The 'feature.experimental' setting includes config options that are
not committed to become defaults, but could use additional testing.
Update the following config settings to take new defaults, and to
use the repo_settings struct if not already using them:
* 'pack.useSparse=true'
* 'fetch.negotiationAlgorithm=skipping'
In the case of fetch.negotiationAlgorithm, the existing logic
would load the config option only when about to use the setting,
so had a die() statement on an unknown string value. This is
removed as now the config is parsed under prepare_repo_settings().
In general, this die() is probably misplaced and not valuable.
A test was removed that checked this die() statement executed.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The feature.manyFiles setting is suitable for repos with many
files in the working directory. By setting index.version=4 and
core.untrackedCache=true, commands such as 'git status' should
improve.
While adding this setting, modify the index version precedence
tests to check how this setting overrides the default for
index.version is unset.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The core.untrackedCache config setting is slightly complicated,
so clarify its use and centralize its parsing into the repo
settings.
The default value is "keep" (returned as -1), which persists the
untracked cache if it exists.
If the value is set as "false" (returned as 0), then remove the
untracked cache if it exists.
If the value is set as "true" (returned as 1), then write the
untracked cache and persist it.
Instead of relying on magic values of -1, 0, and 1, split these
options into an enum. This allows the use of "-1" as a
default value. After parsing the config options, if the value is
unset we can initialize it to UNTRACKED_CACHE_KEEP.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The commit-graph feature has seen a lot of activity in the past
year or so since it was introduced. The feature is a critical
performance enhancement for medium- to large-sized repos, and
does not significantly hurt small repos.
Change the defaults for core.commitGraph and gc.writeCommitGraph
to true so users benefit from this feature by default.
There are several places in the test suite where the environment
variable GIT_TEST_COMMIT_GRAPH is disabled to avoid reading a
commit-graph, if it exists. The config option overrides the
environment, so swap these. Some GIT_TEST_COMMIT_GRAPH assignments
remain, and those are to avoid writing a commit-graph when a new
commit is created.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t6501-freshen-objects.sh sends the standard error from
'git gc' to a file and verifies that it is empty. This
is intended as a way to ensure no warnings are written
during the operation. However, as the commit-graph is
added as a step to 'git gc', its progress will appear
in the output.
Pass the '-q' argument to avoid a failing test case
when progress is written.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are a few important config settings that are not loaded
during git_default_config. These are instead loaded on-demand.
Centralize these config options to a single scan, and store
all of the values in a repo_settings struct. The values for
each setting are initialized as negative to indicate "unset".
This centralization will be particularly important in a later
change to introduce "meta" config settings that change the
defaults for these config settings.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
When one step in multi step cherry-pick or revert is reset or
committed, the command line prompt script failed to notice the
current status, which has been improved.
The tree-walk API learned to pass an in-core repository
instance throughout more codepaths.
* nd/tree-walk-with-repo:
t7814: do not generate same commits in different repos
Use the right 'struct repository' instead of the_repository
match-trees.c: remove the_repo from shift_tree*()
tree-walk.c: remove the_repo from get_tree_entry_follow_symlinks()
tree-walk.c: remove the_repo from get_tree_entry()
tree-walk.c: remove the_repo from fill_tree_descriptor()
sha1-file.c: remove the_repo from read_object_with_reference()
"git cherry-pick/revert" learned a new "--skip" action.
* ra/cherry-pick-revert-skip:
cherry-pick/revert: advise using --skip
cherry-pick/revert: add --skip option
sequencer: use argv_array in reset_merge
sequencer: rename reset_for_rollback to reset_merge
sequencer: add advice for revert
The code to read state files used by the sequencer machinery for
"git status" has been made more robust against a corrupt or stale
state files.
* pw/status-with-corrupt-sequencer-state:
status: do not report errors in sequencer/todo
sequencer: factor out todo command name parsing
sequencer: always allow tab after command name
"git blame" learned to "ignore" commits in the history, whose
effects (as well as their presence) get ignored.
