v2.19.0-rc0~165^2~1 (submodule: ensure core.worktree is set after
update, 2018-06-18) assumes an "absorbed" submodule layout, where the
submodule's Git directory is in the superproject's .git/modules/
directory and .git in the submodule worktree is a .git file pointing
there. In particular, it uses $GIT_DIR/modules/$name to find the
submodule to find out whether it already has core.worktree set, and it
uses connect_work_tree_and_git_dir if not, resulting in
fatal: could not open sub/.git for writing
The context behind that patch: v2.19.0-rc0~165^2~2 (submodule: unset
core.worktree if no working tree is present, 2018-06-12) unsets
core.worktree when running commands like "git checkout
--recurse-submodules" to switch to a branch without the submodule. If
a user then uses "git checkout --no-recurse-submodules" to switch back
to a branch with the submodule and runs "git submodule update", this
patch is needed to ensure that commands using the submodule directly
are aware of the path to the worktree.
It is late in the release cycle, so revert the whole 3-patch series.
We can try again later for 2.20.
Reported-by: Allan Sandfeld Jensen <allan.jensen@qt.io> Helped-by: Stefan Beller <sbeller@google.com> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
According to RFC3875, empty environment variable is equivalent to unset,
and for CONTENT_LENGTH it should mean zero body to read.
However, unset CONTENT_LENGTH is also used for chunked encoding to indicate
reading until EOF. At least, the test "large fetch-pack requests can be split
across POSTs" from t5551 starts faliing, if unset or empty CONTENT_LENGTH is
treated as zero length body. So keep the existing behavior as much as possible.
Add a test for the case.
Reported-By: Jelmer Vernooij <jelmer@jelmer.uk> Signed-off-by: Max Kirillov <max@max630.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
"cette" can be only be used before a word (like in "cette bouteille" for
"this bottle"), but here "this" refers to the current step and we have
to use "ceci" in French.
We provide a reopen_tempfile() function, which is in turn
used by reopen_lockfile(). The idea is that a caller may
want to rewrite the tempfile without letting go of the lock.
And that's what our one caller does: after running
add--interactive, "commit -p" will update the cache-tree
extension of the index and write out the result, all while
holding the lock.
However, because we open the file with only the O_WRONLY
flag, the existing index content is left in place, and we
overwrite it starting at position 0. If the new index after
updating the cache-tree is smaller than the original, those
final bytes are not overwritten and remain in the file. This
results in a corrupt index, since those cruft bytes are
interpreted as part of the trailing hash (or even as an
extension, if there are enough bytes).
This bug actually pre-dates reopen_tempfile(); the original
code from 9c4d6c0297 (cache-tree: Write updated cache-tree
after commit, 2014-07-13) has the same bug, and those lines
were eventually refactored into the tempfile module. Nobody
noticed until now for two reasons:
- the bug can only be triggered in interactive mode
("commit -p" or "commit -i")
- the size of the index must shrink after updating the
cache-tree, which implies a non-trivial deletion. Notice
that the included test actually has to create a 2-deep
hierarchy. A single level is not enough to actually cause
shrinkage.
The fix is to truncate the file before writing out the
second index. We can do that at the caller by using
ftruncate(). But we shouldn't have to do that. There is no
other place in Git where we want to open a file and
overwrite bytes, making reopen_tempfile() a confusing and
error-prone interface. Let's pass O_TRUNC there, which gives
callers the same state they had after initially opening the
file or lock.
It's possible that we could later add a caller that wants
something else (e.g., to open with O_APPEND). But this is
the only caller we've had in the history of the codebase.
Let's punt on doing anything more clever until another one
comes along.
Reported-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ab/portable-more:
tests: fix non-portable iconv invocation
tests: fix non-portable "${var:-"str"}" construct
tests: fix and add lint for non-portable grep --file
tests: fix version-specific portability issue in Perl JSON
tests: use shorter labels in chainlint.sed for AIX sed
tests: fix comment syntax in chainlint.sed for AIX sed
tests: fix and add lint for non-portable seq
tests: fix and add lint for non-portable head -c N
Recent addition of "directory rename" heuristics to the
merge-recursive backend makes the command susceptible to false
positives and false negatives. In the context of "git am -3",
which does not know about surrounding unmodified paths and thus
cannot inform the merge machinery about the full trees involved,
this risk is particularly severe. As such, the heuristic is
disabled for "git am -3" to keep the machinery "more stupid but
predictable".
