Factor out the logic for processing shallow, deepen, deepen_since, and
deepen_not lines into their own functions to simplify the
'receive_needs()' function in addition to making it easier to reuse some
of this logic when implementing protocol_v2.
Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
One of the design goals of protocol-v2 is to improve the semantics of
flush packets. Currently in protocol-v1, flush packets are used both to
indicate a break in a list of packet lines as well as an indication that
one side has finished speaking. This makes it particularly difficult
to implement proxies as a proxy would need to completely understand git
protocol instead of simply looking for a flush packet.
To do this, introduce the special deliminator packet '0001'. A delim
packet can then be used as a deliminator between lists of packet lines
while flush packets can be reserved to indicate the end of a response.
Documentation for how this packet will be used in protocol v2 will
included in a future patch.
Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
pkt-line: allow peeking a packet line without consuming it
Sometimes it is advantageous to be able to peek the next packet line
without consuming it (e.g. to be able to determine the protocol version
a server is speaking). In order to do that introduce 'struct
packet_reader' which is an abstraction around the normal packet reading
logic. This enables a caller to be able to peek a single line at a time
using 'packet_reader_peek()' and having a caller consume a line by
calling 'packet_reader_read()'.
Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current pkt-line API encodes the status of a pkt-line read in the
length of the read content. An error is indicated with '-1', a flush
with '0' (which can be confusing since a return value of '0' can also
indicate an empty pkt-line), and a positive integer for the length of
the read content otherwise. This doesn't leave much room for allowing
the addition of additional special packets in the future.
To solve this introduce 'packet_read_with_status()' which reads a packet
and returns the status of the read encoded as an 'enum packet_status'
type. This allows for easily identifying between special and normal
packets as well as errors. It also enables easily adding a new special
packet in the future.
Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git describe" was taught to dig trees deeper to find a
<commit-ish>:<path> that refers to a given blob object.
* sb/describe-blob:
builtin/describe.c: describe a blob
builtin/describe.c: factor out describe_commit
builtin/describe.c: print debug statements earlier
builtin/describe.c: rename `oid` to avoid variable shadowing
revision.h: introduce blob/tree walking in order of the commits
list-objects.c: factor out traverse_trees_and_blobs
t6120: fix typo in test name
"git merge" learned to pay attention to merge.verifySignatures
configuration variable and pretend as if '--verify-signatures'
option was given from the command line.
* hi/merge-verify-sig-config:
t5573, t7612: clean up after unexpected success of 'pull' and 'merge'
t: add tests for pull --verify-signatures
merge: add config option for verifySignatures
Error messages from "git rebase" have been somewhat cleaned up.
* ks/rebase-error-messages:
rebase: rebasing can also be done when HEAD is detached
rebase: distinguish user input by quoting it
rebase: consistently use branch_name variable
Introduce a helper to simplify code to parse a common pattern that
expects either "--key" or "--key=<something>".
* cc/skip-to-optional-val:
t4045: reindent to make helpers readable
diff: add tests for --relative without optional prefix value
diff: use skip_to_optional_arg_default() in parsing --relative
diff: use skip_to_optional_arg_default()
diff: use skip_to_optional_arg()
index-pack: use skip_to_optional_arg()
git-compat-util: introduce skip_to_optional_arg()
* sg/travis-fixes:
travis-ci: use 'set -x' in 'ci/*' scripts for extra tracing output
travis-ci: set GIT_TEST_HTTPD in 'ci/lib-travisci.sh'
travis-ci: move setting environment variables to 'ci/lib-travisci.sh'
travis-ci: introduce a $jobname variable for 'ci/*' scripts
* bw/submodule-sans-cache-compat:
submodule: convert get_next_submodule to not rely on the_index
submodule: used correct index in is_staging_gitmodules_ok
submodule: convert stage_updated_gitmodules to take a struct index_state
* ks/branch-cleanup:
builtin/branch: strip refs/heads/ using skip_prefix
branch: update warning message shown when copying a misnamed branch
branch: group related arguments of create_branch()
branch: improve documentation and naming of create_branch() parameters
With a configuration variable rebase.abbreviateCommands set,
"git rebase -i" produces the todo list with a single-letter
command names.
