The low-level grep_source code will automatically load the
userdiff driver to see whether a file is binary. However,
when we are threaded, it will load the drivers in a
non-deterministic order, handling each one as its assigned
thread happens to be scheduled.
Meanwhile, the attribute lookup code (which underlies the
userdiff driver lookup) is optimized to handle paths in
sequential order (because they tend to share the same
gitattributes files). Multi-threading the lookups destroys
the locality and makes this optimization less effective.
We can fix this by pre-loading the userdiff driver in the
main thread, before we hand off the file to a worker thread.
My best-of-five for "git grep foo" on the linux-2.6
repository went from:
real 0m0.391s
user 0m1.708s
sys 0m0.584s
to:
real 0m0.360s
user 0m1.576s
sys 0m0.572s
Not a huge speedup, but it's quite easy to do. The only
trick is that we shouldn't perform this optimization if "-a"
was used, in which case we won't bother checking whether
the files are binary at all.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Usually we load each file to grep into memory, check whether
it's binary, and then either grep it (the default) or not
(if "-I" was given).
In the "-I" case, we can skip loading the file entirely if
it is marked as binary via gitattributes. On my giant
3-gigabyte media repository, doing "git grep -I foo" went
from:
real 0m0.712s
user 0m0.044s
sys 0m4.780s
to:
real 0m0.026s
user 0m0.016s
sys 0m0.020s
Obviously this is an extreme example. The repo is almost
entirely binary files, and you can see that we spent all of
our time asking the kernel to read() the data. However, with
a cold disk cache, even avoiding a few binary files can have
an impact.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is currently no way for users to tell git-grep that a
particular path is or is not a binary file; instead, grep
always relies on its auto-detection (or the user specifying
"-a" to treat all binary-looking files like text).
This patch teaches git-grep to use the same attribute lookup
that is used by git-diff. We could add a new "grep" flag,
but that is unnecessarily complex and unlikely to be useful.
Despite the name, the "-diff" attribute (or "diff=foo" and
the associated diff.foo.binary config option) are really
about describing the contents of the path. It's simply
historical that diff was the only thing that cared about
these attributes in the past.
And if this simple approach turns out to be insufficient, we
still have a backwards-compatible path forward: we can add a
separate "grep" attribute, and fall back to respecting
"diff" if it is unset.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Right now, grep only uses the userdiff_driver for one thing:
looking up funcname patterns for "-p" and "-W". As new uses
for userdiff drivers are added to the grep code, we want to
minimize attribute lookups, which can be expensive.
It might seem at first that this would also optimize multiple
lookups when the funcname pattern for a file is needed
multiple times. However, the compiled funcname pattern is
already cached in struct grep_opt's "priv" member, so
multiple lookups are already suppressed.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before the grep_source interface existed, grep_buffer was
used by two types of callers:
1. Ones which pulled a file into a buffer, and then wanted
to supply the file's name for the output (i.e.,
git grep).
2. Ones which really just wanted to grep a buffer (i.e.,
git log --grep).
Callers in set (1) should now be using grep_source. Callers
in set (2) always pass NULL for the "name" parameter of
grep_buffer. We can therefore get rid of this now-useless
parameter.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The grep_source interface (as opposed to grep_buffer) will
eventually gives us a richer interface for telling the
low-level grep code about our buffers. Eventually this will
lead to things like better binary-file handling. For now, it
lets us drop a lot of now-redundant code.
The conversion is mostly straight-forward. One thing to note
is that the memory ownership rules for "struct grep_source"
are different than the "struct work_item" found here (the
former will copy things like the filename, rather than
taking ownership). Therefore you will also see some slight
tweaking of when filename buffers are released.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
grep: refactor the concept of "grep source" into an object
The main interface to the low-level grep code is
grep_buffer, which takes a pointer to a buffer and a size.
This is convenient and flexible (we use it to grep commit
bodies, files on disk, and blobs by sha1), but it makes it
hard to pass extra information about what we are grepping
(either for correctness, like overriding binary
auto-detection, or for optimizations, like lazily loading
blob contents).
Instead, let's encapsulate the idea of a "grep source",
including the buffer, its size, and where the data is coming
from. This is similar to the diff_filespec structure used by
the diff code (unsurprising, since future patches will
implement some of the same optimizations found there).