* en/directory-renames-nothanks:
am: avoid directory rename detection when calling recursive merge machinery
merge-recursive: add ability to turn off directory rename detection
t3401: add another directory rename testcase for rebase and am
Documentation/git.txt: clarify that GIT_TRACE=/path appends
The current wording of the description of GIT_TRACE=/path/to/file
("... will try to write the trace messages into it") might be
misunderstood as "overwriting"; at least I interpreted it that way on
a cursory first read.
State it more explicitly that the trace messages are appended.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
rebase -i: be careful to wrap up fixup/squash chains
When an interactive rebase was stopped at the end of a fixup/squash
chain, the user might have edited the commit manually before continuing
(with either `git rebase --skip` or `git rebase --continue`, it does not
really matter which).
We need to be very careful to wrap up the fixup/squash chain also in
this scenario: otherwise the next fixup/squash chain would try to pick
up where the previous one was left.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
rebase -i --autosquash: demonstrate a problem skipping the last squash
The `git commit --squash` command can be used not only to amend commit
messages and changes, but also to record notes for an upcoming rebase.
For example, when the author information of a given commit is incorrect,
a user might call `git commit --allow-empty -m "Fix author" --squash
<commit>`, to remind them to fix that during the rebase. When the editor
would pop up, the user would simply delete the commit message to abort
the rebase at this stage, fix the author information, and continue with
`git rebase --skip`. (This is a real-world example from the rebase of
Git for Windows onto v2.19.0-rc1.)
However, there is a bug in `git rebase` that will cause the squash
message *not* to be forgotten in this case. It will therefore be reused
in the next fixup/squash chain (if any).
This patch adds a test case to demonstrate this breakage.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
OLD_ICONV has long been needed by FreeBSD so config.mak.uname defines
it unconditionally. However, recent versions do not need it, and its
presence results in compilation warnings. Resolve this issue by defining
OLD_ICONV only for older FreeBSD versions.
Specifically, revision r281550[1], which is part of FreeBSD 11, removed
the need for OLD_ICONV, and r282275[2] back-ported that change to 10.2.
Versions prior to 10.2 do need it.
[es: commit message; tweak version check to distinguish 10.x versions]
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Eric Sunshine <sunshine@sunshineco.com> Reviewed-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
commit: don't use generation numbers if not needed
In 3afc679b "commit: use generations in paint_down_to_common()",
the queue in paint_down_to_common() was changed to use a priority
order based on generation number before commit date. This served
two purposes:
1. When generation numbers are present, the walk guarantees
correct topological relationships, regardless of clock skew in
commit dates.
2. It enables short-circuiting the walk when the min_generation
parameter is added in d7c1ec3e "commit: add short-circuit to
paint_down_to_common()". This short-circuit helps commands
like 'git branch --contains' from needing to walk to a merge
base when we know the result is false.
The commit message for 3afc679b includes the following sentence:
This change does not affect the number of commits that are
walked during the execution of paint_down_to_common(), only
the order that those commits are inspected.
This statement is incorrect. Because it changes the order in which
the commits are inspected, it changes the order they are added to
the queue, and hence can change the number of loops before the
queue_has_nonstale() method returns true.
This change makes a concrete difference depending on the topology
of the commit graph. For instance, computing the merge-base between
consecutive versions of the Linux kernel has no effect for versions
after v4.9, but 'git merge-base v4.8 v4.9' presents a performance
regression:
v2.18.0: 0.122s
v2.19.0-rc1: 0.547s
HEAD: 0.127s
To determine that this was simply an ordering issue, I inserted
a counter within the while loop of paint_down_to_common() and
found that the loop runs 167,468 times in v2.18.0 and 635,579
times in v2.19.0-rc1.
The topology of this case can be described in a simplified way
here:
v4.9
| \
| \
v4.8 \
| \ \
| \ |
... A B
| / /
| / /
|/__/
C
Here, the "..." means "a very long line of commits". By generation
number, A and B have generation one more than C. However, A and B
have commit date higher than most of the commits reachable from
v4.8. When the walk reaches v4.8, we realize that it has PARENT1
and PARENT2 flags, so everything it can reach is marked as STALE,
including A. B has only the PARENT1 flag, so is not STALE.
When paint_down_to_common() is run using
compare_commits_by_commit_date, A and B are removed from the queue
early and C is inserted into the queue. At this point, C and the
rest of the queue entries are marked as STALE. The loop then
terminates.
When paint_down_to_common() is run using
compare_commits_by_gen_then_commit_date, B is removed from the
queue only after the many commits reachable from v4.8 are explored.
