The switch statement towards the end of reset.c is missing case arms
for KEEP and MERGE for no obvious reason, and soon the only non-empty
case arm will be the one for HARD. So let's proactively replace it by
if-else, which will let us move one if statement out without leaving
funny-looking left-overs.
Signed-off-by: Martin von Zweigbergk <martinvonz@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
If writing or committing the new index file fails, we print "Could not
write new index file." followed by "Could not reset index file to
revision $rev.". The first message seems to imply the second, so print
only the first message.
Signed-off-by: Martin von Zweigbergk <martinvonz@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git reset --keep" calls reset_index_file() twice, first doing a
two-way merge to the target revision, updating the index and worktree,
and then resetting the index. After each call, we write the index
file.
In the unlikely event that the second call to reset_index_file()
fails, the index will have been merged to the target revision, but
HEAD will not be updated, leaving the user with a dirty index.
By moving the locking, writing and committing out of
reset_index_file() and into the caller, we can avoid writing the index
twice, thereby making the sure we don't end up in the half-way reset
state. As a bonus, we speed up "git reset --keep" a little on the
linux-2.6 repo (best of five, warm cache):
Before After
real 0m0.315s 0m0.296s
user 0m0.290s 0m0.280s
sys 0m0.020s 0m0.010s
Signed-off-by: Martin von Zweigbergk <martinvonz@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use a single condition to guard the call to die_if_unmerged_cache for
both --soft and --keep. This avoids the small distraction of the
precondition check from the logic following it.
Also change an instance of
if (e)
err = err || f();
to the almost as short, but clearer
if (e && !err)
err = f();
(which is equivalent since we only care whether exit code is 0)
Signed-off-by: Martin von Zweigbergk <martinvonz@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
reset.c: extract function for updating {ORIG_,}HEAD
By extracting the code for updating the HEAD and ORIG_HEAD symbolic
references to a separate function, we declutter cmd_reset() a bit and
we make it clear that e.g. the four variables {,sha1_}{,old_}orig are
only used by this code.
Signed-off-by: Martin von Zweigbergk <martinvonz@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Throughout most of parse_args(), the variable 'i' remains at 0. Many
references are still made to the variable even when it could only have
the value 0. This made at least me, who has relatively little
experience with C programming styles, think that parts of the function
was meant to be part of a loop. To avoid such confusion, remove the
variable and also the 'argc' parameter and check for NULL trailing
argv instead.
Signed-off-by: Martin von Zweigbergk <martinvonz@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
reset: don't allow "git reset -- $pathspec" in bare repo
Running e.g. "git reset ." in a bare repo results in an index file
being created from the HEAD commit. The differences compared to the
index are then printed as usual, but since there is no worktree, it
will appear as if all files are deleted. For example, in a bare clone
of git.git:
Unstaged changes after reset:
D .gitattributes
D .gitignore
D .mailmap
...
This happens because the check for is_bare_repository() happens after
we branch off into read_from_tree() to reset with paths. Fix by moving
the branching point after the check.
Signed-off-by: Martin von Zweigbergk <martinvonz@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
reset.c: pass pathspec around instead of (prefix, argv) pair
We use the path arguments in two places in reset.c: in
interactive_reset() and read_from_tree(). Both of these call
get_pathspec(), so we pass the (prefix, argv) pair to both
functions. Move the call to get_pathspec() out of these methods, for
two reasons: 1) One argument is simpler than two. 2) It lets us use
the (arguably clearer) "if (pathspec)" in place of "if (i < argc)".
Signed-off-by: Martin von Zweigbergk <martinvonz@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git reset $pathspec" currently exits with a non-zero exit code if the
worktree is dirty after resetting, which is inconsistent with reset
without pathspec, and it makes it harder to know whether the command
really failed. Change it to exit with code 0 regardless of whether the
worktree is dirty so that non-zero indicates an error.
This makes the 4 "disambiguation" test cases in t7102 clearer since
they all used to "fail", 3 of which "failed" due to changes in the
work tree. Now only the ambiguous one fails.
Signed-off-by: Martin von Zweigbergk <martinvonz@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 34110cd (Make 'unpack_trees()' have a separate source and
destination index, 2008-03-06), the index no longer gets clobbered by
do_diff_cache() and we can remove the code for discarding and
re-reading it.
