send-email: respect in-reply-to regardless of threading
git-send-email supports the --in-reply-to option even with
--no-thread. However, the code that adds the relevant mail headers
was guarded by a test for --thread.
Remove the test, so that the user's choice is respected.
Signed-off-by: Thomas Rast <trast@student.ethz.ch> Signed-off-by: Junio C Hamano <gitster@pobox.com>
When memmem() was imported from glibc 2.2 into compat/, an optimization
was dropped in the process, in order to make the code smaller and simpler.
It was OK because memmem() wasn't used in performance-critical code. Now
the situation has changed and we can benefit from this optimization.
The trick is to avoid calling memcmp() if the first character of the needle
already doesn't match. Checking one character directly is much cheaper
than the function call overhead. We keep the first character of the needle
in the variable named point and the rest in the one named tail.
The following commands were run in a Linux kernel repository and timed, the
best of five results is shown:
$ STRING='Ensure that the real time constraints are schedulable.'
$ git log -S"$STRING" HEAD -- kernel/sched.c >/dev/null
On Windows Vista x64, before:
real 0m8.470s
user 0m0.000s
sys 0m0.000s
And after the patch:
real 0m1.887s
user 0m0.000s
sys 0m0.000s
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use memmem() instead of open-coding it. The system libraries usually have a
much faster version than the memcmp()-loop here. Even our own fall-back in
compat/, which is used on Windows, is slightly faster.
The following commands were run in a Linux kernel repository and timed, the
best of five results is shown:
$ STRING='Ensure that the real time constraints are schedulable.'
$ git log -S"$STRING" HEAD -- kernel/sched.c >/dev/null
Short story: There is a section in t3400 that tests fundamental rebase
properties. 3ec7371f (Add two extra tests for git rebase, 2009-02-09)
added a check that rebase works on a detached HEAD, but the test was put
near the end of the file. This moves it to a more suitable place.
Long story: The test that preceded the one in question tests that a
rebased commit degrades from a content change with mode change to a
mere mode change. But on Windows, where we have core.filemode=false,
the original commit did not record the mode change, and so the rebase
operation did not rebase anything. This caused the subsequent detached
HEAD test to fail.
Signed-off-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
gitk: Fix possible infinite loop and display corruption
This fixes an issue reported by Johannes Sixt on the git mailing list:
> This recipe sends gitk into an endless loop. In git.git do:
>
> cd t
> # remove chmod a+x A near the end of the file
> sed -i 's/chmod/: chmod/' t3400-rebase.sh
> sh t3400-rebase.sh --debug
> cd trash\ directory.t3400-rebase/
> gitk master modechange modechange@{1}
>
>
> I briefly see the history chart, but the dot that should be modechange@{1}
> is missing. One automatically selected commit is shown in the diff section
> below. But then the commit list is cleared and gitk goes into an infinite
> loop.
>
> Things work alright if either modechange@{1} is dropped, or the 'chmod'
> line is left unchanged, which is a bit strange.
>
> This is with git version 1.6.1.2.390.gba743
There were actually two problems. This recipe created a situation where
git log would output a child commit after its parent. This meant that
we called fix_reversal which called splitvarc, which should call modify_arc
to note the fact that it has modified the arc that it has just split. It
wasn't, which meant that displayorder and other variables got into an
inconsistent state (a commit appearing twice in displayorder).
This then meant that the targetrow/targetid logic in drawvisible thought
it need to redraw each time. That, together with the fact that drawvisible
called drawcommits which called drawvisible if a redraw was needed, led
to the infinite loop.
In fact drawvisible is now the only caller of drawcommits. Thus, the
start and end row arguments to drawcommits always encompass the whole
visible area, so drawcommits doesn't need to call drawvisible to redraw;
it just needs to clear the screen and draw what it's been asked to.
This fixes these two problems by adding a call to modify_arc in
splitvarc and by taking out the call to drawvisible in drawcommits.
It also removes an unrelated left-over debugging puts in external_blame.
The parameters accepted by the --whitespace option of "git apply" have
changed over time, and the documentation for "git rebase" was out of
sync. Remove the specific parameter list from the "git rebase"
documentation and simply point to the "git apply" documentation for
details, as is already done in the "git am" documentation.
Signed-off-by: Todd Zullinger <tmz@pobox.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now is_kept_pack() is just a member lookup into a structure, we can write
it as such.