* br/blame-ignore:
t8014: remove unnecessary braces
blame: drop some unused function parameters
blame: add a test to cover blame_coalesce()
blame: use the fingerprint heuristic to match ignored lines
blame: add a fingerprint heuristic to match ignored lines
blame: optionally track line fingerprints during fill_blame_origin()
blame: add config options for the output of ignored or unblamable lines
blame: add the ability to ignore commits and their changes
blame: use a helper function in blame_chunk()
Move oidset_parse_file() to oidset.c
fsck: rename and touch up init_skiplist()
"git multi-pack-index" learned expire and repack subcommands.
* ds/midx-expire-repack:
t5319: use 'test-tool path-utils' instead of 'ls -l'
t5319-multi-pack-index.sh: test batch size zero
midx: add test that 'expire' respects .keep files
multi-pack-index: test expire while adding packs
midx: implement midx_repack()
multi-pack-index: prepare 'repack' subcommand
multi-pack-index: implement 'expire' subcommand
midx: refactor permutation logic and pack sorting
midx: simplify computation of pack name lengths
multi-pack-index: prepare for 'expire' subcommand
Docs: rearrange subcommands for multi-pack-index
repack: refactor pack deletion for future use
* js/mingw-use-utf8:
mingw: fix possible buffer overrun when calling `GetUserNameW()`
mingw: use Unicode functions explicitly
mingw: get pw_name in UTF-8 format
The "git clone" documentation refers to command line options in its
description in the short form; they have been replaced with long
forms to make them more recognisable.
* qn/clone-doc-use-long-form:
docs: git-clone: list short form of options first
docs: git-clone: refer to long form of options
The configuration variable rebase.rescheduleFailedExec should be
effective only while running an interactive rebase and should not
affect anything when running an non-interactive one, which was not
the case. This has been corrected.
* js/rebase-reschedule-applies-only-to-interactive:
rebase --am: ignore rebase.rescheduleFailedExec
ref-filter: fix memory leak in `free_array_item()`
We treat the `value` pointer as a pointer to a struct and free its `s`
field. But `value` is in fact an array of structs. As a result, we only
free the first `s` out of `used_atom_cnt`-many and leak the rest. Make
sure we free all items in `value`.
In the caller, `ref_array_clear()`, this means we need to be careful not
to zero `used_atom_cnt` until after we've called `free_array_item()`. We
could move just a single line, but let's keep related things close
together instead, by first handling `array`, then `used_atom`.
Signed-off-by: Martin Ågren <martin.agren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Correct the api-trace2 documentation, which lists "signal" as an
expected field for the signal event type, but which actually outputs
"signo" as the field name.
Signed-off-by: Josh Steadmon <steadmon@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git fetch" and "git pull" reports when a fetch results in
non-fast-forward updates to let the user notice unusual situation.
The commands learned "--no-shown-forced-updates" option to disable
this safety feature.
* ds/fetch-disable-force-notice:
pull: add --[no-]show-forced-updates passthrough
fetch: warn about forced updates in branch listing
fetch: add --[no-]show-forced-updates argument
"git status" can be told a non-standard default value for the
"--[no-]ahead-behind" option with a new configuration variable
status.aheadBehind.
* jh/status-aheadbehind:
status: ignore status.aheadbehind in porcelain formats
status: warn when a/b calculation takes too long
status: add status.aheadbehind setting
"git submodule foreach" did not protect command line options passed
to the command to be run in each submodule correctly, when the
"--recursive" option was in use.