This causes the loop to run longer. The reason for this regression
is simple: the queue order is intended to not explore a commit
until everything that _could_ reach that commit is explored. From
the information gathered by the original ordering, we have no
guarantee that there is not a commit D reachable from v4.8 that
can also reach B. We gained absolute correctness in exchange for
a performance regression.
The performance regression is probably the worse option, since
these incorrect results in paint_down_to_common() are rare. The
topology required for the performance regression are less rare,
but still require multiple merge commits where the parents differ
greatly in generation number. In our example above, the commit A
is as important as the commit B to demonstrate the problem, since
otherwise the commit C will sit in the queue as non-stale just as
long in both orders.
The solution provided uses the min_generation parameter to decide
if we should use generation numbers in our ordering. When
min_generation is equal to zero, it means that the caller has no
known cutoff for the walk, so we should rely on our commit-date
heuristic as before; this is the case with merge_bases_many().
When min_generation is non-zero, then the caller knows a valuable
cutoff for the short-circuit mechanism; this is the case with
remove_redundant() and in_merge_bases_many().
Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using git-am (or am-based rebase) to apply the changes from branch onto
master results in the following tree:
Result: bar_merged, goo/{file1, file2, file3}
This is not what users want; they did not rename foo/ -> goo/, they only
renamed one file within that directory. The reason this happens is am
constructs fake trees (via build_fake_ancestor()) of the following form:
You can see that merge_recursive_generic() would see branch_bfa as renaming
foo/ -> goo/, and master as just adding both foo/file1 and foo/file2. As
such, it ends up with goo/{file1, file2, file3}
The core problem is that am does not have access to the original trees; it
can only construct trees using the blobs involved in the patch. As such,
it is not safe to perform directory rename detection within am -3.
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t3401: add another directory rename testcase for rebase and am
Similar to commit 16346883ab ("t3401: add directory rename testcases for
rebase and am", 2018-06-27), add another testcase for directory rename
detection. This new testcase differs in that it showcases a situation
where no directory rename was performed, but which some backends
incorrectly detect.
As with the other testcase, run this in conjunction with each of the
types of rebases:
git-rebase--interactive
git-rebase--am
git-rebase--merge
and also use the same testcase for
git am --3way
Reported-by: Nikolay Kasyanov <corrmage@gmail.com> Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
.gitattributes: add conflict-marker-size for relevant files
Some files in git.git contain lines that look like conflict markers,
either in examples or tests, or in the case of Documentation/gitk.txt
because of the asciidoc heading.
Having conflict markers the same length as the actual content can be
confusing for humans, and is impossible to handle for tools like 'git
rerere'. Work around that by setting the 'conflict-marker-size'
attribute for those files to 32, which makes the conflict markers
unambiguous.
Helped-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
A here-doc tag can be quoted ('EOF'/"EOF") or escaped (\EOF) to suppress
interpolation within the body. chainlint recognizes single-quoted and
escaped tags, but does not know about double-quoted tags. For
completeness, teach it to recognize double-quoted tags, as well.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The iconv that comes with a FreeBSD 11.2-RELEASE-p2 box I have access
to doesn't support the SHIFT-JIS encoding. Guard a test added in e92d62253 ("convert: add round trip check based on
'core.checkRoundtripEncoding'", 2018-04-15) first released with Git
v2.18.0 with a prerequisite that checks for its availability.
The iconv command is in POSIX, and we have numerous tests
unconditionally relying on its ability to convert ASCII, UTF-8 and
UTF-16, but unconditionally relying on the presence of more obscure
encodings isn't portable.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Reviewed-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
On both AIX 7200-00-01-1543 and FreeBSD 11.2-RELEASE-p2 the
"${var:-"str"}" syntax means something different than what it does
under the bash or dash shells.
Both will consider the start of the new unescaped quotes to be a new
argument to test_expect_success, resulting in the following error:
error: bug in the test script: 'git diff-tree initial # magic
is (not' does not look like a prereq
Fix this by removing the redundant quotes. There's no need for them,
and the resulting code works under all the aforementioned shells. This
fixes a regression in c2f1d3989 ("t4013: test new output from diff
--abbrev --raw", 2017-12-03) first released with Git v2.16.0.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Partially revert the support for multiple hash functions to regain
hash comparison performance; we'd think of a way to do this better
in the next cycle.