* lb/rebase-i-short-command-names:
sequencer.c: drop 'const' from function return type
t3404: add test case for abbreviated commands
rebase -i: learn to abbreviate command names
rebase -i -x: add exec commands via the rebase--helper
rebase -i: update functions to use a flags parameter
rebase -i: replace reference to sha1 with oid
rebase -i: refactor transform_todo_ids
rebase -i: set commit to null in exec commands
Documentation: use preferred name for the 'todo list' script
Documentation: move rebase.* configs to new file
In preparation for implementing narrow/partial clone, the object
walking machinery has been taught a way to tell it to "filter" some
objects from enumeration.
* jh/object-filtering:
rev-list: support --no-filter argument
list-objects-filter-options: support --no-filter
list-objects-filter-options: fix 'keword' typo in comment
pack-objects: add list-objects filtering
rev-list: add list-objects filtering support
list-objects: filter objects in traverse_commit_list
oidset: add iterator methods to oidset
oidmap: add oidmap iterator methods
dir: allow exclusions from blob in addition to file
sequencer.c: drop 'const' from function return type
With -Werror=ignored-qualifiers, a function that claims to return
"const char" gets this error:
CC sequencer.o
sequencer.c:798:19: error: type qualifiers ignored on function return
type [-Werror=ignored-qualifiers]
static const char command_to_char(const enum todo_command command)
^
Reported-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t5573, t7612: clean up after unexpected success of 'pull' and 'merge'
The previous steps added test_when_finished to tests that run 'git
pull' or 'git merge' with expectation of success, so that the test
after them can start from a known state even when their 'git pull'
invocation unexpectedly fails. However, tests that run 'git pull'
or 'git merge' expecting it not to succeed forgot to protect later
tests the same way---if they unexpectedly succeed, the test after
them would start from an unexpected state.
Reset and checkout the initial commit after all these tests, whether
they expect their invocations to succeed or fail.
Git shows a message to tell the user that it is waiting for the
user to finish editing when spawning an editor, in case the editor
opens to a hidden window or somewhere obscure and the user gets
lost.
* ls/editor-waiting-message:
launch_editor(): indicate that Git waits for user input
refactor "dumb" terminal determination
Ancient part of codebase still shows dots after an abbreviated
object name just to show that it is not a full object name, but
these ellipses are confusing to people who newly discovered Git
who are used to seeing abbreviated object names and find them
confusing with the range syntax.
* ar/unconfuse-three-dots:
t2020: test variations that matter
t4013: test new output from diff --abbrev --raw
diff: diff_aligned_abbrev: remove ellipsis after abbreviated SHA-1 value
t4013: prepare for upcoming "diff --raw --abbrev" output format change
checkout: describe_detached_head: remove ellipsis after committish
print_sha1_ellipsis: introduce helper
Documentation: user-manual: limit usage of ellipsis
Documentation: revisions: fix typo: "three dot" ---> "three-dot" (in line with "two-dot").
The way "git worktree add" determines what branch to create from
where and checkout in the new worktree has been updated a bit.
* tg/worktree-create-tracking:
add worktree.guessRemote config option
worktree: add --guess-remote flag to add subcommand
worktree: make add <path> <branch> dwim
worktree: add --[no-]track option to the add subcommand
worktree: add can be created from any commit-ish
checkout: factor out functions to new lib file
The code internal to the recursive merge strategy was not fully
prepared to see a path that is renamed to try overwriting another
path that is only different in case on case insensitive systems.
This does not matter in the current code, but will start to matter
once the rename detection logic starts taking hints from nearby
paths moving to some directory and moves a new path along with them.