* ms/submodule-foreach-fix:
submodule foreach: fix recursion of options
* jh/msvc:
msvc: ignore .dll and incremental compile output
msvc: avoid debug assertion windows in Debug Mode
msvc: do not pretend to support all signals
msvc: add pragmas for common warnings
msvc: add a compile-time flag to allow detailed heap debugging
msvc: support building Git using MS Visual C++
msvc: update Makefile to allow for spaces in the compiler path
msvc: fix detect_msys_tty()
msvc: define ftello()
msvc: do not re-declare the timespec struct
msvc: mark a variable as non-const
msvc: define O_ACCMODE
msvc: include sigset_t definition
msvc: fix dependencies of compat/msvc.c
mingw: replace mingw_startup() hack
obstack: fix compiler warning
cache-tree/blame: avoid reusing the DEBUG constant
t0001 (mingw): do not expect a specific order of stdout/stderr
Mark .bat files as requiring CR/LF endings
mingw: fix a typo in the msysGit-specific section
Use "Erase in Line" CSI sequence that is already used in the editor
support to clear cruft in the progress output.
* sg/rebase-progress:
progress: use term_clear_line()
rebase: fix garbled progress display with '-x'
pager: add a helper function to clear the last line in the terminal
t3404: make the 'rebase.missingCommitsCheck=ignore' test more focused
t3404: modernize here doc style
Two new commands "git switch" and "git restore" are introduced to
split "checking out a branch to work on advancing its history" and
"checking out paths out of the index and/or a tree-ish to work on
advancing the current history" out of the single "git checkout"
command.
* nd/switch-and-restore: (46 commits)
completion: disable dwim on "git switch -d"
switch: allow to switch in the middle of bisect
t2027: use test_must_be_empty
Declare both git-switch and git-restore experimental
help: move git-diff and git-reset to different groups
doc: promote "git restore"
user-manual.txt: prefer 'merge --abort' over 'reset --hard'
completion: support restore
t: add tests for restore
restore: support --patch
restore: replace --force with --ignore-unmerged
restore: default to --source=HEAD when only --staged is specified
restore: reject invalid combinations with --staged
restore: add --worktree and --staged
checkout: factor out worktree checkout code
restore: disable overlay mode by default
restore: make pathspec mandatory
restore: take tree-ish from --source option instead
checkout: split part of it to new command 'restore'
doc: promote "git switch"
...
Protocol capabilities that go over wire should never be translated,
but it was incorrectly marked for translation, which has been
corrected. The output of protocol capabilities for debugging has
been tweaked a bit.
* nd/fetch-capability-tweak:
fetch-pack: print server version at the top in -v -v
fetch-pack: print all relevant supported capabilities with -v -v
fetch-pack: move capability names out of i18n strings
Code clean-up to remove hardcoded SHA-1 hash from many places.
* jk/oidhash:
hashmap: convert sha1hash() to oidhash()
hash.h: move object_id definition from cache.h
khash: rename oid helper functions
khash: drop sha1-specific map types
pack-bitmap: convert khash_sha1 maps into kh_oid_map
delta-islands: convert island_marks khash to use oids
khash: rename kh_oid_t to kh_oid_set
khash: drop broken oid_map typedef
object: convert create_object() to use object_id
object: convert internal hash_obj() to object_id
object: convert lookup_object() to use object_id
object: convert lookup_unknown_object() to use object_id
pack-objects: convert locate_object_entry_hash() to object_id
pack-objects: convert packlist_find() to use object_id
pack-bitmap-write: convert some helpers to use object_id
upload-pack: rename a "sha1" variable to "oid"
describe: fix accidental oid/hash type-punning
The code to parse scaled numbers out of configuration files has
been made more robust and also easier to follow.
* rs/config-unit-parsing:
config: simplify parsing of unit factors
config: don't multiply in parse_unit_factor()
config: use unsigned_mult_overflows to check for overflows
* js/gcc-8-and-9:
config: avoid calling `labs()` on too-large data type
winansi: simplify loading the GetCurrentConsoleFontEx() function
kwset: allow building with GCC 8
poll (mingw): allow compiling with GCC 8 and DEVELOPER=1
"git rebase --abort" used to leave refs/rewritten/ when concluding
"git rebase -r", which has been corrected.