* sg/test-must-be-empty:
tests: use 'test_must_be_empty' instead of 'test_cmp <empty> <out>'
tests: use 'test_must_be_empty' instead of 'test_cmp /dev/null <out>'
tests: use 'test_must_be_empty' instead of 'test ! -s'
tests: use 'test_must_be_empty' instead of '! test -s'
* rs/opt-updates:
parseopt: group literal string alternatives in argument help
remote: improve argument help for add --mirror
checkout-index: improve argument help for --stage
"git help --config" (which is used in command line completion)
missed the configuration variables not described in the main
config.txt file but are described in another file that is included
by it, which has been corrected.
* nd/complete-config-vars:
generate-cmdlist.sh: collect config from all config.txt files
"git branch --list" learned to take the default sort order from the
'branch.sort' configuration variable, just like "git tag --list"
pays attention to 'tag.sort'.
* sm/branch-sort-config:
branch: support configuring --sort via .gitconfig
tests: fix and add lint for non-portable grep --file
The --file option to grep isn't in POSIX[1], but -f is[1]. Let's check
for that in the future, and fix the portability regression in f237c8b6fe ("commit-graph: implement git-commit-graph write",
2018-04-02) that broke e.g. AIX.
tests: fix version-specific portability issue in Perl JSON
The test guarded by PERLJSON added in 75459410ed ("json_writer: new
routines to create JSON data", 2018-07-13) assumed that a JSON boolean
value like "true" or "false" would be represented as "1" or "0" in
Perl.
This behavior can't be relied upon, e.g. with JSON.pm 2.50 and
JSON::PP. A JSON::PP::Boolean object will be represented as "true"
or "false". To work around this let's check if we have any refs left
after we check for hashes and arrays, assume those are JSON objects,
and coerce them to a known boolean value.
The behavior of this test still looks odd to me. Why implement our own
ad-hoc encoder just for some one-off test, as opposed to say Perl's
own Data::Dumper with Sortkeys et al? But with this change it works,
so let's leave it be.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
tests: use shorter labels in chainlint.sed for AIX sed
Improve the portability of chainlint by using shorter labels. On
AIX sed will complain about:
sed: 0602-417 The label :hereslurp is greater than eight
characters
This, in combination with the previous fix to this file makes
GIT_TEST_CHAIN_LINT=1 (which is the default) working again on AIX
without issues, and the "gmake check-chainlint" test also passes.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Acked-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
range-diff: update stale summary of --no-dual-color
275267937b (range-diff: make dual-color the default mode, 2018-08-13)
replaced --dual-color with --no-dual-color but left the option's
summary untouched. Rewrite the summary to describe --no-dual-color
rather than dual-color.
Helped-by: Jonathan Nieder <jrnieder@gmail.com> Helped-by: Johannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: Kyle Meyer <kyle@kyleam.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Acked-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The seq command is not in POSIX, and doesn't exist on
e.g. OpenBSD. We've had the test_seq wrapper since d17cf5f3a3 ("tests:
Introduce test_seq", 2012-08-04), but use of it keeps coming back,
e.g. in the recently added "fetch negotiator" tests being added here.
So let's also add a check to "make test-lint". The regex is aiming to
capture the likes of $(seq ..) and "seq" as a stand-alone command,
without capturing some existing cases where we e.g. have files called
"seq", as \bseq\b would do.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
tests: fix and add lint for non-portable head -c N
The "head -c BYTES" option is non-portable (not in POSIX[1]). Change
such invocations to use the test_copy_bytes wrapper added in 48860819e8 ("t9300: factor out portable "head -c" replacement",
2016-06-30).
This fixes a test added in 9d2e330b17 ("ewah_read_mmap: bounds-check
mmap reads", 2018-06-14), which has been breaking
t5310-pack-bitmaps.sh on OpenBSD since 2.18.0. The OpenBSD ports
already have a similar workaround after their upgrade to 2.18.0[2].
I have not tested this on IRIX, but according to 4de0bbd898 ("t9300:
use perl "head -c" clone in place of "dd bs=1 count=16000" kluge",
2010-12-13) this invocation would have broken things there too.
Also, change a valgrind-specific codepath in test-lib.sh to use this
wrapper. Given where valgrind runs I don't think this would ever
become a portability issue in practice, but it's easier to just use
the wrapper than introduce some exception for the "make test-lint"
check being added here.
The core.commitGraph config setting was accidentally removed from
the config documentation. In that same patch, the config setting
that writes a commit-graph during garbage collection was incorrectly
written to the doc as "gc.commitGraph" instead of "gc.writeCommitGraph".