Historically, the diff machinery for rename detection had a
hardcoded limit of 32k paths; this is being lifted to allow users
trade cycles with a (possibly) easier to read result.
* en/rename-progress:
diffcore-rename: make diff-tree -l0 mean -l<large>
sequencer: show rename progress during cherry picks
diff: remove silent clamp of renameLimit
progress: fix progress meters when dealing with lots of work
sequencer: warn when internal merge may be suboptimal due to renameLimit
Sometimes users are given a hash of an object and they want to
identify it further (ex.: Use verify-pack to find the largest blobs,
but what are these? or [1])
When describing commits, we try to anchor them to tags or refs, as these
are conceptually on a higher level than the commit. And if there is no ref
or tag that matches exactly, we're out of luck. So we employ a heuristic
to make up a name for the commit. These names are ambiguous, there might
be different tags or refs to anchor to, and there might be different
path in the DAG to travel to arrive at the commit precisely.
When describing a blob, we want to describe the blob from a higher layer
as well, which is a tuple of (commit, deep/path) as the tree objects
involved are rather uninteresting. The same blob can be referenced by
multiple commits, so how we decide which commit to use? This patch
implements a rather naive approach on this: As there are no back pointers
from blobs to commits in which the blob occurs, we'll start walking from
any tips available, listing the blobs in-order of the commit and once we
found the blob, we'll take the first commit that listed the blob. For
example
rebase: rebasing can also be done when HEAD is detached
Attempting to rebase when the HEAD is detached and is already
up to date with upstream (so there's nothing to do), the
following message is shown
Current branch HEAD is up to date.
which is clearly wrong as HEAD is not a branch.
Handle the special case of HEAD correctly to give a more precise
error message.
Signed-off-by: Kaartic Sivaraam <kaartic.sivaraam@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Kaartic Sivaraam <kaartic.sivaraam@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Kaartic Sivaraam <kaartic.sivaraam@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Kaartic Sivaraam <kaartic.sivaraam@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The variable "branch_name" holds the <branch> parameter in "git
rebase <upstream> <branch>", but one codepath did not use it after
assigning $1 to it (instead it kept using $1). Make it use the
variable consistently.
Also, update an error message to say there is no such branch or
commit, as we are expecting either of them, and not limiting
ourselves to a branch name.
Signed-off-by: Kaartic Sivaraam <kaartic.sivaraam@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Kaartic Sivaraam <kaartic.sivaraam@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Doc/check-ref-format: clarify information about @{-N} syntax
When the N-th previous thing checked out syntax (@{-N}) is used
with '--branch' option of check-ref-format the result may not be
the name of a branch that currently exists or ever existed. This
is because @{-N} is used to refer to the N-th last checked out
"thing", which might be a commit object name if the previous check
out was a detached HEAD state; or a branch name, otherwise. The
documentation thus does a wrong thing by promoting it as the
"previous branch syntax".
State that @{-N} is the syntax for specifying "N-th last thing
checked out" and also state that the result of using @{-N} might
also result in an commit object name.
Signed-off-by: Kaartic Sivaraam <kaartic.sivaraam@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The return code of command -v with a non-existing command is 1 in bash
and 127 in dash. Use that return code directly to allow the script to
work with dash and without watchman (e.g. on Debian).
While at it stop redirecting the output. stderr is redirected to
/dev/null by test_lazy_prereq already, and stdout can actually be
useful -- the path of the found watchman executable is sent there, but
it's shown only if the script was run with --verbose.
Signed-off-by: Rene Scharfe <l.s.r@web.de> Acked-by: Ben Peart <benpeart@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
curl_easy_perform() failed: URL using bad/illegal format or missing URL
This is a consequence of not URI-encoding the folder portion of
the URL which contains characters such as '[' which are not
allowed in a URI. According to RFC3986, these characters should be
URI-encoded.
So, URI-encode the folder before adding it to the URI to ensure it doesn't
contain characters that aren't allowed in a URI.