The diffstat is slightly scarier than the actual patch
content. Most of the modified lines are simply replacing
access to raw variables with their counterparts that are now
in a "struct grep_source". Most of the added lines were
taken from builtin/grep.c, which partially abstracted the
idea of grep sources (for file vs sha1 sources).
Instead of dropping the now-redundant code, this patch
leaves builtin/grep.c using the traditional grep_buffer
interface (which now wraps the grep_source interface). That
makes it easy to test that there is no change of behavior
(yet).
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The multi-threaded git-grep code needs to serialize access
to the thread-unsafe read_sha1_file call. It does this with
a mutex that is local to builtin/grep.c.
Let's instead push this down into grep.c, where it can be
used by both builtin/grep.c and grep.c. This will let us
safely teach the low-level grep.c code tricks that involve
reading from the object db.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The low-level grep code traditionally didn't care about
threading, as it doesn't do any threading itself and didn't
call out to other non-thread-safe code. That changed with 0579f91 (grep: enable threading with -p and -W using lazy
attribute lookup, 2011-12-12), which pushed the lookup of
funcname attributes (which is not thread-safe) into the
low-level grep code.
As a result, the low-level code learned about a new global
"grep_attr_mutex" to serialize access to the attribute code.
A multi-threaded caller (e.g., builtin/grep.c) is expected
to initialize the mutex and set "use_threads" in the
grep_opt structure. The low-level code only uses the lock if
use_threads is set.
However, putting the use_threads flag into the grep_opt
struct is not the most logical place. Whether threading is
in use is not something that matters for each call to
grep_buffer, but is instead global to the whole program
(i.e., if any thread is doing multi-threaded grep, every
other thread, even if it thinks it is doing its own
single-threaded grep, would need to use the locking). In
practice, this distinction isn't a problem for us, because
the only user of multi-threaded grep is "git-grep", which
does nothing except call grep.
This patch turns the opt->use_threads flag into a global
flag. More important than the nit-picking semantic argument
above is that this means that the locking functions don't
need to actually have access to a grep_opt to know whether
to lock. Which in turn can make adding new locks simpler, as
we don't need to pass around a grep_opt.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Recent releases of Redhat/Fedora are reported to ship Perl binary package
with some core modules stripped away (see http://lwn.net/Articles/477234/)
against the upstream Perl5 people's wishes. The Time::HiRes module used by
gitweb one of them.
zsh adds a backslash (foo\ ) for each item in the COMPREPLY array if IFS
doesn't contain spaces. This issue has been reported[1], but there is no
solution yet.
This wasn't a problem due to another bug[2], which was fixed in zsh
version 4.3.12. After this change, 'git checkout ma<tab>' would resolve
to 'git checkout master\ '.
Aditionally, the introduction of __gitcomp_nl in commit a31e626
(completion: optimize refs completion) in git also made the problem
apparent, as Matthieu Moy reported.
The simplest and most generic solution is to hide all the changes we do
to IFS, so that "foo \nbar " is recognized by zsh as "foo bar". This
works on versions of git before and after the introduction of
__gitcomp_nl (a31e626), and versions of zsh before and after 4.3.12.
Once zsh is fixed, we should conditionally disable this workaround to
have the same benefits as bash users.
diff-index: enable recursive pathspec matching in unpack_trees
The pathspec structure has a few bits of data to drive various operation
modes after we unified the pathspec matching logic in various codepaths.
For example, max_depth field is there so that "git grep" can limit the
output for files found in limited depth of tree traversal. Also in order
to show just the surface level differences in "git diff-tree", recursive
field stops us from descending into deeper level of the tree structure
when it is set to false, and this also affects pathspec matching when
we have wildcards in the pathspec.
The diff-index has always wanted the recursive behaviour, and wanted to
match pathspecs without any depth limit. But we forgot to do so when we
updated tree_entry_interesting() logic to unify the pathspec matching
logic.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jk/credentials:
credential-cache: ignore "connection refused" errors
unix-socket: do not let close() or chdir() clobber errno during cleanup
credential-cache: report more daemon connection errors
unix-socket: handle long socket pathnames
The credential-cache helper will try to connect to its
daemon over a unix socket. Originally, a failure to do so
was silently ignored, and we would either give up (if
performing a "get" or "erase" operation), or spawn a new
daemon (for a "store" operation).