Reported-by: Szeder Gábor <szeder.dev@gmail.com> Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The append_signoff() function takes an "int" to specify the
number of bytes to ignore. Most callers just pass 0, and the
remainder use ignore_non_trailer() to skip over cruft.
That function also returns an int, and uses them internally.
On systems where size_t is larger than an int (i.e., most
64-bit systems), dealing with a ridiculously large commit
message could end up overflowing an int, producing
surprising results (e.g., returning a negative offset, which
would cause us to look outside the original string).
Let's consistently use size_t for these offsets through this
whole stack. As a bonus, this makes the meaning of
"ignore_footer" as an offset (and not a boolean) more clear.
But while we're here, let's also document the interface.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
sequencer: ignore "---" divider when parsing trailers
When the sequencer code appends a signoff or cherry-pick
origin, it uses the default trailer-parsing options, which
treat "---" as the end of the commit message. As a result,
it may be fooled by a commit message that contains that
string and fail to find the existing trailer block. Even
more confusing, the actual append code does not know about
"---", and always appends to the end of the string. This can
lead to bizarre results. E.g., appending a signoff to a
commit message like this:
subject
body
---
these dashes confuse the parser!
Signed-off-by: A
results in output with a final block like:
Signed-off-by: A Signed-off-by: A
The parser thinks the final line of the message is "body",
and ignores everything else, claiming there are no trailers.
So we output an extra newline separator (wrong) and add a
duplicate signoff (also wrong).
Since we know we are feeding a pure commit message, we can
simply tell the parser to ignore the "---" divider.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
pretty, ref-filter: format %(trailers) with no_divider option
In both of these cases we know that we are feeding the
trailer-parsing code a pure commit message. We should tell
it so, which avoids false positives for a commit message
that contains a "---" line.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Even with the newly-tightened "---" parser, it's still
possible for a commit message to trigger a false positive if
it contains something like "--- foo". If the caller knows
that it has only a single commit message, it can now tell us
with the "--no-divider" option, eliminating any false
positives.
If we were designing this from scratch, I'd probably make
this the default. But we've advertised the "---" behavior in
the documentation since interpret-trailers has existed.
Since it's meant to be scripted, breaking that would be a
bad idea.
Note that the logic is in the underlying trailer.c code,
which is used elsewhere. The default there will keep the
current behavior, but many callers will benefit from setting
this new option. That's left for future patches.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
interpret-trailers: tighten check for "---" patch boundary
The interpret-trailers command accepts not only raw commit
messages, but it also can manipulate trailers in
format-patch output. That means it must find the "---"
boundary separating the commit message from the patch.
However, it does so by looking for any line starting with
"---", regardless of whether there is further content.
This is overly lax compared to the parsing done in
mailinfo.c's patchbreak(), and may cause false positives
(e.g., t/perf output tables uses dashes; if you cut and
paste them into your commit message, it fools the parser).
We could try to reuse patchbreak() here, but it actually has
several heuristics that are not of interest to us (e.g.,
matching "diff -" without a three-dash separator or even a
CVS "Index:" line). We're not interested in taking in
whatever random cruft people may send, but rather handling
git-formatted patches.
Note that the existing documentation was written in a loose
way, so technically we are changing the behavior from what
it said. But this should implement the original intent in a
more accurate way.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
trailer: pass process_trailer_opts to trailer_info_get()
Most of the trailer code has an "opts" struct which is
filled in by the caller. We don't pass it down to
trailer_info_get(), which does the initial parsing, because
there hasn't yet been a need to do so.
Let's start passing it down in preparation for adding new
options. Note that there's a single caller which doesn't
otherwise have such an options struct. Since it's just one
caller (that we'd have to modify anyway), let's not bother
with any special treatment like accepting a NULL options
struct, and just have it allocate one with the defaults.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
We store the length of the trailers list in a size_t. So on
a 64-bit system with a 32-bit int, in the unlikely case that
we manage to actually allocate a list with 2^31 entries,
we'd loop forever trying to iterate over it (our "int" would
wrap to negative before exceeding info->trailer_nr).
This probably doesn't matter in practice. Each entry is at
least a pointer plus a non-empty string, so even without
malloc overhead or the memory to hold the original string
we're parsing from, you'd need to allocate tens of
gigabytes. But it's easy enough to do it right.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many of the string-parsing functions inside trailer.c return
integer offsets into the string (e.g., to point to the end
of the trailer block). Several of these use an "int" to
return or store the offsets. On a system where "size_t" is
much larger than "int" (e.g., most 64-bit ones), it's easy
to feed a gigantic commit message that results in a negative
offset. This can result in us reading memory before the
string (if the int is used as an index) or far after (if
it's implicitly cast to a size_t by passing to a strbuf
function).