Also rewrite the sole caller of has_sha1_kept_pack() to switch on the
criteria the callee uses (namely, revs->kept_pack_only) between calling
has_sha1_kept_pack() and has_sha1_pack(), so that these two callees do not
have to take a pointer to struct rev_info as an argument.
This removes the header file dependency issue temporarily introduced by
the earlier commit, so we revert changes associated to that as well.
This removes --unpacked=<packfile> parameter from the revision parser, and
rewrites its use in git-repack to pass a single --kept-pack-only option
instead.
The new --kept-pack-only option means just that. When this option is
given, is_kept_pack() that used to say "not on the --unpacked=<packfile>
list" now says "the packfile has corresponding .keep file".
This refactors three loops that check if a given packfile is on the
ignore_packed list into a function is_kept_pack(). The function returns
false for a pack on the list, and true for a pack not on the list, because
this list is solely used by "git repack" to pass list of packfiles that do
not have corresponding .keep files, i.e. a packfile not on the list is
"kept".
Its "ignore_packed" parameter always comes from struct rev_info. This
patch makes the function take a pointer to the surrounding structure, so
that the refactoring in the next patch becomes easier to review.
There is an unfortunate header file dependency and the easiest workaround
is to temporarily move the function declaration from cache.h to
revision.h; this will be moved back to cache.h once the function loses
this "ignore_packed" parameter altogether in the later part of the
series.
has_sha1_pack(): refactor "pretend these packs do not exist" interface
Most of the callers of this function except only one pass NULL to its last
parameter, ignore_packed.
Introduce has_sha1_kept_pack() function that has the function signature
and the semantics of this function, and convert the sole caller that does
not pass NULL to call this new function.
All other callers and has_sha1_pack() lose the ignore_packed parameter.
The script used $args and $existing without initializing it to empty. It
would have been confused by an environment variable the end user had
before running it.
git-svn - return original format_svn_date semantics
When %z was removed from the strftime call and subsituted with a
local gmt offset calculation, time() was no longer the default for
all time functions as it was with the previous localtime(shift).
This is now corrected so that format_svn_time behaves as it used to.
Signed-off-by: Ben Walton <bwalton@artsci.utoronto.ca> Acked-by: Eric Wong <normalperson@yhbt.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-svn: disable broken symlink workaround by default
Even though this will break things for some extremely rare repositories
used by broken Windows clients, it's probably not worth enabling this by
default as it has negatively affected many more users than it has helped
from what we've seen so far.
The extremely rare repositories that have broken symlinks in them will be
silently corrupted in import; but users can still reenable this option and
restart the import.
Signed-off-by: Eric Wong <normalperson@yhbt.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
When there is nothing to be skipped, the output from
rev-list --bisect-vars was eval'ed without first being
strung together with &&; this is probably not a problem
as it is much less likely to be a bad input than the list
handcrafted by the filter_skip function, but it still is
a good discipline.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
bisect: fix quoting TRIED revs when "bad" commit is also "skip"ped
When the "bad" commit was also "skip"ped and when more than one
commit was skipped, the "filter_skipped" function would have
printed something like:
bisect_rev=<hash1>|<hash2>
(where <hash1> and <hash2> are hexadecimal sha1 hashes)
and this would have been evaled later as piping "bisect_rev=<hash1>"
into "<hash2>", which would have failed.
So this patch makes the "filter_skipped" function properly quote
what it outputs, so that it will print something like:
bisect_rev='<hash1>|<hash2>'
which will be properly evaled later. The caller was not stopping
properly because the scriptlet this function returned to be evaled
was not strung together with && and because of this, an error in
an earlier part of the output was simply ignored.
A test case is added to the test suite.
And while at it, we also initialize the VARS, FOUND and TRIED
variables, so that we protect ourselves from environment variables
the user may have with these names.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
When you are in the middle of "git rebase", "git am --abort" by mistake
would have referred to nonexistent ORIG_HEAD and barfed, or worse yet, used
a stale ORIG_HEAD and taken you to an unexpected commit.
Also the option parsing did not reject "git am --abort --skip".
git-am: Keep index in case of abort with dirty index
git am --abort resets the index unconditionally. But in case a previous
git am exited due to a dirty index it is preferable to keep that index.
Make it so.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
OS X's GNU grep does not support -P/--perl-regexp.
We use a basic RE instead, and simplify the pattern slightly by
replacing '+' with '*' so it can be more easily expressed using a basic
RE. The important part of pattern, checking for a SHA-1 has suffix in
the successful PUT/MOVE operations, remains the same. Also, a-z instead
of a-f was an obvious mistake in the original RE. Here are samples of
what we want to match:
The AIX mkstemp() modifies its template parameter to an empty string if
the call fails. The existing code had already recomputed the template,
but too late to be good.