Reported-by: Doron Behar <doron.behar@gmail.com> Signed-off-by: Nicolas Morey-Chaisemartin <NMoreyChaisemartin@suse.com> Signed-off-by: Kaartic Sivaraam <kaartic.sivaraam@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
version --build-options: report commit, too, if possible
In particular when local tags are used (or tags that are pushed to some
fork) to build Git, it is very hard to figure out from which particular
revision a particular Git executable was built. It gets worse when those
tags are deleted, or even updated.
Let's just report an exact, unabbreviated commit name in our build
options.
We need to be careful, though, to report when the current commit cannot
be determined, e.g. when building from a tarball without any associated
Git repository. This could be the case also when extracting Git's source
code into an unrelated Git worktree.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
It can be helpful for bug reports to include information about the
environment in which the bug occurs. "git version --build-options" can
help to supplement this information. In addition to the size of 'long'
already reported by --build-options, also report the host's CPU type.
Example output:
$ git version --build-options
git version 2.9.3.windows.2.826.g06c0f2f
cpu: x86_64
sizeof-long: 4
New Makefile variable HOST_CPU supports cross-compiling.
Suggested-by: Adric Norris <landstander668@gmail.com> Signed-off-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the definition of the transport-specific functions provided by
transports, whether declared in transport.c or transport-helper.c, into
an internal header. This means that transport-using code (as opposed to
transport-declaring code) can no longer access these functions (without
importing the internal header themselves), making it clear that they
should use the transport_*() functions instead, and also allowing the
interface between the transport mechanism and an individual transport to
independently evolve.
This is superficially a reversal of commit 824d5776c3f2 ("Refactor
struct transport_ops inlined into struct transport", 2007-09-19).
However, the scope of the involved variables was neither affected nor
discussed in that commit, and I think that the advantages in making
those functions more private outweigh the advantages described in that
commit's commit message. A minor additional point is that the code has
gotten more complicated since then, in that the function-pointer
variables are potentially mutated twice (once initially and once if
transport_take_over() is invoked), increasing the value of corralling
them into their own struct.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Prior to commit a2d725b7bdf7 ("Use an external program to implement
fetching with curl", 2009-08-05), if Git was compiled with NO_CURL, the
get_refs_list and fetch methods in struct transport might not be
populated, hence the checks in clone and fetch. After that commit, all
transports populate get_refs_list and fetch, making the checks in clone
and fetch redundant. Remove those checks.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t/lib-git-svn.sh: improve svnserve tests with parallel make test
Setting SVNSERVE_PORT enables several tests which require a local
svnserve daemon to be run (in t9113 & t9126). The tests share setup of
the local svnserve via `start_svnserve()`. The function uses svnserve's
`--listen-once` option, which causes svnserve to accept one connection
on the port, serve it, and exit. When running the tests in parallel
this fails if one test tries to start svnserve while the other is still
running.
Use the test number as the svnserve port (similar to httpd tests) to
avoid port conflicts. Developers can set GIT_TEST_SVNSERVE to any value
other than 'false' or 'auto' to enable these tests.
Acked-by: Eric Wong <e@80x24.org> Reviewed-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Todd Zullinger <tmz@pobox.com>
git-svn: convert CRLF to LF in commit message to SVN
Subversion since 1.6 does not accept CR characters in the commit
message, so filter it out on our end before 'git svn dcommit' sets
the svn:log property.
Reported-by: Brian Bennett <Brian.Bennett@Transamerica.com> Signed-off-by: Eric Wong <e@80x24.org>
"git send-email" tries to see if the sendmail program is available
in /usr/lib and /usr/sbin; extend the list of locations to be
checked to also include directories on $PATH.
* fk/sendmail-from-path:
git-send-email: honor $PATH for sendmail binary
The tagnames "git log --decorate" uses to annotate the commits can
now be limited to subset of available refs with the two additional
options, --decorate-refs[-exclude]=<pattern>.