Let's fix this by using size_t for all string offsets. Note
that several of the functions need ssize_t, since they use
"-1" as a sentinel value. The interactions here can be
pretty subtle. E.g., end_of_title in find_trailer_start()
does not itself need to be signed, but it is compared to the
result of last_line(), which is. That promotes the latter to
unsigned, and the ">=" does not behave as you might expect.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t/lib-rebase.sh: support explicit 'pick' commands in 'fake_editor.sh'
The verbose output of the test 'reword without issues functions as
intended' in 't3423-rebase-reword.sh', added in a9279c6785 (sequencer:
do not squash 'reword' commits when we hit conflicts, 2018-06-19),
contains the following error output:
sed: -e expression #1, char 2: extra characters after command
This error comes from within the 'fake-editor.sh' script created by
'lib-rebase.sh's set_fake_editor() function, and the root cause is the
FAKE_LINES="pick 1 reword 2" variable in the test in question, in
particular the "pick" word. 'fake-editor.sh' assumes 'pick' to be the
default rebase command and doesn't support an explicit 'pick' command
in FAKE_LINES. As a result, 'pick' will be used instead of a line
number when assembling the following 'sed' script:
sed -n picks/^pick/pick/p
which triggers the aforementioned error.
Luckily, this didn't affect the test's correctness: the erroring 'sed'
command doesn't write anything to the todo script, and processing the
rest of FAKE_LINES generates the desired todo script, as if that
'pick' command were not there at all.
The minimal fix would be to remove the 'pick' word from FAKE_LINES,
but that would leave us susceptible to similar issues in the future.
Instead, teach the fake-editor script to recognize an explicit 'pick'
command, which is still a fairly trivial change.
In the future we might want to consider reinforcing this fake editor
script with an &&-chain and stricter parsing of the FAKE_LINES
variable (e.g. to error out when encountering unknown rebase commands
or commands and line numbers in the wrong order).
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Prior to 509f6f62a4 (cache: update object ID functions for
the_hash_algo, 2018-07-16), hashcmp() called memcmp() with a
constant size of 20 bytes. Some compilers were able to turn
that into a few quad-word comparisons, which is faster than
actually calling memcmp().
In 509f6f62a4, we started using the_hash_algo->rawsz
instead. Even though this will always be 20, the compiler
doesn't know that while inlining hashcmp() and ends up just
generating a call to memcmp().
Eventually we'll have to deal with multiple hash sizes, but
for the upcoming v2.19, we can restore some of the original
performance by asserting on the size. That gives the
compiler enough information to know that the memcmp will
always be called with a length of 20, and it performs the
same optimization.
Here are numbers for p0001.2 run against linux.git on a few
versions. This is using -O2 with gcc 8.2.0.
Test v2.18.0 v2.19.0-rc0 HEAD
------------------------------------------------------------------------------
0001.2: 34.24(33.81+0.43) 34.83(34.42+0.40) +1.7% 33.90(33.47+0.42) -1.0%
You can see that v2.19 is a little slower than v2.18. This
commit ended up slightly faster than v2.18, but there's a
fair bit of run-to-run noise (the generated code in the two
cases is basically the same). This patch does seem to be
consistently 1-2% faster than v2.19.
I tried changing hashcpy(), which was also touched by 509f6f62a4, in the same way, but couldn't measure any
speedup. Which makes sense, at least for this workload. A
traversal of the whole commit graph requires looking up
every entry of every tree via lookup_object(). That's many
multiples of the numbers of objects in the repository (most
of the lookups just return "yes, we already saw that
object").
[jn: verified using "make object.s" that the memcmp call goes away.]
Reported-by: Derrick Stolee <stolee@gmail.com> Signed-off-by: Jeff King <peff@peff.net Reviewed-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t3420-rebase-autostash: don't try to grep non-existing files
Several tests in 't3420-rebase-autostash.sh' start various rebase
processes that are expected to fail because of merge conflicts. These
tests then run '! grep' to ensure that the autostash feature did its
job, and the dirty contents of a file is gone. However, due to the
test repo's history and the choice of upstream branch that file
shouldn't exist in the conflicted state at all. Consequently, this
'grep' doesn't fail as expected, because it can't find the dirty
content, but it fails because it can't open the file.