But since 8ec6c8d, we try to report more errors. We detect a
missing daemon by checking for ENOENT on our connection
attempt. If the daemon is missing, we continue as before
(giving up or spawning a new daemon). For any other error,
we die and report the problem.
However, checking for ENOENT is not sufficient for a missing
daemon. We might also get ECONNREFUSED if a dead daemon
process left a stale socket. This generally shouldn't
happen, as the daemon cleans up after itself, but the daemon
may not always be given a chance to do so (e.g., power loss,
"kill -9").
The resulting state is annoying not just because the helper
outputs an extra useless message, but because it actually
blocks the helper from spawning a new daemon to replace the
stale socket.
Fix it by checking for ECONNREFUSED.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
diff-index: enable recursive pathspec matching in unpack_trees
The pathspec structure has a few bits of data to drive various operation
modes after we unified the pathspec matching logic in various codepaths.
For example, max_depth field is there so that "git grep" can limit the
output for files found in limited depth of tree traversal. Also in order
to show just the surface level differences in "git diff-tree", recursive
field stops us from descending into deeper level of the tree structure
when it is set to false, and this also affects pathspec matching when
we have wildcards in the pathspec.
The diff-index has always wanted the recursive behaviour, and wanted to
match pathspecs without any depth limit. But we forgot to do so when we
updated tree_entry_interesting() logic to unify the pathspec matching
logic.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Two "^" characters were incorrectly being interpreted as markup for
superscripting. Fix them by writing them as attribute references
"{caret}".
Although a single "^" character in a paragraph cannot be
misinterpreted in this way, also write other "^" characters as
"{caret}" in the interest of good hygiene (unless they are in literal
paragraphs, of course, in which context attribute references are not
recognized).
Spell "{}" consistently, namely *not* quoted as "\{\}". Since the
braces are empty, they cannot be interpreted as an attribute
reference, and either spelling is OK. So arbitrarily choose one
variation and use it consistently.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Update draft release notes to 1.7.8.4
Update draft release notes to 1.7.7.6
Update draft release notes to 1.7.6.6
thin-pack: try harder to use preferred base objects as base
thin-pack: try harder to use preferred base objects as base
When creating a pack using objects that reside in existing packs, we try
to avoid recomputing futile delta between an object (trg) and a candidate
for its base object (src) if they are stored in the same packfile, and trg
is not recorded as a delta already. This heuristics makes sense because it
is likely that we tried to express trg as a delta based on src but it did
not produce a good delta when we created the existing pack.
As the pack heuristics prefer producing delta to remove data, and Linus's
law dictates that the size of a file grows over time, we tend to record
the newest version of the file as inflated, and older ones as delta
against it.
When creating a thin-pack to transfer recent history, it is likely that we
will try to send an object that is recorded in full, as it is newer. But
the heuristics to avoid recomputing futile delta effectively forbids us
from attempting to express such an object as a delta based on another
object. Sending an object in full is often more expensive than sending a
suboptimal delta based on other objects, and it is even more so if we
could use an object we know the receiving end already has (i.e. preferred
base object) as the delta base.
Tweak the recomputation avoidance logic, so that we do not punt on
computing delta against a preferred base object.
The effect of this change can be seen on two simulated upload-pack
workloads. The first is based on 44 reflog entries from my git.git
origin/master reflog, and represents the packs that kernel.org sent me git
updates for the past month or two. The second workload represents much
larger fetches, going from git's v1.0.0 tag to v1.1.0, then v1.1.0 to
v1.2.0, and so on.
The table below shows the average generated pack size and the average CPU
time consumed for each dataset, both before and after the patch:
dataset
| reflog | tags
---------------------------------
before | 53358 | 2750977
size after | 32398 | 2668479
change | -39% | -3%
---------------------------------
before | 0.18 | 1.12
CPU after | 0.18 | 1.15
change | +0% | +3%
This patch makes a much bigger difference for packs with a shorter slice
of history (since its effect is seen at the boundaries of the pack) though
it has some benefit even for larger packs.
Signed-off-by: Jeff King <peff@peff.net> Acked-by: Nicolas Pitre <nico@fluxnic.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The word-diff logic accumulates + and - lines until another line type
appears (normally [ @\]), at which point it generates the word diff.