* ra/decorate-limit-refs:
log: add option to choose which refs to decorate
An infrastructure to define what hash function is used in Git is
introduced, and an effort to plumb that throughout various
codepaths has been started.
* bc/hash-algo:
repository: fix a sparse 'using integer as NULL pointer' warning
Switch empty tree and blob lookups to use hash abstraction
Integrate hash algorithm support with repo setup
Add structure representing hash algorithm
setup: expose enumerated repo info
After commit 0d0bac67ce3b ("transport: drop support for git-over-rsync",
2016-02-01), no transport in Git populates the "push" entry in the
transport vtable. Remove this entry.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com> Reviewed-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
install-doc-quick: allow specifying what ref to install
We allow the builders, who want to install the preformatted manpages
and html documents, to specify where in their filesystem these two
repositories are stored. Let them also specify which ref (or even a
revision) to grab the preformatted material from.
Signed-off-by: Randall S. Becker <rsbecker@nexbridge.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Compiled test helpers in t/helper are out of sync with the .gitignore
files quite frequently. This can happen when new test helpers are added,
but the explicit .gitignore file is not updated in the same commit, or
when you forget to 'make clean' before checking out a different version
of git, as the different version may have a different explicit list of
test helpers to ignore.
Fix this by having an overly broad ignore pattern in that directory:
Anything, except C and shell source, will be ignored.
Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
travis-ci: use 'set -x' in 'ci/*' scripts for extra tracing output
While the build logic was embedded in our '.travis.yml', Travis CI
used to produce a nice trace log including all commands executed in
those embedded scriptlets. Since 657343a60 (travis-ci: move Travis CI
code into dedicated scripts, 2017-09-10), however, we only see the
name of the dedicated scripts, but not what those scripts are actually
doing, resulting in a less useful trace log. A patch later in this
series will move setting environment variables from '.travis.yml' to
the 'ci/*' scripts, so not even those will be included in the trace
log.
Use 'set -x' in 'ci/lib-travisci.sh', which is sourced in most other
'ci/*' scripts, so we get trace log about the commands executed in all
of those scripts.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
travis-ci: set GIT_TEST_HTTPD in 'ci/lib-travisci.sh'
Commit 657343a60 (travis-ci: move Travis CI code into dedicated
scripts, 2017-09-10) converted '.travis.yml's default 'before_install'
scriptlet to the 'ci/install-dependencies.sh' script, and while doing
so moved setting GIT_TEST_HTTPD=YesPlease for the 64-bit GCC and Clang
Linux build jobs to that script. This is wrong for two reasons:
- The purpose of that script is, as its name suggests, to install
dependencies, not to set any environment variables influencing
which tests should be run (though, arguably, this was already an
issue with the original 'before_install' scriptlet).
- Setting the variable has no effect anymore, because that script is
run in a separate shell process, and the variable won't be visible
in any of the other scripts, notably in 'ci/run-tests.sh'
responsible for, well, running the tests.
Luckily, this didn't have a negative effect on our Travis CI build
jobs, because GIT_TEST_HTTPD is a tri-state variable defaulting to
"auto" and a functioning web server was installed in those Linux build
jobs, so the httpd tests were run anyway.
Apparently the httpd tests run just fine without GIT_TEST_HTTPD being
set, therefore we could simply remove this environment variable.
However, if a bug were to creep in to change the Travis CI build
environment to run the tests as root or to not install Apache, then
the httpd tests would be skipped and the build job would still
succeed. We would only notice if someone actually were to look
through the build job's trace log; but who would look at the trace log
of a successful build job?!
Since httpd tests are important, we do want to run them and we want to
be loudly reminded if they can't be run. Therefore, move setting
GIT_TEST_HTTPD=YesPlease for the 64-bit GCC and Clang Linux build jobs
to 'ci/lib-travisci.sh' to ensure that the build job fails when the
httpd tests can't be run. (We could set it in 'ci/run-tests.sh' just
as well, but it's better to keep all environment variables in one
place in 'ci/lib-travisci.sh'.)