See also 6ff6af62, which fixed this problem in a different spot.
Signed-off-by: Mike Ralphson <mike@abacus.co.uk> Signed-off-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make sure objects/pack exists before creating a new pack
In a repository created with git older than f49fb35 (git-init-db: create
"pack" subdirectory under objects, 2005-06-27), objects/pack/ directory is
not created upon initialization. It was Ok because subdirectories are
created as needed inside directories init-db creates, and back then,
packfiles were recent invention.
After the said commit, new codepaths started relying on the presense of
objects/pack/ directory in the repository. This was exacerbated with 8b4eb6b (Do not perform cross-directory renames when creating packs,
2008-09-22) that moved the location temporary pack files are created from
objects/ directory to objects/pack/ directory, because moving temporary to
the final location was done carefully with lazy leading directory creation.
Many packfile related operations in such an old repository can fail
mysteriously because of this.
This commit introduces two helper functions to make things work better.
- odb_mkstemp() is a specialized version of mkstemp() to refactor the
code and teach it to create leading directories as needed;
- odb_pack_keep() refactors the code to create a ".keep" file while
create leading directories as needed.
This patch allows the HTTP tests to run on OS X 10.5. It is not
sufficient to be able to pass in LIB_HTTPD_PATH and
LIB_HTTPD_MODULE_PATH alone, as the apache.conf also needs a couple
tweaks.
These changes are put into an <IfDefine> to keep them Darwin specific,
but this means lib-httpd.sh needs to be modified to pass -DDarwin to
apache when running on Darwin. As long as we're making this change to
lib-httpd.sh, we may as well set LIB_HTTPD_PATH and
LIB_HTTPD_MODULE_PATH to appropriate default values for the platform.
Note that we now pass HTTPD_PARA to apache at shutdown as well.
Otherwise apache will emit a harmless, but noisy warning that LogFormat
is an unknown directive.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
gitattributes.txt: Path matching rules are explained in gitignore.txt
The rules how the patterns are matched against path names are the same
for .gitattribute and .gitignore files.
This also replace the notion "glob pattern" by "pattern" because
gitignore.txt talks about "glob" only in some contexts where the pattern
is mentioned.
Signed-off-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
README: fix path to "gitcvs-migration.txt" and be more consistent
README suggested to look at "Documentation/gittutorial.txt" for the
tutorial and to use "man git-commandname" for documentation of each
command.
This was not consistent because the tutorial can also be available with
"man gittutorial" once git is installed, and the documentation for each
command can be available at "Documentation/git-commandname.txt" before
installing git.
This patch tries to make the description more consistent. It also fixes
the path to the cvs-migration documentation that changed from
"Documentation/cvs-migration.txt" to "Documentation/gitcvs-migration.txt".
Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-quiltimport: preserve standard input to be able to read user input
When run without --author and it fails to determine an author, git
quiltimport tries `read patch_author` to get user input, but standard
input has been redirected to the patch series file. This commit lets
quiltimport read the series file through file descriptor 3 so that the
standard input is preserved.
Reported by Uwe Kleine-König through http://bugs.debian.org/515910
Signed-off-by: Gerrit Pape <pape@smarden.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Install builtins with the user and group of the installing personality
If 'make install' was run with sufficient privileges, then the installed
builtins in gitexecdir, which are either hardlinked, symlinked, or copied,
would receive the user and group of whoever built git. With this commit
the initial hardlink or copy is done from the installation tree and not
the build tree to fix this.
Signed-off-by: Gerrit Pape <pape@smarden.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
send-email: don't create temporary compose file until it is needed
Commit eed6ca7 caused a minor regression when it switched to using
tempfile() to generate the temporary compose file. Since tempfile()
creates the file at the time it generates the filename, zero-length
temporary files are being left behind unless --compose is used (in which
case the file is cleaned up).
This patch fixes the regression by not calling tempfile() to generate
the compose filename unless --compose is in use.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* git://git.bogomips.org/git-svn:
git-svn: read the dcommit url from the config file on a per remote basis
git-svn: fix delete+add branch tracking with empty files
git-svn: Create leading directories in create-ignore
When a particular changeset affects multiple depot paths, it
will appear multiple times in the output of "p4 changes".
Filter out the duplicates to avoid the extra empty commits that
this otherwise would create.