There are two paths to update_index_refresh() from cmd_reset(), but on
both paths, either read_cache() or read_cache_unmerged() will have
been called, so the call to read_cache() in this method is redundant
(although practically free).
This speeds up "git reset -- ." a little on the linux-2.6 repo (best
of five, warm cache):
Before After
real 0m0.093s 0m0.080s
user 0m0.040s 0m0.020s
sys 0m0.050s 0m0.050s
Signed-off-by: Martin von Zweigbergk <martinvonz@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach various forms of "format-patch" command line to identify what
branch the patches are taken from, so that the branch description
is picked up in more cases.
* nd/maint-branch-desc-doc:
format-patch: pick up branch description when no ref is specified
format-patch: pick up correct branch name from symbolic ref
t4014: a few more tests on cover letter using branch description
branch: delete branch description if it's empty
config.txt: a few lines about branch.<name>.description
"git merge" started calling prepare-commit-msg hook like "git
commit" does some time ago, but forgot to pay attention to the exit
status of the hook. t7505 may want a general clean-up but that is
a different topic.
New remote helper for bzr, with minimum fix squashed in.
* fc/remote-bzr:
remote-bzr: detect local repositories
remote-bzr: add support for older versions of bzr
remote-bzr: add support to push special modes
remote-bzr: add support for fecthing special modes
remote-bzr: add simple tests
remote-bzr: update working tree upon pushing
remote-bzr: add support for remote repositories
remote-bzr: add support for pushing
Add new remote-bzr transport helper
Streamline the document and update with a few e-mail addresses the
patches should be sent to.
* jc/submittingpatches:
SubmittingPatches: give list and maintainer addresses
SubmittingPatches: remove overlong checklist
SubmittingPatches: mention subsystems with dedicated repositories
SubmittingPatches: who am I and who cares?
The '--done' option to git-fast-import is documented twice in its manual
page. Combine the best bits of each description, keeping the location
of the instance that was added first.
Signed-off-by: John Keeping <john@keeping.me.uk> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test fails for me on NetBSD 6.0.1 and reports:
ok 1 - ref name '' is invalid
ok 2 - ref name '/' is invalid
ok 3 - ref name '/' is invalid with options --allow-onelevel
ok 4 - ref name '/' is invalid with options --normalize
error: bug in the test script: not 2 or 3 parameters to test-expect-success
invalid_ref() constructs a test case description using its last argument,
but the shell seems to split it up into two pieces if it contains a
space. Minimal test case:
# on NetBSD with /bin/sh
$ a() { echo $#-$1-$2; }
$ t="x"; a "${t:+$t}"
1-x-
$ t="x y"; a "${t:+$t}"
2-x-y
$ t="x y"; a "${t:+x y}"
1-x y-
# and with bash
$ t="x y"; a "${t:+$t}"
1-x y-
$ t="x y"; a "${t:+x y}"
1-x y-
This may be a bug in the shell, but here's a simple workaround: Construct
the description string first and store it in a variable, and then use
that to call test_expect_success().
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the current German translation, the user was
addressed informally ("Du", "Dein") which is unusual
in German software. This commit changes the addressing
to be formal ("Sie", "Ihr").
Suggested-by: Christian Stimming <stimming@tuhh.de> Suggested-by: Michael J Gruber <git@drmicha.warpmail.net> Signed-off-by: Ralf Thielow <ralf.thielow@gmail.com>
Remove leftover bits from an earlier change to move gitk in its own
subdirectory. Reimplementing the dependency tracking rules needs
to be done in gitk history separately.
* cc/no-gitk-build-dependency:
Makefile: replace "echo 1>..." with "echo >..."
Makefile: detect when PYTHON_PATH changes
Makefile: remove tracking of TCLTK_PATH
Deal with a situation where .config/git is a file and we notice
.config/git/config is not readable due to ENOTDIR, not ENOENT.
* jn/warn-on-inaccessible-loosen:
config: exit on error accessing any config file
doc: advertise GIT_CONFIG_NOSYSTEM
config: treat user and xdg config permission problems as errors
config, gitignore: failure to access with ENOTDIR is ok
Fix to update_pre_post_images() that did not take into account the
possibility that whitespace fix could shrink the preimage and
change the number of lines in it.