This is usually correct, but it breaks when the preimage does not have
a newline at EOF:
$ printf "%s" "a a a" >a
$ printf "%s\n" "a ab a" >b
$ git diff --no-index --word-diff a b
diff --git 1/a 2/b
index 9f68e94..6a7c02f 100644
--- 1/a
+++ 2/b
@@ -1 +1 @@
[-a a a-]
No newline at end of file
{+a ab a+}
Because of the order of the lines in a unified diff
@@ -1 +1 @@
-a a a
\ No newline at end of file
+a ab a
the '\' line flushed the buffers, and the - and + lines were never
matched with each other.
A proper fix would defer such markers until the end of the hunk.
However, word-diff is inherently whitespace-ignoring, so as a cheap
fix simply ignore the marker (and hide it from the output).
We use a prefix match for '\ ' to parallel the logic in
apply.c:parse_fragment(). We currently do not localize this string
(just accept other variants of it in git-apply), but this should be
future-proof.
Noticed-by: Ivan Shirokoff <shirokoff@yandex-team.ru> Signed-off-by: Thomas Rast <trast@student.ethz.ch> Signed-off-by: Junio C Hamano <gitster@pobox.com>
archive: re-allow HEAD:Documentation on a remote invocation
The tightening done in (ee27ca4a: archive: don't let remote clients
get unreachable commits, 2011-11-17) went too far and disallowed
HEAD:Documentation as it would try to find "HEAD:Documentation" as a
ref.
Only DWIM the "HEAD" part to see if it exists as a ref. Once we're
sure that we've been given a valid ref, we follow the normal code
path. This still disallows attempts to access commits which are not
branch tips.
Signed-off-by: Carlos Martín Nieto <cmn@elego.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function frees the individual "struct match_attr"s we
have allocated, but forgot to free the array holding their
pointers, leading to a minor memory leak (but it can add up
after checking attributes for paths in many directories).
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-cvsexportcommit: Fix calling Perl's rel2abs() on MSYS
Due to MSYS path mangling GIT_DIR contains a Windows-style path when
checked inside a Perl script even if GIT_DIR was previously set to an
MSYS-style path in a shell script. So explicitly convert to an MSYS-style
path before calling Perl's rel2abs() to make it work.
This fix was inspired by a very similar patch in WebKit:
Signed-off-by: Sebastian Schuberth <sschuberth@gmail.com> Tested-by: Pat Thoyts <patthoyts@users.sourceforge.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t9200: On MSYS, do not pass Windows-style paths to CVS
For details, see the commit message of 4114156ae9. Note that while using
$PWD as part of GIT_DIR is not required here, it does no harm and it is
more consistent. In addition, on MSYS using an environment variable should
be slightly faster than spawning an external executable.
Signed-off-by: Sebastian Schuberth <sschuberth@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
unix-socket: do not let close() or chdir() clobber errno during cleanup
unix_stream_connect and unix_stream_listen return -1 on error, with
errno set by the failing underlying call to allow the caller to write
a useful diagnosis.
Unfortunately the error path involves a few system calls itself, such
as close(), that can themselves touch errno.
This is not as worrisome as it might sound. If close() fails, this
just means substituting one meaningful error message for another,
which is perfectly fine. However, when the call _succeeds_, it is
allowed to (and sometimes might) clobber errno along the way with some
undefined value, so it is good higiene to save errno and restore it
immediately before returning to the caller. Do so.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
mailinfo documentation: accurately describe non -k case
Since its very first description of -k, the documentation for
git-mailinfo claimed that (in the case without -k) after cleaning up
bracketed strings [blah], it would insert [PATCH].
It doesn't; on the contrary, one of the important jobs of mailinfo is
to remove those strings.
Since we're already there, rewrite the paragraph to give a complete
enumeration of all the transformations. Specifically, it was missing
the whitespace normalization (run of isspace(c) -> ' ') and the
removal of leading ':'.
Signed-off-by: Thomas Rast <trast@student.ethz.ch> Signed-off-by: Junio C Hamano <gitster@pobox.com>
request-pull: use the real fork point when preparing the message
The command takes the "start" argument and computes the merge base
between it and the commit to be pulled so that we can show the diffstat,
but uses the "start" argument as-is when composing the message
The following changes since commit $X are available
to tell the integrator which commit the work is based on. Giving "origin"
(most of the time it resolves to refs/remotes/origin/master) as the start
argument is often convenient, but it is usually not the fork point, and
does not help the integrator at all.