Signed-off-by: Pete Wyckoff <pw@padd.com> Acked-by: Simon Hausmann <simon@lst.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-svn: read the dcommit url from the config file on a per remote basis
The commit url for dcommit is determined in the following order:
commandline option --commit-url
svn.commiturl
svn-remote.<name>.commiturl
svn-remote.<name>.url
Signed-off-by: Peter Oberndorfer <kumbayo84@arcor.de> Acked-by: Eric Wong <normalperson@yhbt.net>
git-svn: fix delete+add branch tracking with empty files
Original bug report and test case by Björn Steinbrink.
Björn Steinbrink <B.Steinbrink@gmx.de> wrote:
> Hi Eric,
>
> seems that the empty symlink stuff gets confused about which revision to
> use when looking for the parent's file.
>
> r3 = f1a6fcf6b0a1c4a373d0b2b65a3d70700084f361 (tags/1.0.1)
> Found possible branch point: file:///home/doener/h/svn/tags/1.0 => file:///home/doener/h/svn/branches/1.0, 4
> Found branch parent: (1.0) 63ae640ba01014ecbb3df590999ed1fa5914545b
> Following parent with do_switch
> Successfully followed parent
> r5 = 26fcfef5bcced97ab74faf1af7341a2ae0d272aa (1.0)
> Found possible branch point: file:///home/doener/h/svn/branches/1.0 => file:///home/doener/h/svn/tags/1.0.1, 5
> Found branch parent: (tags/1.0.1) 26fcfef5bcced97ab74faf1af7341a2ae0d272aa
> Following parent with do_switch
> Scanning for empty symlinks, this may take a while if you have many empty files
> You may disable this with `git config svn.brokenSymlinkWorkaround false'.
> This may be done in a different terminal without restarting git svn
> Filesystem has no item: File not found: revision 3, path '/branches/1.0/file' at /usr/local/libexec/git-core/git-svn line 3318
>
> Note how it tries to look at revision 3 instead of revision 5 (which it
> correctly detected as the parent). The import succeeds when
> svn.brokenSymlinkWorkaround is set to false. Testcase below.
Merge branch 'for-junio' of git://source.winehq.org/~julliard/git/git
* 'for-junio' of git://source.winehq.org/~julliard/git/git:
Add a README in the contrib/emacs directory.
git.el: Improve the confirmation message on remove and revert.
git.el: Make sure that file lists are sorted as they are created.
git.el: Make sure that file lists are sorted as they are created.
This avoids a possibly redundant sort in git-update-status-files and
git-status-filenames-map, and allows callers to continue using the
list without having to copy it.
It also fixes the confusing success messages reported by Brent
Goodrick.
Talking about --date, one thing I wanted for the 1234567890 date was to
get things in the raw format. Sure, you get them with --pretty=raw, but it
felt a bit sad that you couldn't just ask for the date in raw format.
So here's a throw-away patch (meaning: I won't be re-sending it, because I
really don't think it's a big deal) to add "--date=raw". It just prints
out the internal raw git format - seconds since epoch plus timezone (put
another way: 'date +"%s %z"' format)
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
More friendly message when locking the index fails.
Just saying that index.lock exists doesn't tell the user _what_ to do
to fix the problem. We should give an indication that it's normally
safe to delete index.lock after making sure git isn't running here.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
gitweb: Hyperlink multiple git hashes on the same commit message line
The current implementation only hyperlinks the first hash on
a given line of the commit message. It seems sensible to
highlight all of them if there are multiple, and it seems
plausible that there would be multiple even with a tidy line
length limit, because they can be abbreviated as short as 8
characters.
Benchmark:
I wanted to make sure that using the 'e' switch to the Perl regex
wasn't going to kill performance, since this is called once per commit
message line displayed.
In all three A/B scenarios I tried, the A and B yielded the same
results within 2%, where A is the version of code before this patch
and B is the version after.
1: View a commit message containing the last 1000 commit hashes
2: View a commit message containing 1000 lines of 40 dots to avoid
hyperlinking at the same message length
3: View a short merge commit message with a few lines of text and
no hashes
All were run in CGI mode on my sub-production hardware on a recent
clone of git.git. Numbers are the average of 10 reqests per second
with the first request discarded, since I expect this change to affect
primarily CPU usage. Measured with ApacheBench.
Note that the web page rendered was the same; while the new code
supports multiple hashes per line, there was at most one per line.
