley <warthog9@kernel.org> Signed-off-by: Jakub Narebski <jnareb@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
which in turn calls gitweb/Makefile. This means that in order to
generate gitweb, you can simply run 'make' from gitweb subdirectory:
cd gitweb
make
Targets gitweb/gitweb.cgi and (dependent on JSMIN being defined)
gitweb/gitweb.min.js in main Makefile are preserved for backward
compatibility.
Signed-off-by: John 'Warthog9' Hawley <warthog9@kernel.org> Signed-off-by: Jakub Narebski <jnareb@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
This changes slightly the behavior of gitweb, so that it verifies
that the box isn't inundated with before attempting to serve gitweb.
If the box is overloaded, it basically returns a 503 Server Unavailable
until the load falls below the defined threshold. This helps dramatically
if you have a box that's I/O bound, reaches a certain load and you
don't want gitweb, the I/O hog that it is, increasing the pain the
server is already undergoing.
This behavior is controlled by $maxload configuration variable.
Default is a load of 300, which for most cases should never be hit.
Unset it (set it to undefined value, i.e. undef) to turn off checking.
Currently it requires that '/proc/loadavg' file exists, otherwise the
load check is bypassed (load is taken to be 0). So platforms that do
not implement '/proc/loadavg' currently cannot use this feature
(provisions are included for additional checks to be added by others).
There is simple test in t/t9501-gitweb-standalone-http-status.sh to
check that it correctly returns "503 Service Unavailable" if load is
too high, and also if there are any Perl warnings or errors.
Signed-off-by: John 'Warthog9' Hawley <warthog9@kernel.org> Signed-off-by: Jakub Narebski <jnareb@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
gitweb: Make running t9501 test with '--debug' reliable and usable
Remove test_debug lines after 'snapshots: tgz only default format
enabled' and 'snapshots: all enabled in default, use default disabled
value' tests. Those tests constitute of multiple gitweb_run
invocation, therefore outputting gitweb.output for the last gitweb_run
wouldn't help much in debugging test failure, and can only confuse.
For snapshot tests which check for "200 OK" status, change
test_debug 'cat gitweb.output'
to
test_debug 'cat gitweb.headers'
Otherwise when running this test with '--debug' option,
t/t9501-gitweb-standalone-http-status.sh would dump *binary data* (the
snapshot itself) to standard output, which can mess up state of terminal
due to term control characters which can be embedded in output.
Signed-off-by: Jakub Narebski <jnareb@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
is_submodule_modified(): fix breakage with external GIT_INDEX_FILE
Even when the environment was given for the top-level process, checking
in the submodule work tree should use the index file associated with the
work tree of the submodule. Do not export it to the environment.
RPM packaging: don't include foreign-scm-helper bits yet
The files in /usr/lib/python* are only the support infrastructure for
foreign scm interface yet to be written and/or shipped with git. Don't
include them in the binary package (this will also free us from Python
dependency).
When we ship with foreign scm interface, we will need to package these
files with it in a separate subpackage, but we are not there yet.
We duplicate the grep_opt structure when using grep threads, but didn't
later free either the patterns attached to this new structure or the
structure itself.
Signed-off-by: Dan McGee <dpmcgee@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
rebase: don't invoke the pager for each commit summary
This regression was introduced by commit 0aa958d (rebase: replace
antiquated sed invocation, 2010-01-24), which changed the invocation of
"git rev-list | sed" to "git log".
It can be reproduced by something like this:
$ git rebase -s recursive origin/master
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
See http://www.cse.wustl.edu/~schmidt/win32-cv-1.html, section "The
SignalObjectAndWait solution". But note that this implementation does not
use SignalObjectAndWait (which is needed to achieve fairness, but we do
not need fairness).
Note that our implementations of pthread_cond_broadcast and
pthread_cond_signal require that they are invoked with the mutex held that
is used in the pthread_cond_wait calls.
Signed-off-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
If deriving SVN_SSH from GIT_SSH on msys, also add quotes
In contrast to GIT_SSH, SVN_SSH requires quotes for paths that contain
spaces. As GIT_SSH will not work if it contains quotes, it is safe to
assume it never contains quotes. Also, adding quotes to SVN_SSH for paths
that do not contain spaces does no harm. So we always add quotes when
deriving SVN_SSH from GIT_SSH on msys.