Tighten this check by using 'test_path_is_missing' instead, thereby
avoiding unexpected errors from 'grep' as well.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test 'store updates stash ref and reflog' in 't3903-stash.sh'
creates a stash from a new file, runs 'git reset --hard' to throw away
any modifications to the work tree, and then runs '! grep' to ensure
that the staged contents are gone. Since the file didn't exist
before, it shouldn't exist after 'git reset' either. Consequently,
this 'grep' doesn't fail as expected, because it can't find the staged
content, but it fails because it can't open the file.
Tighten this check by using 'test_path_is_missing' instead, thereby
avoiding an unexpected error from 'grep' as well.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Prior to d3c6751b18 (tests: make use of the test_must_be_empty
function, 2018-07-27), in the test 'rev-list should succeed with empty
output on empty stdin' in 't6018-rev-list-glob' the empty 'expect'
file served dual purpose: besides specifying the expected output, as
usual, it also served as empty input for 'git rev-list --stdin'.
Then d3c6751b18 came along, and, as part of the conversion to
'test_must_be_empty', removed this empty 'expect' file, not realizing
its secondary purpose. Redirecting stdin from the now non-existing
file failed the test, but since this test expects failure in the first
place, this issue went unnoticed.
Redirect 'git rev-list's stdin explicitly from /dev/null to provide
empty input. (Strictly speaking we don't need this redirection,
because the test script's stdin is already redirected from /dev/null
anyway, but I think it's better to be explicit about it.)
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test ' context does not include preceding empty lines' in the
block of tests 'change with long common tail and no context' in
't4051-diff-function-context.sh' tries to read the file
'long_common_tail.diff.diff', but that file doesn't exist as its name
contains one more '.diff' suffixes than necessary.
Despite this error the test still succeeded without checking what it's
supposed to, because this erroneous read is done on the line:
test "$(first_context_line <long_common_tail.diff.diff)" != " "
which means that:
- the command substitution hides the error, so it won't fail the
test, and
- the result of the command substitution is the empty string, which
is, of course, not equal to a single space character, so the
condition is fulfilled, and the test succeeds.
As a minimal fix, fix the name of the file to be read.
In the future we might want to reorganize this test script (1) to use
'test_cmp' instead of 'test's and command substitutions to catch
failing commands and to provide helpful error messages, and (2) to
specify what the expected result actually _is_ instead of what it
isn't.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the test 'checkout with autocrlf=input' in 't0020-crlf.sh', one of
the 'has_cr' checks looks at the non-existing file 'two' instead of
'dir/two'. The test still succeeds, without actually checking what it
was supposed to, because this check is expected to fail anyway.
As a minimal fix, fix the name of the file to be checked.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test '--dry-run with conflicts fixed from a merge' in
't7501-commit.sh', added in 8dc874b2ee (wt-status.c: set commitable
bit if there is a meaningful merge., 2016-02-15), runs the following
unnecessary and downright bogus command substitution:
! $(git merge --no-commit commit-1) &&
I.e. after 'git merge ...' is executed and expectedly fails, the test
attempts to execute its output:
Merging: 80f2ea2 commit 2
virtual commit-1
found 1 common ancestor: e60d113 Initial commit
Auto-merging test-file
CONFLICT (content): Merge conflict in test-file
Automatic merge failed; fix conflicts and then commit the result.
as a command, which most likely fails, because there is no such
command as "Merging:". Then '!' negates the failed exit status, the
test continues, and eventually succeeds.
Remove this command substitution and use 'test_must_fail' to ensure
that 'git merge' fails.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The author_date_slab is used to store the author date of a commit
when walking with the --author-date flag in rev-list or log. This
was added as an 'unsigned long' in
Since 'unsigned long' is ambiguous in its bit-ness across platforms
(64-bit in Linux, 32-bit in Windows, for example), most references
to the author dates in commit.c were converted to timestamp_t in
dddbad72 "timestamp_t: a new data type for timestamps"
However, the slab definition was missed, leading to a mismatch in
the data types in Windows. This would not reveal itself as a bug
unless someone authors a commit after February 2106, but commits
can store anything as their author date.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test-tool programs include "test-tool.h" as their first
include, which breaks our CodingGuideline of "the first
include must be git-compat-util.h or an equivalent".
Rather than change them all, let's instead make test-tool.h
one of those equivalents, just like we do for builtin.h
(which many of the actual git builtins include first).