Use the real fork point, which is the merge base we already compute, when
composing that part of the message.
Suggested-by: Linus Torvalds Signed-off-by: Junio C Hamano <gitster@pobox.com>
Documentation: rerere's rr-cache auto-creation and rerere.enabled
The description of rerere.enabled left the user in the dark as to who
might create an rr-cache directory. Add a note that simply invoking
rerere does this.
In prepare_attr_stack, we pop the old elements of the stack
(which were left from a previous lookup and may or may not
be useful to us). Our loop to do so checks that we never
reach the top of the stack. However, the code immediately
afterwards will segfault if we did actually reach the top of
the stack.
Fortunately, this is not an actual bug, since we will never
pop all of the stack elements (we will always keep the root
gitattributes, as well as the builtin ones). So the extra
check in the loop condition simply clutters the code and
makes the intent less clear. Let's get rid of it.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
attr: don't confuse prefixes with leading directories
When we prepare the attribute stack for a lookup on a path,
we start with the cached stack from the previous lookup
(because it is common to do several lookups in the same
directory hierarchy). So the first thing we must do in
preparing the stack is to pop any entries that point to
directories we are no longer interested in.
For example, if our stack contains gitattributes for:
foo/bar/baz
foo/bar
foo
but we want to do a lookup in "foo/bar/bleep", then we want
to pop the top element, but retain the others.
To do this we walk down the stack from the top, popping
elements that do not match our lookup directory. However,
the test do this simply checked strncmp, meaning we would
mistake "foo/bar/baz" as a leading directory of
"foo/bar/baz_plus". We must also check that the character
after our match is '/', meaning we matched the whole path
component.
There are two special cases to consider:
1. The top of our attr stack has the empty path. So we
must not check for '/', but rather special-case the
empty path, which always matches.
2. Typically when matching paths in this way, you would
also need to check for a full string match (i.e., the
character after is '\0'). We don't need to do so in
this case, though, because our path string is actually
just the directory component of the path to a file
(i.e., we know that it terminates with "/", because the
filename comes after that).
Helped-by: Michael Haggerty <mhagger@alum.mit.edu> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
credential-cache: report more daemon connection errors
Originally, this code remained relatively silent when we
failed to connect to the cache. The idea was that it was
simply a cache, and we didn't want to bother the user with
temporary failures (the worst case is that we would simply
ask their password again).
However, if you have a configuration failure or other
problem, it is helpful for the daemon to report those
problems. Git will happily ignore the failed error code, but
the extra information to stderr can help the user diagnose
the problem.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
On many systems, the sockaddr_un.sun_path field is quite
small. Even on Linux, it is only 108 characters. A user of
the credential-cache daemon can easily surpass this,
especially if their home directory is in a deep directory
tree (since the default location expands ~/.git-credentials).
We can hack around this in the unix-socket.[ch] code by
doing a chdir() to the enclosing directory, feeding the
relative basename to the socket functions, and then
restoring the working directory.
This introduces several new possible error cases for
creating a socket, including an irrecoverable one in the
case that we can't restore the working directory. In the
case of the credential-cache code, we could perhaps get away
with simply chdir()-ing to the socket directory and never
coming back. However, I'd rather do it at the lower level
for a few reasons:
1. It keeps the hackery behind an opaque interface instead
of polluting the main program logic.
2. A hack in credential-cache won't help any unix-socket
users who come along later.
3. The chdir trickery isn't that likely to fail (basically
it's only a problem if your cwd is missing or goes away
while you're running). And because we only enable the
hack when we get a too-long name, it can only fail in
cases that would have failed under the previous code
anyway.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use perl instead of sed for t8006-blame-textconv test
In test 'blame --textconv with local changes' of t8006-blame-textconv,
using /usr/xpg4/bin/sed (as set by SANE_TOOL_PATH), an additional
newline was added to the output from the 'helper' script.
This was noted by sed with a message such as:
sed: Missing newline at end of file zero.bin.
Sed then exits with status 2 causing the helper script to also exit
with status 2.
In turn, this was triggering a fatal error from git blame:
fatal: unable to read files to diff
To work around this difference in sed behaviour, use perl -p instead
of sed -e as it exits cleanly and does not insert the additional
newline.