* jc/apply-trailing-blank-removal:
apply.c:update_pre_post_images(): the preimage can be truncated
t6130-pathspec-noglob: Windows does not allow a file named "f*"
Windows disallows file names that contain a star. Arrange the test setup
to insert the file name "f*" in the repository without the corresponding
file in the worktree.
Signed-off-by: Johannes Sixt <j6t@kdbg.org> Acked-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The beginning of 'integrate with the tip of the remote branch, not
the commit recorded in the superproject gitlink' support.
* wk/submodule-update-remote:
submodule add: If --branch is given, record it in .gitmodules
submodule update: add --remote for submodule's upstream changes
submodule: add get_submodule_config helper funtion
Help compilers' flow analysis by making it more explicit that
error() always returns -1, to reduce false "variable used
uninitialized" warnings. Looks somewhat ugly but not too much.
* jk/error-const-return:
silence some -Wuninitialized false positives
make error()'s constant return value more visible
Allow us to read, and default to read, mailmap files from the tip
of the history in bare repositories. This will help running tools
like shortlog in server settings.
* jk/mailmap-from-blob:
mailmap: default mailmap.blob in bare repositories
mailmap: fix some documentation loose-ends for mailmap.blob
mailmap: clean up read_mailmap error handling
mailmap: support reading mailmap from blobs
mailmap: refactor mailmap parsing for non-file sources
Require "-f" for push to update a tag, even if it is a fast-forward.
* cr/push-force-tag-update:
push: allow already-exists advice to be disabled
push: rename config variable for more general use
push: cleanup push rules comment
push: clarify rejection of update to non-commit-ish
push: require force for annotated tags
push: require force for refs under refs/tags/
push: flag updates that require force
push: keep track of "update" state separately
push: add advice for rejected tag reference
push: return reject reasons as a bitset
Various updates to fast-export used in the context of the remote
helper interface.
* fc/fast-export-fixes:
fast-export: make sure updated refs get updated
fast-export: don't handle uninteresting refs
fast-export: fix comparison in tests
fast-export: trivial cleanup
remote-testgit: implement the "done" feature manually
remote-testgit: report success after an import
remote-testgit: exercise more features
remote-testgit: cleanup tests
remote-testgit: remove irrelevant test
remote-testgit: remove non-local functionality
Add new simplified git-remote-testgit
Rename git-remote-testgit to git-remote-testpy
remote-helpers: fix failure message
remote-testgit: fix direction of marks
fast-export: avoid importing blob marks
Update imap-send to reuse xml quoting code from http-push codepath,
clean up some code, and fix a small bug.
* mh/unify-xml-in-imap-send-and-http-push:
wrap_in_html(): process message in bulk rather than line-by-line
wrap_in_html(): use strbuf_addstr_xml_quoted()
imap-send: change msg_data from storing (ptr, len) to storing strbuf
imap-send: correctly report errors reading from stdin
imap-send: store all_msgs as a strbuf
lf_to_crlf(): NUL-terminate msg_data::data
xml_entities(): use function strbuf_addstr_xml_quoted()
Add new function strbuf_add_xml_quoted()
Optimize matching paths with common forms of pathspecs that contain
wildcard characters.
* nd/pathspec-wildcard:
tree_entry_interesting: do basedir compare on wildcard patterns when possible
pathspec: apply "*.c" optimization from exclude
pathspec: do exact comparison on the leading non-wildcard part
pathspec: save the non-wildcard length part
Output from the tests is coloured using "green is okay, yellow is
questionable, red is bad and blue is informative" scheme.
* as/test-tweaks:
tests: paint unexpectedly fixed known breakages in bold red
tests: test the test framework more thoroughly
tests: refactor mechanics of testing in a sub test-lib
tests: change info messages from yellow/brown to cyan
tests: paint skipped tests in blue
tests: paint known breakages in yellow
tests: test number comes first in 'not ok $count - $message'
The behaviour visible to the end users was confusing, when they
attempt to kill a process spawned in the editor that was in turn
launched by Git with SIGINT (or SIGQUIT), as Git would catch that
signal and die. We ignore these signals now.