The primary purpose of scenarios 2 and 3 were to verify that the
addition of 1000 commit messages had an impact on how much of the time
was spent rendering commit messages. They were all within 2% of 0.80
requests per second (much faster).
So I think the patch has no noticeable effect on performance.
Signed-off-by: Marcel M. Cary <marcel@oak.homeunix.org> Acked-by: Jakub Narebski <jnareb@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
system_path(): simplify using strip_path_suffix(), and add suffix "git"
At least for the author of this patch, the logic in system_path() was
too hard to understand. Using the function strip_path_suffix() documents
the idea of the code better.
The real change is to add the suffix "git", so that a runtime prefix will
be computed correctly even when the executable was called in /git/ as is
the case in msysGit (Windows insists to search the current directory
before the PATH when looking for an executable).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Acked-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function strip_path_suffix() will try to strip a given suffix from
a given path. The suffix must start at a directory boundary (i.e. "core"
is not a path suffix of "libexec/git-core", but "git-core" is).
Arbitrary runs of directory separators ("slashes") are assumed identical.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Acked-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
tests: fix "export var=val"
Skip timestamp differences for diff --no-index
Documentation/git-push: --all, --mirror, --tags can not be combined
The improved error handling catches a bug in filter-branch when using
-d pointing to a path outside any git repository:
$ git filter-branch -d /tmp/foo master
fatal: Not a git repository (or any of the parent directories): .git
This error message comes from git for-each-ref in line 224. GIT_DIR is
set correctly by git-sh-setup (to the foo.git repository), but not
exported (yet).
Signed-off-by: Lars Noschinski <lars@public.noschinski.de> Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
We display empty diffs for files whose timestamps have changed.
Usually, refreshing the index makes those empty diffs go away.
However, when not using the index they are not very useful and
there is no option to suppress them.
This forces on the skip_stat_unmatch option for diff --no-index,
suppressing any empty diffs. This option is also used for diffs
against the index when "diff.autorefreshindex" is set, but that
option does not apply to diff --no-index.
Signed-off-by: Michael Spang <mspang@uwaterloo.ca> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-svn: fix parsing of timestamp obtained from svn
Ward Wouts reports that git-svn barfed like this:
Unable to parse date: 2004-03-09T09:44:33.Z at /usr/bin/git-svn line 3995
The parse_svn_date sub expects there always are one or more digits after
the decimal point to record fractional seconds, but this example does not
and results in a failure like this.
The fix is based on the original fix by the reporter, further cleaned up.
Signed-off-by: Junio C Hamano <gitster@pobox.com> Acked-by: Eric Wong <normalperson@yhbt.net>
gitweb: Fix warnings with override permitted but no repo override
When a feature like "blame" is permitted to be overridden in the
repository configuration but it is not actually set in the repository,
a warning is emitted due to the undefined value of the repository
configuration, even though it's a perfectly normal condition.
Emitting warning is grounds for test failure in the gitweb test
script.
This error was caused by rewrite of git_get_project_config from using
"git config [<type>] <name>" for each individual configuration
variable checked to parsing "git config --list --null" output in
commit b201927 (gitweb: Read repo config using 'git config -z -l').
Earlier version of git_get_project_config was returning empty string
if variable do not exist in config; newer version is meant to return
undef in this case, therefore change in feature_bool was needed.
Additionally config_to_* subroutines were meant to be invoked only if
configuration variable exists; therefore we added early return to
git_get_project_config: it now returns no value if variable does not
exists in config. Otherwise config_to_* subroutines (config_to_bool
in paryicular) wouldn't be able to distinguish between the case where
variable does not exist and the case where variable doesn't have value
(the "[section] noval" case, which evaluates to true for boolean).
While at it fix bug in config_to_bool, where checking if $val is
defined (if config variable has value) was done _after_ stripping
leading and trailing whitespace, which lead to 'Use of uninitialized
value' warning.
Add test case for features overridable but not overriden in repo
config, and case for no value boolean configuration variable.
Signed-off-by: Marcel M. Cary <marcel@oak.homeunix.org> Signed-off-by: Jakub Narebski <jnareb@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
bash completion: refactor common log, shortlog and gitk options
Refactor options that are useful for more than one of them into a
variable used by the relevant completions. This has the effect of
adding the following options to git-log:
gitweb: fix wrong base URL when non-root DirectoryIndex
CGI::url() has some issues when rebuilding the script URL if the script
is a DirectoryIndex.
One of these issue is the inability to strip PATH_INFO, which is why
we had to do it ourselves.