* pw/rebase-abort-clean-rewritten:
rebase --abort/--quit: cleanup refs/rewritten
sequencer: return errors from sequencer_remove_state()
rebase: warn if state directory cannot be removed
rebase: fix a memory leak
* am/p4-branches-excludes:
git-p4: respect excluded paths when detecting branches
git-p4: add failing test for "git-p4: respect excluded paths when detecting branches"
git-p4: don't exclude other files with same prefix
git-p4: add failing test for "don't exclude other files with same prefix"
git-p4: don't groom exclude path list on every commit
git-p4: match branches case insensitively if configured
git-p4: add failing test for "git-p4: match branches case insensitively if configured"
git-p4: detect/prevent infinite loop in gitCommitByP4Change()
The commit-graph file is now part of the "files that the runtime
may keep open file descriptors on, all of which would need to be
closed when done with the object store", and the file descriptor to
an existing commit-graph file now is closed before "gc" finalizes a
new instance to replace it.
* ds/close-object-store:
packfile: rename close_all_packs to close_object_store
packfile: close commit-graph in close_all_packs
commit-graph: use raw_object_store when closing
An incorrect list of options was cached after command line
completion failed (e.g. trying to complete a command that requires
a repository outside one), which has been corrected.
* nd/completion-no-cache-failure:
completion: do not cache if --git-completion-helper fails
"git mergetool" and its tests now spawn fewer subprocesses.
* js/mergetool-optim:
mergetool: use shell variable magic instead of `awk`
mergetool: dissect strings with shell variable magic instead of `expr`
t7610-mergetool: use test_cmp instead of test $(cat file) = $txt
t7610-mergetool: do not place pipelines headed by `yes` in subshells
Code restructuring during 2.20 period broke fetching tags via
"import" based transports.
* fc/fetch-with-import-fix:
fetch: fix regression with transport helpers
fetch: make the code more understandable
fetch: trivial cleanup
t5801 (remote-helpers): add test to fetch tags
t5801 (remote-helpers): cleanup refspec stuff
"git branch --list" learned to show branches that are checked out
in other worktrees connected to the same repository prefixed with
'+', similar to the way the currently checked out branch is shown
with '*' in front.
* nb/branch-show-other-worktrees-head:
branch: add worktree info on verbose output
branch: update output to include worktree info
ref-filter: add worktreepath atom
builtin/merge.c - cleanup of code in for-cycle that tests strategies
The cmd_merge() function has a loop that tries different
merge strategies in turn, and stops when a strategy gets a
clean merge, while keeping the "best" conflicted merge so
far.
Make the loop easier to follow by moving the code around,
ensuring that there is only one "break" in the loop where
an automerge succeeds. Also group the actions that are
performed after an automerge succeeds together to a single
location, outside and after the loop.
Signed-off-by: Edmundo Carmona Antoranz <eantoranz@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t3420: remove progress lines before comparing output
Some of the tests check the output of rebase is what we expect. These
were added after a regression that added unwanted stash output when
using --autostash. They are useful as they prevent unintended changes to
the output of the various rebase commands. However they also include all
the progress output which is less useful as it only tests what would be
written to a dumb terminal which is not the normal use case. The recent
changes to fix clearing the line when printing progress necessarily
meant making an ugly change to these tests. Address this my removing the
progress output before comparing it to the expected output. We do this
by removing everything before the final "\r" on each line as we don't
care about the progress indicator, but we do care about what is printed
immediately after it.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk> Signed-off-by: Junio C Hamano <gitster@pobox.com>
HOME initialization was historically duplicated in many different places,
including /etc/profile, launch scripts such as git-bash.vbs and gitk.cmd,
and (although slightly broken) in the git-wrapper.
Even unrelated projects such as GitExtensions and TortoiseGit need to
implement the same logic to be able to call git directly.
Initialize HOME in git's own startup code so that we can eventually retire
all the duplicate initialization code.