This fixes msysGit issue 385, see
http://code.google.com/p/msysgit/issues/detail?id=385
Signed-off-by: Sebastian Schuberth <sschuberth@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Even though this script is expected to be sourced instead of
executed on its own, the #!/bin/sh line provides simple
documentation about what format the file is in.
In particular, the lack of such a line was confusing the
valgrind support of our test scripts, which assumed that any
executable without a #!-line should be intercepted and run
through valgrind. So during valgrind-enabled tests, any
script sourcing this file actually sourced the valgrind
interception script instead.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Caught by valgrind in t5500, but it is pretty obvious from
reading the code that this is shifting elements of an array
to the left, which needs memmove.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Emmanuel Trillaud <etrillaud@gmail.com> Signed-off-by: Thomas Moulard <thomas.moulard@gmail.com> Signed-off-by: Guy Brand <gb@unistra.fr> Signed-off-by: Nicolas Sebrecht <nicolas.s.dev@gmx.fr> Signed-off-by: Paul Mackerras <paulus@samba.org>
filter-branch: Add tests for submodules in tree-filter
Add tests to make sure that:
1) a submodule can be removed and its content replaced with regular files
('rewrite submodule with another content'). This test passes only with
the previous patch applied.
2) it is possible to replace submodule revision by direct index
manipulation ('replace submodule revision'). Although it would be
better to run such a filter in --index-filter, this test shows that
this functionality is not broken by the previous patch. This succeeds
both with and without the previous patch.
Signed-off-by: Michal Sojka <sojkam1@fel.cvut.cz> Signed-off-by: Junio C Hamano <gitster@pobox.com>
error: submod: is a directory - add files inside instead
The reason is that git diff-index, which generates the first part of the
list of files updated by the tree filter, emits also the removed submodule
even if it was replaced by a real directory.
Signed-off-by: Michal Sojka <sojkam1@fel.cvut.cz> Signed-off-by: Junio C Hamano <gitster@pobox.com>
bash: don't offer remote transport helpers as subcommands
Since commits a2d725b7 (Use an external program to implement fetching
with curl, 2009-08-05) and c9e388bb (Make the
"traditionally-supported" URLs a special case, 2009-09-03) remote
transport helpers like 'remote-ftp' and 'remote-curl' are offered by the
completion script as available subcommands. Not good, since they are
helpers, therefore should not be offered, so filter them out.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de> Acked-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Something like foo@{-1} is nonsensical, as the @{-N} syntax
is reserved for "the Nth last branch", and is not an actual
reflog selector. We should not feed such nonsense to
approxidate at all.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously interpret_branch_name would see @{-1} and stop
parsing, leaving the @{u} as cruft that provoked an error.
Instead, we should recurse if there is more to parse.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The original version used relative approxidates, which don't
reproduce as reliably as absolute ones. Commit 6c647a fixed
this for one case, but missed the "silly" case.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
"diff --cc" output t4038 tests was fixed by b810cbb (diff --cc: a lost
line at the beginning of the file is shown incorrectly, 2009-07-22), which
was actually the commit that introduced this test..
An error in "git merge -s resolve" t6035 tests was fixed by 730f728
(unpack-trees.c: look ahead in the index, 2009-09-20).
* jc/maint-reflog-bad-timestamp:
t0101: use a fixed timestamp when searching in the reflog
Update @{bogus.timestamp} fix not to die()
approxidate_careful() reports errorneous date string
remote.<remote>.vcs causes remote->foreign_vcs to be set on entry to
transport_get(). Unfortunately, the code assumed that any such entry
is stale from previous round.
Fix this by making VCS set by URL to be volatile w.r.t. transport_get()
instead.
Signed-off-by: Ilari Liusvaara <ilari.liusvaara@elisanet.fi> Acked-by: Daniel Barkalow <barkalow@iabervon.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The caller will say "It is not a valid object name" if it wants to, and
some callers may even try to see if it names an object and otherwise try to
see if it is a path.
* jl/diff-submodule-ignore:
Teach diff --submodule that modified submodule directory is dirty
git diff: Don't test submodule dirtiness with --ignore-submodules
Make ce_uptodate() trustworthy again
work around an obnoxious bash "safety feature" on OpenBSD
Bash (4.0.24) on OpenBSD 4.6 refuses to run this snippet:
$ cat gomi.sh
#!/bin/sh
one="/var/tmp/1 1"
rm -f /var/tmp/1 "/var/tmp/1 1"
echo hello >$one
$ sh gomi.sh; ls /var/tmp/1*
/var/tmp/1 1
$ bash gomi.sh; ls /var/tmp/1*
gomi.sh: line 4: $one: ambiguous redirect
ls: /var/tmp/1*: No such file or directory
Every competent shell programmer knows that a <$word in redirection is not
subject to field splitting (POSIX.1 "2.7 Redirection" explicitly lists the
kind of expansion performed: "... the word that follows the redirection
operator shall be subjected to ...", and "Field Splitting" is not among
them).