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
travis-ci: move setting environment variables to 'ci/lib-travisci.sh'
Our '.travis.yml's 'env.global' section sets a bunch of environment
variables for all build jobs, though none of them actually affects all
build jobs. It's convenient for us, and in most cases it works just
fine, because irrelevant environment variables are simply ignored.
However, $GIT_SKIP_TESTS is an exception: it tells the test harness to
skip the two test scripts that are prone to occasional failures on
OSX, but as it's set for all build jobs those tests are not run in any
of the build jobs that are capable to run them reliably, either.
Therefore $GIT_SKIP_TESTS should only be set in the OSX build jobs,
but those build jobs are included in the build matrix implicitly (i.e.
by combining the matrix keys 'os' and 'compiler'), and there is no way
to set an environment variable only for a subset of those implicit
build jobs. (Unless we were to add new scriptlets to '.travis.yml',
which is exactly the opposite direction that we took with commit 657343a60 (travis-ci: move Travis CI code into dedicated scripts,
2017-09-10)).
So move setting $GIT_SKIP_TESTS to 'ci/lib-travisci.sh', where it can
trivially be set only for the OSX build jobs.
Furthermore, move setting all other environment variables from
'.travis.yml' to 'ci/lib-travisci.sh', too, because a couple of
environment variables are already set there, and this way all
environment variables will be set in the same place. All the logic
controlling our builds is already in the 'ci/*' scripts anyway, so
there is really no good reason to keep the environment variables
separately.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
travis-ci: introduce a $jobname variable for 'ci/*' scripts
A couple of 'ci/*' scripts are shared between different build jobs:
'ci/lib-travisci.sh', being a common library, is sourced from almost
every script, while 'ci/install-dependencies.sh', 'ci/run-build.sh'
and 'ci/run-tests.sh' are shared between the "regular" GCC and Clang
Linux and OSX build jobs, and the latter two scripts are used in the
GETTEXT_POISON Linux build job as well.
Our builds could benefit from these shared scripts being able to
easily tell which build job they are taking part in. Now, it's
already quite easy to tell apart Linux vs OSX and GCC vs Clang build
jobs, but it gets trickier with all the additional Linux-based build
jobs included explicitly in the build matrix.
Unfortunately, Travis CI doesn't provide much help in this regard.
The closest we've got is the $TRAVIS_JOB_NUMBER variable, the value of
which is two dot-separated integers, where the second integer
indicates a particular build job. While it would be possible to use
that second number to identify the build job in our shared scripts, it
doesn't seem like a good idea to rely on that:
- Though the build job numbering sequence seems to be stable so far,
Travis CI's documentation doesn't explicitly states that it is
indeed stable and will remain so in the future. And even if it
were stable,
- if we were to remove or insert a build job in the middle, then the
job numbers of all subsequent build jobs would change accordingly.
So roll our own means of simple build job identification and introduce
the $jobname environment variable in our builds, setting it in the
environments of the explicitly included jobs in '.travis.yml', while
constructing one in 'ci/lib-travisci.sh' as the combination of the OS
and compiler name for the GCC and Clang Linux and OSX build jobs. Use
$jobname instead of $TRAVIS_OS_NAME in scripts taking different
actions based on the OS and build job (when installing P4 and Git LFS
dependencies and including them in $PATH). The following two patches
will also rely on $jobname.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
submodule: convert get_next_submodule to not rely on the_index
Instead of implicitly relying on the global 'the_index', convert
'get_next_submodule()' to use the index of the repository stored in the
callback data 'struct submodule_parallel_fetch'.
Since this removes the last user of the index compatibility macros,
define 'NO_THE_INDEX_COMPATIBILITY_MACROS' to prevent future users of
these macros in submodule.c.
Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>