Signed-off-by: Karsten Blees <blees@dcon.de> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
mingw: fix possible buffer overrun when calling `GetUserNameW()`
In 39a98e9b68b8 (mingw: get pw_name in UTF-8 format, 2019-06-27), this
developer missed the fact that the `GetUserNameW()` function takes the
number of characters as `len` parameter, not the number of bytes.
Reported-by: Beat Bolli <dev+git@drbeat.li> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
ci/lib.sh: update a comment about installed P4 and Git-LFS versions
A comment in 'ci/lib.sh' claims that the "OS X build installs the
latest available versions" of P4 and Git-LFS, but since f2f47150
("ci: don't update Homebrew", 2019-07-03) that's no longer the case,
as it will install the versions which were recorded in the image's
Homebrew database when the image was created.
Update this comment accordingly.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
On native Windows, Git exclusively uses UTF-8 for console output (both
with MinTTY and native Win32 Console). Gettext uses `setlocale()` to
determine the output encoding for translated text, however, MSVCRT's
`setlocale()` does not support UTF-8. As a result, translated text is
encoded in system encoding (as per `GetAPC()`), and non-ASCII chars are
mangled in console output.
Side note: There is actually a code page for UTF-8: 65001. In practice,
it does not work as expected at least on Windows 7, though, so we cannot
use it in Git. Besides, if we overrode the code page, any process
spawned from Git would inherit that code page (as opposed to the code
page configured for the current user), which would quite possibly break
e.g. diff or merge helpers. So we really cannot override the code page.
In `init_gettext_charset()`, Git calls gettext's
`bind_textdomain_codeset()` with the character set obtained via
`locale_charset()`; Let's override that latter function to force the
encoding to UTF-8 on native Windows.
In Git for Windows' SDK, there is a `libcharset.h` and therefore we
define `HAVE_LIBCHARSET_H` in the MINGW-specific section in
`config.mak.uname`, therefore we need to add the override before that
conditionally-compiled code block.
Rather than simply defining `locale_charset()` to return the string
`"UTF-8"`, though, we are careful not to break `LC_ALL=C`: the
`ab/no-kwset` patch series, for example, needs to have a way to prevent
Git from expecting UTF-8-encoded input.
Signed-off-by: Karsten Blees <blees@dcon.de> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Lately Homebrew learned to automagically clean up information about
outdated packages during other 'brew' commands, which might be useful
for the avarage user, but is a waste of time in CI build jobs, because
the next build jobs will start from the exact same image containing
the same outdated packages anyway.
Export HOMEBREW_NO_INSTALL_CLEANUP=1 to disable this auto cleanup feature,
shaving off about 20-30s from the time needed to install dependencies
in our macOS build jobs on Travis CI.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Lately our GCC macOS build job on Travis CI has been erroring out
while installing dependencies with:
+brew link gcc@8
Error: No such keg: /usr/local/Cellar/gcc@8
The command "ci/install-dependencies.sh" failed and exited with 1 during .
Now, while gcc@8 is still pre-installed (but not linked) and would be
perfectly usable in the Travis CI macOS image we use [1], it's at
version 8.2. However, when installing dependencies we first
explicitly run 'brew update', which spends over two minutes to update
itself and information about the available packages, and it learns
about GCC 8.3. After that point gcc@8 exclusively refers to v8.3,
and, unfortunately, 'brew' is just too dumb to be able to do anything
with the still installed 8.2 package, and the subsequent 'brew link
gcc@8' fails. (Even 'brew uninstall gcc@8' fails with the same
error!)
Don't run 'brew update' to keep the already installed GCC 8.2 'brew
link'-able. Note that in addition we have to 'export
HOMEBREW_NO_AUTO_UPDATE=1' first, because 'brew' is so very helpful
that it would implicitly run update for us on the next 'brew install
<pkg>' otherwise.
Disabling 'brew update' has additional benefits:
- It shaves off 2-3mins from the ~4mins currently spent on
installing dependencies, and the macOS build jobs have always been
prone to exceeding the time limit on Travis CI.