Some clueless folks apparently decided that users need to be protected in
the name of "security", however.
Output from "git grep -e '> *\$' -- '*.sh'" indicates that rebase-i
suffers from this bogus "safety". Work it around by surrounding the
variable reference with a dq pair.
approxidate_careful() reports errorneous date string
For a long time, the time based reflog syntax (e.g. master@{yesterday})
didn't complain when the "human readable" timestamp was misspelled, as
the underlying mechanism tried to be as lenient as possible. The funny
thing was that parsing of "@{now}" even relied on the fact that anything
not recognized by the machinery returned the current timestamp.
Introduce approxidate_careful() that takes an optional pointer to an
integer, that gets assigned 1 when the input does not make sense as a
timestamp.
As I am too lazy to fix all the callers that use approxidate(), most of
the callers do not take advantage of the error checking, but convert the
code to parse reflog to use it as a demonstration.
git-cvsserver: allow regex metacharacters in CVSROOT
When run in a repository with a path name containing regex metacharacters
(e.g. +), git-cvsserver failed to split the client request into CVSROOT
and module. Now metacharacters are disabled for the value of CVSROOT in
the perl regex so that directory names containing metacharacters are
handled properly.
Signed-off-by: Gerrit Pape <pape@smarden.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
builtin-config: Fix crash when using "-f <relative path>" from non-root dir
When your current directory is not at the root of the working tree, and you
use the "-f" option with a relative path, the current code tries to read
from a wrong file, since argv[2] is now beyond the end of the rearranged
argument list.
This patch replaces the incorrect argv[2] with the variable holding the
given config file name.
The bug was introduced by d64ec16 (git config: reorganize to use parseopt).
[jc: added test]
Signed-off-by: Johan Herland <johan@herland.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow using "["<host>"]":<port> and "["<host>"]" notations in git://
host addresses. This is needed to be able to connect to addresses
that contain ':' (e.g. numeric IPv6 addresses). Also send the host
header []-wrapped so it can actually be parsed by remote end.
Signed-off-by: Ilari Liusvaara <ilari.liusvaara@elisanet.fi> Signed-off-by: Junio C Hamano <gitster@pobox.com>
If host address could have ':' in it (e.g. numeric IPv6 address), then
host and port could not be uniquely parsed. Fix this by parsing the
"["<host>"]":<port> and "["<host>"]" notations. Currently the built-in
git:// client would send <host>:<port> or <host> for such thing, but
it doesn't matter as due to bugs, resolving address fails if <host>
contains ':'.
Signed-off-by: Ilari Liusvaara <ilari.liusvaara@elisanet.fi> Signed-off-by: Junio C Hamano <gitster@pobox.com>
grep: use REG_STARTEND (if available) to speed up regexec
BSD and glibc have an extension to regexec which takes a buffer + length pair
instead of a NUL-terminated string. Since we already have the length computed
this can save us a strlen call inside regexec.
Signed-off-by: Benjamin Kramer <benny.kra@googlemail.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
am: fix patch format detection for Thunderbird "Save As" emails
The patch detection wants to inspect all the headers of a rfc2822 message
and ensure that they look like header fields. The headers are always
separated from the message body with a blank line. When Thunderbird saves
the message the blank line separating the headers from the body includes a
CR. The patch detection is failing because a CRLF doesn't match /^$/. Fix
this by allowing a CR to exist on the separating line.
Signed-off-by: Stephen Boyd <bebarino@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
append_cr(), remove_cr(), q_to_nul() and q_to_cr() are defined in multiple
tests. Consolidate them into test-lib.sh so we can stop redefining them.
The use of remove_cr() in t0020 to test for a CR is replaced with a new
function has_cr() to accurately reflect what is intended (the output of
remove_cr() was being thrown away).
Signed-off-by: Stephen Boyd <bebarino@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach "git grep" a new "-q" option to report the presense of a match via
its exit status without showing any output, similar to how "grep -q"
works. Internally "grep" engine already knew this "status-only" mode of
operation because it needed to grep inside log message to filter commits
when called from the "git log" machinery, and this patch only exposes it
to the command line tool.