* pf/editor-ignore-sigint:
launch_editor: propagate signals from editor to git
run-command: do not warn about child death from terminal
launch_editor: ignore terminal signals while editor has control
launch_editor: refactor to use start/finish_command
run-command: drop silent_exec_failure arg from wait_or_whine
Add a few more knobs for new platform ports can tweak.
* dm/port:
git-compat-util.h: do not #include <sys/param.h> by default
Generalize the inclusion of strings.h
Detect when the passwd struct is missing pw_gecos
Support builds when sys/param.h is missing
65969d4 (merge: honor prepare-commit-msg hook, 2011-02-14) tried to
make "git commit" and "git merge" consistent, because a merge that
required user assistance has to be concluded with "git commit", but
back then only "git commit" triggered prepare-commit-msg hook.
When it added a call to run the prepare-commit-msg hook, however, it
forgot to check the exit code from the hook like "git commit" does,
and ended up replacing one inconsistency with another.
When prepare-commit-msg hook that is run from "git merge" exits with
a non-zero status, abort the commit.
Signed-off-by: Antoine Pelisse <apelisse@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
format-patch: pick up branch description when no ref is specified
We only try to get branch name in "format-patch origin" case or
similar and not "format-patch -22" where HEAD is automatically
added. Without correct branch name, branch description cannot be
added. Make sure we always get branch name.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test Makefile knows about a few "lint" checks for common
errors. However, they are not enabled as part of "make test"
by default, which means that many people do not bother
running them. Since they are both quick to run and accurate
(i.e., no false positives), there should be no harm in
turning them on and helping submitters catch errors earlier.
We could just set:
TEST_LINT = test-lint
to enable all tests. But that would be unnecessarily
annoying later on if we add slower or less accurate tests
that should not be part of the default. Instead, we name the
tests individually.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
format-patch: pick up correct branch name from symbolic ref
find_branch_name() assumes to take refs/heads/<branch>. But we also
have symbolic refs, such as HEAD, that can point to a valid branch in
refs/heads and do not follow refs/heads/<branch> syntax. Remove the
assumption and apply normal ref resolution. After all it would be
confusing if rev machinery resolves a ref in one way and
find_branch_name() another.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a line to be wrapped has a solid run of non space characters
whose length exactly is the wrap width, "git shortlog -w" failed to
add a newline after such a line.
* sp/shortlog-missing-lf:
strbuf_add_wrapped*(): Remove unused return value
shortlog: fix wrapping lines of wraplen
"gitweb", when sorting by age to show repositories with new
activities first, used to sort repositories with absolutely nothing
in it early, which was not very useful.
* md/gitweb-sort-by-age:
gitweb: Sort projects with undefined ages last
After "git add -N" and then writing a tree object out of the
index, the cache-tree data structure got corrupted.
* nd/invalidate-i-t-a-cache-tree:
cache-tree: invalidate i-t-a paths after generating trees
cache-tree: fix writing cache-tree when CE_REMOVE is present
cache-tree: replace "for" loops in update_one with "while" loops
cache-tree: remove dead i-t-a code in verify_cache()
The way "git svn" asked for password using SSH_ASKPASS and
GIT_ASKPASS was not in line with the rest of the system.
* ss/svn-prompt:
git-svn, perl/Git.pm: extend and use Git->prompt method for querying users
perl/Git.pm: Honor SSH_ASKPASS as fallback if GIT_ASKPASS is not set
git-svn, perl/Git.pm: add central method for prompting passwords
t9200 runs "cvs init" on a directory that already exists, but a
platform can configure this fail for the current user (e.g. you need
to be in the cvsadmin group on NetBSD 6.0).
* jc/test-cvs-no-init-in-existing-dir:
t9200: let "cvs init" create the test repository
An element on GIT_CEILING_DIRECTORIES list that does not name the
real path to a directory (i.e. a symbolic link) could have caused
the GIT_DIR discovery logic to escape the ceiling.
* mh/ceiling:
string_list_longest_prefix(): remove function
setup_git_directory_gently_1(): resolve symlinks in ceiling paths
longest_ancestor_length(): require prefix list entries to be normalized
longest_ancestor_length(): take a string_list argument for prefixes
longest_ancestor_length(): use string_list_split()
Introduce new function real_path_if_valid()
real_path_internal(): add comment explaining use of cwd
Introduce new static function real_path_internal()