Signed-off-by: Ben Walton <bwalton@artsci.utoronto.ca> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mh/ref-api-less-extra-refs:
write_head_info(): handle "extra refs" locally
show_ref(): remove unused "flag" and "cb_data" arguments
receive-pack: move more work into write_head_info()
The sendemail.multiedit variable is meant to be a boolean.
However, it is not marked as such in the code, which means
we store its value literally. Thus in the do_edit function,
perl ends up coercing it to a boolean value according to
perl rules, not git rules. This works for "0", but "false",
"no", or "off" will erroneously be interpreted as true.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/show-sig:
log --show-signature: reword the common two-head merge case
log-tree: show mergetag in log --show-signature output
log-tree.c: small refactor in show_signature()
commit --amend -S: strip existing gpgsig headers
verify_signed_buffer: fix stale comment
gpg-interface: allow use of a custom GPG binary
pretty: %G[?GS] placeholders
test "commit -S" and "log --show-signature"
log: --show-signature
commit: teach --gpg-sign option
Merge branch 'jn/maint-gitweb-utf8-fix' into maint
* jn/maint-gitweb-utf8-fix:
gitweb: Fix fallback mode of to_utf8 subroutine
gitweb: Output valid utf8 in git_blame_common('data')
gitweb: esc_html() site name for title in OPML
gitweb: Call to_utf8() on input string in chop_and_escape_str()
Documentation: rerere.enabled is the primary way to configure rerere
The wording seems to suggest that creating the directory is needed and the
setting of rerere.enabled is only for disabling the feature by setting it
to 'false'. But the configuration is meant to be the primary control and
setting it to 'true' will enable it; the rr-cache directory will be
created as necessary and the user does not have to create it.
Signed-off-by: Thomas Rast <trast@student.ethz.ch> Signed-off-by: Junio C Hamano <gitster@pobox.com>
generate array of SHA1s for alternate refs
for each unique SHA1 in array:
add_extra_ref(".have", sha1)
for each ref (including real refs and extra refs):
show_ref(refname, sha1)
But there is no need to stuff the alternate refs in extra_refs; we can
call show_ref() directly when iterating over the array, then handle
real refs separately. So change the code to:
generate array of SHA1s for alternate refs
for each unique SHA1 in array:
show_ref(".have", sha1)
for each ref (this now only includes real refs):
show_ref(refname, sha1)
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
receive-pack: move more work into write_head_info()
Move some more code from the calling site into write_head_info(), and
inline add_alternate_refs() there. (Some more simplification is
coming, and it is easier if all this code is in the same place.)
Move some helper functions to avoid the need for forward declarations.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
gitweb: Harden "grep" search against filenames with ':'
Run "git grep" in "grep" search with '-z' option, to be able to parse
response also for files with filename containing ':' character. The
':' character is otherwise (without '-z') used to separate filename
from line number and from matched line.
Note that this does not protect files with filename containing
embedded newline. This would be hard but doable for text files, and
harder or even currently impossible with binary files: git does not
quote filename in
"Binary file <foo> matches"
message, but new `--break` and/or `--header` options to git-grep could
help here.
Signed-off-by: Jakub Narebski <jnareb@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
log --show-signature: reword the common two-head merge case
While identifying the commit merged to our history as "parent #2" is
technically correct, we will never say "parent #1" (as that is the tip of
our history before the merge is made), and we rarely would say "parent #3"
(which would mean the merge is an octopus), especially when responding to
a request to pull a signed tag.
Treat the most common case to merge a single commit specially, and just
say "merged tag '<tagname>'" instead.
log-tree: show mergetag in log --show-signature output
A commit object that merges a signed tag records the "mergetag" extended
header. Check the validity of the GPG signature on it, and show it in a
way similar to how "gpgsig" extended header is shown.
The next patch needs to show the result of signature verification on a
mergetag extended header in a way similar to how embedded signature for
the commit object itself is shown. Separate out the logic to go through
the message lines and show them in the "error" color (highlighted) or the
"correct" color (dim).
Any existing commit signature was made against the contents of the old
commit, including its committer date that is about to change, and will
become invalid by amending it.
Merge branch 'jc/signed-commit' and 'jc/pull-signed-tag'
They both use the extended headers in commit objects, and the former has
necessary infrastructure to show them that is useful to view the result of
the latter.