A somewhat unfair benchmark in the Linux kernel directory shows a dramatic
improvement:
(with patch)
$ time ../git.git/git grep -q linux HEAD ; echo $?
real 0m0.030s
user 0m0.004s
sys 0m0.004s
0
(without patch)
$ time git grep linux HEAD >/dev/null; echo $?
real 0m4.432s
user 0m4.272s
sys 0m0.076s
0
This is "somewhat unfair" because I knew a file with such a string comes
very early in the tree traversal (namely, ".gitignore").
t5541-http-push: make grep expression check for one line only
Don't feed a multiple-line pattern to grep and expect the them to match
with lines in order.
Simplify the grep expressions in the non-fast-forward tests to check
only for the first line of the non-fast-forward warning - having that
line should be enough assurance that the full warning is printed.
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach diff --submodule that modified submodule directory is dirty
Since commit 8e08b4 git diff does append "-dirty" to the work tree side
if the working directory of a submodule contains new or modified files.
Lets do the same when the --submodule option is used.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git diff: Don't test submodule dirtiness with --ignore-submodules
The diff family suppresses the output of submodule changes when
requested but checks them nonetheless. But since recently submodules
get examined for their dirtiness, which is rather expensive. There is
no need to do that when the --ignore-submodules option is used, as
the gathered information is never used anyway.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
In Internet Explorer 8 (IE8) the 'blame_incremental' view, which uses
JavaScript to generate blame info using AJAX, sometimes hang at the
beginning (at 0%) of blaming, e.g. for larger files with long history
like git's own gitweb/gitweb.perl.
The error shown by JavaScript console is "Unspecified error" at char:2
of the following line in gitweb/gitweb.js:
if (xhr.readyState === 3 && xhr.status !== 200) {
Debugging it using IE8 JScript debuger shown that the error occurs
when trying to access xhr.status (xhr is XMLHttpRequest object).
Watch for xhr object shows 'Unspecified error.' as "value" of
xhr.status, and trying to access xhr.status from console throws error.
This bug is some intermittent bug, depending on XMLHttpRequest timing,
as it doesn't occur in all cases. It is probably caused by the fact
that handleResponse is called from timer (pollTimer), to work around
the fact that some browsers call onreadystatechange handler only once
for each state change, and not like required for 'blame_incremental'
as soon as new data is available from server. It looks like xhr
object is not properly initialized; still it is a bug to throw an
error when accessing xhr.status (and not use 'null' or 'undefined' as
value).
Work around this bug in IE8 by using try-catch block when accessing
xhr.status.
Signed-off-by: Jakub Narebski <jnareb@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/fix-tree-walk:
read-tree --debug-unpack
unpack-trees.c: look ahead in the index
unpack-trees.c: prepare for looking ahead in the index
Aggressive three-way merge: fix D/F case
traverse_trees(): handle D/F conflict case sanely
more D/F conflict tests
tests: move convenience regexp to match object names to test-lib.sh
* maint:
git-gui: work from the .git dir
git-gui: Fix applying a line when all following lines are deletions
git-gui: Correct file_states when unstaging partly staged entry
git-gui: Fix gitk for branch whose name matches local file
git-gui: Keep repo_config(gui.recentrepos) and .gitconfig in sync
git-gui: handle really long error messages in updateindex.
git-gui: Add hotkeys for "Unstage from commit" and "Revert changes"
git-gui: Makefile: consolidate .FORCE-* targets
Merge branch 'maint' of git://git.spearce.org/git-gui into maint
* 'maint' of git://git.spearce.org/git-gui:
git-gui: work from the .git dir
git-gui: Fix applying a line when all following lines are deletions
git-gui: Correct file_states when unstaging partly staged entry
git-gui: Fix gitk for branch whose name matches local file
git-gui: Keep repo_config(gui.recentrepos) and .gitconfig in sync
git-gui: handle really long error messages in updateindex.
git-gui: Add hotkeys for "Unstage from commit" and "Revert changes"
git-gui: Makefile: consolidate .FORCE-* targets
Commit 44626dc7 (MSVC: Windows-native implementation for subset
of threads API, 2010-01-15) introduces builtin replacement of
pthreadGC2.dll functionality, thus we can completely drop
dependency on this dll.
Signed-off-by: Michael Lukashov <michael.lukashov@gmail.com> Acked-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>