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
tests: use 'test_must_be_empty' instead of 'test_cmp <empty> <out>'
Using 'test_must_be_empty' is shorter and more idiomatic than
>empty &&
test_cmp empty out
as it saves the creation of an empty file. Furthermore, sometimes the
expected empty file doesn't have such a descriptive name like 'empty',
and its creation is far away from the place where it's finally used
for comparison (e.g. in 't7600-merge.sh', where two expected empty
files are created in the 'setup' test, but are used only about 500
lines later).
These cases were found by instrumenting 'test_cmp' to error out the
test script when it's used to compare empty files, and then converted
manually.
Note that even after this patch there still remain a lot of cases
where we use 'test_cmp' to check empty files:
- Sometimes the expected output is not hard-coded in the test, but
'test_cmp' is used to ensure that two similar git commands produce
the same output, and that output happens to be empty, e.g. the
test 'submodule update --merge - ignores --merge for new
submodules' in 't7406-submodule-update.sh'.
- Repetitive common tasks, including preparing the expected results
and running 'test_cmp', are often extracted into a helper
function, and some of this helper's callsites expect no output.
- For the same reason as above, the whole 'test_expect_success'
block is within a helper function, e.g. in 't3070-wildmatch.sh'.
- Or 'test_cmp' is invoked in a loop, e.g. the test 'cvs update
(-p)' in 't9400-git-cvsserver-server.sh'.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
tests: use 'test_must_be_empty' instead of 'test ! -s'
Using 'test_must_be_empty' is preferable to 'test ! -s', because it
gives a helpful error message if the given file is unexpectedly no
empty, while the latter remains completely silent. Furthermore, it
also catches cases when the given file unexpectedly does not exist at
all.
This patch was created by:
sed -i -e 's/test ! -s/test_must_be_empty/' t[0-9]*.sh
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
tests: use 'test_must_be_empty' instead of '! test -s'
Using 'test_must_be_empty' is preferable to '! test -s', because it
gives a helpful error message if the given file is unexpectedly not
empty, while the latter remains completely silent. Furthermore, it
also catches cases when the given file unexpectedly does not exist at
all.
This patch was basically created by:
sed -i -e 's/! test -s/test_must_be_empty/' t[0-9]*.sh
with the following notable exceptions:
- The '! test -s' check in '.gitmodules ignore=dirty suppresses
submodules with untracked content' in 't7508-status.sh' is left
as-is, because it's bogus and, therefore, it's subject of a
dedicated patch.
- The '! test -s' checks in 't9131-git-svn-empty-symlink.sh' and
't9135-git-svn-moved-branch-empty-file.sh' are immediately
preceeded by a 'test -f' to ensure that the files exist in the
first place. 'test_must_be_empty' ensures that as well, so those
'test -f' commands are removed as well.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Group the possible values using a pair of parentheses and don't mark
them for translation, as they are literal strings that have to be used
as-is in any locale.
Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Spell out all alternatives and avoid using a numerical range operator,
as it is not mentioned in CodingGuidelines and the resulting string is
still concise. Wrap them in parentheses to document clearly that the
"--stage=" part is common among them.
Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
generate-cmdlist.sh: collect config from all config.txt files
This script uses Documentation/config.txt as input for "git help
--config" and "git config" completion but it misses the fact that
config.txt includes other txt files. Include all *config.txt as input
when scanning for config keys. This could produce false positives, but
as long as we stick to the blah-config.txt naming convention, we
should be ok.
While at there, move diff.* from config.txt to diff-config.txt where
all other diff config keys are.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
commit-graph: close_commit_graph before shallow walk
Call close_commit_graph() when about to start a rev-list walk that
includes shallow commits. This is necessary in code paths that "fake"
shallow commits for the sake of fetch. Specifically, test 351 in
t5500-fetch-pack.sh runs
git fetch --shallow-exclude one origin
with a file-based transfer. When the "remote" has a commit-graph, we do
not prevent the commit-graph from being loaded, but then the commits are
intended to be dynamically transferred into shallow commits during
get_shallow_commits_by_rev_list(). By closing the commit-graph before
this call, we prevent this interaction.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Augment commit_graph_compatible(r) to return false when the given
repository r has commit grafts or is a shallow clone. Test that in these
situations we ignore existing commit-graph files and we do not write new
commit-graph files.
Helped-by: Jakub Narebski <jnareb@gmail.com> Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Create new method commit_graph_compatible(r) to check if a given
repository r is compatible with the commit-graph feature. Fill the
method with a check to see if replace-objects exist. Test this
interaction succeeds, including ignoring an existing commit-graph and
failing to write a new commit-graph. However, we do ensure that
we write a new commit-graph by setting read_replace_refs to 0, thereby
ignoring the replace refs.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>