- Our builds won't suddenly break because of the occasional Homebrew
breakages [2].
The drawback is that we'll be stuck with slightly older versions of
the packages that we install via Homebrew (Git-LFS 2.5.2 and Perforce
2018.1; they are currently at 2.7.2 and 2019.1, respectively). We
might want to reconsider this decision as time goes on and/or switch
to a more recent macOS image as they become available.
[1] 2000ac9fbf (travis-ci: switch to Xcode 10.1 macOS image,
2019-01-17)
[2] See e.g. a1ccaedd62 (travis-ci: make the OSX build jobs' 'brew
update' more quiet, 2019-02-02) or
Currenly the data rate in throughput_string(...) method is
output by simple strbuf_humanise_bytes(...) call and '/s' append.
But for proper translation of such string the translator needs
full context.
Add strbuf_humanise_rate(...) method to properly print out
localizable version of data rate ('3.5 MiB/s' etc) with full context.
Strings with the units in strbuf_humanise_bytes(...) are marked
for translation.
Signed-off-by: Dimitriy Ryazantcev <dimitriy.ryazantcev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
List the short form of options (e.g.: '-l') before the long form (e.g.
'--local').
This is to match the doc of git-add, git-commit, git-clean, git-branch...
Signed-off-by: Quentin Nerden <quentin.nerden@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous commit introduced a --skip flag for cherry-pick and
revert. Update the advice messages, to tell users about this less
cumbersome way of skipping commits. Also add tests to ensure
everything is working fine.
Signed-off-by: Rohit Ashiwal <rohit.ashiwal265@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git am or rebase have a --skip flag to skip the current commit if the
user wishes to do so. During a cherry-pick or revert a user could
likewise skip a commit, but needs to use 'git reset' (or in the case
of conflicts 'git reset --merge'), followed by 'git (cherry-pick |
revert) --continue' to skip the commit. This is more annoying and
sometimes confusing on the users' part. Add a `--skip` option to make
skipping commits easier for the user and to make the commands more
consistent.
In the next commit, we will change the advice messages hence finishing
the process of teaching revert and cherry-pick "how to skip commits".
Signed-off-by: Rohit Ashiwal <rohit.ashiwal265@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Avoid using magic numbers for array size and index under `reset_merge`
function. Use `argv_array` instead. This will make code shorter and
easier to extend.
Signed-off-by: Rohit Ashiwal <rohit.ashiwal265@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
sequencer: rename reset_for_rollback to reset_merge
We are on a path to teach cherry-pick/revert how to skip commits. To
achieve this, we could really make use of existing functions.
reset_for_rollback is one such function, but the name does not
intuitively suggest to use it to reset a merge, which it was born to
perform, see 539047c ("revert: introduce --abort to cancel a failed
cherry-pick", 2011-11-23). Change the name to reset_merge to make
it more intuitive.
Signed-off-by: Rohit Ashiwal <rohit.ashiwal265@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the case of merge conflicts, while performing a revert, we are
currently advised to use `git cherry-pick --<sequencer-options>`.
Introduce a separate advice message for `git revert`. Also change
the signature of `create_seq_dir` to handle which advice to display
selectively.
Signed-off-by: Rohit Ashiwal <rohit.ashiwal265@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t5319: use 'test-tool path-utils' instead of 'ls -l'
Using 'ls -l' and parsing the columns to find file sizes is
problematic when the platform could report the owner as a name
with spaces. Instead, use the 'test-tool path-utils file-size'
command to list only the sizes.
Reported-by: Johannes Sixt <j6t@kdbg.org> Helped-by: Johannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the user commits or resets a conflict resolution in the middle of a
sequence of cherry-picks or reverts then CHERRY_PICK_HEAD/REVERT_HEAD
will be removed and so in the absence of those files we need to check
.git/sequencer/todo to see if there is a cherry-pick or revert in
progress.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk> Signed-off-by: Junio C Hamano <gitster@pobox.com>