Another issue is that the resulting URL cannot be used for the <base>
tag: it works if we're the DirectoryIndex at the root level, but not
otherwise.
We fix this by building the proper base URL ourselves, and improve the
comment about the need to strip PATH_INFO manually while we're at it.
Additionally t/t9500-gitweb-standalone-no-errors.sh had to be modified
to set SCRIPT_NAME variable (CGI standard states that it MUST be set,
and now gitweb uses it if PATH_INFO is not empty, as is the case for
some of tests in t9500).
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com> Signed-off-by: Jakub Narebski <jnareb@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
One might wonder why add options that specify the default behaviour
anyway (e.g. '--commit', '--no-squash', etc.). Users can override the
default with config options (e.g. 'branch.<name>.mergeoptions',
'merge.log'), but sometimes might still need the default behaviour.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de> Acked-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-svn: Fix for rewriteRoot URL containing username.
If the new svn root URL given with the svn-remote.<repo>.rewriteRoot config option
(or by the --rewrite-root option to 'git svn init') contains a username
(such as 'svn+ssh://username@example.com/repo'), find_by_url() cannot find
the repository URL, because the URL contained in the commit message does have
the username removed.
Signed-off-by: Dévai Tamás <devait@mailbox.sk> Acked-by: Eric Wong <normalperson@yhbt.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
builtin-receive-pack.c: fix compiler warnings about format string
While all of the strings passed to warning() are, in fact, literals, the
compiler doesn't recognize them as such because it doesn't see through
the loop used to iterate over them:
builtin-receive-pack.c: In function 'warn_unconfigured_deny':
builtin-receive-pack.c:247: warning: format not a string literal and no format arguments
builtin-receive-pack.c: In function 'warn_unconfigured_deny_delete_current':
builtin-receive-pack.c:273: warning: format not a string literal and no format arguments
Calm the compiler by adding easily recognizable format string literals.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ms/mailmap:
Move mailmap documentation into separate file
Change current mailmap usage to do matching on both name and email of author/committer.
Add map_user() and clear_mailmap() to mailmap
Add find_insert_index, insert_at_index and clear_func functions to string_list
Add mailmap.file as configurational option for mailmap location
use a hash of the lock token as the suffix for PUT/MOVE
After 753bc91 ("Remove the requirement opaquelocktoken uri scheme"),
lock tokens are in the URI forms in which they are received from the
server, eg. 'opaquelocktoken:', 'urn:uuid:'.
However, "start_put" (and consequently "start_move"), which attempts to
create a unique temporary file using the UUID of the lock token,
inadvertently uses the lock token in its URI form. These file
operations on the server may not be successful (specifically, in
Windows), due to the colon ':' character from the URI form of the lock
token in the file path.
This patch uses a hash of the lock token instead, guaranteeing only
"safe" characters (a-f, 0-9) are used in the file path.
The token's hash is generated when the lock token is received from the
server in handle_new_lock_ctx, minimizing the number of times of
hashing.
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 6564828 (git-send-email: Generalize auto-cc recipient
mechanism., 2007-12-25) we can suppress automatic Cc generation
separately for each of the possible address sources. However,
--suppress-cc=sob suppressed both SOB lines and body (but not header)
Cc lines, contrary to the name.
Change --suppress-cc=sob to mean only SOB lines, and add separate
choices 'bodycc' (body Cc lines) and 'body' (both 'sob' and 'bodycc').
The option --no-signed-off-by-cc now acts like --suppress-cc=sob,
which is not backwards compatible but matches the name of the option.
Also update the documentation and add a few tests.
Original patch by me. Revised by Thomas Rast, who contributed the
documentation and test updates.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before this commit, send-email was unable to handle such a message as it
did not handle folded header lines, nor multiple recipients in a Cc
line.
This patch:
- Unfolds header lines by pre-processing the header before extracting
any of its fields.
- Handles Cc lines with multiple recipients.
- Adds use of Mail::Address if available for splitting Cc line and
the "Who should the emails be sent to?" prompt", with fall back to
existing split_addrs() function.
- Tests the new functionality and adds two tests for detecting whether
"From:" appears correctly in message body when patch author differs
from patch sender.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
send-email: allow send-email to run outside a repo
send-email is supposed to be able to run from outside a repo. This
ability was broken by commits caf0c3d6 (make the message file name more
specific) and 5df9fcf6 (interpret unknown files as revision lists).
This commit provides a fix for both.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>